As the title says, how do two or more threads share memory on the heap that they have allocated? I've been thinking about it and I can't figure out how they can do it. Here is my understanding of the process, presumably I am wrong somewhere.
Any thread can add or remove a given number of bytes on the heap by making a system call which returns a pointer to this data, presumably by writing to a register which the thread can then copy to the stack.
So two threads A and B can allocate as much memory as they want. But I don't see how thread A could know where the memory that thread B has allocated is located. Nor do I know how either thread could know where the other thread's stack is located. Multi-threaded programs share the heap and, I believe, can access one another's stack but I can't figure out how.
I tried searching for this question but only found language specific versions that abstract away the details.
Edit:
I am trying not to be language or OS specific but I am using Linux and am looking at it from a low level perspective, assembly I guess.
My interpretation of your question: How can thread A get to know a pointer to the memory B is using? How can they exchange data?
Answer: They usually start with a common pointer to a common memory area. That allows them to exchange other data including pointers to other data with each other.
Example:
Main thread allocates some shared memory and stores its location in p
Main thread starts two worker threads, passing the pointer p to them
The workers can now use p and work on the data pointed to by p
And in a real language (C#) it looks like this:
//start function ThreadProc and pass someData to it
new Thread(ThreadProc).Start(someData)
Threads usually do not access each others stack. Everything starts from one pointer passed to the thread procedure.
Creating a thread is an OS function. It works like this:
The application calls the OS using the standard ABI/API
The OS allocates stack memory and internal data structures
The OS "forges" the first stack frame: It sets the instruction pointer to ThreadProc and "pushes" someData onto the stack. I say "forge" because this first stack frame does not arise naturally but is created by the OS artificially.
The OS schedules the thread. ThreadProc does not know it has been setup on a fresh stack. All it knows is that someData is at the usual stack position where it would expect it.
And that is how someData arrives in ThreadProc. This is the way the first, initial data item is shared. Steps 1-3 are executed synchronously by the parent thread. 4 happens on the child thread.
A really short answer from a bird's view (1000 miles above):
Threads are execution paths of the same process, and the heap actually belongs to the process (and as a result shared by the threads). Each threads just needs its own stack to function as a separate unit of work.
Threads can share memory on a heap if they both use the same heap. By default most languages/frameworks have a single default heap that code can use to allocate memory from the heap. In unmanaged languages you generally make explicit calls to allocate heap memory. In C, that might be malloc, etc. for example. In managed languages heap allocation is usually automatic and how allocation is done depends on the language--usually through the use of the new operator. but, that depends slightly on context. If you provide the OS or language context you're asking about, I might be able to provide more detail.
A Thread shared with other threads belonging to the same process: its code section, data section and other operating system resources such as open files and signals.
The part you are missing is static memory containing static variables.
This memory is allocated when the program is started, and assigned known adresses (determined at the linking time). All threads can access this memory without exchanging any data runtime, because the addresses are effectively hardcoded.
A simple example might look like this:
// Global variable.
std::atomic<int> common_var;
void thread1() {
common_var = compute_some_value();
}
void thread2() {
do_something();
int current_value = common_var;
do_more();
}
And of course the global value may be a pointer, that can be used to exchange heap memory. The producer allocates some objects, the consumer takes and uses them.
// Global variable.
std::atomic<bool> produced;
SomeData* data_pointer;
void producer_thread() {
while (true) {
if (!produced) {
SomeData* new_data = new SomeData();
data_pointer = new_data;
// Let the other thread know there is something to read.
produced = true;
}
}
}
void consumer_thread() {
while (true) {
if (produced) {
SomeData* my_data = data_pointer;
data_pointer = nullptr;
// Let the other thread know we took the data.
produced = false;
do_something_with(my_data);
delete my_data;
}
}
}
Please note: these are not examples of good concurrent code, but they show the general idea without too much clutter.
