I'm not quite sure where to go with the initially...
I've got an application that has been built in VS2010, using both MFC and .NET 2.0. I then installed VS2012. Before even launching VS2012 I've tried running the application again and it now crashes just after startup with an "Application has stopped working" error.
It does however work, if I launch the application via an F5 in VS2010 (i.e. Debugger attatched right from the start).
Does anyone have any suggestions on what possible causes/fixes there may be for this? I'm currently not sure what to look for.
You probably never installed the redistributable packages for the VS2010 runtimes. Use Dependency Walker or similar tools to find out what DLL is missing, figure out where it comes from, and install that runtime package.
Ultimately it was completely unrelated to VS2012 - doh. Had an old executable that was being run, and a number of dependencies were missing.
Related
I'm trying to investigate why would my app, written in VC 2008, crash on bare Windows XP with c0000005. It works great on any windows vista and 7. On XP it would crash with no additional info. Below are the details and the result of a few days worth of my headaches, eliminating one reason after another. Here's the details:
I have Win7 ultimate with XP Mode with iexplore 6 and presumably no patches whatsoever.
I install my program and nothing else, since it is supposed to be install-and-run thing with no additional packages needed.
My app has compiled-in VC2008 runtime (using /MT, as opposed to /MD compiler switch)
I'm using firebird embedded, which needs VC2005 (edited, i wrote VC2008 before) libs for itself anyway, so i put them in my app's working dir
when i install VC++ 2008 on this XP Mode machine, it doesn't crash anymore, so debugging this way is impossible
I've narrowed this error's occurence down to the VC2005 runtime - right after i install it my app stops crashing. But i don't know what could be using it's components. When running the release version under VC2008 IDE, nothing shows any vc2005 libs being loaded (weird, if i say so myself).
My app's linker's dependencies lists these (i added only the first two, the rest was there courtesy of VisualStudio): jpeg.lib, gdiplus.lib, kernel32.lib, user32.lib, gdi32.lib, winspool.lib, comdlg32.lib, advapi32.lib, shell32.lib, ole32.lib, oleaut32.lib, uuid.lib, odbc32.lib, odbccp32.lib, comctl32.lib, %(AdditionalDependencies)
I am also using IBPP firebird interface, which loads these dynamically, so they are present in my app's dir (they need msvc?80.dlls):
fbembed.dll, ib_util.dll, icudt30.dll, icuin30.dll, icuuc30.dll, msvcp80.dll, msvcr80.dll
Please advise why would vc2005 runtime be a remedy for my app to not crash on a bare Win XP. Or how could i debug that one without installing vc 2008 on target machine. I'm starting to blame windows xp's components. Ultimately i want my app to not require any additional packages, such as VC2008 or 2005, especially when no component of my app requires the latter.
I am also using IBPP firebird interface ... msvcp80.dll, msvcr80.dll
The answer is in your question, these DLLs are VS2005 runtime support DLLs. They cannot be stored in your exe directory, they must be registered in the side-by-side cache. This does not typically cause an AV, but it isn't impossible if the code doesn't check the return value of LoadLibrary(). You can download an installer for them from Microsoft. It doesn't otherwise have anything to do with Windows XP, you just happened to try to run this program on machines that already had the DLLs installed. Very common on a dev machine for example.
If you don't want a dependency on them then you'll have to rebuild those DLLs that require it. Which is a good idea, having a dependency on more than one version of the CRT is pretty unhealthy.
If you are wondering why you are having to deal with this: it was Microsoft's attempt to put DLL Hell in the developer's lap instead of the user's. They've since withdrawn this, VS2010 again makes it a user problem. That was a pretty big party in Bangalore, I'd imagine.
when i try to run a application developed in vc++ on windows7,i get popup window saying that"the program can not be started because MSVCR80D.dll is missing from your computer,try reinstalling the program to fix this issue."
I googled it,it says that this DDL may not be present in your system or it has been got corrupted,Now i searched this file, i get this file at 20 different folder in win7.
I am not getting which file has been corrupted or if it is missing then where it is mising?
can anybody tell in which folder ,this DDL is missing or might be corrupted?
