How Do I Create a complete String from ArrayList - string

I want to create a String from an ArrayList. Currently, I am only able to return the last value from the ArrayList. My code:
eachstep = new ArrayList<String>();
for (int i = 0; i < parsedsteps.size(); i++) {
eachstep.add(parsedsteps.get(i).replaceAll("<[^>]*>", ""));
}
for (int i = 0; i < eachstep.size(); i++) {
String directions = i + "."+" "+eachstep.get(i)+"\n"+;
}
Gives me:
3. This is step 3.
Instead of:
1. This is step 1.
2. This is step 2.
3. This is step 3.
How do I make my for loop create a String with all the values from the ArrayList?

You'll need to declare your string outside of the loop, and I suggest using StringBuilder as well, it's more efficient for building strings like this.
StringBuilder directions = new StringBuilder();
for( int i = 0; i < eachstep.size(); i++ )
{
directions.append( i + "." + " " + eachstep.get( i ) + "\n" );
}
Then when you want to get the string out of the StringBuilder, just call directions.toString().

try this
eachstep = new ArrayList<String>();
for (int i = 0; i < parsedsteps.size(); i++) {
eachstep.add(parsedsteps.get(i).replaceAll("<[^>]*>", ""));
}
String directions="";
for (int i = 0; i < eachstep.size(); i++) {
directions += i + "."+" "+eachstep.get(i)+"\n"+;
}
If you have large size of string array, you might want to consider using StringBuilder, e.g
StringBuilder builder = new StringBuilder();
for(String str: eachstep ){
builder.append(i).append(".").append(str).append("\n");
}
String direction = builder.toString();

String directions = "";
for (int i = 0; i < eachstep.size(); i++) {
directions += i + "."+" "+eachstep.get(i)+"\n";
}

Related

Is there a way to assign/edit String[i][j] value on runtime in dart?

CODE
void main() {
List<String> str = ["hello", "world"];
for (int i = 0; i < str.length; i++) {
for (int j = 0; j < str[i].length; j++) {
if (str[i][j] == 'o') {
str[i][j]='e';
print('$i,$j');
}
}
}
print(str);
}
The Error I get
The operator '[]=' isn't defined for the class 'String'.
Try correcting the operator to an existing operator, or defining a '[]=' operator.
str[i][j]='e';
If i comment this line //str[i][j]='e'; i get the location of the characters but i am unable to edit the string like we usually do in C++
String in Dart does not have a []= operator which means you cannot set a value on the String using the [] operator like you are trying to do.
This makes sense since String is immutable in Dart and calling the []= does not allow us to return anything, so we would not be able to get the modified String back.
We can instead call .replaceRange() on the String which allow us to replace a part of a String with some other String value. The method will return a new String with the change (since we are not allowed to change any existing String object).
With this, we can rewrite your example to:
void main() {
List<String> str = ["hello", "world"];
for (int i = 0; i < str.length; i++) {
for (int j = 0; j < str[i].length; j++) {
if (str[i][j] == 'o') {
str[i] = str[i].replaceRange(j, j + 1, 'e');
print('$i,$j');
}
}
}
print(str);
}
Which will output:
0,4
1,1
[helle, werld]
If the purpose is to replace all o with e, a more efficient solution would be to use the replaceAll() method:
void main() {
List<String> str = ["hello", "world"];
for (int i = 0; i < str.length; i++) {
str[i] = str[i].replaceAll('o', 'e');
}
print(str); // [helle, werld]
}
Simple way: Map and replaceAll
List<String> str = ["hello","world"];
str = str.map((s)=>
s.replaceAll("o", "e")
).toList();
print(str);
Result

How to get schedule element data in revit using C#

I am new to Revit API and am working in C#. I want to get the schedule element parameters value using C#. I used the below code to get the view schedule.
var viewSchedule = new FilteredElementCollector(document)
.OfClass(typeof(ViewSchedule))
.FirstOrDefault(e => e.Name == "MyScheduleName") as ViewSchedule;
Schedule Element Data
From the above schedule, I used the below code to get the element data (please refer the above screenshot link) but it taking long time to reflect the output (10 to 15 seconds).
var rowCount = viewSchedule.GetTableData().GetSectionData(SectionType.Body).NumberOfRows;
var colCount = viewSchedule.GetTableData().GetSectionData(SectionType.Body).NumberOfColumns;
for (int i = 0; i < rowCount; i++)
{
for (int j = 0; j < colCount; j++)
{
data += viewSchedule.GetCellText(SectionType.Body, i, j);
}
}
Please let me know is there any alternate approach to get the schedule data using C#.
Thanks in advance.
Maybe you can also use ViewSchedule.Export as demonstrated by The Building Coder discussing The Schedule API and Access to Schedule Data.
Yes, you can easily access Schedule data without exporting.
Firstly, get all the schedules and read the data cell by cell. Secondly, create dictionary and store data in form of key, value pairs. Now you can use the schedule data as you want. I have tried this in Revit 2019.
Here is the implementation.
public void getScheduleData(Document doc)
{
FilteredElementCollector collector = new FilteredElementCollector(doc);
IList<Element> collection = collector.OfClass(typeof(ViewSchedule)).ToElements();
String prompt = "ScheduleData :";
prompt += Environment.NewLine;
foreach (Element e in collection)
{
ViewSchedule viewSchedule = e as ViewSchedule;
TableData table = viewSchedule.GetTableData();
TableSectionData section = table.GetSectionData(SectionType.Body);
int nRows = section.NumberOfRows;
int nColumns = section.NumberOfColumns;
if (nRows > 1)
{
//valueData.Add(viewSchedule.Name);
List<List<string>> scheduleData = new List<List<string>>();
for (int i = 0; i < nRows; i++)
{
List<string> rowData = new List<string>();
for (int j = 0; j < nColumns; j++)
{
rowData.Add(viewSchedule.GetCellText(SectionType.Body, i, j));
}
scheduleData.Add(rowData);
}
List<string> columnData = scheduleData[0];
scheduleData.RemoveAt(0);
DataMapping(columnData, scheduleData);
}
}
}
public static void DataMapping(List<string> keyData, List<List<string>>valueData)
{
List<Dictionary<string, string>> items= new List<Dictionary<string, string>>();
string prompt = "Key/Value";
prompt += Environment.NewLine;
foreach (List<string> list in valueData)
{
for (int key=0, value =0 ; key< keyData.Count && value< list.Count; key++,value++)
{
Dictionary<string, string> newItem = new Dictionary<string, string>();
string k = keyData[key];
string v = list[value];
newItem.Add(k, v);
items.Add(newItem);
}
}
foreach (Dictionary<string, string> item in items)
{
foreach (KeyValuePair<string, string> kvp in item)
{
prompt += "Key: " + kvp.Key + ",Value: " + kvp.Value;
prompt += Environment.NewLine;
}
}
Autodesk.Revit.UI.TaskDialog.Show("Revit", prompt);
}

