In the list, I set-up "ID" column and "Title" column.
I added 10 items in the list, and I'm trying to put the 10th item between 1 and 2.
After my research, many people said I can't manually change ID number...
Is there a way to re-order the item?
deleting every items is the only answer?
Please help!
The ID column is an internal identity-like column. You cannot change the value. If you need a column that you can order by (and change), just create a new column called SortOrder or something. Then sort by that column.
I know this is an old post, but I thought this might help someone who might be looking for an OOB answer.
Go into your links list so that you see your List Tools, Items and List at the top.
Select Items.
There is a Change Item Order Icon in the Ribbon. This will allow you to renumber the Links in your list and change the order.
You can manually change the items order if you create your list based on a link list definition. This kind of list allows you to re-order items as you require through a ribbon button. I use this workaround often.
The ID Column is SharePoint inbuilt and you can not change the value of it.
for your solution either you need to delete all item and insert it again or as #Nigel Whatling say you have to add SortColumn
Column Setting will only change the order in the SharePoint List. To change the view order Use the Modify View Selector to adjust the way the fields are sorted. Modify View is found on the ... next to Find and Item Box or If your in the site setting it is under View on the lower 3rd of the page
I also got stuck with this and couldn't use the previous answers as I couldn't see the buttons they spoke of in the ribbon.
I went to List > List Settings in the ribbon. At the bottom of the list settings page I click on a View to edit it (or create new view). Unser the heading Sort you can change the column you wish to sort by and change from descending to ascending etc.
Actually, if I understand the question, it was just what I was trying to accomplish and spent most of my morning working on.
Select the List.
From toolbar, select List under List Tools.
Click List Settings.
Below the listed columns, see Column Ordering
Modify "Position from Top" number and click OK at bottom.
Updated steps:
Select the List.
From toolbar, select List under List Tools.
Click List Settings.
Above the Column list click on the "Item" link
At the bottom of the page select "Column Ordering"
Modify "Position from Top" number and click OK at bottom.
Related
I need to add a checkbox field to the item sublist of a purchase order, can someone tell me how to do this? I can't seem to find any definitive information on how this works.
thanks in advance for any help
OK, got it. You go to the form that you are modifying (in this case) Purchase Orders. You go to the customize menu in the right upper corner, you select "New Column Field" and fill out the relevant type information. Then go to customize form, for the form you are going to use. Go to the screen fields tab, select the columns sub-tab and drag the column to it's new location. That's it
Happy Hunting
I have a Requirement Where a bundle of Items needs to be displayed in the Drop-Down List. The Problem for me is, because there are so many Items inside it, I need to Use Combobox over List-Box. The Reason for that is, if I know the name of the item, I can type in the search box of the drop-down and get my Item, Combo-Box allows you to do that. But the List Box doesn't allow the User Input.
Now, Because there are some which names cannot be remembered, I need to use the Scroll bar in the drop-down to pick up the time. This is hectic, to select a single Item. I would like to have the facility of Using a Multi-select in this case.
So the Requirements are below:
1) A Drop-Down that allows the user to type in part of the Input(Say Ref for Refreigerator)
2) A Drop-Down that allows the Multi-select.
Obviously, I don't want to have two drop-downs Splitting the data.
I am open to other Suggestions.
Please Share your thoughts.
I have a question for you bright minded souls. I have an Infopath form for a Sharepoint List (meaning that this is considered an Infopath List Form) that I would like certain behavior for... and I'm not quite sure how to achieve it.
The gist is, I have two dropdowns on the form and I want the second dropdown to change its values based on the first dropdowns selection.
Both are pointing at the same list. The list looks like so:
ID, ModuleName, SystemName, PayCode, LineOfBusoness
1, Mod1, Sys1, O, LOB1
2, Mod2, Sys2, O, LOB2
3, Mod3, Sys3, C, LOB3
4, Mod3, Sys4, O, LOB3
The first dropdown contains just the paycodes, so basically "O", and "C".
Now the second dropdown is where it gets tricky.
The second drop down is to display all the Lines of Business (LOB) from that list based on the PayCode selected in the previous dropdown. If they select "O" then just display all the LOBs that has the paycode of "O".
BUT... if they select "C"... well then there are also dropdowns on the form where they have already selected System and Module... so it would then take those values that were selected and choose the value in the list that has the System they chose, the Module they chose, and the Paycode they chose.
How can I do that? My first thought was well, just use code... but it turns out Infopath does not allow custom code on a "list form" which this is... wtf? So then the next option is to use the "cascading dropdown" approach whereby you can also use rules and filters to try and achieve this behavior.
Can that be done? What are your thoughts as to how you would tackle this problem?
Thanks in advance, and please let me know if you need additional information!
One way to do this is in the code behind.
Take the first drop down, find the field it is associated with, right click and create a "Changed" event.
In the code behind event, a Changed event will be created for that field. There you can grab the value of the currently selected item of the first drop down. Depending on that value, you can then modify the contents of the second drop down.
Do this by grabbing the original list, and running an SPQuery that selects all the items that have a "O" or "C" or whatever selected value is. You can also run a linq or foreach statement on all the list's items, whichever you prefer :)
Note: Make sure the drop down list control properties has "Always" selected in the Browser Forms tab of the properties (right click on the drop down list to access these properties)
Hope this helps!
Can any one tell me that, Is is possible in wss to have our custom column in a view of list. The way how we are adding edit and delete column in asp.net grid by setting autogenerateedit button property to true. I have to write my custom login on click event of that button. This action is going to be common for all list items.
Thanks
Sachin K
I am afraid that it is not possible out of the Box in SharePoint (WSS / MOSS). If you want to have such an option, you might need to create a Separate page that will have code to do the opertion. Try out the SPGridView and SPDataSource.
Else I would suggest (Recommend) you to have a look at the DataSheetView option provided by the List, it will list List item details as all editable format, like Excel sheet.
There was a similar question asked but it wasn't exactly what I am trying to do.
Here is a link to the question: Auto Number Column in SharePoint List with Link to Item
Two solutons were offered to that question.
Could either of these solutions work for an imported list I have where Sharepoint has decided which column links to the item with edit menu? I want to change which column does this as I need to change the format and this means removing the column that has defaulted to being the link to item with edit menu.
You cannot dynamically change the menu column OOTB in SharePoint. To "move" the menu to a different column, you should create a new computed column and wrap the rendering (DisplayPattern) with the _EditMenuTableStart and _EditMenuTableEnd fields.
To see an example of how to do this, take a look at the "AddMenuColumn" PowerShell script from the iLoveSharePoint project on CodePlex. The script is pretty straightforward, so you should be able to translate it into code if you need that (or add declarative using features).
You could also just use the script as it is, to add the new menu column to your list.