Related
The following implementation from Wikipedia:
volatile unsigned int produceCount = 0, consumeCount = 0;
TokenType buffer[BUFFER_SIZE];
void producer(void) {
while (1) {
while (produceCount - consumeCount == BUFFER_SIZE)
sched_yield(); // buffer is full
buffer[produceCount % BUFFER_SIZE] = produceToken();
// a memory_barrier should go here, see the explanation above
++produceCount;
}
}
void consumer(void) {
while (1) {
while (produceCount - consumeCount == 0)
sched_yield(); // buffer is empty
consumeToken(buffer[consumeCount % BUFFER_SIZE]);
// a memory_barrier should go here, the explanation above still applies
++consumeCount;
}
}
says that a memory barrier must be used between the line that accesses the buffer and the line that updates the Count variable.
This is done to prevent the CPU from reordering the instructions above the fence along-with that below it. The Count variable shouldn't be incremented before it is used to index into the buffer.
If a fence is not used, won't this kind of reordering violate the correctness of code? The CPU shouldn't perform increment of Count before it is used to index into buffer. Does the CPU not take care of data dependency while instruction reordering?
Thanks
If a fence is not used, won't this kind of reordering violate the correctness of code? The CPU shouldn't perform increment of Count before it is used to index into buffer. Does the CPU not take care of data dependency while instruction reordering?
Good question.
In c++, unless some form of memory barrier is used (atomic, mutex, etc), the compiler assumes that the code is single-threaded. In which case, the as-if rule says that the compiler may emit whatever code it likes, provided that the overall observable effect is 'as if' your code was executed sequentially.
As mentioned in the comments, volatile does not necessarily alter this, being merely an implementation-defined hint that the variable may change between accesses (this is not the same as being modified by another thread).
So if you write multi-threaded code without memory barriers, you get no guarantees that changes to a variable in one thread will even be observed by another thread, because as far as the compiler is concerned that other thread should not be touching the same memory, ever.
What you will actually observe is undefined behaviour.
It seems, that your question is "can incrementing Count and assigment to buffer be reordered without changing code behavior?".
Consider following code tansformation:
int count1 = produceCount++;
buffer[count1 % BUFFER_SIZE] = produceToken();
Notice that code behaves exactly as original one: one read from volatile variable, one write to volatile, read happens before write, state of program is the same. However, other threads will see different picture regarding order of produceCount increment and buffer modifications.
Both compiler and CPU can do that transformation without memory fences, so you need to force those two operations to be in correct order.
If a fence is not used, won't this kind of reordering violate the correctness of code?
Nope. Can you construct any portable code that can tell the difference?
The CPU shouldn't perform increment of Count before it is used to index into buffer. Does the CPU not take care of data dependency while instruction reordering?
Why shouldn't it? What would the payoff be for the costs incurred? Things like write combining and speculative fetching are huge optimizations and disabling them is a non-starter.
If you're thinking that volatile alone should do it, that's simply not true. The volatile keyword has no defined thread synchronization semantics in C or C++. It might happen to work on some platforms and it might happen not to work on others. In Java, volatile does have defined thread synchronization semantics, but they don't include providing ordering for accesses to non-volatiles.
However, memory barriers do have well-defined thread synchronization semantics. We need to make sure that no thread can see that data is available before it sees that data. And we need to make sure that a thread that marks data as able to be overwritten is not seen before the thread is finished with that data.
How does CAS works? How does it work with garbage collector? Where is the problem and how does it work without garbage collector?
I was reading a presentation about CAS and using it on "write rarely, read many" problem and there was said, that use of CAS is convenient while you can use garbage collector, but there is problem (not specified) while you can not use garbage collector.
Can you tell me something about this? If you can sum up principle of CAS at first, it would be appreciated.
Ok, so CAS is an atomic instruction, that is there is special hardware support for it.
Its main use is to not use locks at all when implementing your data structures and other operations, since using locks, if a thread takes a page fault, a cache miss or is being descheduled by the OS for instance the thread takes the lock with it and all the rest of the threads are blocked. This obviously yields serious performance issues.