Encode string "aaa" to "3[a]"

give a string s, encode it by the format: "aaa" to "3[a]". The length of encoded string should the shortest.
example: "abbabb" to "2[a2[b]]"
update: suppose the string only contains lowercase letters
update: here is my code in c++, but it's slow. I know one of the improvement is using KMP to compute if the current string is combined by a repeat string.
// this function is used to check if a string is combined by repeating a substring.
// Also Here can be replaced by doing KMP algorithm for whole string to improvement
bool checkRepeating(string& s, int l, int r, int start, int end){
if((end-start+1)%(r-l+1) != 0)
return false;
int len = r-l+1;
bool res = true;
for(int i=start; i<=end; i++){
if(s[(i-start)%len+l] != s[i]){
res = false;
break;
}
}
return res;
}
// this function is used to get the length of the current number
int getLength(int l1, int l2){
return (int)(log10(l2/l1+1)+1);
}
string shortestEncodeString(string s){
int len = s.length();
vector< vector<int> > res(len, vector<int>(len, 0));
//Initial the matrix
for(int i=0; i<len; i++){
for(int j=0; j<=i; j++){
res[j][i] = i-j+1;
}
}
unordered_map<string, string> record;
for(int i=0; i<len; i++){
for(int j=i; j>=0; j--){
string temp = s.substr(j, i-j+1);
/* if the current substring has showed before, then no need to compute again
* Here is a example for this part: if the string is "abcabc".
* if we see the second "abc", then no need to compute again, just use the
* result from first "abc".
**/
if(record.find(temp) != record.end()){
res[j][i] = record[temp].size();
continue;
}
string ans = temp;
for(int k=j; k<i; k++){
string str1 = s.substr(j, k-j+1);
string str2 = s.substr(k+1, i-k);
if(res[j][i] > res[j][k] + res[k+1][i]){
res[j][i] = res[j][k]+res[k+1][i];
ans = record[str1] + record[str2];
}
if(checkRepeating(s, j, k, k+1, i) == true && res[j][i] > 2+getLength(k-j+1, i-k)+res[j][k]){
res[j][i] = 2+getLength(k-j+1, i-k)+res[j][k];
ans = to_string((i-j+1)/(k-j+1)) + '[' + record[str1] +']';
}
}
record[temp] = ans;
}
}
return record[s];
}
With very little to start with in terms of a question statement, I took a quick stab at this using JavaScript because it's easy to demonstrate. The comments are in the code, but basically there are alternating stages of joining adjacent elements, run-length checking, joining adjacent elements, and on and on until there is only one element left - the final encoded value.
I hope this helps.
function encode(str) {
var tmp = str.split('');
var arr = [];
do {
if (tmp.length === arr.length) {
// Join adjacent elements
arr.length = 0;
for (var i = 0; i < tmp.length; i += 2) {
if (i < tmp.length - 1) {
arr.push(tmp[i] + tmp[i + 1]);
} else {
arr.push(tmp[i]);
}
}
tmp.length = 0;
} else {
// Swap arrays and clear tmp
arr = tmp.slice();
tmp.length = 0;
}
// Build up the run-length strings
for (var i = 0; i < arr.length;) {
var runlength = runLength(arr, i);
if (runlength > 1) {
tmp.push(runlength + '[' + arr[i] + ']');
} else {
tmp.push(arr[i]);
}
i += runlength;
}
console.log(tmp);
} while (tmp.length > 1);
return tmp.join();
}
// Get the longest run length from a given index
function runLength(arr, ind) {
var count = 1;
for (var i = ind; i < arr.length - 1; i++) {
if (arr[i + 1] === arr[ind]) {
count++;
} else {
break;
}
}
return count;
}
<input id='inp' value='abbabb'>
<button type="submit" onClick='javascript:document.getElementById("result").value=encode(document.getElementById("inp").value)'>Encode</button>
<br>
<input id='result' value='2[a2[b]]'>

