I have a field for embedding videos. In the description I would like to show a sample of what that code should look like. However natively EE will render the HTML. Is there a way to show exactly what the code should look like without it being rendered? Other fields have HTML that needs to render so if there is a global on/off it must be on.
Have a look at NSM Publish Hints
If we are talking about a specific CF in a channel, the way I go about it is as follow:
For external services (youtube/viemo): have a custom field (text) where people just have to paste in the ID of the video, and another field (P&T pill or dropwown) where editors choose the service (vimeo, youtube). The various embed codes are handled on the template side within an if/else or case logic
For HTML5 self hosted videos: have several file fields letting people choose videos in the various needed formats. These videos are uploaded through FTP and synced using the file manager.
Copy and paste your code into this Encoder and paste the output into the description field:
http://www.opinionatedgeek.com/DotNet/Tools/HTMLEncode/encode.aspx
Related
I’m new to Modx so I don’t know if this is possible or not.
My TV, in this case [[*myTV]] outputs the following:
<data value='www.mylink.com'>Description</data>
Is there a way to only display the data value in the front-end? In this case I just want to display the url.
My recommendation would be to keep the data (in this case the URL) and the html separate, and that might help your situation. If the TV only includes the URL itself, then it makes it much easier to deal with the output of the TV using output modifiers. As an example, if [[*myTV]] contains www.mylink.com for a particular resource and you want the original output in your question, you could do something like:
[[*myTV:default=`<data value='[[*myTV]]'>Description</data>`]]
You can also nest TVs within output modifiers, so if for example you had a corresponding [[*description]] TV that describes the URL in [[*myTV]], you could use:
[[*myTV:default=`<data value='[[*myTV]]'>[[*description]]</data>`]]
TL;DR... The short version: Storing the entire output in the TV and extracting text from within that TV to output is much more difficult than storing individual components of that output in separate TVs and bringing them together for output when needed.
The longer version: In any situation where you're storing both data and HTML in a TV (which is not advisable in the vast majority of cases), you'll likely find duplication of your data across your project, and if by chance you decide to change the html at some point in the future, you then have to go into each and every TV field and change that HTML, which is the opposite effect from what a CMS is supposed to do - i.e. make Content Management easier!
If you do happen to find a use case for storing TVs along with their HTML formatting, that is a job best left for MODX Chunks, where you can code the implementation of your TVs within HTML in one spot within MODX and instead of duplicating that code everywhere, you reference the chunk like so: [[$chunk]].
i was trying to understand in the Kentico's database model how can i change the web parts content using a database script.
So, basically i have a website based on Kentico with several articles, and internal hyperlinks in its content. But the problem is that the format of those hyperlinks are actually invalid. And i was looking for a way to build a script and do a bulk-update in order to replace some characters and update those hyperlinks to the valid format.
Any idea how can i build the query to get the content of all web parts used in all published pages.
Thank you
It depends on your web parts and how the content is rendered. There are different ways that web parts render their content:
The web part layout is used for markup
The ASCX file for the web part is used for markup
The web part makes use of a repeater that uses a Transformation to render the markup- The markup is generated in code behind
The last one can be tricky to change depending on the web part and whether you have access to all the code behind, but the others you can change either in code in your solution or within the Administration area itself.
Doing this in SQL would probably require a combination of T-SQL XML support and regular expressions to find what you're looking for. you effectively need to look in the CMS_WebPart and CMS_WebPartLayout tables to find what you're looking for.
However, reading your query, I'm not 100% sure you're talking about web parts, (my apologies if you are) as you talk about links in the article content itself. If these are set using the Editable text web part, then you need to look in the CMS_Document table at the DocumentContent field to find the links to replace. But you then need to look at how to correctly format those links going forward so that you do not need to repeat this process later.
Note:
You need to be really careful when doing this in SQL to make sure that you don't create invalid XML. Things go bad when you do that.
This won't flush your cache, so you'll need to clear your cache manually afterwards.
If you're using out-of-the-box web parts, you should really make a copy of them and use the copy if you're going to modify, this way, you're less likely to have pain in future upgrades.
Typically "content" is not set in a webpart. Webparts are configured to retrieve content from page types. There is an exception to this with specific webparts like Editable Text, Static Text, Static HTML, etc.
The configuration of a webpart is stored at the template level in the cms_pagetemplate table. The configuration for ALL webparts on that page template are stored in the PageTemplateWebParts field. So you'd have to parse through the XML and get the proper webpart and then perform an update on that field. You maybe able to do a regex to find that content and replace it as well.
Not ideal to do this via SQL simply because of version history and it can cause a lot of problems later on. I'd suggest finding out which API calls you can make to perform these updates and write a small program for it.
