I have a bash script that puts a bunch of commands to make a directory into a text file. Then it cats the file into sh to run the commands. What I am trying to do is only run the command if the directory doesn't already exist.
Here is what I have:
A text file with something like this:
mkdir /path/to/a/directory
mkdir /path/to/another/directory
mkdir /path/to/yet/another/directory
In my script I have a line like this
cat /path/to/my/file.txt | sh
But is there a way to do something like this?
cat /path/to/my/file.txt | if path already exists then go to the next, if not | sh
In other words I would like to skip the attempt to make the directory if the path already exists.
Update: The OP has since clarified that use of mkdir is just an example, and that he needs a generic mechanism to conditionally execute lines from a text file containing shell commands, based on whether the commands refers to an existing directory or not:
while read -r cmd dir; do [[ -d $dir ]] || eval "$cmd $path"; done < /path/to/my/file.txt
The while loop reads the text file containing the shell commands line by line.
read -r cmd dir parses each line into the first token - assumed to be the command (mkdir in the sample input) - and the rest, assumed to be the directory path.
[[ -d $dir ]] tests the existence of the directory path, and || only executes its RHS if the test fails, i.e., if the directory does not exist.
eval "$cmd $path" then executes the line; note that use of eval here is not any less secure than piping to sh - in both cases you must trust the strings representing the commands. (Using eval from the current Bash shell means that Bash will execute the command, not sh, but I'm assuming that's not a problem.)
Original answer, based on the assumption that mkdir is actually used:
The simplest approach in your case is to add the -p option to your mkdir calls, which will quietly ignore attempts to create a directory that already exists:
mkdir -p /path/to/a/directory
mkdir -p /path/to/another/directory
mkdir -p /path/to/yet/another/directory
To put it differently: mkdir -p ensures existence of the target dir., whether that dir. already exists or has to be created.
(mkdir -p can still fail, such as when the target path is a file rather than a dir., or if you have insufficient permissions to create the dir.)
You can then simply pass the file to sh (no need for cat and a pipe, which is less efficient):
sh /path/to/my/file.txt
In case you do not control creation of the input file, you can use sed to insert the -p option:
sed 's/^mkdir /&-p /' /path/to/my/file.txt | sh
I'm not clear if you want to check for the existence of files or directories.. but here's how to to it:
Run your command if the file exists:
[ -f /path/to/my/file.txt ] && cat /path/to/my/file.txt | sh
or to check for directories:
[ -d /path/to/my/directory ] && cat /path/to/my/file.txt | sh
Write your own mkdir function.
Assuming your file doesn't use mkdir -p anywhere this should work.
mkdir() {
for dir; do
[ -d "$dir" ] || mkdir "$dir"
done
}
export -f mkdir
sh < file
I started using "sudo rm -r" to delete files/directories. I even put it as an alias of rm.
I normally know what I am doing and I am quite experience linux user.
However, I would like that when I press the "ENTER", before the execution of rm, a list of files will show up on the screen and a prompt at the end to OK the deletion of files.
Options -i -I -v does not do what I want. I want only one prompt for all the printed files on screen.
Thank you.
##
# Double-check files to delete.
delcheck() {
printf 'Here are the %d files you said you wanted to delete:\n' "$#"
printf '"%s"\n' "$#"
read -p 'Do you want to delete them? [y/N] ' doit
case "$doit" in
[yY]) rm "$#";;
*) printf 'No files deleted\n';;
esac
}
This is a shell function that (when used properly) will do what you want. However, if you load the function in your current shell then try to use it with sudo, it won't do what you expect because sudo creates a separate shell. So you'd need to make this a shell script…
#!/bin/bash
… same code as above …
# All this script does is create the function and then execute it.
# It's lazy, but functions are nice.
delcheck "$#"
…then make sure sudo can access it. Put it in some place that is in the sudo execution PATH (Depending on sudo configuration.) Then if you really want to execute it precisely as sudo rm -r * you will still need to name the script rm, (which in my opinion is dangerous) and make sure its PATH is before /bin in your PATH. (Also dangerous). But there you go.