Find longest substring without repeating characters

Given a string S of length N find longest substring without repeating characters.
Example:
Input: "stackoverflow"
Output: "stackoverfl"
If there are two such candidates, return first from left. I need linear time and constant space algorithm.
You are going to need a start and an end locator(/pointer) for the
string and an array where you store information for each character:
did it occour at least once?
Start at the beginning of the string, both locators point to the
start of the string.
Move the end locator to the right till you find
a repetition (or reach the end of the string). For each processed character, store it in the array.
When stopped store the position if this is the largest substring. Also remember the repeated character.
Now do the same thing with the start locator, when processing
each character, remove its flags from the array. Move the locator till
you find the earlier occurrence of the repeated character.
Go back to step 3 if you haven't reached the end of string.
Overall: O(N)
import java.util.HashSet;
public class SubString {
public static String subString(String input){
HashSet<Character> set = new HashSet<Character>();
String longestOverAll = "";
String longestTillNow = "";
for (int i = 0; i < input.length(); i++) {
char c = input.charAt(i);
if (set.contains(c)) {
longestTillNow = "";
set.clear();
}
longestTillNow += c;
set.add(c);
if (longestTillNow.length() > longestOverAll.length()) {
longestOverAll = longestTillNow;
}
}
return longestOverAll;
}
public static void main(String[] args) {
String input = "substringfindout";
System.out.println(subString(input));
}
}
You keep an array indicating the position at which a certain character occurred last. For convenience all characters occurred at position -1. You iterate on the string keeping a window, if a character is repeated in that window, you chop off the prefix that ends with the first occurrence of this character. Throughout, you maintain the longest length. Here's a python implementation:
def longest_unique_substr(S):
# This should be replaced by an array (size = alphabet size).
last_occurrence = {}
longest_len_so_far = 0
longest_pos_so_far = 0
curr_starting_pos = 0
curr_length = 0
for k, c in enumerate(S):
l = last_occurrence.get(c, -1)
# If no repetition within window, no problems.
if l < curr_starting_pos:
curr_length += 1
else:
# Check if it is the longest so far
if curr_length > longest_len_so_far:
longest_pos_so_far = curr_starting_pos
longest_len_so_far = curr_length
# Cut the prefix that has repetition
curr_length -= l - curr_starting_pos
curr_starting_pos = l + 1
# In any case, update last_occurrence
last_occurrence[c] = k
# Maybe the longest substring is a suffix
if curr_length > longest_len_so_far:
longest_pos_so_far = curr_starting_pos
longest_len_so_far = curr_length
return S[longest_pos_so_far:longest_pos_so_far + longest_len_so_far]
EDITED:
following is an implementation of the concesus. It occured to me after my original publication. so as not to delete original, it is presented following:
public static String longestUniqueString(String S) {
int start = 0, end = 0, length = 0;
boolean bits[] = new boolean[256];
int x = 0, y = 0;
for (; x < S.length() && y < S.length() && length < S.length() - x; x++) {
bits[S.charAt(x)] = true;
for (y++; y < S.length() && !bits[S.charAt(y)]; y++) {
bits[S.charAt(y)] = true;
}
if (length < y - x) {
start = x;
end = y;
length = y - x;
}
while(y<S.length() && x<y && S.charAt(x) != S.charAt(y))
bits[S.charAt(x++)]=false;
}
return S.substring(start, end);
}//
ORIGINAL POST:
Here is my two cents. Test strings included. boolean bits[] = new boolean[256] may be larger to encompass some larger charset.
public static String longestUniqueString(String S) {
int start=0, end=0, length=0;
boolean bits[] = new boolean[256];
int x=0, y=0;
for(;x<S.length() && y<S.length() && length < S.length()-x;x++) {
Arrays.fill(bits, false);
bits[S.charAt(x)]=true;
for(y=x+1;y<S.length() && !bits[S.charAt(y)];y++) {
bits[S.charAt(y)]=true;
}
if(length<y-x) {
start=x;
end=y;
length=y-x;
}
}
return S.substring(start,end);
}//
public static void main(String... args) {
String input[][] = { { "" }, { "a" }, { "ab" }, { "aab" }, { "abb" },
{ "aabc" }, { "abbc" }, { "aabbccdefgbc" },
{ "abcdeafghicabcdefghijklmnop" },
{ "abcdeafghicabcdefghijklmnopqrabcdx" },
{ "zxxaabcdeafghicabcdefghijklmnopqrabcdx" },
{"aaabcdefgaaa"}};
for (String[] a : input) {
System.out.format("%s *** GIVES *** {%s}%n", Arrays.toString(a),
longestUniqueString(a[0]));
}
}
Here is one more solution with only 2 string variables:
public static String getLongestNonRepeatingString(String inputStr){
if(inputStr == null){
return null;
}
String maxStr = "";
String tempStr = "";
for(int i=0; i < inputStr.length(); i++){
// 1. if tempStr contains new character, then change tempStr
if(tempStr.contains("" + inputStr.charAt(i))){
tempStr = tempStr.substring(tempStr.lastIndexOf(inputStr.charAt(i)) + 1);
}
// 2. add new character
tempStr = tempStr + inputStr.charAt(i);
// 3. replace maxStr with tempStr if tempStr is longer
if(maxStr.length() < tempStr.length()){
maxStr = tempStr;
}
}
return maxStr;
}
Algorithm in JavaScript (w/ lots of comments)..
/**
Given a string S find longest substring without repeating characters.
Example:
Input: "stackoverflow"
Output: "stackoverfl"
Input: "stackoverflowabcdefghijklmn"
Output: "owabcdefghijklmn"
*/
function findLongestNonRepeatingSubStr(input) {
var chars = input.split('');
var currChar;
var str = "";
var longestStr = "";
var hash = {};
for (var i = 0; i < chars.length; i++) {
