I have a ribbon button on the case entity that updates a single two-option field on the form via javascript. When this is used on a case that has been resolved/closed it returns an error as the form is now read only.
Is there a way in javascript that I could get it to re-activate the form, change the field and then put it back to the way it was before? I have tried to force the change on the form but even if i manage to make it appear that you can save it, it will return the error as the form record is still counted as de-activated, even though you can change the fields
Thanks
You should be able to use a SOAP call for this, its a little involved, I would suggest starting here. You have to generate XML that represents the request, the link provides some tools to do this.
I believe you will need to issue JavaScript versions of SetStateRequest (to open) and CloseIncidentRequest (to close).
On the other hand, which is a different approach entirely, is to disable the button when the record is deactivated, then users have to manually renable the record make the change and close again. This is closer to 'working with the system' which I have touched upon here, its a different situation but the principle still applies.
Related
I've created a version tracking that will show all the edited document inside view. What if I want to make all document be draft at the same time, and during that, document can't be edit. And after I click save, all draft document will be saved at the same time.
Edit 1
I have one more question when I do version tracking, how can I make all response document cannot be edit? only current document can be edit?
UPDATE QUESTION
Currently, I am using version tracking to show all list with all edit document. So for now, every time I click EDIT, it will show all history of updated.
So I want create a situation where I have 2 edit option which is EDIT and PC Specification. I want to set PC Specification after edit document, it updated all history under version tracking, but for EDIT I don't want it update under version tracking. Because, for EDIT function, it only for edit one or two information BUT for PC Specification, it is to update all information. For example, I have 3 documents inside the "Computer" view.
When I open one document, it will show document details. On top menu, I have two buttons which are Edit and Close Windows. So can I add one more toolbar? Which is PC Spec as below?
So I will click the PC Spec button on the toolbar then the documents will open as a new document with same document information. Same as edit function. After I click save, it overwrite document + show edit history
For another situation where I click EDIT, same as PC Spec but after I click save, it overwrite document only.
As shown below, the history is when document edit using PC Spec only.
Another question, I have "Archived" view. How can I show only history of document inside "Archived" view?
Hope you guys can understand this. Please ask me anything if you not understand. Any help will be appreciated. Thanks! :)
Regarding your second question, to make all response documents non-editable, you will have to
Give your regular users Author access instead of Editor access in the database's Access Control List and assign them a role, which I'll call "AppUsers".
Give yourself and anyone else who will be responsible for managing the app a role which I'll call "AppAdmins".
Add a hidden computed field with type "Authors" to the form and set the initial value formula to
#If(#IsResponseDoc;"[AppAdmins]";"[AppUsers]":"[AppAdmins]")
Note that this will not have any effect on existing documents until you refresh and re-save them.
Then, you're going to have to hope that automatic versioning refreshes the documents. I'm not sure if it does or does not. If it does not, then you're probably going to have to give up on using the native versioning and write your own version using LotusScript. As I recall, that's what was done in the standard Lotus document library template, because the native versioning is pretty limited in what it can do.
As for your first question, I'm sorry but I really don't understand what you're asking. I can't tell in some parts whether you are telling us what you have already done, or what you want to do. Here on StackOverflow, the best way to get useful answers is to show us very clearly what you have tried, tell us what happens, and tell us what you thought should have happened instead. This is a place for helping you fix your code, not a place to get tutorials that amount to explicit instructions on how to write your code in the first place.
I was playing around with run With Document Context almost the whole day. Maybe someone can help to find me a feasible solution.
If i run the agent in before page load / before render response / query Open Document event i am able to pass values back to the xpage without saving the document. I tried also to save the document but it didnt help.
Beside these two events i didn't find a way to call the agent and bring the values from the lotus notes agent back. Can anybody think of an event that would work?
Calling an agent does work from anywhere you can call SSJS. Some considerations are on my blog.
However there is one big, big caveat: when you try to use a document (saved or unsaved) that is bound to a datasource in your current XPage, then the values in the datasource will overwrite the changes in the backend document. This could be your issue?
As David suggests: use SSJS & Java. It is less work than you might fear and you can pay down some technical debt
How about just creating a new Domino document, put the fields on it that you want to send, call your agent, and then get back those fields. Then populate whatever you need to on the XPage (getComponent("name").setValue(value).
There is no need to save this temporary document and it will just end up going away when your code runs.
Just for reference before mentioning the problem I would like to say that I have asked to same question on IBM Lotus forum(http://www-10.lotus.com/ldd/ndseforum.nsf/xpTopicThread.xsp?documentId=2AD7C8F89D8930E685257BD50022A9E9) and I have not received any reply for the same in last 2 weeks.