Here's a nice option
Alias rm to echo | xargs -p rm
The -p option means "interactive" - it will display the entire command (including any expanded file lists) and ask you to confirm
It will NOT ask about the recursively removed files. But it will expand rm * .o to:
rm -rf * .o
rm -rf program.cc program.cc~ program program.o backup?... # NO NO NO NO NO!
Which is much nicer than receiving the error
rm: .o file not found
Edit: corrected the solution based on chepner comment. My previous solutions had a bug :(
This simple script prompts for a y response before deleting the files specified.
rmc script file:
read -p "ok to delete? " ans
case $ans in
[yY]*) sudo rm "$#" ;;
*) echo "Nothing deleted";;
esac
Invoke thus
./rmc *.tmp
I created a script to do this. The solution is similar to #kojiro's.
Save the script with the filename del. Run the command sudo chmod a=r+w+x del to make the script an executable. In the directory in which you want to save the script, export the path by entering export PATH=$PATH:/path/to/the/del/executable in your '~/.bashrc' file and run source ~/.bashrc.
Here, the syntax of rm is preserved, except instead of typing rm ..., type del ... where del is the name of the bash script below.
#! /bin/bash
# Safely delete files
args=("$#") # store all arguments passed to shell
N=$# # number of arguments passed to shell
#echo $#
#echo $#
#echo ${args[#]:0}
echo "Files to delete:"
echo
n=`expr $N - 1`
for i in `seq 0 $n`
do
str=${args[i]}
if [ ${str:0:1} != "-" ]; then
echo $str
fi
done
echo
read -r -p "Delete these files? [y/n] " response
case $response in
[yY][eE][sS]|[yY])
rm ${args[#]:0}
esac
I have written a Bash script that takes an input file as an argument and reads it.
This file contains some paths (relative to its location) to other files.
I would like the script to go to the folder containing the input file, to execute further commands.
In Linux, how do I get the folder (and just the folder) from an input file?
To get the full path use:
readlink -f relative/path/to/file
To get the directory of a file:
dirname relative/path/to/file
You can also combine the two:
dirname $(readlink -f relative/path/to/file)
If readlink -f is not available on your system you can use this*:
function myreadlink() {
(
cd "$(dirname $1)" # or cd "${1%/*}"
echo "$PWD/$(basename $1)" # or echo "$PWD/${1##*/}"
)
}
Note that if you only need to move to a directory of a file specified as a relative path, you don't need to know the absolute path, a relative path is perfectly legal, so just use:
cd $(dirname relative/path/to/file)
if you wish to go back (while the script is running) to the original path, use pushd instead of cd, and popd when you are done.
* While myreadlink above is good enough in the context of this question, it has some limitation relative to the readlink tool suggested above. For example it doesn't correctly follow a link to a file with different basename.
Take a look at realpath which is available on GNU/Linux, FreeBSD and NetBSD, but not OpenBSD 6.8. I use something like:
CONTAININGDIR=$(realpath ${FILEPATH%/*})
to do what it sounds like you're trying to do.
This will work for both file and folder:
absPath(){
if [[ -d "$1" ]]; then
cd "$1"
echo "$(pwd -P)"
else
cd "$(dirname "$1")"
echo "$(pwd -P)/$(basename "$1")"
fi
}
$cat abs.sh
#!/bin/bash
echo "$(cd "$(dirname "$1")"; pwd -P)"
Some explanations:
This script get relative path as argument "$1"
Then we get dirname part of that path (you can pass either dir or file to this script): dirname "$1"
Then we cd "$(dirname "$1"); into this relative dir
pwd -P and get absolute path. The -P option will avoid symlinks
As final step we echo it
Then run your script:
abs.sh your_file.txt
Try our new Bash library product realpath-lib over at GitHub that we have given to the community for free and unencumbered use. It's clean, simple and well documented so it's great to learn from. You can do:
get_realpath <absolute|relative|symlink|local file path>
This function is the core of the library:
if [[ -f "$1" ]]
then
# file *must* exist
if cd "$(echo "${1%/*}")" &>/dev/null
then
# file *may* not be local
# exception is ./file.ext
# try 'cd .; cd -;' *works!*
local tmppwd="$PWD"
cd - &>/dev/null
else
# file *must* be local
local tmppwd="$PWD"
fi
else
# file *cannot* exist
return 1 # failure
fi
# reassemble realpath
echo "$tmppwd"/"${1##*/}"
return 0 # success
}
It's Bash 4+, does not require any dependencies and also provides get_dirname, get_filename, get_stemname and validate_path.