currChar = chars[i];
if (!hash[chars[i]]) { // if hash doesn't have the char,
str += currChar; //add it to str
hash[chars[i]] = {index:i};//store the index of the char
} else {// if a duplicate char found..
//store the current longest non-repeating chars. until now
//In case of equal-length, <= right-most str, < will result in left most str
if(longestStr.length <= str.length) {
longestStr = str;
}
//Get the previous duplicate char's index
var prevDupeIndex = hash[currChar].index;
//Find all the chars AFTER previous duplicate char and current one
var strFromPrevDupe = input.substring(prevDupeIndex + 1, i);
//*NEW* longest string will be chars AFTER prevDupe till current char
str = strFromPrevDupe + currChar;
//console.log(str);
//Also, Reset hash to letters AFTER duplicate letter till current char
hash = {};
for (var j = prevDupeIndex + 1; j <= i; j++) {
hash[input.charAt(j)] = {index:j};
}
}
}
return longestStr.length > str.length ? longestStr : str;
}
//console.log("stackoverflow => " + findLongestNonRepeatingSubStr("stackoverflow"));
//returns stackoverfl
//console.log("stackoverflowabcdefghijklmn => " +
findLongestNonRepeatingSubStr("stackoverflowabcdefghijklmn")); //returns owabcdefghijklmn
//console.log("1230123450101 => " + findLongestNonRepeatingSubStr("1230123450101")); //
returns 234501
We can consider all substrings one by one and check for each substring whether it contains all unique characters or not.
There will be n*(n+1)/2 substrings. Whether a substirng contains all unique characters or not can be checked in linear time by
scanning it from left to right and keeping a map of visited characters. Time complexity of this solution would be O(n^3).`
import java.util.ArrayList;
import java.util.Collections;
import java.util.HashMap;
import java.util.LinkedHashSet;
import java.util.List;
import java.util.Map;
import java.util.Set;
public class LengthOfLongestSubstringWithOutRepeatingChar {
public static void main(String[] args)
{
String s="stackoverflow";
//allSubString(s);
System.out.println("result of find"+find(s));
}
public static String find(String s)
{
List<String> allSubsring=allSubString(s);
Set<String> main =new LinkedHashSet<String>();
for(String temp:allSubsring)
{
boolean a = false;
for(int i=0;i<temp.length();i++)
{
for(int k=temp.length()-1;k>i;k--)
{
if(temp.charAt(k)==temp.charAt(i))
a=true;
}
}
if(!a)
{
main.add(temp);
}
}
/*for(String x:main)
{
System.out.println(x);
}*/
String res=null;
int min=0,max=s.length();
for(String temp:main)
{
if(temp.length()>min&&temp.length()<max)
{
min=temp.length();
res=temp;
}
}
System.out.println(min+"ha ha ha"+res+"he he he");
return res;
}
//substrings left to right ban rahi hai
private static List<String> allSubString(String str) {
List<String> all=new ArrayList<String>();
int c=0;
for (int i = 0; i < str.length(); i++) {
for (int j = 0; j <= i; j++) {
if (!all.contains(str.substring(j, i + 1)))
{
c++;
all.add(str.substring(j, i + 1));
}
}
}
for(String temp:all)
{
System.out.println("substring :-"+temp);
}
System.out.println("count"+c);
return all;
}
}
Another O(n) JavaScript solution. It does not alter strings during the looping; it just keeps track of the offset and length of the longest sub string so far:
function longest(str) {
var hash = {}, start, end, bestStart, best;
start = end = bestStart = best = 0;
while (end < str.length) {
while (hash[str[end]]) hash[str[start++]] = 0;
hash[str[end]] = 1;
if (++end - start > best) bestStart = start, best = end - start;
}
return str.substr(bestStart, best);
}
// I/O for snippet
document.querySelector('input').addEventListener('input', function () {
document.querySelector('span').textContent = longest(this.value);
});
Enter word:<input><br>
Longest: <span></span>
simple python snippet
l=length p=position
maxl=maxlength maxp=maxposition
Tested and working. For easy understanding, I suppose there's a drawer to put the letters.
Function:
public int lengthOfLongestSubstring(String s) {
int maxlen = 0;
int start = 0;
int end = 0;
HashSet<Character> drawer = new HashSet<Character>();
for (int i=0; i<s.length(); i++) {
char ch = s.charAt(i);
if (drawer.contains(ch)) {
//search for ch between start and end
while (s.charAt(start)!=ch) {
//drop letter from drawer
drawer.remove(s.charAt(start));
start++;
}
//Do not remove from drawer actual char (it's the new recently found)
start++;
end++;
}
else {
drawer.add(ch);
end++;
int _maxlen = end-start;
if (_maxlen>maxlen) {
maxlen=_maxlen;
}
}
}
return maxlen;
}
Longest substring without repeating character in python
public int lengthOfLongestSubstring(String s) {
if(s.equals(""))
return 0;
String[] arr = s.split("");
HashMap<String,Integer> map = new HashMap<>();
Queue<String> q = new LinkedList<>();
int l_till = 1;
int l_all = 1;
map.put(arr[0],0);
q.add(arr[0]);
for(int i = 1; i < s.length(); i++){
if (map.containsKey(arr[i])) {
if(l_till > l_all){
l_all = l_till;
}
while(!q.isEmpty() && !q.peek().equals(arr[i])){
map.remove(q.remove());
}
if(!q.isEmpty())
map.remove(q.remove());
q.add(arr[i]);
map.put(arr[i],i);
//System.out.println(q);
//System.out.println(map);
l_till = q.size();
}
else {
l_till = l_till + 1;
map.put(arr[i],i);
q.add(arr[i]);
}
}
if(l_till > l_all){
l_all = l_till;
}
return l_all;
}
I was asked the same question in an interview.
I have written Python3 code, to find the first occurrence of the substring with all distinct chars. In my implementations, I start with index = 0 and iterate over the input string. While iterating used a Python dict seems to store indexes of chars in input-string those has been visited in the iteration.