CAS is the core of lock-free programming and here and here.
CAS basically is the following:
CAS(CURRENT_VALUE, OLD_VALUE, NEW_VALUE) <=>
if CURRENT_VALUE==OLD_VALUE then CURRENT_VALUE = NEW_VALUE
You have a variable (e.g. class variable) and you have no clue if it was modified or not by other threads in the time you read from it and you want to write to it.
CAS helps you here on the write part since this CAS is done atomically (in hardware) and no lock is being implemented there, thus even if your thread goes to sleep the rest of the threads can operate on your data structure.
The issue with CAS on non-GC systems is the ABA problem and an example is the following:
You have a single linked list: HEAD->A->X->Y->Z
Thread 1: let's read A: localA = A; localA_Value = A.Value (let's say 5)
Thread 2: let's delete A: HEAD->A->X->Y->Z
Thread 3: let's add a new node at start (the malloc will find the right spot right were old A was): HEAD->A'->X->Y->Z (A'.Value = 10)
Thread 1 resumes and wants to swap A with B: CAS(localA, A', B) => but this thread expects that if CAS passes the value of A to be 5; wrong: since CAS passes given that localA and A' have the same memory location but localA.Value!=A'.Value => thus the operation shouldn't be performed.
The thing is that in GC enabled systems this will never happen since localA holds a reference to that memory location and thus A' will never get allocated to that memory location.
Heap allocations are a bottleneck in my application and I would like to avoid them when sending small tasks to my thread pool.
Can I use a std::packaged_task with a stack allocator? Under which conditions? What are the pros/cons of this choice? Are there better alternatives to avoid heap allocations of std::future's shared state by operator new ?
auto foo() {
arena<1024> buffer;
auto task = std::packaged_task<int()>{
std::allocator_arg_t,
arena_allocator{arena},
[]() -> int { return 5; }
};
auto f = task.get_future(); // is this future and its shared state stack allocated?
thread_pool.push_back(std::move(task));
// I will probably need to block before the stack goes out of scope..
return f.get();
}
Your "I will probably need to block before the stack goes out of scope" comment clearly identifies the only issue here. The only thing you must make sure is that because the task in your sending thread's stack, it has to stay there until your thread pool executes it.
Other than that, there are no issues with using the stack, instead of heap allocation.
I'm having trouble figuring out a key point in wait-free algorithm design. Suppose a data structure has a pointer to another data structure (e.g. linked list, tree, etc), how can the right time for releasing a data structure?
The problem is this, there are separate operations that can't be executed atomically without a lock. For example one thread reads the pointer to some memory, and increments the use count for that memory to prevent free while this thread is using the data, which might take long, and even if it doesn't, it's a race condition. What prevents another thread from reading the pointer, decrementing the use count and determining that it's no longer used and freeing it before the first thread incremented the use count?
The main issue is that current CPUs only have a single word CAS (compare & swap). Alternatively the problem is that I'm clueless about waitfree algorithms and data structures and after reading some papers I'm still not seeing the light.
IMHO Garbage collection can't be the answer, because it would either GC would have to be prevented from running if any single thread is inside an atomic block (which would mean it can't be guaranteed that the GC will ever run again) or the problem is simply pushed to the GC, in which case, please explain how the GC would figure out if the data is in the silly state (a pointer is read [e.g. stored in a local variable] but the the use count didn't increment yet).
PS, references to advanced tutorials on wait-free algorithms for morons are welcome.
Edit: You should assume that the problem is being solved in a non-managed language, like C or C++. After all if it were Java, we'd have no need to worry about releasing memory. Further assume that the compiler may generate code that will store temporary references to objects in registers (invisible to other threads) right before the usage counter increment, and that a thread can be interrupted between loading the object address and incrementing the counter. This of course doesn't mean that the solution must be limited to C or C++, rather that the solution should give a set of primitives that allowing the implementation of wait-free algorithms on linked data structures. I'm interested in the primitives and how they solve the problem of designing wait-free algorithms. With such primitives a wait-free algorithm can be implemented equally well in C++ and Java.
