I have a scheduled LotusScript agent that I want to loop through documents in a view and extract the attached file(s) to a folder on the server:
'extract file
If Not IsEmpty(rtitem.embeddedObjects) Then
ForAll o In rtitem.EmbeddedObjects
If (o.Type = EMBED_ATTACHMENT) Then
Call o.ExtractFile("\\TestServer\TestFolder\"+o.name)
End If
End ForAll
End If
This agent works fine when ran through the Notes client. However, when the agent is scheduled I get the following error: "Error: 4005 - Notes error: Logon failure: unknown user name or bad password". It errors at the "Call o.ExtractFile(..." line above.
I've tried changing the security level on the agent to "Allow restricted operations with full admin rights" and "Run as Web user" but the error persists.
Any thoughts are greatly appreciated.
This appears to be a network error and not an error within Lotus Notes. Make sure the account under which the server is running has access to the share.
This is very common issue: If you are going to extract the file on
some location then also check the drive is exists on server or not.
Make sure you have proper rights to create a file on the folder, it means folder should have full access.
Agent should have proper rights.
Related
How can I resolve this error:
Msg 5123, Level 16, State 1, Line 1 CREATE FILE encountered operating system error 5(Access is denied.)
while attempting to open or create the physical file 'C:\Banking.mdf'.
You need to ensure that you have the appropriate account permissions on the account in order to access the folder the mdf file is located in.
More detail can be found in the following link.
https://dba.stackexchange.com/questions/22250/sql-server-create-file-encountered-operating-system-error-5-access-is-denied
I encountered the same error when I called 'update-database' the first time I tried to run Entity Framework Core / EF Core.
I solved it!
The full error message was:
CREATE FILE encountered operating system error 5(Access is denied.) while attempting to open or create the physical file 'C:\Users\peterObjectData.mdf'.
Creating files in C:\Users\ directory requires admin rights.
To fix this, one can add a file location and name for the mdf file in the connection string:
optionsBuilder.UseSqlServer("Server = (localdb)\mssqllocaldb; Database = ObjectData; Trusted_Connection = True; AttachDbFileName=D:\Databases\ObjectDB.mdf");
Here, "D:\Databases\ObjectDB.mdf" is the location and filename of the .mdf file created. This fixed my issue.
If you want to read more on ConnectionStrings and AttachDbFileName, here's the documentation:
https://learn.microsoft.com/en-us/dotnet/api/system.data.sqlclient.sqlconnection.connectionstring?view=netframework-4.7.2#examples
That must be your C drive denied the SQL server to create file. You can either change the direction to other drive(D:;E:) or if you dont want to, then you have to change the security properties for your C:\ drive. Right click C:, choose properties, security, change authenticate user and user to full control then you good
I would like to create a view in SQL Server 2008 that displays the data contained in an Excel file.
I do not want to use the import data as these data are updated.
I found this: http://support.microsoft.com/kb/321686/en
I made these commands to enable some options :
sp_configure 'show advanced options', 1
RECONFIGURE
GO
sp_configure 'ad hoc distributed queries', 1
RECONFIGURE
GO
But when I try to read the Excel file with this query:
SELECT * FROM INTO XLImport3 OPENDATASOURCE ('Microsoft.Jet.OLEDB.4.0', 'Data Source=C:\Documents and Settings\jconnor\Desktop\Test.xlsx') ... [Sheet1$]
I back (it's a translation from french) :
The OLE DB provider " Microsoft.Jet.OLEDB.4.0 " for linked server " (null) " returned >message " Unspecified error " .
Msg 7303 , Level 16 , State 1, Line 1
Unable to initialize the object data source OLE DB provider " Microsoft.Jet.OLEDB.4.0 " for >linked server " (null) " .
Does someone have any clue ?
Thank you in advance
Kal,
So your main error is likely this;
OLE DB provider "MICROSOFT.JET.OLEDB.4.0" for linked server "(null)" returned message "Unspecified error".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MICROSOFT.JET.OLEDB.4.0" for linked server "(null)".