In iteration, if char c, does not find in current substring – raise KeyError exception
if c is found to be a duplicate char in the current substring (as c previously appeared during iteration – named that index last_seen) start a new substring
def lds(string: str) -> str:
""" returns first longest distinct substring in input `string` """
seens = {}
start, end, curt_start = 0, 0, 0
for curt_end, c in enumerate(string):
try:
last_seen = seens[c]
if last_seen < curt_start:
raise KeyError(f"{c!r} not found in {string[curt_start: curt_end]!r}")
if end - start < curt_end - curt_start:
start, end = curt_start, curt_end
curt_start = last_seen + 1
except KeyError:
pass
seens[c] = curt_end
else:
# case when the longest substring is suffix of the string, here curt_end
# do not point to a repeating char hance included in the substring
if string and end - start < curt_end - curt_start + 1:
start, end = curt_start, curt_end + 1
return string[start: end]
private static string LongestSubstring(string word)
{
var set = new HashSet<char>();
string longestOverAll = "";
string longestTillNow = "";
foreach (char c in word)
{
if (!set.Contains(c))
{
longestTillNow += c;
set.Add(c);
}
else
{
longestTillNow = string.Empty;
}
if (longestTillNow.Length > longestOverAll.Length)
{
longestOverAll = longestTillNow;
}
}
return longestOverAll;
}
import java.util.ArrayList;
import java.util.HashSet;
import java.util.LinkedHashSet;
import java.util.List;
import java.util.Set;
import java.util.TreeMap;
public class LongestSubString2 {
public static void main(String[] args) {
String input = "stackoverflowabcdefghijklmn";
List<String> allOutPuts = new ArrayList<String>();
TreeMap<Integer, Set> map = new TreeMap<Integer, Set>();
for (int k = 0; k < input.length(); k++) {
String input1 = input.substring(k);
String longestSubString = getLongestSubString(input1);
allOutPuts.add(longestSubString);
}
for (String str : allOutPuts) {
int strLen = str.length();
if (map.containsKey(strLen)) {
Set set2 = (HashSet) map.get(strLen);
set2.add(str);
map.put(strLen, set2);
} else {
Set set1 = new HashSet();
set1.add(str);
map.put(strLen, set1);
}
}
System.out.println(map.lastKey());
System.out.println(map.get(map.lastKey()));
}
private static void printArray(Object[] currentObjArr) {
for (Object obj : currentObjArr) {
char str = (char) obj;
System.out.println(str);
}
}
private static String getLongestSubString(String input) {
Set<Character> set = new LinkedHashSet<Character>();
String longestString = "";
int len = input.length();
for (int i = 0; i < len; i++) {
char currentChar = input.charAt(i);
boolean isCharAdded = set.add(currentChar);
if (isCharAdded) {
if (i == len - 1) {
String currentStr = getStringFromSet(set);
if (currentStr.length() > longestString.length()) {
longestString = currentStr;
}
}
continue;
} else {
String currentStr = getStringFromSet(set);
if (currentStr.length() > longestString.length()) {
longestString = currentStr;
}
set = new LinkedHashSet<Character>(input.charAt(i));
}
}
return longestString;
}
private static String getStringFromSet(Set<Character> set) {
Object[] charArr = set.toArray();
StringBuffer strBuff = new StringBuffer();
for (Object obj : charArr) {
strBuff.append(obj);
}
return strBuff.toString();
}
}
This is my solution, and it was accepted by leetcode. However, after I saw the stats, I saw whole lot solutions has much faster result....meaning, my solution is around 600ms for all their test cases, and most of the js solutions are around 200 -300 ms bracket.. who can tell me why my solution is slowwww??
var lengthOfLongestSubstring = function(s) {
var arr = s.split("");
if (s.length === 0 || s.length === 1) {
return s.length;
}
var head = 0,
tail = 1;
var str = arr[head];
var maxL = 0;
while (tail < arr.length) {
if (str.indexOf(arr[tail]) == -1) {
str += arr[tail];
maxL = Math.max(maxL, str.length);
tail++;
} else {
maxL = Math.max(maxL, str.length);
head = head + str.indexOf(arr[tail]) + 1;
str = arr[head];
tail = head + 1;
}
}
return maxL;
};
I am posting O(n^2) in python . I just want to know whether the technique mentioned by Karoly Horvath has any steps that are similar to existing search/sort algorithms ?
My code :
def main():
test='stackoverflow'
tempstr=''
maxlen,index=0,0
indexsubstring=''
print 'Original string is =%s\n\n' %test
while(index!=len(test)):
for char in test[index:]:
if char not in tempstr:
tempstr+=char
if len(tempstr)> len(indexsubstring):
indexsubstring=tempstr
elif (len(tempstr)>=maxlen):
maxlen=len(tempstr)
indexsubstring=tempstr
break
tempstr=''
print 'max substring length till iteration with starting index =%s is %s'%(test[index],indexsubstring)
index+=1
if __name__=='__main__':
main()
Simple and Easy
import java.util.Scanner;
public class longestsub {
static Scanner sn = new Scanner(System.in);
static String word = sn.nextLine();
public static void main(String[] args) {
System.out.println("The Length is " +check(word));
}
private static int check(String word) {
String store="";
for (int i = 0; i < word.length(); i++) {
if (store.indexOf(word.charAt(i))<0) {
store = store+word.charAt(i);
}
}
System.out.println("Result word " +store);
return store.length();
}
}
Not quite optimized but simple answer in Python
def lengthOfLongestSubstring(s):
temp,maxlen,newstart = {},0,0
for i,x in enumerate(s):
if x in temp:
newstart = max(newstart,s[:i].rfind(x)+1)
else:
temp[x] = 1
maxlen = max(maxlen, len(s[newstart:i + 1]))
return maxlen
I think the costly affair is rfind which is why it's not quite optimized.
This is my solution. Hope it helps.
function longestSubstringWithoutDuplication(str) {
var max = 0;
