I recently resinstalled Windows 7 on my machine and went back to downloading and installing the tools to help me continue developing node.js windows azure web applications. I followed the instructions given on the node.js azure site:
http://www.windowsazure.com/en-us/develop/nodejs/
and using web installer 4.0 it says I have successfully installed these tools:
Windows Azure Powershell
Windows Azure SDK for Node.js - June 2012
Windows Azure SDK for .Net (VS 2012 RC) - June 2012
IIS Recommend Configuration
The problem I am experiencing is that when I run the site using powershell e.g:
start-azureemulator -launch
it goes ahead and runs IIS Express, and after several minutes IIS Express crashes with the following information:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iisexpress.exe
Application Version: 8.0.8298.0
Application Timestamp: 4f620349
Fault Module Name: iiscore.dll
Fault Module Version: 8.0.8298.0
Fault Module Timestamp: 4f63b65c
Exception Code: c0000005
Exception Offset: 00021767
OS Version: 6.1.7601.2.1.0.256.28
Locale ID: 1033
Additional Information 1: f66d
Additional Information 2: f66d807b515d6b2dc6f28f66db769a01
Additional Information 3: 7b2f
Additional Information 4: 7b2f6797d07ebc2c23f2b227e779722e
I am running 2 instances each time, and both of them crash one after the other. Is anyone experiencing something similar and fix this issue ? Is their an upgrade I need to do ? I've run windows update but it says I've got all the latest updates etc.
Can I tell the powershell cmdlet to use IIS 7 instead of IIS Express? I'm guessing its something to do with IIS Express on my machine.
I did some hunting around and found this person here who experienced a similar problem:
https://github.com/tjanczuk/iisnode/issues/149
I've got a cron job running every 1 second, to check if any website totals need to be updated. Could this be causing IIS Express to crash?
Cheers
I believe your problem will be resolved if you install and use iisnode for IIS7 64bit (instead of iisnode for iisexpress) from the link below as I could fix a similar issue in past:
http://go.microsoft.com/?linkid=9784331
Related
The problem
IIS ASP.NET Core module is unable to start an ASP.NET Core 2.0 app.
Browser: HTTP Error 502.5 - Process Failure
Windows Event Log: Application ‘MACHINE/WEBROOT/APPHOST/AppSite’ with physical root ‘C:\inetpub\apps\AppFolder\’ failed to start process with commandline ‘C:\inetpub\apps\AppFolder\App.exe’, ErrorCode = ‘0x80004005: 1’.
ASP.NET Core Module Log: Log file is created but is empty.
The setup
App: ASP.NET Core 2.0 targeting .NET Framework 4.6.1.
Server: Windows Server 2012 R2 Standard 6.2.9200 with IIS 8.5.9600.
The story
We've created a blank MVC Web application using the default project templates provided in Visual Studio 2017.
The app is deployed following the official specification: https://learn.microsoft.com/en-us/aspnet/core/host-and-deploy/iis/.
The confusion arises mainly from these two points:
Running the app through command-line on Kestrel works.
Running a different app but targeting .NET Core 2.0 and publishing as framework-dependant works flawlessly on IIS.
But between these two apps: the codebase is the same, the IIS website and application pool is the same and we even emptied out the app directory and used the same one.
Due to these points the only difference seems to be the net461 app's executable file.
We do not have full control over the Windows Server where we're trying to deploy but we do have administrator accounts. The current assumption is that the issue lies within permissions - maybe AD group policies, antivirus blocking the file but we're still awaiting response from the client's sysadmins. Meanwhile we haven't been able to replicate the error code ‘0x80004005: 1’ while trying to setup these restrictions on our development machines.
Here's an incomplete list of ideas and points about the issue we've tried while problem solving:
The initial app (targeting net461) works flawlessly on IIS when
deployed to other servers (Windows 10 Enterprise, Windows Server 2012
R2 Datacenter).
Reinstalling different versions of ASP.NET Core/.NET Core: Runtime & Hosting Bundle.
Setting NTFS permissions to the dotnet folder.
Changing IIS application pool identity to an administrator account.
Restarting the server.
Going over local group and security policies.
Going over the antivirus settings and logs.
Trying to deploy on a brand new server (same OS, same bloat).
All ideas/comments are greatly appreciated. The more obscure the better.
EDIT:
Since this got flagged as a possible duplicate of ASP.NET Core 0x80004005 I need to specify why that is not a duplicate.
That referenced project is an older version of ASP.NET Core (last use
of project.json was in 2016)
That referenced project targets .NET Core and not .NET 4.6.1. It is mentioned here as well that targeting .NET Core works on IIS in regard to this issue.
Selected answer points out that they fixed it by:
Turns out that this was result of needing to install some windows
updates and this problem:
api-ms-win-crt-runtime-l1-1-0.dll is missing when opening Microsoft
Office file
Rather than install the version discussed in the above issue I whet
into Programs and Features and ran a repair on Microsoft Visual C++
2015 Redistributable.
but the installation of Microsoft Visual C++ 2015 Redistributable is one of the steps in the official setup guide and it is mentioned here as well that the official guide has been followed during the setup process.
We have gone over that post and tried to repair and reinstall the Microsoft Visual C++ 2015 Redistributable runtime components and this did not fix the issue.
