Related
Seems that the recommended way of doing indirect variable setting in bash is to use eval:
var=x; val=foo
eval $var=$val
echo $x # --> foo
The problem is the usual one with eval:
var=x; val=1$'\n'pwd
eval $var=$val # bad output here
(and since it is recommended in many places, I wonder just how many scripts are vulnerable because of this...)
In any case, the obvious solution of using (escaped) quotes doesn't really work:
var=x; val=1\"$'\n'pwd\"
eval $var=\"$val\" # fail with the above
The thing is that bash has indirect variable reference baked in (with ${!foo}), but I don't see any such way to do indirect assignment -- is there any sane way to do this?
For the record, I did find a solution, but this is not something that I'd consider "sane"...:
eval "$var='"${val//\'/\'\"\'\"\'}"'"
A slightly better way, avoiding the possible security implications of using eval, is
declare "$var=$val"
Note that declare is a synonym for typeset in bash. The typeset command is more widely supported (ksh and zsh also use it):
typeset "$var=$val"
In modern versions of bash, one should use a nameref.
declare -n var=x
x=$val
It's safer than eval, but still not perfect.
Bash has an extension to printf that saves its result into a variable:
printf -v "${VARNAME}" '%s' "${VALUE}"
This prevents all possible escaping issues.
If you use an invalid identifier for $VARNAME, the command will fail and return status code 2:
$ printf -v ';;;' '%s' foobar; echo $?
bash: printf: `;;;': not a valid identifier
2
eval "$var=\$val"
The argument to eval should always be a single string enclosed in either single or double quotes. All code that deviates from this pattern has some unintended behavior in edge cases, such as file names with special characters.
When the argument to eval is expanded by the shell, the $var is replaced with the variable name, and the \$ is replaced with a simple dollar. The string that is evaluated therefore becomes:
varname=$value
This is exactly what you want.
Generally, all expressions of the form $varname should be enclosed in double quotes, to prevent accidental expansion of filename patterns like *.c.
There are only two places where the quotes may be omitted since they are defined to not expand pathnames and split fields: variable assignments and case. POSIX 2018 says:
Each variable assignment shall be expanded for tilde expansion, parameter expansion, command substitution, arithmetic expansion, and quote removal prior to assigning the value.
This list of expansions is missing the parameter expansion and the field splitting. Sure, that's hard to see from reading this sentence alone, but that's the official definition.
Since this is a variable assignment, the quotes are not needed here. They don't hurt, though, so you could also write the original code as:
eval "$var=\"the value is \$val\""
Note that the second dollar is escaped using a backslash, to prevent it from being expanded in the first run. What happens is:
eval "$var=\"the value is \$val\""
The argument to the command eval is sent through parameter expansion and unescaping, resulting in:
varname="the value is $val"
This string is then evaluated as a variable assignment, which assigns the following value to the variable varname:
the value is value
The main point is that the recommended way to do this is:
eval "$var=\$val"
with the RHS done indirectly too. Since eval is used in the same
environment, it will have $val bound, so deferring it works, and since
now it's just a variable. Since the $val variable has a known name,
there are no issues with quoting, and it could have even been written as:
eval $var=\$val
But since it's better to always add quotes, the former is better, or
even this:
eval "$var=\"\$val\""
A better alternative in bash that was mentioned for the whole thing that
avoids eval completely (and is not as subtle as declare etc):
printf -v "$var" "%s" "$val"
Though this is not a direct answer what I originally asked...
Newer versions of bash support something called "parameter transformation", documented in a section of the same name in bash(1).
"${value#Q}" expands to a shell-quoted version of "${value}" that you can re-use as input.
Which means the following is a safe solution:
eval="${varname}=${value#Q}"
Just for completeness I also want to suggest the possible use of the bash built in read. I've also made corrections regarding -d'' based on socowi's comments.
But much care needs to be exercised when using read to ensure the input is sanitized (-d'' reads until null termination and printf "...\0" terminates the value with a null), and that read itself is executed in the main shell where the variable is needed and not a sub-shell (hence the < <( ... ) syntax).
var=x; val=foo0shouldnotterminateearly
read -d'' -r "$var" < <(printf "$val\0")
echo $x # --> foo0shouldnotterminateearly
echo ${!var} # --> foo0shouldnotterminateearly
I tested this with \n \t \r spaces and 0, etc it worked as expected on my version of bash.
