I want to install ridgerun sdk to build and run applications on Leopardboard DM365. I am new to this and I have followed steps as per ridgerun sdk getting started guide - https://www.ridgerun.com/developer/wiki/index.php/DM365_Leopard_SDK_2011Q2_Getting_Started_Guide
I have installed the sdk as per the guide. Then as per the guide I configure the sdk to build it - "make configure". In the configuration I selected support for opencv-2.1.0. Then when I "make" the sdk, I get the following error:
Checking dependencies for OpenCV-2.1.0
Compiling and installing OpenCV-2.1.0...
Traceback (most recent call last):
File "<string>", line 1, in <module>
ImportError: No module named numpy.distutils
CMake Warning: The variable, 'BUILD_DOXYGEN_DOCS', specified manually, was not used during the generation.
CMake Warning: The variable, 'BUILD_PYTHON_SUPPORT', specified manually, was not used during the generation.
CMake Warning: The variable, 'CMAKE_TOOLCHAIN_FILE', specified manually, was not used during the generation.
make[3]: *** [cmake_built] Error 2
Error building OpenCV-2.1.0
make[2]: *** [dependency_build] Error 1
make[1]: *** [apps_build] Error 1
make: *** [fs_build] Error 2
I am stuck up at this point. I searched a lot but cannot find anything. Please guide me as to what has to be done.
Thanks,
Maz
You must disable OpenCV and compile again.
Goto the root directory of your RRSDK and run:
make config
goto "File System Configuration --->Select target's file system software"
Deselect "OpenCV".
Exit and run:
make
make install
OpenCV is known to have a bug in configuration in this version of RRSDK.
Related
I am trying to build the libgfortran_6.2.bb recipe in Morty.
I have included in my local.conf:
FORTRAN_forcevariable = ",fortran"
RUNTIMETARGET_append_pn-gcc-runtime = " libquadmath libgfortran"
IMAGE_INSTALL_append = " gfortran gfortran-symlinks libgfortran libgfortran-dev"
But I get the error:
../../../../../../../../work-shared/gcc-linaro-6.3-r2017.02/git/libgfortran/runtime/backtrace.c:37:33: fatal error: backtrace-supported.h: No such file or directory compilation terminated.
Makefile:2419: recipe for target 'backtrace.lo' failed make[1]: *** [backtrace.lo] Error 1
How can this be solved?
Unfortunately the fortran support in OE was broken for quite some time. This patch series brought in the needed fixes, but did not arrive before the rocko release development cycle. The series looks simple enough to be backported for your specific needs if desired, otherwise check if you can just forward your project to rocko.
I have been working through the LLVM Kaleidoscope Tutorial for OCaml. On the third part of the tutorial, I have navigated to the example code in the folder
OCaml-Kaleidoscope\Chapter3
I am encountering an issue when compiling with
ocamlbuild toy.byte
on cygwin. This is the code given in the tutorial to compile.
The error I am getting is
''ocamlc.opt -c -o codegen.cmo codegen.ml
File "codegen.ml", line 5, characters 5-9:
Error: Unbound module Llvm
Exit code 2 while executing this command:
''ocamlc.opt -c -o codegen.cmo codegen.ml
I looked up some solutions to this issue. One solution I found was to use
ocamlbuild -use-ocamlfind toy.byte -package llvm
instead of
ocamlbuild toy.byte
However, when I tried that I received this error:
Failure: ocamlfind not found on path, but -no-ocamlfind not used.
To fix this I tried:
opam install ocamlfind
But ocamlfind is already installed.
Another solution I found was to use:
opam install llvm
This resulted in:
The following actions will be performed:
- install llvm 3.7
=-=- Gathering sources =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
=-=- Processing actions -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
[llvm: ./install.sh 3.7] Command started
[ERROR] The installation of llvm failed at "./install.sh 3.7 make
C:\\cygwin64\\home\\setup\\.opam\\system
C:\\cygwin64\\home\\setup\\.opam\\system\\lib".