Problem with the above answer comes with files input with "./" like "./my-file.txt"
Workaround (of many):
myfile="./somefile.txt"
FOLDER="$(dirname $(readlink -f "${ARG}"))"
echo ${FOLDER}
I have been using readlink -f works on linux
so
FULL_PATH=$(readlink -f filename)
DIR=$(dirname $FULL_PATH)
PWD=$(pwd)
cd $DIR
#<do more work>
cd $PWD
I want a command (or probably an option to cp) that creates the destination directory if it does not exist.
Example:
cp -? file /path/to/copy/file/to/is/very/deep/there
mkdir -p "$d" && cp file "$d"
(there's no such option for cp).
If both of the following are true:
You are using the GNU version of cp (and not, for instance, the Mac version), and
You are copying from some existing directory structure and you just need it recreated
then you can do this with the --parents flag of cp. From the info page (viewable at http://www.gnu.org/software/coreutils/manual/html_node/cp-invocation.html#cp-invocation or with info cp or man cp):
--parents
Form the name of each destination file by appending to the target
directory a slash and the specified name of the source file. The
last argument given to `cp' must be the name of an existing
directory. For example, the command:
cp --parents a/b/c existing_dir
copies the file `a/b/c' to `existing_dir/a/b/c', creating any
missing intermediate directories.
Example:
/tmp $ mkdir foo
/tmp $ mkdir foo/foo
/tmp $ touch foo/foo/foo.txt
/tmp $ mkdir bar
/tmp $ cp --parents foo/foo/foo.txt bar
/tmp $ ls bar/foo/foo
foo.txt
Short Answer
To copy myfile.txt to /foo/bar/myfile.txt, use:
mkdir -p /foo/bar && cp myfile.txt $_
How does this work?
There's a few components to this, so I'll cover all the syntax step by step.
The mkdir utility, as specified in the POSIX standard, makes directories. The -p argument, per the docs, will cause mkdir to
Create any missing intermediate pathname components
meaning that when calling mkdir -p /foo/bar, mkdir will create /foo and /foo/bar if /foo doesn't already exist. (Without -p, it will instead throw an error.
The && list operator, as documented in the POSIX standard (or the Bash manual if you prefer), has the effect that cp myfile.txt $_ only gets executed if mkdir -p /foo/bar executes successfully. This means the cp command won't try to execute if mkdir fails for one of the many reasons it might fail.
Finally, the $_ we pass as the second argument to cp is a "special parameter" which can be handy for avoiding repeating long arguments (like file paths) without having to store them in a variable. Per the Bash manual, it:
expands to the last argument to the previous command
In this case, that's the /foo/bar we passed to mkdir. So the cp command expands to cp myfile.txt /foo/bar, which copies myfile.txt into the newly created /foo/bar directory.
Note that $_ is not part of the POSIX standard, so theoretically a Unix variant might have a shell that doesn't support this construct. However, I don't know of any modern shells that don't support $_; certainly Bash, Dash, and zsh all do.
A final note: the command I've given at the start of this answer assumes that your directory names don't have spaces in. If you're dealing with names with spaces, you'll need to quote them so that the different words aren't treated as different arguments to mkdir or cp. So your command would actually look like:
mkdir -p "/my directory/name with/spaces" && cp "my filename with spaces.txt" "$_"
Such an old question, but maybe I can propose an alternative solution.