If anyone stumbles upon this post in the future:
The problem was indeed in the server's antivirus. It wasn't directly blocking the app's executable but its call to a class library in the system folder. This termination did not raise any of the usual alarms.
The application "C:\inetpub\apps\AppFolder\App.exe" attempted to load the library "bcrypt.dll" by calling the function "LoadLibraryExW". The operation was blocked and the application terminated.
After switching the MVC blank app to a completely blank Hello-World app it ran successfully.
I host my ASP.NET .NET Core 2.1 project in Azure Web App service. I recently upgraded to 2.1 (From 2.0) and I started getting these errors:
The specified CGI application encountered an error and the server
terminated the process.
The application typically runs just fine for an hour or so and then suddenly it crashes and all responses return this error. I have to restart it to make the error go away. It was working fine with .NET Core 2.0.
I saw similar issues posted on SO that turned out to be related to earlier Kestrel versions. It shouldn't be the case for me. My project references Microsoft.AspNetCore.App 2.1.1 which has the latest Kestrel version.
This is my production environment, please help.
So finally, I saw there were few extensions added to my azure app service and post deleting the extensions under "Custom" my service is running as expected.
I have an asp.net core 2.0 hosted locally on IIS 10. For some reason DefaultAppPool keeps stopping as soon as I hit the hosted website.
And I am getting HTTP Error 503. The service is unavailable.
In event logs I see following error;
The Module DLL C:\WINDOWS\system32\inetsrv\aspnetcore.dll failed to
load. The data is the error.
When I check the path C:\WINDOWS\system32\inetsrv\ I do not see aspnetcore.dll exists. Should it be there? If yes, .net core installation exe shouldn't be copy it?
Here are some information below;
What I tried, and did not worked?
Troubleshooting IIS AppPool crashes
Uninstalled .net core and reinstalled.
Changed App Pool Identity to Network Service etc.
Any idea how I can fix this?
For hosting .Net Core applications in IIS, .Net CLR Version of application pool should be No Managed Code as shown in below screenshot. If you don't see "No Managed Code" option in in dropdown then you need to install .Net Core Hosting Bundle.
Ensure you have .NET Core Hosting Bundle installed as mentioned here:
https://learn.microsoft.com/en-us/aspnet/core/host-and-deploy/iis/?view=aspnetcore-2.1&tabs=aspnetcore2x
I also had this problem in Windows server 2012 R2
I found this answer:
ASP.NET Core/.NET Core: Runtime & Hosting Bundle (latest versions) depends on Microsoft Visual C++ 2015 Redistributable
Download and install KB2919442
Run windows update, which will download and install KB2919335. Alternatively manually download and install KB2919335
Install Visual Studio 2015 C++ Redistributable
I got this issue one time. Reason was Server OS was x64 base and target run time of installer was win-x86. In the publish wizard, win-x86 is the default option for Target Run time. Theoretically x86 application should work in x64. But after deploying the win-x64 , issue resolved.
Im using IIS 8.5 on Windows Server 2012 R2 so I add my Web Api but when I try to view the site it stays in a loading state like this:
Do not show any message or error just stays loading, I think that i miss some configuration or feature in my IIS but I don't know which one.
Edit: I use .Net framework, it is a REST .net web api like this reference, the IIS have installed .Net versions 3.5 and 4.5, it's IIS not the express and the default IIS website runs fine.
I would really appreciate any help.
Try to reduce the timeout settings to a minimum level, say 10 seconds.
See if it throws a Timeout error.
Without much information from your side its hard to judge.
Perhaps it could be an external service you are trying to access(Web service) or a DB connection?
Please check if the application pool you assigned to your solutions runs under the correct version of .net framework and in integrated mode. I had similar issues when trying to run an mvc app in classic mode. Check this out.
EDIT 1 - Reconfiguring IIS
If problems persists then try the ASP.NET IIS Registration tool. Execute the followig command as administrator:
aspnet_regiis -i
At the end of this post the different locations for aspnet_regiis are described. You should select a .NET Framework version corresponding to that of your project, run aspnet_regiis and assign the proper application pool to your app.
I have just installed windows 7 (IIS7.5) on my development system. I was trying to run my .NET1.1 web applications on it. I have registered .NET1.1, which created an application pool for ASP.NET1.1. The problem I am facing is, when I try to run my 1.1 website using localhost URL, it gives me error "An unhandled win32 exception occured in w3wp.exe, the just-in-time debugger was launched without necessary security permissions. To debug this process, the just-in-time debugger must be run as an Administrator."
Process Details, "Process Name: w3wp.exe, UserName: IIS APPPOOL\ASP.NET1.1[Elevated]"
Can someone help me resolving this error?
Thanks
I have resolved the problem. Following URL gives step by step instructions for installing and enabling the .NET1.1 on IIS7. Things are little bit different on windows7 but almost similar.
http://learn.iis.net/page.aspx/472/how-to-install-aspnet-11-with-iis7-on-vista-and-windows-2008/
The main part is installation of .NET Framework Version 1.1 Service Pack 1
and then installation of ASP.NET Security Update for .NET Framework 1.1 SP1
It resolved my problem as defined in the question of this thread.
Thanks everyone