I need to prompt user to insert second Disc to continue installation. I am able to prompt user to insert Disc but how do I detect whether the user inserted a Disc or not, and if Inserted I need to run the setup.exe file from the DVD.
MessageBox MB_YESNO|MB_ICONQUESTION "Insert disc to install User Software or Click No to proceed" /SD IDNO IDYES yes IDNO no
yes:
Call installUserSoftware
no:
;do nothing
If you take the code in the answers to your other questions you should now have enough information about enumerating and detecting drives.
To detect the correct drive you need to look for something specific on the disc, it can be as simple as using IfFileExists on a file with a known name or maybe try reading something from a .ini file you know exists on the drive with a certain value (ReadINIStr). You could even check the version information on a .exe or .dll with GetDLLVersion.
Related
I have seen this was asked in the bask back in 2008 and can't find anything newer on the subject so I am bring it up again.
Is there a way to prevent a user from extracting the files from the installer and reading the nsi file.
I read something the opcode needs to be changed in the exe of nsis. Has NSIS come up with a plugin or something so users do not have to modify the exe?
If there an easy way or is it still messing with the exe. and if so can you point me in the right direction on how to do this or if someone has already posted a version
Thank!
NSIS is open source so it is not unsurprising that people are able to write decompilers.
There is no easy way to prevent it and the recommended method is still the same; change the order of the opcodes in \Source\exehead\fileform.h and compile NSIS.
To prevent most people from getting access to your files you can use one of the zip/7z/rar plug-ins from the NSIS Wiki that accepts a password and include a password protected archive in your installer. Keep in mind that a sophisticated user can run the installer in a debugger and find your password when you call the plug-in to extract the files.
I have a customer using Host Intrusion Protection and has set every User's temp folder not to allow execution (C:\users\\AppData\Local\Temp). NSIS extracts all plugin dlls and its own dlls into a folder below %TEMP%. The problem is nothing is allow to execute from temp so the entire install fails. What I need to know is how to tell NSIS to use a different folder. The only work around I can find is to edit the TEMP and TMP values under the registry key HCU\Environment from "%USERPROFILE%\AppData\Local\Temp" to something like C:\NSISTEMP. However even though this works changing the registry and then putting it back is not really an option. I also cannot just redirect InitPluginDir as that only effects plug-ins and not the rest of what NSIS extracts (icons xml files etc...). Any ideas?s
You can set %TMP% in a terminal/console window before running the installer, there is no need to edit the registry.
In NSIS v3+ you can use UnsafeStrCpy:
Function .onInit
UnsafeStrCpy $Temp "c:\foo\bar"
CreateDirectory "$Temp"
FunctionEnd
The real problem is the security "solution", why would preventing execution from %Temp% but not from other directories really provide any protection after the bad guys find out about this restriction?
If the installer is started with the special _?=$InstDir parameter then it is not copied to %Temp%.
Try this (look for more info in documentation) maybe it is safer than overriding $Temp folder and so on.
I been using NSIS for simple installers. I am now at a point where i need to install files to a user's specific location. For example, in my case, the palette directory where i need to put the new palettes is C:\Users\Russ\Documents\My Palettes.
How can i determine, automatically, the current user (Russ) when the installer executes. (Or is this something i have to prompt the user for?)
I've looked at other NSIS constants, but couldn't find something particular for this.
My documents is listed in the constants list.
MessageBox mb_ok "$Documents\My Palettes"
I am trying to edit the corflags file so that I can run 32bit applications on a 64 bit pc but everytime I try to edit the file using something like corflags.exe assembly /32bit+ it comes up with the error message cf001 could not open file for writing.
Now I have tried a lot of different options such as:
Running in administrator mode;
Finding the file using a search and checking read only is not ticked
Checking that user full control is ticked
Tried to set the whole folder to non read only
When trying the whole folder, it goes through looking like it has set read-only, but then I click OK and re-right click on the whole folder, the box is filled in (not ticked) does this mean that part of the folder is read only and why does it reset to read only?
I just faced the same problem and have tried the same things.
Run cornflags from an elevated ("Run as administrator") Visual Studio Command Prompt. I did the same for a copy of the original .exe just to make sure no other process was using the program.
Create a copy of the file you intend to target with CorFlags.
(e.g. "WcfServiceHost.exe" --creates--> "WcfServiceHost - Copy.exe")
Rename the original file to something else:
(e.g. "WcfServiceHost.exe" --> "WcfServiceHose_Original.exe")
Rename to copy to the original file name
(e.g. "WcfServiceHose - Copy.exe" --> "WcfServiceHost.exe"
For my purposes, I created copies and named them describing their configuration:
Example:
WCFServiceHost_With32BitOn.exe
WCFServiceHost_With32BitOff.exe
Now I can destroy the WCFServiceHost.exe files and create them from these pre-modified copies. No more CorFlags operations necessary.
Note: this is basically a more verbose version of #RMalke answer and that answer should be marked as the answer.
I realise this is years later, but for anyone else looking, I found that the quickest way was to copy cmd and corflags.exe into the same folder as the one you want to edit. Then run cmd as admin from there.
I wanted to write an NSIS script, let's call it for now setup.nsi, and check
if several required dll files already exists in $SYSDIR
Let me emphasize on the word "several"
What I understand from nsis IfFileExists documentation is that if I type in:
IfFileExists $SYSDIR\blabla.dll +2 +1
then it checks if blabla.dll is in $SYSDIR .. but what if I want to know if *.dll from where setup.nsi copies the file (i.e. the *.dll's that I am interested in installing in.. and they are a lot of them.. so I can't just go around checking for all the names) exists in $SYSDIR
During uninstallation I want to then be able to delete them from $SYSDIR (using some uninstall.log to see if I really copied them in $SYSDIR.. and again the wildcard question).
Please be patient with me as I am really new to NSIS scripts.
Is it REALLY necessary to write and delete in $SYSDIR ? Unless yours is a system file, there's no reason for it to be in $__SYS__DIR. If you need to use a specific version of a library, consider DLL redirection (put your DLL in your app dir and use the .local feature) - see the MSDN article on DLL redirection and Side-by-side assemblies.
Plus, you are one typo away from wrecking the user's computer ("Deleted: C:\Windows\System32\user32.dll").
As Piskvor mentions, I don't think you should be worrying about deleting system DLLs in the uninstaller. In case you want to overwrite system DLLs with an updated version, you may want to look at the SetOverwrite command. It lets you overwrite files if what you've got is newer.
Windows XP (SP2?) and up has file protection for system32, so you can't overwrite system critical files in there.
Do try to stay away from that.
Also, to check for your file specifically, see if there's a plugin for NSIS that can calculate checksums and compare that on uninstall. That's probably the safest, IF you really need to do it.
I'd suggest install files somewhere else and add that to PATH.