So, I have a typical xpage dropdown menu with say around 40-50 leaf nodes, Every leaf node submits a specific value (using submitValue property) which is then evaluated and action is performed. However, the problem is that, after the action is performed if I try to refresh the page i get the browser notification for re-submission (I believe that it is some kind of programming error by me, however I don't know how to resolve it.)
One example to make it more clear:
I have a delete node inside the dropdown. It basically deletes the selected entries from the view(generated using repeat control) and then refreshes the view content. But at this point of time if I try to refresh the page then I get the notification of re-submission by the browser. If I accept it, then it tries to delete it again (which I prevent it but still this shouldn't happen) and if I don't accept it, it just doesn't refresh the page.
Any reply would be appreciated.
Thank you in advance. Hoping to hear some suggestions. (Please let me know if event he code is required)
I believe you need to implement the Post/Redirect/Get pattern to avoid re-posting on refresh.
Here's a solution by Tommy Valand for XPages for that pattern: http://dontpanic82.blogspot.dk/2010/06/xpages-avoid-saving-duplicate-documents.html
In a production application that I have developed sometimes I get an error saying .getDocument() is null. I have added checks in my code that traps an error if this happens. And the strange thing is that the XSPDocument seams to be OK.
Any other ideas how to debug the cause of this?
========================================================
Edit
The lower parts of the application is a simple database, create an assignment it gets status new
change the status to ongoing thru a button. Add information in text, date and numberfields, no Richtext, no attachments.
The user can switch to another xpage to send this document is an pdf attachment in an email.
The user can save the document as a draft
When they are done the click on an approve button and this button will set the status to approved. Save the document and send it as an pdf to an email adress
The problem ocurrs both on the Save button and on the approve button.
.getDocument from the xsp document is null the xspdocument.getNoteID return an ID
I can do replaceitemvalue on the xsp document.
It never happens on new documents only existing what I have seen
It feels like the comment from David that the backend doc is dropped/recycled
we experienced the same getDocument() problem recently. Finally we found a root cause: two different XPages were loaded simultaneously via iFrames. One of those XPages produced run-time error randomly, in 25% of cases. A sort of conflict in JSF model in context of single session.
solution: viewState="nostate"
not sure if it helps in your case, but this option resolved a lot of problems in our applications. It was introduced in 8.5.3. And it should be especially useful for so called XAgents.
Hard to give a hint without knowing more about everything else, but I remember having seen this as well. Just a few ideas:
Is XSPDocument.getNoteID() pointing to a valid Document if this happens?
Is it maybe pointing to a different doc than what you expected?
Could there be some kind of dynamic change of datasources going on?
Maybe some kind of timeout so that the server all of a sudden forgot who you are (in rare cases this happens to me)?
Lothar/edcom
It would be helpful to have a few more details. I assume that the document has previously been saved and it's not a new note?
You're not trying to put the actual document object inside a scoped variable are you? That would be bad as that would be pretty toxic. Without knowing more I would think this could be the case. The backend document has been garbage collected.
I have a request form I'm working on, wherein different departemnts need to be able to update it. To minimize overlap and lost changes I'd like to be able to submit data from the new form to different lists, but I cannot find a way to do this.
Does anyone have any experience trying to do anything similar?
If you're familiar with JQuery andSPServices I could envisage a way to do this.
In the EditForm.aspx, add the JQuery and SPServices libraries. using the $.(document).Ready function, I'd do a quick item update with the SPServices and just copy a column with the same data, so in effect no change looks to have taken place. I'd add in the edit comments something like "Pseduo checkout to [name], [date_time]".
Then allow the user to edit the form as normal but in the code you've added, you trap the PreSave Action and check that the person trying to do the save is the same as the last modified - if it is, save as normal, otherwise, return false on the PreSave and it will be denied. When you actually allow the save, set the edit comments to something sensible.
To complete this, check before doing the pseudo checkout, that the last comments don't contain the psuedo checkout phrase so that you can prevent anyone opening/editing the form whilst somebody else is in the middle of an edit.
This gives a cheap and relatievly easy to implement Check-In/Check-Out for a list. Not perfect of course but should work well in most scenarios (not in datasheet though, so you might need to prevent that type of edit).
If you have two lists would you not then have the problem of potentially two requests for the same thing?
Does none of the version control options for the list solve the problem of potentially multiple concurrent editors?
While SPService is certainly a solution, but you will have to build a UI of ur own.
Try writing a event receiver, which can copy over item to another list as soon as it is created.
It will be nice if you can tell why you really want to have a copy of item in another list
i.e. Auditing purpose etc. , you can get a perfect solution for this in Forum