Controlling Internet Explorer local intranet using Excel VBA - excel

Question

I am using Excel VBA code to click a button on our website. I know this isn't the best of things to be doing, but it is the least objectionable option available to me.
I can using this code, successfully load imdb.com, google, etc. But when I load our local site, I lose control of the ie object, I can't check readyState, I can't Quit.
Here is the error I get.
Run-time error '-2147023179 (800706b5)':
Automation error
The interface is unknown
Every so often I instead get this message:
Run-time error '-2147417848 (80010108)':
Automation error
The object invoked has disconnected from its clients.
Clicking Debug indicates the ie.readyState, I commented that out and then it points to ie.Quit
Sub dothestuff()
Dim ie As InternetExplorer
Set ie = New InternetExplorer
ie.Visible = True
ie.Navigate "http://www.google.com/"
anerror = webload(ie)
ie.Quit
Set ie = Nothing
End Sub
Function webload(ie)
Do Until ie.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
End Function

Answer 1

Here is a quick and easy solution for this issue:
Instead of:
set IE = createobject("internetexplorer.application")
Use:
Set IE = New InternetExplorerMedium
No need to tweak the IE settings

Answer 2

Here's what's happening. When your browser internally "jumps" to a different security zone - from say a local address to an inTRAnet address or to an inTERnet address - IE closes/drops the current process of IE and opens another one with tighter security. The old and new IE processes are IE child processes to the parent IE task so you don't see it happen either by watching the browser or watching the process in Task Manager. If you use Process Explorer (free from Microsoft), you can see this happen.
What you need to do in this type of environment is use Anup Upadhyay's solution above. His code snippet looks at all IE tasks (parent and child doesn't make a difference) and finds the new IE process that is pointing to the web address that the original process was given. As long as you don't have multiple browsers open to the same address, it will find the new process reliably and carry on like you would expect it to.
Note: You might also need to use the InternetExplorerMedium object as opposed to the InternetExplorer object. It is also better at "holding on" to a session.
Here's my version which is almost the same thing as Anup's.
References for MS Office VBA:
Microsoft Internet Controls
Microsoft Shell Controls and Automation
n
Dim IE As InternetExplorerMedium ' This object (the "medium" variety as opposed to "InternetExplorer") is necessary in our security climate
Dim targetURL As String
Dim webContent As String
Dim sh
Dim eachIE
targetURL = "[your URL here]"
Set IE = New InternetExplorerMedium
IE.Visible = False ' Set to true to watch what's happening
IE.Navigate targetURL
While IE.Busy
DoEvents
Wend
Do
Set sh = New Shell32.Shell
For Each eachIE In sh.Windows
If InStr(1, eachIE.LocationURL, targetURL) Then
Set IE = eachIE
'IE.Visible = False 'This is here because in some environments, the new process defaults to Visible.
Exit Do
End If
Next eachIE
Loop
Set eachIE = Nothing
Set sh = Nothing
While IE.Busy ' The new process may still be busy even after you find it
DoEvents
Wend

Answer 3

Try this one:
Set IE = GetObject("new:{D5E8041D-920F-45e9-B8FB-B1DEB82C6E5E}")

Answer 4

We had this problem using IE9. It arises because of security settings. There is a setting called "Enable Protected Mode" on the "Security" tab of the "Internet Options" dialog box (tools...internet options). Each "zone" can have a different setting for "enable protected mode" We unchecked "enable protected mode" and this solved our problem. I think what is happening is that when switch to a zone that is in protected mode, IE starts a new process to handle traffic in that zone (maybe killing the old process). When this happens your IE object variable in VBA gets disconnected from Internet Explorer.

Answer 5

Alright, just found a solution, decided out of desperation to try loading 127.0.0.1 instead of localhost, sure enough, no problems, so resolved the ip address of the local intranet server, and now I am good to go.
I don't really understand why, but this has solved my issue.

Answer 6

Dim IE As Object
Set IE = CreateObject("InternetExplorer.Application")
IE.Visible = False
IE.Navigate "C:\abc.html"
'We are getting error here , I have found a small tricky alternate solution for this as below
'Take reference for Microsoft Shell Controls And Automation
'Use below code to reassign IE object for the lost connection issue
Dim sh
Dim eachIE
Do
Set sh = New Shell32.Shell
For Each eachIE In sh.Windows
' Check if this is the desired URL
' Here you can use your condition except .html
' If you want to use your URL , then put the URL below in the code for condition check.
' This code will reassign your IE object with the same reference for navigation and your issue will resolve.
'
If InStr(1, eachIE.locationurl, ".html") Then
Set IE = eachIE
Exit Do
End If
Next eachIE
Loop

Answer 7

For me, the following worked:
Open Internet explorer
Go to tools
Goto Internet options
Switch to Security tab
Click Trusted sites
Click sites
You will see the site url, select it
Click Remove
Click close, apply and Ok
Ps. I tested these steps on IE 8 browser.

Answer 8

Maybe you're having a problem with binding? That's a strange error to get for this.
Try this code (adapted from http://www.excely.com/excel-vba/ie-automation.shtml). Hopefully it helps:
Option Explicit
' lasts for the life of Excel being open
Dim ie As Object
Sub dothestuff()
Set ie = CreateObject("InternetExplorer.Application")
ie.Visible = True
ie.Navigate "http://www.google.com/"
Do While ie.Busy
DoEvents
Loop
ie.Quit
Set ie = Nothing
End Sub

Answer 9

I am having the exact same issue working with a website that is inside our company intranet and is also included in my trusted sites. Disabling protected mode allows me to check ReadyState, but only if I disable for the internet zone in addition to intranet and trusted sites.
Why would enabling protected mode for the internet zone cause the automation error when checking ReadyState on a trusted site? Is there a way around this without disabling protected mode for the internet zone?

Answer 10

Another solution..
Set IE = CreateObject("InternetExplorer.Application")
IE.Navigate ("http://URLOnMyIntranet/site.html")
IE.Visible = True
Set IE = nothing
Set objShellApp = CreateObject("Shell.Application")
For Each objWindow In objShellApp.Windows
Debug.Print objWindow.LocationName
If LCase(objWindow.LocationName) = LCase("Your windows name, use debug to find out") Then
Set IE = objWindow
End If
Next
Note, using InternetExplorerMedium (see other answers) usually all you need, FYI also you could use Url property obj.LocationURL instead of window name which would be more accurate. See other answers.

Answer 11

Dim IE As InternetExplorer
Set IE = New InternetExplorerMedium
IE.Navigate "yousite.org"
IE.Visible = True
Do While IE.Busy
DoEvents
Loop
Set HTML = IE.document
Do
var8 = HTML.DocumentElement.innerHTML
v3 = var8
v4 = InStrRev(v3, "the class or ID you are looking for when the _
page final loads", -1)
Loop While v4 = 0
Do While IE.Busy
DoEvents
Loop
'Your in the new page look for elements and click rinse and repeat
'the Do loop. This method works with my intranet corporate site