The -r will avoid escaping \, so if you had the characters "\" and "n" in your value and not an actual newline, x will contain the two characters "\" and "n" also.
This method may not be aesthetically as pleasing as the eval or printf solution, and would be more useful if the value is coming in from a file or other input file descriptor
read -d'' -r "$var" < <( cat $file )
And here are some alternative suggestions for the < <() syntax
read -d'' -r "$var" <<< "$val"$'\0'
read -d'' -r "$var" < <(printf "$val") #Apparently I didn't even need the \0, the printf process ending was enough to trigger the read to finish.
read -d'' -r "$var" <<< $(printf "$val")
read -d'' -r "$var" <<< "$val"
read -d'' -r "$var" < <(printf "$val")
Yet another way to accomplish this, without eval, is to use "read":
INDIRECT=foo
read -d '' -r "${INDIRECT}" <<<"$(( 2 * 2 ))"
echo "${foo}" # outputs "4"
I want to first the first character of a string, for example:
$>./first $foreignKey
And I want to get "$"
I googled it and I found some solutions but it concerns only bash and not Sh !
This should work on any Posix compatible shell (including sh). printf is not required to be a builtin but it often is, so this may save a fork or two:
first_letter=$(printf %.1s "$1")
Note: (Possibly I should have explained this six years ago when I wrote this brief answer.) It might be tempting to write %c instead of %.1s; that produces exactly the same result except in the case where the argument "$1" is empty. printf %c "" actually produces a NUL byte, which is not a valid character in a Posix shell; different shells might treat this case differently. Some will allow NULs as an extension; others, like bash, ignore the NUL but generate an error message to tell you it has happened. The precise semantics of %.1s is "at most 1 character at the start of the argument, which means that first_letter is guaranteed to be set to the empty string if the argument is the empty string, without raising any error indication.
Well, you'll probably need to escape that particular value to prevent it being interpreted as a shell variable but, if you don't have access to the nifty bash substring facility, you can still use something like:
name=paxdiablo
firstchar=`echo $name | cut -c1-1`
If you do have bash (it's available on most Linux distros and, even if your login shell is not bash, you should be able to run scripts with it), it's the much easier:
firstchar=${name:0:1}
For escaping the value so that it's not interpreted by the shell, you need to use:
./first \$foreignKey
and the following first script shows how to get it:
letter=`echo $1 | cut -c1-1`
echo ".$letter."
Maybe it is an old question.
recently I got the same problem, according to POSIX shell manual about substring processing, this is my solution without involving any subshell/fork
a="some string here"
printf 'first char is "%s"\n' "${a%"${a#?}"}"
for shell sh
echo "hello" | cut -b 1 # -b 1 extract the 1st byte
h
echo "hello" |grep -o "." | head -n 1
h
echo "hello" | awk -F "" '{print $1}'
h
you can try this for bash:
s='hello'; echo ${s:0:1}
h
printf -v first_character "%c" "${variable}"
cat test.sh
#!/bin/bash
key="index";
arr[$key]="val"
echo ${arr[${key}]}
/bin/bash-x test.sh
+ key=index
+ arr[$key]=val
+ echo val
val
then I modify the test.sh:
#!/bin/bash
key="index.index";
arr[$key]="val"
echo ${arr[${key}]}
/bin/bash -x test.sh
+ key=index.index
+ arr[$key]=val
test.sh: line 3: index.index: syntax error: invalid arithmetic operator (error token is ".index")
test.sh: line 4: index.index: syntax error: invalid arithmetic operator (error token is ".index")
why this error appears, any suggestion will be appreciate!
This:
key="index";
arr[$key]="val"
echo ${arr[${key}]}
only appears to work. Since arr is an ordinary array, not an associative array, it can only be indexed by non-negative integer values.
Consider this valid code:
index=42
key="index"
arr[$key]="val"
echo ${arr[42]}
echo ${arr[index]}
echo ${arr[$index]}
echo ${arr['index']}
echo ${arr["index"]}
echo ${arr[\index]}
All the echo statements print val. Since the index is treated as an arithmetic expression, it can refer to a variable (in this case, $index) either with or without the $ prefix -- even if it's a quoted string.