After some research I learned this.
The problem is not trivial to solve and there are several solutions each with advantages and disadvantages. The reason for the complexity comes from inter CPU synchronization issues. If not done right it might appear to work correctly 99.9% of the time, which isn't enough, or it might fail under load.
Three solutions that I found are 1) hazard pointers, 2) quiescence period based reclamation (used by the Linux kernel in the RCU implementation) 3) reference counting techniques. 4) Other 5) Combinations
Hazard pointers work by saving the currently active references in a well-known per thread location, so any thread deciding to free memory (when the counter appears to be zero) can check if the memory is still in use by anyone. An interesting improvement is to buffer request to release memory in a small array and free them up in a batch when the array is full. The advantage of using hazard pointers is that it can actually guarantee an upper bound on unreclaimed memory. The disadvantage is that it places extra burden on the reader.
Quiescence period based reclamation works by delaying the actual release of the memory until it's known that each thread has had a chance to finish working on any data that may need to be released. The way to know that this condition is satisfied is to check if each thread passed through a quiescent period (not in a critical section) after the object was removed. In the Linux kernel this means something like each task making a voluntary task switch. In a user space application it would be the end of a critical section. This can be achieved by a simple counter, each time the counter is even the thread is not in a critical section (reading shared data), each time the counter is odd the thread is inside a critical section, to move from a critical section or back all the thread needs to do is to atomically increment the number. Based on this the "garbage collector" can determine if each thread has had a chance to finish. There are several approaches, one simple one would be to queue up the requests to free memory (e.g. in a linked list or an array), each with the current generation (managed by the GC), when the GC runs it checks the state of the threads (their state counters) to see if each passed to the next generation (their counter is higher than the last time or is the same and even), any memory can be reclaimed one generation after it was freed. The advantage of this approach is that is places the least burden on the reading threads. The disadvantage is that it can't guarantee an upper bound for the memory waiting to be released (e.g. one thread spending 5 minutes in a critical section, while the data keeps changing and memory isn't released), but in practice it works out all right.
There is a number of reference counting solutions, many of them require double compare and swap, which some CPUs don't support, so can't be relied upon. The key problem remains though, taking a reference before updating the counter. I didn't find enough information to explain how this can be done simply and reliably though. So .....
There are of course a number of "Other" solutions, it's a very important topic of research with tons of papers out there. I didn't examine all of them. I only need one.
And of course the various approaches can be combined, for example hazard pointers can solve the problems of reference counting. But there's a nearly infinite number of combinations, and in some cases a spin lock might theoretically break wait-freedom, but doesn't hurt performance in practice. Somewhat like another tidbit I found in my research, it's theoretically not possible to implement wait-free algorithms using compare-and-swap, that's because in theory (purely in theory) a CAS based update might keep failing for non-deterministic excessive times (imagine a million threads on a million cores each trying to increment and decrement the same counter using CAS). In reality however it rarely fails more than a few times (I suspect it's because the CPUs spend more clocks away from CAS than there are CPUs, but I think if the algorithm returned to the same CAS on the same location every 50 clocks and there were 64 cores there could be a chance of a major problem, then again, who knows, I don't have a hundred core machine to try this). Another results of my research is that designing and implementing wait-free algorithms and data-structures is VERY challenging (even if some of the heavy lifting is outsourced, e.g. to a garbage collector [e.g. Java]), and might perform less well than a similar algorithm with carefully placed locks.
So, yeah, it's possible to free memory even without delays. It's just tricky. And if you forget to make the right operations atomic, or to place the right memory barrier, oh, well, you're toast. :-) Thanks everyone for participating.
I think atomic operations for increment/decrement and compare-and-swap would solve this problem.
Idea:
All resources have a counter which is modified with atomic operations. The counter is initially zero.
Before using a resource: "Acquire" it by atomically incrementing its counter. The resource can be used if and only if the incremented value is greater than zero.