You can use the install programme to copy your file and create the destination path "on the fly".
install -D file /path/to/copy/file/to/is/very/deep/there/file
There are some aspects to take in consideration, though:
you need to specify also the destination file name, not only the destination path
the destination file will be executable (at least, as far as I saw from my tests)
You can easily amend the #2 by adding the -m option to set permissions on the destination file (example: -m 664 will create the destination file with permissions rw-rw-r--, just like creating a new file with touch).
And here it is the shameless link to the answer I was inspired by =)
Shell function that does what you want, calling it a "bury" copy because it digs a hole for the file to live in:
bury_copy() { mkdir -p `dirname $2` && cp "$1" "$2"; }
Here's one way to do it:
mkdir -p `dirname /path/to/copy/file/to/is/very/deep/there` \
&& cp -r file /path/to/copy/file/to/is/very/deep/there
dirname will give you the parent of the destination directory or file. mkdir -p `dirname ...` will then create that directory ensuring that when you call cp -r the correct base directory is in place.
The advantage of this over --parents is that it works for the case where the last element in the destination path is a filename.
And it'll work on OS X.
with all my respect for answers above, I prefer to use rsync as follow:
$ rsync -a directory_name /path_where_to_inject_your_directory/
example:
$ rsync -a test /usr/local/lib/
install -D file -m 644 -t /path/to/copy/file/to/is/very/deep/there
This does it for me
cp -vaR ./from ./to
This is very late but it may help a rookie somewhere. If you need to AUTO create folders rsync should be your best friend.
rsync /path/to/sourcefile /path/to/tragetdir/thatdoestexist/
Simply add the following in your .bashrc, tweak if you need. Works in Ubuntu.
mkcp() {
test -d "$2" || mkdir -p "$2"
cp -r "$1" "$2"
}
E.g
If you want to copy 'test' file to destination directory 'd'
Use,
mkcp test a/b/c/d
mkcp will first check if destination directory exists or not, if not then make it and copy source file/directory.
Just to resume and give a complete working solution, in one line.
Be careful if you want to rename your file, you should include a way to provide a clean dir path to mkdir. $fdst can be file or dir.
Next code should work in any case.
fsrc=/tmp/myfile.unk
fdst=/tmp/dir1/dir2/dir3/myfile.txt
mkdir -p $(dirname ${fdst}) && cp -p ${fsrc} ${fdst}
or bash specific
fsrc=/tmp/myfile.unk
fdst=/tmp/dir1/dir2/dir3/myfile.txt
mkdir -p ${fdst%/*} && cp -p ${fsrc} ${fdst}
As suggested above by help_asap and spongeman you can use the 'install' command to copy files to existing directories or create create new destination directories if they don't already exist.
Option 1
install -D filename some/deep/directory/filename
copies file to a new or existing directory and gives filename default 755 permissions
Option 2
install -D filename -m640 some/deep/directory/filename
as per Option 1 but gives filename 640 permissions.
Option 3
install -D filename -m640 -t some/deep/directory/
as per Option 2 but targets filename into target directory so filename does not need to be written in both source and target.
Option 4
install -D filena* -m640 -t some/deep/directory/
as per Option 3 but uses a wildcard for multiple files.
It works nicely in Ubuntu and combines two steps (directory creation then file copy) into one single step.
Simply without creating script and with simple command ...
mkdir -p /destination-folder/ && cp file-name /destination-folder/
I wrote a support script for cp, called CP (note capital letters) that's intended to do exactly this. Script will check for errors in the path you've put in (except the last one which is the destination) and if all is well, it will do an mkdir -p step to create the destination path before starting the copy. At this point the regular cp utility takes over and any switches you use with CP (like -r, -p, -rpL gets piped directly to cp). Before you use my script, there are a few things you need to understand.
all the info here can be accessed by doing CP --help. CP --help-all include's cp's switches.
regular cp won't do the copy if it doesn't find the destination path. You don't have such a safety net for typos with CP. You're destination will be created, so if you misspell your destination as /usrr/share/icons or /usr/share/icon well that's what's going to be created.
regular cp tends to model it's behavior on the existing path: cp /a/b /c/d will vary on whether d exists or not. if d is an existing folder, cp will copy b into it, making /c/d/b. If d doesn't exist, b will be copied into c and renamed to d. If d exists but is a file and b is a file, it will be overwritten by b's copy. If c doesn't exist, cp doesn't do the copy and exits.