In your code, where you never assigned a value to $index, ${arr[${key}]} expands to ${arr[index]}, which is equivalent to ${arr[$index]}, which is treated (by default) as equivalent to ${arr[0]}.
(If you have set -o nounset, then references to unset variables are treated as errors, and your code will produce an error message.)
Your second chunk of code:
key="index.index";
arr[$key]="val"
echo ${arr[${key}]}
is invalid because index.index is not a valid variable name -- even though you probably meant it to be just a string used as an array index.
If you want arr to permit arbitrary strings as indices, it needs to be an associative array. You can create a non-associative array simply by assigning to it (or by using declare -a), but an associative array can only be created with declare -A.
Associative arrays were added to bash in version 4. If you're using an earlier version of bash, declare -A is not supported. You'll need to upgrade to a newer bash, code up some clumsy alternative, or use a language that does support associative arrays, like Awk, Python, or Perl.
Adding declare -A arr (as user000001's answer suggests) should solve the problem (if you have bash 4), but it's instructive to understand what your original code is actually doing (or rather not doing).
(BTW, thanks for asking this; I learned a lot as I was composing this answer.)
Declare the array variable as an associative array with declare -A arr.
$ cat test.sh
#!/bin/bash
set -x
declare -A arr
key="index.index";
arr["$key"]="val"
echo "${arr["${key}"]}"
$ ./test.sh
+ declare -A arr
+ key=index.index
+ arr["$key"]=val
+ echo val
val
This behavior varies by BASH version. Older BASH versions only allowed non negative integers as the keys in arrays.
Please note that dot/period is not allowed in a variable name in BASH.
See this Q&A for more details about allowed characters in BASH: Allowed characters in linux environment variable names
EDIT:
(Many thanks to #chepner for this addendum)
Regular arrays (not associative array) are indexed by integer only. Any expression used as an index between square brackets is treated as an arithmetic expression. $key expands to index, which is then treated as an (unset) variable which expands to 0. If you assigned a value of, say, 3 to index, then ${array[$key]} -> ${array[index]} -> ${array[3]}. It's a type of implicit indirect parameter expansion
After reading the Bash man pages and with respect to this post, I am still having trouble understanding what exactly the eval command does and which would be its typical uses.
For example, if we do:
$ set -- one two three # Sets $1 $2 $3
$ echo $1
one
$ n=1
$ echo ${$n} ## First attempt to echo $1 using brackets fails
bash: ${$n}: bad substitution
$ echo $($n) ## Second attempt to echo $1 using parentheses fails
bash: 1: command not found
$ eval echo \${$n} ## Third attempt to echo $1 using 'eval' succeeds
one
What exactly is happening here and how do the dollar sign and the backslash tie into the problem?
eval takes a string as its argument, and evaluates it as if you'd typed that string on a command line. (If you pass several arguments, they are first joined with spaces between them.)
${$n} is a syntax error in bash. Inside the braces, you can only have a variable name, with some possible prefix and suffixes, but you can't have arbitrary bash syntax and in particular you can't use variable expansion. There is a way of saying “the value of the variable whose name is in this variable”, though:
echo ${!n}
one
$(…) runs the command specified inside the parentheses in a subshell (i.e. in a separate process that inherits all settings such as variable values from the current shell), and gathers its output. So echo $($n) runs $n as a shell command, and displays its output. Since $n evaluates to 1, $($n) attempts to run the command 1, which does not exist.
eval echo \${$n} runs the parameters passed to eval. After expansion, the parameters are echo and ${1}. So eval echo \${$n} runs the command echo ${1}.
Note that most of the time, you must use double quotes around variable substitutions and command substitutions (i.e. anytime there's a $): "$foo", "$(foo)". Always put double quotes around variable and command substitutions, unless you know you need to leave them off. Without the double quotes, the shell performs field splitting (i.e. it splits value of the variable or the output from the command into separate words) and then treats each word as a wildcard pattern. For example:
$ ls
file1 file2 otherfile
$ set -- 'f* *'
$ echo "$1"
f* *
$ echo $1
file1 file2 file1 file2 otherfile
$ n=1
$ eval echo \${$n}
file1 file2 file1 file2 otherfile
$eval echo \"\${$n}\"
f* *
$ echo "${!n}"
f* *
eval is not used very often. In some shells, the most common use is to obtain the value of a variable whose name is not known until runtime. In bash, this is not necessary thanks to the ${!VAR} syntax. eval is still useful when you need to construct a longer command containing operators, reserved words, etc.