[llvm: ocamlfind remove] Command started
#=== ERROR while installing llvm.3.7 ==========================================#
# opam-version 1.3.0~dev2 (d4f7e01216dbb44af4e7cc6539a1b0afa9be9d2c)
# os win32
# command bash -c ./install.sh 3.7 make C:/cygwin64/home/setup/.opa m/system C:/cygwin64/home/setup/.opam/system/lib
# path C:\cygwin64\home\setup\.opam\system\build\llvm.3.7
# exit-code 2
# env-file C:\cygwin64\home\setup\.opam\system\build\llvm.3.7\llvm-1 0768-58c514.env
# stdout-file C:\cygwin64\home\setup\.opam\system\build\llvm.3.7\llvm-1 0768-58c514.out
# stderr-file C:\cygwin64\home\setup\.opam\system\build\llvm.3.7\llvm-1 0768-58c514.err
### stdout ###
# [...]
# config.status: executing bindings/ocaml/Makefile.ocaml commands
# make: Entering directory '/home/setup/.opam/system/build/llvm.3.7/build/bindin gs'
# llvm[0]: Constructing LLVMBuild project information.
# make[1]: Entering directory '/home/setup/.opam/system/build/llvm.3.7/build/bin dings/ocaml'
# make[2]: Entering directory '/home/setup/.opam/system/build/llvm.3.7/build/bin dings/ocaml/llvm'
# llvm[2]: Compiling llvm_ocaml.c for Release+Asserts build
# /home/setup/.opam/system/build/llvm.3.7/Makefile.rules:1536: recipe for target '/home/setup/.opam/system/build/llvm.3.7/build/bindings/ocaml/llvm/Release+Asse rts/llvm_ocaml.o' failed
# make[2]: Leaving directory '/home/setup/.opam/system/build/llvm.3.7/build/bind ings/ocaml/llvm'
# /home/setup/.opam/system/build/llvm.3.7/Makefile.rules:880: recipe for target 'all' failed
# make[1]: Leaving directory '/home/setup/.opam/system/build/llvm.3.7/build/bind ings/ocaml'
# /home/setup/.opam/system/build/llvm.3.7/Makefile.rules:939: recipe for target 'ocaml/.makeall' failed
# make: Leaving directory '/home/setup/.opam/system/build/llvm.3.7/build/binding s'
### stderr ###
# [...]
# configure: WARNING: dlopen() not found - disabling plugin support
# configure: WARNING: mmap() of a fixed address required but not supported
# configure: WARNING: mmap() of files required but not found
# configure: WARNING: --enable-bindings=ocaml specified, but OUnit 2 is not inst alled. Tests will not run
# + make -C bindings all SYSTEM_LLVM_CONFIG=llvm-config
# gcc.exe: error: /home/setup/.opam/system/build/llvm.3.7/bindings/ocaml/llvm/ll vm_ocaml.c: No such file or directory
# gcc.exe: fatal error: no input files
# compilation terminated.
# /usr/bin/rm: cannot remove '/home/setup/.opam/system/build/llvm.3.7/build/bind ings/ocaml/llvm/Release+Asserts/llvm_ocaml.d.tmp': No such file or directory
# make[2]: *** [/home/setup/.opam/system/build/llvm.3.7/build/bindings/ocaml/llv m/Release+Asserts/llvm_ocaml.o] Error 1
# make[1]: *** [all] Error 1
# make: *** [ocaml/.makeall] Error 2
=-=- Error report -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
The following actions failed
- install llvm 3.7
No changes have been performed
=-=- llvm.3.7 troubleshooting -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
=> This package relies on external (system) dependencies that may be missing.
`opam depext llvm.3.7' may help you find the correct installation for your
system.
I am using version 3.8.0 of llvm and version 4.02.3 of OCaml from this link.
Am I on the right track? What do I need to do to fix this?
As I have answered in your question LLVM tutorial OCaml Compilation Assembler Error, your best way is not to use Windows.
OPAM is now usable in Cygwin OCaml or even in MinGW OCaml (using Cygwin opam binary) but packages in the OPAM repository are not tested in these environments. Just avoid them unless you are experienced with OCaml program development in Windows.
If you stick to Windows, then check the build at C:\cygwin64\home\setup\.opam\system\build\llvm.3.7. There should be stdout and stderr log files which can help to understand what happend.
I am trying to compile QT 5.5.1 on Amazon AMI 2015.09, which looks la lot like Centos 6.5.
I keep getting this error:
Project ERROR: Unknown module(s) in QT: quick
However, there is no quick module that I can find, and no obvious way to enable to disable it from looking at the ./configure script.
My procedure:
I downloaded qt-everywhere-opensource-src-5.5.1.tar.gz
I unpacked it.
I ran ./configure
Confirmed that I want the opensource license and agreed to the LGPL.
Ran gmake -j4 (but I get the same behavior with gmake.
Interestingly, make distclean gives me this error:
Project ERROR: Unknown module(s) in QT: quick-private
Here are all of the errors sent to STDERR:
Checking for openal... Checking for bluez... no
Checking for bluez_le... no
Checking for btapi10_2_1... no
/home/ec2-user/qt-everywhere-opensource-src-5.5.1/qtmultimedia/qtmultimedia.pro:28: Variable GST_VERSION is not defined.
Checking for resourcepolicy... no
Checking for gpu_vivante... no
Checking for libbb2... no
no
Project MESSAGE: Unsupported Bluetooth platform, will not build a working QtBluetooth library.