CP doesn't have the luxury of taking cues from existing paths, so it has to have some very firm behavior patterns. CP assumes that the item you're copying is being dropped in the destination path and is not the destination itself (aka, a renamed copy of the source file/folder). Meaning:
"CP /a/b /c/d" will result in /c/d/b if d is a folder
"CP /a/b /c/b" will result in /c/b/b if b in /c/b is a folder.
If both b and d are files: CP /a/b /c/d will result in /c/d (where d is a copy of b). Same for CP /a/b /c/b in the same circumstance.
This default CP behavior can be changed with the "--rename" switch. In this case, it's assumed that
"CP --rename /a/b /c/d" is copying b into /c and renaming the copy to d.
A few closing notes: Like with cp, CP can copy multiple items at a time with the last path being listed assumed to be the destination. It can also handle paths with spaces as long as you use quotation marks.
CP will check the paths you put in and make sure they exist before doing the copy. In strict mode (available through --strict switch), all files/folders being copied must exist or no copy takes place. In relaxed mode (--relaxed), copy will continue if at least one of the items you listed exists. Relaxed mode is the default, you can change the mode temporarily via the switches or permanently by setting the variable easy_going at the beginning of the script.
Here's how to install it:
In a non-root terminal, do:
sudo echo > /usr/bin/CP; sudo chmod +x /usr/bin/CP; sudo touch /usr/bin/CP
gedit admin:///usr/bin/CP
In gedit, paste CP utility and save:
#!/bin/bash
#Regular cp works with the assumption that the destination path exists and if it doesn't, it will verify that it's parent directory does.
#eg: cp /a/b /c/d will give /c/d/b if folder path /c/d already exists but will give /c/d (where d is renamed copy of b) if /c/d doesn't exists but /c does.
#CP works differently, provided that d in /c/d isn't an existing file, it assumes that you're copying item into a folder path called /c/d and will create it if it doesn't exist. so CP /a/b /c/d will always give /c/d/b unless d is an existing file. If you put the --rename switch, it will assume that you're copying into /c and renaming the singl item you're copying from b to d at the destination. Again, if /c doesn't exist, it will be created. So CP --rename /a/b /c/d will give a /c/d and if there already a folder called /c/d, contents of b will be merged into d.