I would check some permissions.
Check the permissions on the Temp folder
This is needed because the provider uses the temp folder while retrieving the data. The folder can be one of the below based on whether you use a local system account or network domain account.
For network accounts, folder is
\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp
and for local system account its \Windows\ServiceProfiles\LocalService\AppData\Local\Temp
Right click on this folder and give it read write access to the account (or group) executing the code. That solved the error for me.
Also
http://blogs.msdn.com/b/spike/archive/2008/07/23/ole-db-provider-microsoft-jet-oledb-4-0-for-linked-server-null-returned-message-unspecified-error.aspx
This is because the SQL Server Service is trying to write the temp DSN to the temp folder for the login that started the service, in this case the Admin/Admin login.
The temp folder is something like: C:\Documents and Settings\Admin\Local Settings\Temp
.15 As mentioned, the OleDbProvider will always execute in the context of the user who initialized it, in this case User/User.
.16 User/User has no rights on this folder (C:\Documents and Settings\Admin\Local Settings\Temp).
If running FileMon when the SQL is executed, we can see the following:
(Actually, try using Process Monitor - http://technet.microsoft.com/en-us/sysinternals/bb896645)
sqlservr.exe:000 QUERY INFORMATION C:\DOCUME~1\Admini~1\LOCALS~1\Temp ACCESS DENIED Attributes: Error
So to summarize so far:
The SQL Server service is started as Admin/Admin, when the select is made, the OleDb provider is invoked by User/User.
Now the OleDb provider attempts to create a temporary DSN in the temp directory. This will be the temp directory for the SQL Server service (Admin/Admin)
but the user (in this case User/User) does not have write permissions on this folder. And the error occurs.
There are two ways to resolve this.
Option 1:
Log out of the machine and log in as the account that starts the SQL Server Service (in this case Admin/Admin) then start a command prompt
and type “set t” (no quotes), this will show something like:
TEMP=C:\DOCUME~1\Admin\LOCALS~1\Temp
TMP=C:\DOCUME~1\Admin\LOCALS~1\Temp
these are the environment variables set for %TEMP% and %TMP%, so go to that folder and right click and select Properties -> Security,
then add the user, in this case User/User, note that the default for the user is Read&Execute/List Folder Content/Read, this not enough, you have to select Write as well.
Log out, and log in again as User/User and rerun the command from SSMS. This time it should work.
Option 2:
Log on as Admin and change the TEMP and TMP variable to, for example, C:\Temp, basically this moves the Temp directory out of the Documents and Settings folder.
However, you must restart the SQL server for this to take effect.
So basically, what happens is that when SQL Server starts, it uses the Temp folder of the startup account (Admin/Admin) but the MICROSOFT.JET.OLEDB.4.0 will always execute
as the user who calls the SQL command (User/User) and this will fail unless this user does not have Write access to that temp folder.
Without knowing all setups out there, perhaps option 2 is the preferred solution since with option 1, you will have to add ALL the users that will invoke the provider which may not be practical.
Also, when changing the startup account for the SQL Server service, then the TEMP directory for that account will be used, and you will see the error again until you, again, give write permissions for all the users on this TEMP folder...or a user group (preferred).
I am trying to execute this command from a web application on sourceServer:
var mgr = ServerManager.OpenRemote(destServer)
but I receive this error:
UnAuthorized access wth a detail error: "Retrieving the COM class factory for remote component with CLSID {2B72133B-3F5B-4602-8952-803546CE3344} from machine failed due to the following error: 80070005"
I have full administrative rights on both servers.
I can issue that command from a console application no problem, but when I try it from the web application, I get the error!
I have tried enabling the remote management checkbox and started teh remote access auto connection manager and also tried updating the load user profile on the applicaiton pool from false to true.
I have searched so much to the point that all of my links are pink in color!
Any input is greatly appreciated.
I've decided to ditch the use of ServerManager.OpenRemote() and use the DirectoryEntry way:
DirectoryEntry root = new DirectoryEntry("IIS://server/W3SVC", username, password)
it is much simpler and straightforward.