Project MESSAGE: Either no Qt D-Bus found or no BlueZ headers.
qbluetoothdevicediscoveryagent_p.h:0: Note: No relevant classes found. No output generated.
qbluetoothservicediscoveryagent_p.h:0: Note: No relevant classes found. No output generated.
qbluetoothserver_p.h:0: Note: No relevant classes found. No output generated.
qbluetoothlocaldevice_p.h:0: Note: No relevant classes found. No output generated.
Checking for assimp... no
Project ERROR: Unknown module(s) in QT: quick
gmake[4]: *** [sub-textureandlight-make_first] Error 3
gmake[3]: *** [sub-canvas3d-make_first] Error 2
gmake[2]: *** [sub-canvas3d-make_first] Error 2
gmake[1]: *** [sub-examples-make_first] Error 2
gmake: *** [module-qtcanvas3d-make_first] Error 2
gmake: *** Waiting for unfinished jobs....
At another poster's suggestion I tried ./configure -skip qtquick but that didn't work:
$ ./configure -skip qtquick
+ cd qtbase
+ /home/ec2-user/qt-everywhere-opensource-src-5.5.1/qtbase/configure -top-level -skip qtquick
Attempting to skip non-existent module qtquick.
$
this is what I think will solve your problems:
You have use `make confclean' instead of making distclean for deleting the previous configuration.
Configure in verbose mode — more information will be provided, sorry, I don't remember exact flag, if I'm not mistaken, it's -v.
If you don't need quick, add -skip qtquick to the configure.
I want to install octaviz package in octave software.
From the documentation there is stated:
-You'll need octave 2.1.53 or later and VTK CVS to build octaviz. To compile octaviz, run ccmake . in the root directory of the source tree, then make and finally make install.
I first ran ccmake ., and it completed successfully after I installed some libs that I was missing.
But, the I ran "make" and it exits with the following errors:
>> make
[ 1%] Built target vtkWrapOctave
[ 1%] Building CXX object Common/CMakeFiles/octaviz.dir/octaviz.o
/home/user12345/octave/octaviz/Common/octaviz.cc:31:24: fatal error: octave/oct.h: No such file or directory
#include <octave/oct.h>
^
compilation terminated.
make[2]: *** [Common/CMakeFiles/octaviz.dir/octaviz.o] Error 1
make[1]: *** [Common/CMakeFiles/octaviz.dir/all] Error 2
make: *** [all] Error 2
Any idea what I am missing here?
You are missing the octave/oct.h header. This usually means that you don't have Octave installed. If you do have it installed, maybe you are missing the header files and shared libraries (if you are using Linux, did you install octave's -dev or -devel packaqes?) If you have them installed, you must have ran the configure script incorrectly. Either specify the correct options or set the CXX_FLAGS. If you don't know about compiler flags you probably should not change them and instead figure out how to install the octave libraries correctly.
I've been having issues with compiling pjsip for iOS 4.0.
I am using the latest trunk version from SVN and keep getting a portaudio error. When using the piedmontwireless guide: http://www.piemontewireless.net/PJSip155_and_iPhoneSDK312 I get a missing separator error in my build.mak file, which would indicate a whitespace/tabbing error, but for the life of me I cannot find it.
According to the pjsip mailing lists, you should be able to compile out of the box for iOS 4.0, but I get this error:
../src/pjmedia-audiodev/errno.c:23:26: error: portaudio.h: No such file or directory
../src/pjmedia-audiodev/errno.c: In function ‘pjmedia_audiodev_strerror’:
../src/pjmedia-audiodev/errno.c:104: warning: implicit declaration of function ‘Pa_GetErrorText’
make[2]: *** [output/pjmedia-audiodev-arm-apple-darwin9/errno.o] Error 1
make[1]: *** [pjmedia-audiodev] Error 2
I'll keep punching through this but any help would be really appreciated.
EDIT: I do have portaudio.h
The specific step you are missing is to have a config_site.h file in the proper location.
pjlib/include/pj/config_site.h
It needs to contain the following:
#define PJ_CONFIG_IPHONE 1
#include <pj/config_site_sample.h>
So the configuration will avoid libraries that are not needed or won't compile for the arm chip in the iPhone.
After this addition start over with:
./configure-iphone
and then
make dep && make clean && make
./configure-iphone
Fresh from SVN
Configurations for current target have been written to 'build.mak', and 'os-auto.mak' in various build directories, and pjlib/include/pj/compat/os_auto.h.
Further customizations can be put in:
- 'user.mak'
- 'pjlib/include/pj/config_site.h'
The next step now is to run 'make dep' and 'make'.
Done configuring for iPhoneOS4.2.sdk
Shouldn't ./configure-iphone setup pjlib/include/pj/config_site.h
As
#define PJ_CONFIG_IPHONE 1
#include <pj/config_site_sample.h>
Thanks for the fix #Schroedinger