#cp+ $source $destination
#mkdir -p /foo/bar && cp myfile "$_"
err=0 # error count
i=0 #item counter, doesn't include destination (starts at 1, ex. item1, item2 etc)
m=0 #cp switch counter (starts at 1, switch 1, switch2, etc)
n=1 # argument counter (aka the arguments inputed into script, those include both switches and items, aka: $1 $2 $3 $4 $5)
count_s=0
count_i=0
easy_going=true #determines how you deal with bad pathes in your copy, true will allow copy to continue provided one of the items being copied exists, false will exit script for one bad path. this setting can also be changed via the custom switches: --strict and --not-strict
verbal="-v"
help="===============================================================================\
\n CREATIVE COPY SCRIPT (CP) -- written by thebunnyrules\
\n===============================================================================\n
\n This script (CP, note capital letters) is intended to supplement \
\n your system's regular cp command (note uncapped letters). \n
\n Script's function is to check if the destination path exists \
\n before starting the copy. If it doesn't it will be created.\n
\n To make this happen, CP assumes that the item you're copying is \
\n being dropped in the destination path and is not the destination\
\n itself (aka, a renamed copy of the source file/folder). Meaning:\n
\n * \"CP /a/b /c/d\" will result in /c/d/b \
\n * even if you write \"CP /a/b /c/b\", CP will create the path /a/b, \
\n resulting in /c/b/b. \n
\n Of course, if /c/b or /c/d are existing files and /a/b is also a\
\n file, the existing destination file will simply be overwritten. \
\n This behavior can be changed with the \"--rename\" switch. In this\
\n case, it's assumed that \"CP --rename /a/b /c/d\" is copying b into /c \
\n and renaming the copy to d.\n
\n===============================================================================\
\n CP specific help: Switches and their Usages \
\n===============================================================================\n
\
\n --rename\tSee above. Ignored if copying more than one item. \n
\n --quiet\tCP is verbose by default. This quiets it.\n
\n --strict\tIf one+ of your files was not found, CP exits if\
\n\t\tyou use --rename switch with multiple items, CP \
\n\t\texits.\n
\n --relaxed\tIgnores bad paths unless they're all bad but warns\
\n\t\tyou about them. Ignores in-appropriate rename switch\
\n\t\twithout exiting. This is default behavior. You can \
\n\t\tmake strict the default behavior by editing the \
\n\t\tCP script and setting: \n
\n\t\teasy_going=false.\n
\n --help-all\tShows help specific to cp (in addition to CP)."
cp_hlp="\n\nRegular cp command's switches will still work when using CP.\
\nHere is the help out of the original cp command... \
\n\n===============================================================================\
\n cp specific help: \
\n===============================================================================\n"
outro1="\n******************************************************************************\
\n******************************************************************************\
\n******************************************************************************\
\n USE THIS SCRIPT WITH CARE, TYPOS WILL GIVE YOU PROBLEMS...\
\n******************************************************************************\
\n******************************* HIT q TO EXIT ********************************\
\n******************************************************************************"
#count and classify arguments that were inputed into script, output help message if needed
while true; do
eval input="\$$n"
in_=${input::1}
if [ -z "$input" -a $n = 1 ]; then input="--help"; fi
if [ "$input" = "-h" -o "$input" = "--help" -o "$input" = "-?" -o "$input" = "--help-all" ]; then
if [ "$input" = "--help-all" ]; then
echo -e "$help"$cp_hlp > /tmp/cp.hlp
cp --help >> /tmp/cp.hlp
echo -e "$outro1" >> /tmp/cp.hlp
cat /tmp/cp.hlp|less
cat /tmp/cp.hlp
rm /tmp/cp.hlp
else
echo -e "$help" "$outro1"|less
echo -e "$help" "$outro1"
fi
exit
fi
if [ -z "$input" ]; then
count_i=$(expr $count_i - 1 ) # remember, last item is destination and it's not included in cound
break
elif [ "$in_" = "-" ]; then
count_s=$(expr $count_s + 1 )
else
count_i=$(expr $count_i + 1 )
fi
n=$(expr $n + 1)
done
#error condition: no items to copy or no destination
if [ $count_i -lt 0 ]; then
echo "Error: You haven't listed any items for copying. Exiting." # you didn't put any items for copying
elif [ $count_i -lt 1 ]; then
echo "Error: Copying usually involves a destination. Exiting." # you put one item and no destination
fi
#reset the counter and grab content of arguments, aka: switches and item paths
n=1
while true; do
eval input="\$$n" #input=$1,$2,$3,etc...
in_=${input::1} #first letter of $input
if [ "$in_" = "-" ]; then
if [ "$input" = "--rename" ]; then
rename=true #my custom switches
elif [ "$input" = "--strict" ]; then
easy_going=false #exit script if even one of the non-destinations item is not found
elif [ "$input" = "--relaxed" ]; then
easy_going=true #continue script if at least one of the non-destination items is found
elif [ "$input" = "--quiet" ]; then
verbal=""
else
#m=$(expr $m + 1);eval switch$m="$input" #input is a switch, if it's not one of the above, assume it belongs to cp.