Thanks in advance. .
You're trying to run a Debug version of your program on a machine which does not have VS installed. The MS*D.dll files are not redistributable - they are installed were VS is installed. If you want to run executables on other machines, compile them as Release. You might still need to deploy some files (depending on how you're linking to the CRT), but that won't be a problem.
Never ever distribute your DEBUG builds to customers. Always distribute Release build.
Yes, of course, in develoment environment having multiple machines, you may share Debug builds to other developers - provided others developers have debugging-tools (like VS) installed on their system along with Debug-binaries of shared DLLs (like MSVCRxx).
Are you using the same computer that compiled the program? If not, you need visual studio redistributable files to run it.
Search the internet for your version of visual studio or visual c++ redist, you'll find it.
I have installed the Netbeans 6.7 IDE with Java ME included, but cannot create a Mobile Application project from the Java ME category. When I select the project type the wizard stops at "Finding Feature" with the message:
Not all requested modules can be enabled:
[StandardModule:org.netbeans.modules.mobility.end2end.kig jarFile:C:\Program Files\NetBeans 6.7\mobility8\modules\org-netbeans-modules-mobility-end2end-kit.jar.
I am attempting to run this on Vista Home Premium. I have tried to run the IDE as Administrator with no luck.
I am at a loss for where to go next as I cannot seem to find any information regarding this issue. Even if you don't have the solution any insight into this error message would be helpful.
I am unable so far to get the project running via the Netbeans IDE install. I have, for the time being, installed the Java ME SDK which includes a very stripped down version of the Netbeans IDE for mobile development.
I originally had some issues starting the SDK as well on Vista. The IDE reported that it could not connect to the device manager on localhost. After some searching I found this link: Java ME SDK Startup Problem which suggests changing the hosts file localhost entry from IPv6 to IPv4. The fix worked perfectly and I can now compile and run code in the emulator.
This is not an optimal solution as the SDK does not include the visual design tools, however I am able to get a basic project going in the mean time.
I have given up on the 6.7 version and have instead located and installed 6.5.1. This previous version has been working just fine and seems to do everything I need.
I ran into the exact same error today while installing NB 6.8 beta. To resolve it we need to install two plugins:
Java Web Applications (as mentioned by Ali above) and
Sun Java System Web Server 7.0
Note that these two are part of the Category called "Java Web and EE" hence the confusion that we need to install Glassfish App Server. But we need these two plugins because they are required for debugging using breakpoints in emulator. Netbeans runs a web server when we do breakpoint based debugging.
Also note that the Java Web applications needs SOAP Web Services and JavaScript Debugger plugins to run and so these plugins are also installed when you try to install it.
You also need to install "Java Web Applications" plugin.
Tools->Plugins->Available Plugins
If the module is present, you should try unzipping it to check its content makes sense.
You should also be able to rebuild it from Netbeans sources.
You can also try to figure out why this happens by debugging the module loader inside Netbeans from its sources, using another IDE, presumably the latest version of Netbeans you can find without the issue.
If the module is missing, you might want to get the missing jar file from an installation of a previous version of Netbeans, see if it is compatible.
6.5.1 isn't missing any module.
back in version 5.5, the mobility module had to be downloaded and installed separately from the main IDE.
If you want to consider using Eclipse for developing your J2ME app...I've written a post related to that some time ago: here.
I am trying to deploy a Visual C++ application (developed with Microsoft Visual Studio 2008) using a Setup and Deployment Project. After installation, users on some target computers get the following error message after launching the application executable: “This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix the problem.” Another user after installation could run the application properly. I cannot find the root cause of this problem, despite spending several hours on the Visual Studio help files and online forums (most postings date back to 2006). Does anyone at Stack Overflow have a suggestion? Thanks in advance. Additional details appear below.
The application uses FLTK 1.1.9 for a GUI library, as well as some Boost 1.39 libraries (regex, lexical_cast, date_time, math).
I made sure I am trying to deploy the release version (not the debug version) of the application. The Runtime library in the Code Generation settings is Multi-threaded DLL (/MD).