We have a requirement for creating a banner for which we plan to use Web Content Display.
As part of the implementation I have created a structure with the required fields like link-type (drop-down), etc and using corresponding template.
I wish to make a conditional check based on the type of selection in the link-type and show link-to-page or text-box.
I observed that there is no option to have a conditional check in the article editor rendering.
Thus I wish to check whether there is any hack or trick that we can do to achieve the above conditional thing?
Also, can we inject custom Javascript to achieve this as part of the structure?
I finally have to stick to the default options in the liferay structure. I plan to use separator provided by LR to categories the elements to avoid end user (admin) confusion.
P.S. I was not able to locate any cool doc that would help in implementing the suggestion made by #Tobias (sorry, but I guess the wiki link above assumes you to be an expert of LR, and even the sample links in there does not work).
I would like to "customize" my sharepoint wiki by doing something very simple.
I would like to be able to run a regex on wiki pages looking for [math] and [\math] tags, then take the expression written in the middle (assume this value is stored in a variable x) and replace the whole block by
"<img src='http://latex.codecogs.com/gif.latex?" + x +"'/>"
So for example, the shortcode [math]a^2+b^2=c^2[\math] should end up being displayed as an image as follows (thanks to this online tool):
I have never developed anything in sharepoint, and I've been using it for a week.
Can anybody tell me how I should proceed to add such a feature (if it's possible)?
You can use existing solution like ShortPoint.
Sure - this is simmply done via two methods - 1) You could modify the page directly using SharePoint designer - fly in the code where you want it, 2) The better way - add your code to text file, upload the text file to a document library then use the Content Editor web part, drop it on the page, point it (through the properties) to the text file.
Note: The Content Editor part will allow you to modify the background HTML/Script, however, it has a nasty habit of overriding your code and I've had it actually duplicate itself (adding repeat scripts). Using the Text file eliminiates that issue.
If i understand you correctly, I don't think that the content editor web part is the solution you are looking for. I believe you are wanting to implement a shortcodes solution such as that found in WordPress, correct? In that case, the issue becomes a bit more complex. To really get any kind of custom code that would execute at the necessary stages, you would need a custom solution either implementing additional functionality in the existing rich text editor, or roll your own custom rich text editor.
At that point, you would have complete control over how the content is parsed and interpreted, so you could have both server-side and client side processing. You could make use of templating engines like mustache or handlebars.
To do this, you would need to write your own Custom field type, inherit from SPFieldMultiLineText, override the property FieldRenderingControl, and return your custom control. That way you have the option of implementing it in several different places (custom pege fields in a page layout, custom webparts, custom lists, etc.) and you still get the benefits you want from the out-of-the-box control.
I want to add text to body element but I don't know how. Which method will work on the body tag?
Sorry for my english and thanks for replies.
In Watir, you can manipulate a web page (DOM) using JS, just like that:
browser.execute_script("document.getElementById('pageContent').appendChild(document.createTextNode('Great Success!'));")
I assume that the point of the question is:
All users are not just interacting by just clicking buttons and links on the web app, some of them are doing nasty things like altering http requests to make your system do something that it is not supposed to do... or to just have some fun.
To mimic this behavior, you could write a ui-test that alters forms on the web page, so that for example, one could type in anything into any field instead of a limited dropdown.
To do that, ui test has to:
manipulate DOM to set form inputs free of limitations (replace select's with input's, etc.)
ui test has to know, which values to use, in many cases it's pointless to enter random values. Your webapp has to provide some good "unwanted" options.
Why would you want to modify the webpage in Watir? It's for automated testing, not DOM manipulation.
If you want to add something to the DOM element in javascript, you can do it like that:
var txt = document.createTextNode(" This text was added to the DIV.");
document.getElementById('myDiv').appendChild(txt);
Or use some DOM manipulation library, like jQuery.
If you have not worked your way though the watir tutorial, I would suggest you do so. It deals with things like filling in text fields etc.
Learn to use the developer tools for your browser, Firebug for Firefox, or the built in tools for IE and CHrome. They will let you look at things as you interact with the site.
If the element is not a normal HTML input field of some sort, then you are dealing with a custom control. Many exist and they are varied and there is no one set solution for dealing with them. Without knowing which control you are using, and being able ourselves to interact with a sample of it, or at least see the HTML, it is very very difficult to advise you, we basically have to just guess (which is often a waste of everyone's time)
Odds are if you have a place you can enter text, then it is some form of input control, it might not start out that way, you may need to click on some other element, to make the input area appear, but without a sample of HTML all we can do is guess.
If this is a commercial control, see if you can find a demo site that shows the control in action. Try googling things like class names for the elements and often you get lucky