I'm getting the following error when attempting to run DotNetNuke 7.1 from IIS.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
Line 572: //first call GetProviderPath - this insures that the Database is Initialised correctly
Line 573: //and also generates the appropriate error message if it cannot be initialised correctly
Line 574: string strMessage = DataProvider.Instance().GetProviderPath();
Line 575: //get current database version from DB
Line 576: if (!strMessage.StartsWith("ERROR:"))
I've tried running it from Visual Studio 2012 after downloading and extracting the source code to a folder, then running, but I get the same error (also, VS loads about 13 instances of it's built in webserver which can't be correct).
Clearly, there is something wrong with the database. From what I've read in the past, there should have been a start up configuration page (for configuring settings the first time you run the project).
I did look at the local version of IIS (running on Windows 8) and it created the site fine there, however, for some reason the internal webserver attempts to run (and the option to run on an external IIS is greyed out).
Anyone run into this problem with DNN Community edition? I've tried running as admin and setting permissions with no luck at all.
Any way to fix this?
Ok, the key is to delete the Database.mdf file completely.
Then create a new empty database of your choice in SQL Server (2008 or greater).
Create a new user account with db_owner access (as it must be able to create tables, etc).
Change the connection strings in the release.config and development.config to connect to the database.
DELETE the web.config file.
RENAME either config file to "web.config"
Set the default project to the web project in VS
set the default page to default.aspx
Run
I made the erroneous assumption that running the app would rename the config file for me (not sure why I assumed that).
SOLVED!
I have a SharePoint 2013 installation on a Window 8 machine.
I am trying to create a web application and it is taking forever. The creation process never stops. I checked in application event logs and found this error:
*Machine 'SHAREPOINT2013C (SharePoint - 43000(_LM_W3SVC_1458308317_ROOT))' failed ping validation and has been unavailable since '1/22/2013 3:56:48 AM'.*
Searched the web but could not find anything that works for me.
Can anyone suggest a way to resolve the issue? Thanks a lot in advance.
Below are my findings:
In order to recognize routing targets IIS has to be able to process SPPING HTTP method
To test run this code in Powershell:
$url = "http://your-Routing-Target-Server-Name"
$myReq = [System.Net.HttpWebRequest]::Create($url)
$myReq.Method = "SPPING";
$response = $myReq.GetResponse();
$response.StatusCode
If you get the following error message:
Exception calling "GetResponse" with "0" argument(s): "The remote server returned an error: (405) Method Not Allowed."
that means that web front end is not set up to process SPPING HTTP method
To resolve the issue run the following commands on each routing target server:
Import-Module WebAdministration
add-WebConfiguration /system.webserver/handlers "IIS:\" -value #{
name = "SPPINGVerbHandler"
verb = "SPPING"
path = "*"
modules = "ProtocolSupportModule"
requireAccess = "None"
}
This will add a handler for SPPING verb to IIS configuration.
Run the test script again to make sure this works.
So this has to do with the Request Management Service that runs on the WFE servers on SharePoint 2013. The Request Management Service is of no value since you only have one server. If you disable this service on your single server farm these messages will go away and your Web Application creation performance will greatly increase.
Mark Ringo
I recently faced this issue, I created new Web Application and it was showing a popup of "It shouldn't take long", then after some time it showed a Connection failure page. I browsed to the virtual directory folder for the new web application and found that the folder was totally empty.
Then what I did to solve this problem:
1. Open IIS
2. Go to Applicatin Pools
3. Select Central Admin application pool and right click and select "Advance Settings".
4. There was a property named "Shutdown Time Limit", it was set to "90" by default. I changed it to 400 and clicked OK.
It restarted the applicaition pool automatically. Then again I created new web application from central admin and it worked for me.
I've found that these events correlate to when the specified application pools are recycled (mine are at a specific time in the morning). It's unfortunate that they're logged in the event viewer and can't really clean it up.