//if empty string
if (str.length === 0){
return 0;
} else if (str.length === 1){ //case if the string's length is 1
return 1;
}
//loop over all the chars in the strings
var currentChar,
map = {},
counter = 0; //count the number of char in each substring without duplications
for (var i=0; i< str.length ; i++){
currentChar = str.charAt(i);
//if the current char is not in the map
if (map[currentChar] == undefined){
//push the currentChar to the map
map[currentChar] = i;
if (Object.keys(map).length > max){
max = Object.keys(map).length;
}
} else { //there is duplacation
//update the max
if (Object.keys(map).length > max){
max = Object.keys(map).length;
}
counter = 0; //initilize the counter to count next substring
i = map[currentChar]; //start from the duplicated char
map = {}; // clean the map
}
}
return max;
}
here is my javascript and cpp implementations with great details: https://algorithm.pingzhang.io/String/longest_substring_without_repeating_characters.html
We want to find the longest substring without repeating characters. The first thing comes to my mind is that we need a hash table to store every character in a substring so that when a new character comes in, we can easily know whether this character is already in the substring or not. I call it as valueIdxHash. Then, a substring has a startIdx and endIdx. So we need a variable to keep track of the starting index of a substring and I call it as startIdx. Let's assume we are at index i and we already have a substring (startIdx, i - 1). Now, we want to check whether this substring can keep growing or not.
If the valueIdxHash contains str[i], it means it is a repeated character. But we still need to check whether this repeated character is in the substring (startIdx, i - 1). So we need to retrieve the index of str[i] that is appeared last time and then compare this index with startIdx.
If startIdx is larger, it means the last appeared str[i] is outside of the substring. Thus the subtring can keep growing.
If startIdx is smaller, it means the last appeared str[i] is within of the substring. Thus, the substring cannot grow any more. startIdx will be updated as valueIdxHash[str[i]] + 1 and the new substring (valueIdxHash[str[i]] + 1, i) has potential to keep growing.
If the valueIdxHash does not contain str[i], the substring can keep growing.
I modified my solution to "find the length of the longest substring without repeating characters".
public string LengthOfLongestSubstring(string s) {
var res = 0;
var dict = new Dictionary<char, int>();
var start = 0;
for(int i =0; i< s.Length; i++)
{
if(dict.ContainsKey(s[i]))
{
start = Math.Max(start, dict[s[i]] + 1); //update start index
dict[s[i]] = i;
}
else
{
dict.Add(s[i], i);
}
res = Math.Max(res, i - start + 1); //track max length
}
return s.Substring(start,res);
}
import java.util.HashMap;
import java.util.HashSet;
public class SubString {
public static String subString(String input) {
String longesTillNOw = "";
String longestOverAll = "";
HashMap<Character,Integer> chars = new HashMap<>();
char[] array=input.toCharArray();
int start=0;
for (int i = 0; i < array.length; i++) {
char charactor = array[i];
if (chars.containsKey(charactor) ) {
start=chars.get(charactor)+1;
i=start;
chars.clear();
longesTillNOw = "";
} else {
chars.put(charactor,i);
longesTillNOw = longesTillNOw + charactor;
if (longesTillNOw.length() > longestOverAll.length()) {
longestOverAll = longesTillNOw;
}
}
}
return longestOverAll;
}
public static void main(String[] args) {
String input = "stackoverflowabcdefghijklmn";
System.out.println(subString(input));
}
}
Here are two ways to approach this problem in JavaScript.
A Brute Force approach is to loop through the string twice, checking every substring against every other substring and finding the maximum length where the substring is unique. We'll need two functions: one to check if a substring is unique and a second function to perform our double loop.
// O(n) time
const allUnique = str => {
const set = [...new Set(str)];
return (set.length == str.length) ? true: false;
}
// O(n^3) time, O(k) size where k is the size of the set
const lengthOfLongestSubstring = str => {
let result = 0,
maxResult = 0;
for (let i=0; i<str.length-1; i++) {
for (let j=i+1; j<str.length; j++) {
if (allUnique(str.substring(i, j))) {
result = str.substring(i, j).length;
if (result > maxResult) {
maxResult = result;
}
}
}
return maxResult;
}
}
This has a time complexity of O(n^3) since we perform a double loop O(n^2) and then another loop on top of that O(n) for our unique function. The space is the size of our set which can be generalized to O(n) or more accurately O(k) where k is the size of the set.
A Greedy Approach is to loop through only once and keep track of the maximum unique substring length as we go. We can use either an array or a hash map, but I think the new .includes() array method is cool, so let's use that.
const lengthOfLongestSubstring = str => {
let result = [],
maxResult = 0;
for (let i=0; i<str.length; i++) {
if (!result.includes(str[i])) {
result.push(str[i]);
} else {
maxResult = i;
}
}
return maxResult;
}
This has a time complexity of O(n) and a space complexity of O(1).
This problem can be solved in O(n) time complexity.
Initialize three variables
Start (index pointing to the start of the non repeating substring, Initialize it as 0 ).
End (index pointing to the end of the non repeating substring, Initialize it as 0 )
Hasmap (Object containing the last visited index positions of characters. Ex : {'a':0, 'b':1} for string "ab")
Steps :
Iterate over the string and perform following actions.