switch_list="$switch_list \"$input\""
fi
elif ! [ -z "$input" ]; then #if it's not a switch and input is not empty, it's a path
i=$(expr $i + 1)
if [ ! -f "$input" -a ! -d "$input" -a "$i" -le "$count_i" ]; then
err=$(expr $err + 1 ); error_list="$error_list\npath does not exit: \"b\""
else
if [ "$i" -le "$count_i" ]; then
eval item$i="$input"
item_list="$item_list \"$input\""
else
destination="$input" #destination is last items entered
fi
fi
else
i=0
m=0
n=1
break
fi
n=$(expr $n + 1)
done
#error condition: some or all item(s) being copied don't exist. easy_going: continue if at least one item exists, warn about rest, not easy_going: exit.
#echo "err=$err count_i=$count_i"
if [ "$easy_going" != true -a $err -gt 0 -a $err != $count_i ]; then
echo "Some of the paths you entered are incorrect. Script is running in strict mode and will therefore exit."
echo -e "Bad Paths: $err $error_list"
exit
fi
if [ $err = $count_i ]; then
echo "ALL THE PATHS you have entered are incorrect! Exiting."
echo -e "Bad Paths: $err $error_list"
fi
#one item to one destination:
#------------------------------
#assumes that destination is folder, it does't exist, it will create it. (so copying /a/b/c/d/firefox to /e/f/firefox will result in /e/f/firefox/firefox
#if -rename switch is given, will assume that the top element of destination path is the new name for the the item being given.
#multi-item to single destination:
#------------------------------
#assumes destination is a folder, gives error if it exists and it's a file. -rename switch will be ignored.
#ERROR CONDITIONS:
# - multiple items being sent to a destination and it's a file.
# - if -rename switch was given and multiple items are being copied, rename switch will be ignored (easy_going). if not easy_going, exit.
# - rename option but source is folder, destination is file, exit.
# - rename option but source is file and destination is folder. easy_going: option ignored.
if [ -f "$destination" ]; then
if [ $count_i -gt 1 ]; then
echo "Error: You've selected a single file as a destination and are copying multiple items to it. Exiting."; exit
elif [ -d "$item1" ]; then
echo "Error: Your destination is a file but your source is a folder. Exiting."; exit
fi
fi
if [ "$rename" = true ]; then
if [ $count_i -gt 1 ]; then
if [ $easy_going = true ]; then
echo "Warning: you choose the rename option but are copying multiple items. Ignoring Rename option. Continuing."
else
echo "Error: you choose the rename option but are copying multiple items. Script running in strict mode. Exiting."; exit
fi
elif [ -d "$destination" -a -f "$item1" ]; then
echo -n "Warning: you choose the rename option but source is a file and destination is a folder with the same name. "
if [ $easy_going = true ]; then
echo "Ignoring Rename option. Continuing."
else
echo "Script running in strict mode. Exiting."; exit
fi
else
dest_jr=$(dirname "$destination")
if [ -d "$destination" ]; then item_list="$item1/*";fi
mkdir -p "$dest_jr"
fi
else
mkdir -p "$destination"
fi
eval cp $switch_list $verbal $item_list "$destination"
cp_err="$?"
if [ "$cp_err" != 0 ]; then
echo -e "Something went wrong with the copy operation. \nExit Status: $cp_err"
else
echo "Copy operation exited with no errors."
fi
exit
cp has multiple usages:
$ cp --help
Usage: cp [OPTION]... [-T] SOURCE DEST
or: cp [OPTION]... SOURCE... DIRECTORY
or: cp [OPTION]... -t DIRECTORY SOURCE...
Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.
#AndyRoss's answer works for the
cp SOURCE DEST
style of cp, but does the wrong thing if you use the
cp SOURCE... DIRECTORY/
style of cp.
I think that "DEST" is ambiguous without a trailing slash in this usage (i.e. where the target directory doesn't yet exist), which is perhaps why cp has never added an option for this.