After using a resource: "Release" it by atomically decrementing its counter. The resource should be disposed/freed if and only if the decremented value is equal to zero.
Before disposing: Atomically compare-and-swap the counter value with the minimum (negative) value. Dispose will not happen if a concurrent thread "Acquired" the resource in between.
You haven't specified a language for your question. Here goes an example in c#:
class MyResource
{
// Counter is initially zero. Resource will not be disposed until it has
// been acquired and released.
private int _counter;
public bool Acquire()
{
// Atomically increment counter.
int c = Interlocked.Increment(ref _counter);
// Resource is available if the resulting value is greater than zero.
return c > 0;
}
public bool Release()
{
// Atomically decrement counter.
int c = Interlocked.Decrement(ref _counter);
// We should never reach a negative value
Debug.Assert(c >= 0, "Resource was released without being acquired");
// Dispose when we reach zero
if (c == 0)
{
// Mark as disposed by setting counter its minimum value.
// Only do this if the counter remain at zero. Atomic compare-and-swap operation.
if (Interlocked.CompareExchange(ref _counter, int.MinValue, c) == c)
{
// TODO: Run dispose code (free stuff)
return true; // tell caller that resource is disposed
}
}
return false; // released but still in use
}
}
Usage:
// "r" is an instance of MyResource
bool acquired = false;
try
{
if (acquired = r.Acquire())
{
// TODO: Use resource
}
}
finally
{
if (acquired)
{
if (r.Release())
{
// Resource was disposed.
// TODO: Nullify variable or similar to let GC collect it.
}
}
}
I know this is not the best way but it works for me:
for shared dynamic data-structure lists I use usage counter per item
for example:
struct _data
{
DWORD usage;
bool delete;
// here add your data
_data() { usage=0; deleted=true; }
};
const int MAX = 1024;
_data data[MAX];
now when item is started to be used somwhere then
// start use of data[i]
data[i].cnt++;
after is no longer used then
// stop use of data[i]
data[i].cnt--;
if you want to add new item to list then
// add item
for (i=0;i<MAX;i++) // find first deleted item
if (data[i].deleted)
{
data[i].deleted=false;
data[i].cnt=0;
// copy/set your data
break;
}
and now in the background once in a while (on timer or whatever)
scann data[] an all undeleted items with cnt == 0 set as deleted (+ free its dynamic memory if it has any)
[Note]
to avoid multi-thread access problems implement single global lock per data list
and program it so you cannot scann data while any data[i].cnt is changing
one bool and one DWORD suffice for this if you do not want to use OS locks
// globals
bool data_cnt_locked=false;
DWORD data_cnt=0;
now any change of data[i].cnt modify like this:
// start use of data[i]
while (data_cnt_locked) Sleep(1);
data_cnt++;
data[i].cnt++;
data_cnt--;
and modify delete scan like this
while (data_cnt) Sleep(1);
data_cnt_locked=true;
Sleep(1);
if (data_cnt==0) // just to be sure
for (i=0;i<MAX;i++) // here scan for items to delete ...
if (!data[i].cnt)
if (!data[i].deleted)
{
data[i].deleted=true;
data[i].cnt=0;
// release your dynamic data ...
}
data_cnt_locked=false;
PS.
do not forget to play with the sleep times a little to suite your needs
lock free algorithm sleep times are sometimes dependent on OS task/scheduler
this is not really an lock free implementation
because while GC is at work then all is locked
but if ather than that multi access is not blocking to each other
so if you do not run GC too often you are fine
I have a single-threaded linux app which I would like to make parallel. It reads a data file, creates objects, and places them in a vector. Then it calls a compute-intensive method (.5 second+) on each object. I want to call the method in parallel with object creation. While I've looked at qt and tbb, I am open to other options.
I planned to start the thread(s) while the vector was empty. Each one would call makeSolids (below), which has a while loop that would run until interpDone==true and all objects in the vector have been processed. However, I'm a n00b when it comes to threading, and I've been looking for a ready-made solution.