If the current character is not present in hashmap (), add it as to
hashmap, character as key and its index as value.
If current character is present in hashmap, then
a) Check whether the start index is less than or equal to the value present in the hashmap against the character (last index of same character earlier visited),
b) it is less then assign start variables value as the hashmaps' value + 1 (last index of same character earlier visited + 1);
c) Update hashmap by overriding the hashmap's current character's value as current index of character.
d) Calculate the end-start as the longest substring value and update if it's greater than earlier longest non-repeating substring.
Following is the Javascript Solution for this problem.
var lengthOfLongestSubstring = function(s) {
let length = s.length;
let ans = 0;
let start = 0,
end = 0;
let hashMap = {};
for (var i = 0; i < length; i++) {
if (!hashMap.hasOwnProperty(s[i])) {
hashMap[s[i]] = i;
} else {
if (start <= hashMap[s[i]]) {
start = hashMap[s[i]] + 1;
}
hashMap[s[i]] = i;
}
end++;
ans = ans > (end - start) ? ans : (end - start);
}
return ans;
};
Question: Find the longest substring without repeating characters.
Example 1 :
import java.util.LinkedHashMap;
import java.util.Map;
public class example1 {
public static void main(String[] args) {
String a = "abcabcbb";
// output => 3
System.out.println( lengthOfLongestSubstring(a));
}
private static int lengthOfLongestSubstring(String a) {
if(a == null || a.length() == 0) {return 0 ;}
int res = 0 ;
Map<Character , Integer> map = new LinkedHashMap<>();
for (int i = 0; i < a.length(); i++) {
char ch = a.charAt(i);
if (!map.containsKey(ch)) {
//If ch is not present in map, adding ch into map along with its position
map.put(ch, i);
}else {
/*
If char ch is present in Map, reposition the cursor i to the position of ch and clear the Map.
*/
i = map.put(ch, i);// updation of index
map.clear();
}//else
res = Math.max(res, map.size());
}
return res;
}
}
if you want the longest string without the repeating characters as output then do this inside the for loop:
String res ="";// global
int len = 0 ;//global
if(len < map.size()) {
len = map.size();
res = map.keySet().toString();
}
System.out.println("len -> " + len);
System.out.println("res => " + res);
def max_substring(string):
last_substring = ''
max_substring = ''
for x in string:
k = find_index(x,last_substring)
last_substring = last_substring[(k+1):]+x
if len(last_substring) > len(max_substring):
max_substring = last_substring
return max_substring
def find_index(x, lst):
k = 0
while k <len(lst):
if lst[k] == x:
return k
k +=1
return -1
can we use something like this .
def longestpalindrome(str1):
arr1=list(str1)
s=set(arr1)
arr2=list(s)
return len(arr2)
str1='abadef'
a=longestpalindrome(str1)
print(a)
if only length of the substring is to be returned
Algorithm: 1) Initialise an empty dictionary dct to check if any character already exists in the string. 2) cnt - to keep the count of substring without repeating characters. 3)l and r are the two pointers initialised to first index of the string. 4)loop through each char of the string. 5) If the character not present in the dct add itand increse the cnt. 6)If its already present then check if cnt is greater then resStrLen.7)Remove the char from dct and shift the left pointer by 1 and decrease the count.8)Repeat 5,6,7 till l,r greater or equal to length of the input string. 9)Have one more check at the end to handle cases like input string with non-repeating characters.Here is the simple python program to Find longest substring without repeating characters
a="stackoverflow"
strLength = len(a)
dct={}
resStrLen=0
cnt=0
l=0
r=0
strb=l
stre=l
while(l<strLength and r<strLength):
if a[l] in dct:
if cnt>resStrLen:
resStrLen=cnt
strb=r
stre=l
dct.pop(a[r])
cnt=cnt-1
r+=1
else:
cnt+=1
dct[a[l]]=1
l+=1
if cnt>resStrLen:
resStrLen=cnt
strb=r
stre=l
print "Result String Length : "+str(resStrLen)
print "Result String : " + a[strb:stre]
The solution in C.
#include<stdio.h>
#include <string.h>
void longstr(char* a, int *start, int *last)
{
*start = *last = 0;
int visited[256];
for (int i = 0; i < 256; i++)
{
visited[i] = -1;
}
int max_len = 0;
int cur_len = 0;
int prev_index;
visited[a[0]] = 0;
for (int i = 1; i < strlen(a); i++)
{
prev_index = visited[a[i]];
if (prev_index == -1 || i - cur_len > prev_index)
{
cur_len++;
*last = i;
}
else
{
if (max_len < cur_len)
{
*start = *last - cur_len;
max_len = cur_len;
}
cur_len = i - prev_index;
}
visited[a[i]] = i;
}
if (max_len < cur_len)
{
*start = *last - cur_len;
max_len = cur_len;
}
}
int main()
{
char str[] = "ABDEFGABEF";
printf("The input string is %s \n", str);
int start, last;
longstr(str, &start, &last);
//printf("\n %d %d \n", start, last);
memmove(str, (str + start), last - start);
str[last] = '\0';
printf("the longest non-repeating character substring is %s", str);
return 0;
}
public int lengthOfLongestSubstring(String s) {
int startIndex = 0;
int maxLength = 0;
//since we have 256 ascii chars
int[] lst = new int[256];
Arrays.fill(lst,-1);
for (int i = 0; i < s.length(); i++) {
char c = s.charAt(i);
//to get ascii value of c
int ic = (int) c;
int value = lst[ic];
//this will say to move start index to next index of the repeating char
//we only do this if the repeating char index is greater than start index
if (value >= startIndex) {
maxLength = Math.max(maxLength, i - startIndex);
startIndex = value + 1;
}
lst[ic] = i;
}
//when we came to an end of string
return Math.max(maxLength,s.length()-startIndex);
}
This is the fastest and it is linear time and constant space