So here's my version of this function which enforces a trailing slash on the dest dir:
cp-p() {
last=${#: -1}
if [[ $# -ge 2 && "$last" == */ ]] ; then
# cp SOURCE... DEST/
mkdir -p "$last" && cp "$#"
else
echo "cp-p: (copy, creating parent dirs)"
echo "cp-p: Usage: cp-p SOURCE... DEST/"
fi
}
i strongly suggest ditto.
just works.
ditto my/location/poop.txt this/doesnt/exist/yet/poop.txt
Just had the same issue. My approach was to just tar the files into an archive like so:
tar cf your_archive.tar file1 /path/to/file2 path/to/even/deeper/file3
tar automatically stores the files in the appropriate structure within the archive. If you run
tar xf your_archive.tar
the files are extracted into the desired directory structure.
Copy from source to an non existing path
mkdir –p /destination && cp –r /source/ $_
NOTE: this command copies all the files
cp –r for copying all folders and its content
$_ work as destination which is created in last command
Oneliner to create a small script that can be used as subcommand, in find for instance:
set +H; echo -e "#!/bin/sh\nmkdir -p \$(dirname \"\$2\"); cp \"\$1\" \"$2\"\;" > ~/local/bin/cpmkdir; chmod +x ~/local/bin/cpmkdir
You can then use it like:
find -name files_you_re_lookin_for.* -exec cpmkdir {} ../extracted_copy/{} \;
rsync file /path/to/copy/file/to/is/very/deep/there
This might work, if you have the right kind of rsync.
You can use find with Perl. Command will be like this:
find file | perl -lne '$t = "/path/to/copy/file/to/is/very/deep/there/"; /^(.+)\/.+$/; `mkdir -p $t$1` unless(-d "$t$1"); `cp $_ $t$_` unless(-f "$t$_");'
This command will create directory $t if it doesn't exist. And than copy file into $t only unless file exists inside $t.
This works on GNU /bin/bash version 3.2 on MacOS (tested on both Catalina and Big Sur)
cp -Rv <existing-source-folder>/ <non-existing-2becreated-destination-folder>
the "v" option is for verbose.
And I think of the "-R" option as "Recursive".
man's full description of -R is:
If source_file designates a directory, cp copies the directory and the entire subtree connected at that point. If the source_file ends in a /, the contents of the directory are copied rather than the directory itself. This option also causes symbolic links to be copied, rather than indirected through, and for cp to create special files rather than copying them as normal files. Created directories have the same mode as the corresponding source directory, unmodified by the process' umask.
In -R mode, cp will continue copying even if errors are detected.
Note that cp copies hard-linked files as separate files. If you need to preserve hard links, consider using tar(1), cpio(1), or pax(1) instead.
In the example below, I'm using a "/" at the end of existingfolder so that it copies all the contents of existingfolder (and not the folder itself) into newfolder:
cp -Rv existingfolder/ newfolder
Try it.
Only for macOS
rsync -R <source file path> destination_folder
For macOS --parents option of cp doesn't work
Many of the other solutions don't work on files or folders which need escaping. Here is a solution which works for files and folders, and escapes spaces and other special characters. Tested in a busybox ash shell which doesn't have access to some of the fancier options.
export file="annoying folder/bar.txt"
export new_parent="/tmp/"
# Creates /tmp/annoying folder/
mkdir -p "$(dirname "$new_folder/$file")"
# Copies file to /tmp/annoying folder/bar.txt
cp -r "$file" "$new_folder/$file"
This should also work if you omit bar.txt if you need the recursive copy of a whole folder.
Let's say you are doing something like
cp file1.txt A/B/C/D/file.txt
where A/B/C/D are directories which do not exist yet
A possible solution is as follows
DIR=$(dirname A/B/C/D/file.txt)
# DIR= "A/B/C/D"
mkdir -p $DIR
cp file1.txt A/B/C/D/file.txt
hope that helps!
Simple
cp -a * /path/to/dst/
should do the trick.