I have node.js 0.8.14 installed on Ubuntu 12.10. I created a directory in my home directory with a sub directory node_modules. I want to install some local node modules there but running
npm install myModule
in this directory installs this module in /usr/local/lib/node_modules/ (same behavior as installing the module with the -g flag
There is no node path in .bashrc.
Any idea how I can install local node modules?
After some further research I found the solution.
Running the command npm config ls revealed that the default config global=false (you see the default config with npm config ls -l) was overwritten by global=true in /home/vsdev/.npmrc and /usr/local/etc/npmrc.
Reverting this to global=false solved the issue.
That is odd.
FYI you don't need to create the node_modules directory, npm will do that for you
npm normally just installs to the current directory. Even if the package you are installing is configured to prefer global installation, npm will install it locally unless you explicitly pass the -g parameter.
can you run the following shell commands and confirm npm is really the real npm?
which npm
alias | grep npm
npm install load all in node_modules then it might be version 3 behaviour http://blog.npmjs.org/post/110924823920/npm-weekly-5 or as mentioned by #vsdev so once you make sure it version 3 behaviour and u want to go with it then its fine else follow below
1- uninstall all modules.. into the node_modules folder in your project then execute: npm uninstall *
2- Tell npm to install with legacy bundling for this one install:
npm install --legacy-bundling
A "permanent" alternative:
Set your npm config to always use legacy bundling...
npm set legacy-bundling=true
.. and run as usual:
npm install
*fetching dependencies with legacy bundling will take a lot more time because many several different versions of the same dependencies will be installed.
Related
I'm trying to install Hexo globally using npm. When I run
npm install -g hexo-cli
I'm informed that it was installed to /Users/myusername/.node/bin/hexo -> /Users/myusername/.node/lib/node_modules/hexo-cli/bin/hexo
The problem comes in when I run hexo init blog and the hexo command is not found.
I installed Node and npm with Homebrew, so when I run which node and which npm, the results are /usr/local/bin/node and /usr/local/bin/npm respectively.
I'm thinking that I still have leftover files and directories from when I installed Node without homebrew, but I don't want to start deleting things without fully knowing the repercussions. Would I be safe to delete all files located in the /Users/myusername/.node/ directory? I can't figure out why npm is not installing to the proper directory.
After a little digging, I found that my npm prefix variable was pointing do the wrong directory, left behind by the old Node installation. I ran npm config get prefix to see where it was pointing.
I set the new prefix value using npm config set prefix /usr/local. Homebrew is symlinked with this directory via /usr/local/bin. I uninstalled hexo-cli and reinstalled through npm, and now it works perfectly.
For NVM users
Run nvm use --delete-prefix v10.13.0 --silent replacing v10.13.0 with whatever version of node you're using.
A simple way to cope with environment variables/path problems on Windows:
Run command:
npm install -g hexo
Using node.js command prompt rather than cmd windows provided by Windows itself.
Using npm to install packages, I can never use their cli. For instance, install grunt-cli, avn, nvm, etc. and running
npm install -g avn avn-nvm avn-n
avn setup
Results in command "avn" not found. I don't know if this is a pathing issue, but my PATH is:
/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/opt/X11/bin:/usr/local/git/bin:/usr/texbin:/usr/local/sbin:/usr/local/opt/ruby/bin:/usr/local/lib/python2.7/site-packages:/usr/local/share/npm/bin
I am using OSX.
Your path does not include where the node_modules you're installing globally exist. You need to include the bin path for the modules:
export PATH=$PATH:/usr/lib/node_modules/.bin
I've installed NVM for node.js using the instructions from this post:
http://www.backdrifter.com/2011/02/18/using-nvm-and-npm-to-manage-node-js/
When I switch between node versions and then use npm to install a module, all the modules are placed in the same 'node_modules' folder (~/node_modules/) instead of in the 'node_modules' directory specific to that version of node?
Any idea on how to remedy this?
Based on the comments from https://github.com/creationix/nvm/pull/97:
When installing packages with npm using the global switch -g the
package ends up in the proper directory (i.e.
.nvm/$VERSION/lib/node_modules), however node is unable to require it
since it somehow isn't searching on it's prefix.
So using npm install -g xxxxx will put the modules in the correct location for NVM but if you try to require one of them node can't find the module. I am still playing around with this and will update if I find a solution.
Update
Where does NPM put node_modules? (see https://docs.npmjs.com/files/folders)
Local install (default): puts stuff in ./node_modules of the current package root.
Global install (with -g): puts stuff in /usr/local or wherever node is installed.
Install it locally if you're going to require() it.
Install it globally if you're going to run it on the command line.
If you need both, then install it in both places, or use npm link.
So what I did was run npm init (see http://npmjs.org/doc/init.html) in my projects root dir which generated package.json. Now when I run npm install xxxxx it creates a node_modules dir in my project folder (which I add to my .gitignore). This works for modules that I require in my code.
For commands such as CoffeeScript I install with npm install -g coffee-script which puts it in the correct directory (.nvm/$VERSION/lib/node_modules). While I can't require these modules (npm link should solve this problem) I can run the commands - i.e. coffee.
I just installed express globally (-g) and was having problem when require("express"). Just like Jesse Vogt said I just reinstalled express but this time without the -g just like this: "sudo npm install express" and now is working perfectly!
For latest nvm window version 1.1.7.
Package was installed and placed into the respective nodejs version.
nvm use 16.8.0
npm install truffle
nvm use 16.7.0
npm install mysql
In the past when I installed packages using npm(>=1.0) they would be installed locally, but not anymore.
My setup:
First I use nvm to install node.js.
My operating System:
alfred#alfred-laptop:~/node/so/6513101$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu<br>
DISTRIB_RELEASE=10.10
DISTRIB_CODENAME=maverick
DISTRIB_DESCRIPTION="Ubuntu 10.10"
My node version:
alfred#alfred-laptop:~/node/so/6513101$ node -v
v0.4.8
My npm version:
alfred#alfred-laptop:~/node/so/6513101$ npm -v
1.0.15
Installing random package
alfred#alfred-laptop:~/node/so/6513101$ npm install notifo
notifo#0.0.2 ../../../node_modules/notifo
In the past it would install into the same directory but it does not install in the same directory anymore. is my npm/node.js broken or am I missing something or does npm not anymore install local packages(inside same folder => ~/node/so/6513101/node_modules) which I thought was a cool feature because I could bundle all my dependencies so that other users did not have to install npm to use my code(I still believe users should install npm because it is a great product). The bundle command is gone so I can't use that? Could someone please explain to me what is going on?
npm walks up the folder tree until it finds a node_modules or a package.json and uses that as the root. What does npm root print out?
If you mkdir node_modules or create a package.json file, then it'll use the cwd.
EDIT: I won't see updates you post here. For better results, just post everything in the github issue, and let's do the support over there.
Is there any way to set an NPM dependency to be installed globally in the package.json file?
Whenever I run npm update all the dependencies are installed locally.
Thanks.
I believe that the -g option causes things to be installed globally.
Is your reason for installing globally in order to make new scripts available on the command line? If so, I might have a workaround for you.
Just install your packages as usual (without the -g):
npm install -S my_module_name
Including the -S flag or --save will help keep your package.json file up to date.
As usual, your project's npm install step will install locally (as you have described). However, it will also produces a local folder containing symlinks to each of the project's npm-supplied command-line executables (located inside the node_modules/.bin/ folder).
Add that folder to your system path to enable command-line access to npm modules without requiring installation via -g, or root access to a machine:
export PATH=/path/to/your/project/source/node_modules/.bin/:$PATH