JavaME: Convert String to camelCase

What would be a simple implementation of a method to convert a String like "Hello there everyone" to "helloThereEveryone". In JavaME support for String and StringBuffer utility operations are quite limited.
Quick primitive implementation. I have no idea of restrictions of J2ME, so I hope it fits or it gives some ideas...
String str = "Hello, there, everyone?";
StringBuffer result = new StringBuffer(str.length());
String strl = str.toLowerCase();
boolean bMustCapitalize = false;
for (int i = 0; i < strl.length(); i++)
{
char c = strl.charAt(i);
if (c >= 'a' && c <= 'z')
{
if (bMustCapitalize)
{
result.append(strl.substring(i, i+1).toUpperCase());
bMustCapitalize = false;
}
else
{
result.append(c);
}
}
else
{
bMustCapitalize = true;
}
}
System.out.println(result);
You can replace the convoluted uppercase append with:
result.append((char) (c - 0x20));
although it might seem more hackish.
With CDC, you have:
String.getBytes();//to convert the string to an array of bytes
String.indexOf(int ch); //for locating the beginning of the words
String.trim();//to remove spaces
For lower/uppercase you need to add(subtract) 32.
With these elements, you can build your own method.
private static String toCamelCase(String s) {
String result = "";
String[] tokens = s.split("_"); // or whatever the divider is
for (int i = 0, L = tokens.length; i<L; i++) {
String token = tokens[i];
if (i==0) result = token.toLowerCase();
else
result += token.substring(0, 1).toUpperCase() +
token.substring(1, token.length()).toLowerCase();
}
return result;
}
Suggestion:
May be if you can port one regexp library on J2ME, you could use it to strip spaces in your String...
Try following code
public static String toCamel(String str) {
String rtn = str;
rtn = rtn.toLowerCase();
Matcher m = Pattern.compile("_([a-z]{1})").matcher(rtn);
StringBuffer sb = new StringBuffer();
while (m.find()) {
m.appendReplacement(sb, m.group(1).toUpperCase());
}
m.appendTail(sb);
rtn = sb.toString();
return rtn;
}
I would suggest the following simple code:
String camelCased = "";
String[] tokens = inputString.split("\\s");
for (int i = 0; i < tokens.length; i++) {
String token = tokens[i];
camelCased = camelCased + token.substring(0, 1).toUpperCase() + token.substring(1, token.length());
}
return camelCased;
I would do it like this:
private String toCamelCase(String s) {
StringBuffer sb = new StringBuffer();
String[] x = s.replaceAll("[^A-Za-z]", " ").replaceAll("\\s+", " ")
.trim().split(" ");
for (int i = 0; i < x.length; i++) {
if (i == 0) {
x[i] = x[i].toLowerCase();
} else {
String r = x[i].substring(1);
x[i] = String.valueOf(x[i].charAt(0)).toUpperCase() + r;
}
sb.append(x[i]);
}
return sb.toString();
}
check this
import org.apache.commons.lang.WordUtils;
String camel = WordUtils.capitalizeFully('I WANT TO BE A CAMEL', new char[]{' '});
return camel.replaceAll(" ", "");

Resources