The dependency walker of myapp.exe lists the following DLLs: wsock32.dll, comctl32.dll, kernel32.dll, user32.dll, gdi32.dll, shell32.dll, ole32.dll, mvcp90.dll, msvcr90.dll.
In the Setup and Deployment Project, I add the following DLLs to the File System on Target Machine: fltkdlld.dll, and a folder named Microsoft.VC90.CRT with msvcm90.dll, msvcp90.dll, mcvcr90.dll and Microsoft.VC90.CRT.manifest.
The installation process on the target computers getting the error message requires having the .Net Framework 3.5 installed first.
Any suggestion? Thanks in advance!
Add the Visual C++ Redistributable to your Deployment project and be sure to run Setup.exe instead of the MSI when installing. This will invoke the VCRedist bootstrapper to ensure your PC has those pieces before installing your app.
Dependency Walker only shows static (link time) dependencies - it cannot possibly know about dynamic dependencies such as COM objects.
I had a similar problem after the ATL security updates last year. My app needed a later version of the C++ runtime libraries than the deployment project included.
Try running Windows Update on the target machines after installation, or download and install the latest (28 July 2009) C++ redistributable package directly.
http://support.microsoft.com/?kbid=973551
That solved the problem for me. I haven't fixed the deployment project yet though.
This is the error Dependency Walker gives me on an executable that I am building with VC++ 2005 Express Edition. When trying to run the .exe, I get:
This application has failed to start because the application configuration
is incorrect. Reinstalling the application may fix this problem.
(I am new to the manifest/SxS/etc. way of doing things post VC++ 2003.)
EDIT:
I am running on the same machine I am building the .exe with. In Event Viewer, I have the unhelpful:
Faulting application blah.exe, version 0.0.0.0, faulting module blah.exe,
version 0.0.0.0, fault address 0x004239b0.
Open the properties sheet for your project, go to the Configuration Properties -> C/C++ -> Code Generation page, and change the Runtime Library selection to /MT or /MTd so that your project does not use the DLL runtime libraries.
The C/C++ DLL runtimes used by VS2003 and up are not automatically distributed with the latest version of the OS and are a real pain to install and get working without this kind of problem. statically link the c-runtime and just avoid the total mess that is manifests and version specific runtime dlls.
I've had this problem. The solution has two steps:
1. Compile your program in "Release" mode instead of "Debug" mode (there's usually a combo-box in the toolbar)
2. Download from Microsoft their Redistributable Package of runtime components. Make sure to download the x86 edition for 32-bit computers and the x64 edition for 64-bit computers/OSes. Install this package on the target computer, and your application should run fine
P.S. This is a SxS thing
P.P.S. Alternatively, use a different compiler (like GCC, for example with Dev-Cpp) to compile your program's source, and your headaches will disappear.
Sorry to bump an old question, but I was able to get around this exact issue and thought I'd post a solution in case someone else needs it...
Even after installing Microsoft's redistributable DLLs I was getting this error, the fix was to copy the
C:\Program Files\Microsoft Visual Studio 8\VC\redist\x86\Microsoft.VC80.CRT
folder into the application's directory on the target PC. After that, no more problems.
BTW, the DLL that was giving me issues was a 3rd-party DLL that had never had problems before on over 100 other computers... go figure.
Run Event Viewer: it'll have more information.
Probably you've attempted to run your program on a machine that doesn't have the VC redistributables installed, or you're attempting to run a debug build on a machine that doesn't have Visual Studio installed (the debug libraries aren't redistributable).
I have had the same issue with VS 2008-built debug binaries on other winxp sp3 machines.
I first tried installing the client machine with vc redist package,as it seemed sensible. Annoyingly, it didn't work.
I tried copying all the dependent dlls to the application's directory - still didn't work
After being struck over this issue for hours, I found that the latest VS builds require manifests and policies to link with the dlls. After copying them into their respective "C:\WINDOWS\WinSxS\" folders, I got it working.
The problem was caused due to the fact that the vc redist package did not install debug versions of dlls, they somehow thought its up to the programmer to figure out.