QtConcurrent::map(Iter begin,Iter end,function()) looks very easy, but I can't use it on a vector that's changing in size, can I? And how would I tell it to wait for more data?
I also looked at intel's tbb, but it looked like my main thread would halt if I used parallel_for or parallel_while. That stinks, since their memory manager was recommended (open cascade's mmgt has poor performance when multithreaded).
/**intended to be called by a thread
\param start the first item to get from the vector
\param skip how many to skip over (4 for 4 threads)
*/
void g2m::makeSolids(uint start, uint incr) {
uint curr = start;
while ((!interpDone) || (lineVector.size() > curr)) {
if (lineVector.size() > curr) {
if (lineVector[curr]->isMotion()) {
((canonMotion*)lineVector[curr])->setSolidMode(SWEPT);
((canonMotion*)lineVector[curr])->computeSolid();
}
lineVector[curr]->setDispMode(BEST);
lineVector[curr]->display();
curr += incr;
} else {
uio::sleep(); //wait a little bit for interp
}
}
}
EDIT: To summarize, what's the simplest way to process a vector at the same time that the main thread is populating the vector?
Firstly, to benefit from threading you need to find similarly slow tasks for each thread to do. You said your per-object processing takes .5s+, how long does your file reading / object creation take? It could easily be a tenth or a thousandth of that time, in which case your multithreading approach is going to produce neglegible benefit. If that's the case, (yes, I'll answer your original question soon incase it's not) then think about simultaneously processing multiple objects. Given your processing takes quite a while, the thread creation overhead isn't terribly significant, so you could simply have your main file reading/object creation thread spawn a new thread and direct it at the newly created object. The main thread then continues reading/creating subsequent objects. Once all objects are read/created, and all the processing threads launched, the main thread "joins" (waits for) the worker threads. If this will create too many threads (thousands), then put a limit on how far ahead the main thread is allowed to get: it might read/create 10 objects then join 5, then read/create 10, join 10, read/create 10, join 10 etc. until finished.
Now, if you really want the read/create to be in parallel with the processing, but the processing to be serialised, then you can still use the above approach but join after each object. That's kind of weird if you're designing this with only this approach in mind, but good because you can easily experiment with the object processing parallelism above as well.
Alternatively, you can use a more complex approach that just involves the main thread (that the OS creates when your program starts), and a single worker thread that the main thread must start. They should be coordinated using a mutex (a variable ensuring mutually-exclusive, which means not-concurrent, access to data), and a condition variable which allows the worker thread to efficiently block until the main thread has provided more work. The terms - mutex and condition variable - are the standard terms in the POSIX threading that Linux uses, so should be used in the explanation of the particular libraries you're interested in. Summarily, the worker thread waits until the main read/create thread broadcasts it a wake-up signal indicating another object is ready for processing. You may want to have a counter with index of the last fully created, ready-for-processing object, so the worker thread can maintain it's count of processed objects and move along the ready ones before once again checking the condition variable.
It's hard to tell if you have been thinking about this problem deeply and there is more than you are letting on, or if you are just over thinking it, or if you are just wary of threading.
Reading the file and creating the objects is fast; the one method is slow. The dependency is each consecutive ctor depends on the outcome of the previous ctor - a little odd - but otherwise there are no data integrity issues so there doesn't seem to be anything that needs to be protected by mutexes and such.
Why is this more complicated than something like this (in crude pseudo-code):
while (! eof)
{
readfile;
object O(data);
push_back(O);
pthread_create(...., O, makeSolid);
}
while(x < vector.size())
{
pthread_join();
x++;
}
If you don't want to loop on the joins in your main then spawn off a thread to wait on them by passing a vector of TIDs.
If the number of created objects/threads is insane, use a thread pool. Or put a counter is the creation loop to limit the number of threads that can be created before running ones are joined.
#Caleb: quite -- perhaps I should have emphasized active threads. The GUI thread should always be considered one.