Simply think of eval as "evaluating your expression one additional time before execution"
eval echo \${$n} becomes echo $1 after the first round of evaluation. Three changes to notice:
The \$ became $ (The backslash is needed, otherwise it tries to evaluate ${$n}, which means a variable named {$n}, which is not allowed)
$n was evaluated to 1
The eval disappeared
In the second round, it is basically echo $1 which can be directly executed.
So eval <some command> will first evaluate <some command> (by evaluate here I mean substitute variables, replace escaped characters with the correct ones etc.), and then run the resultant expression once again.
eval is used when you want to dynamically create variables, or to read outputs from programs specifically designed to be read like this. See Eval command and security issues for examples. The link also contains some typical ways in which eval is used, and the risks associated with it.
In my experience, a "typical" use of eval is for running commands that generate shell commands to set environment variables.
Perhaps you have a system that uses a collection of environment variables, and you have a script or program that determines which ones should be set and their values. Whenever you run a script or program, it runs in a forked process, so anything it does directly to environment variables is lost when it exits. But that script or program can send the export commands to standard output.
Without eval, you would need to redirect standard output to a temporary file, source the temporary file, and then delete it. With eval, you can just:
eval "$(script-or-program)"
Note the quotes are important. Take this (contrived) example:
# activate.sh
echo 'I got activated!'
# test.py
print("export foo=bar/baz/womp")
print(". activate.sh")
$ eval $(python test.py)
bash: export: `.': not a valid identifier
bash: export: `activate.sh': not a valid identifier
$ eval "$(python test.py)"
I got activated!
The eval statement tells the shell to take eval’s arguments as commands and run them through the command-line. It is useful in a situation like below:
In your script if you are defining a command into a variable and later on you want to use that command then you should use eval:
a="ls | more"
$a
Output:
bash: command not found: ls | more
The above command didn't work as ls tried to list file with name pipe (|) and more. But these files are not there:
eval $a
Output:
file.txt
mailids
remote_cmd.sh
sample.txt
tmp
Update: Some people say one should -never- use eval. I disagree. I think the risk arises when corrupt input can be passed to eval. However there are many common situations where that is not a risk, and therefore it is worth knowing how to use eval in any case. This stackoverflow answer explains the risks of eval and alternatives to eval. Ultimately it is up to the user to determine if/when eval is safe and efficient to use.
The bash eval statement allows you to execute lines of code calculated or acquired, by your bash script.
Perhaps the most straightforward example would be a bash program that opens another bash script as a text file, reads each line of text, and uses eval to execute them in order. That's essentially the same behavior as the bash source statement, which is what one would use, unless it was necessary to perform some kind of transformation (e.g. filtering or substitution) on the content of the imported script.
I rarely have needed eval, but I have found it useful to read or write variables whose names were contained in strings assigned to other variables. For example, to perform actions on sets of variables, while keeping the code footprint small and avoiding redundancy.
eval is conceptually simple. However, the strict syntax of the bash language, and the bash interpreter's parsing order can be nuanced and make eval appear cryptic and difficult to use or understand. Here are the essentials:
The argument passed to eval is a string expression that is calculated at runtime. eval will execute the final parsed result of its argument as an actual line of code in your script.
Syntax and parsing order are stringent. If the result isn't an executable line of bash code, in scope of your script, the program will crash on the eval statement as it tries to execute garbage.
When testing you can replace the eval statement with echo and look at what is displayed. If it is legitimate code in the current context, running it through eval will work.
The following examples may help clarify how eval works...
Example 1:
eval statement in front of 'normal' code is a NOP
$ eval a=b
$ eval echo $a
b
In the above example, the first eval statements has no purpose and can be eliminated. eval is pointless in the first line because there is no dynamic aspect to the code, i.e. it already parsed into the final lines of bash code, thus it would be identical as a normal statement of code in the bash script. The 2nd eval is pointless too, because, although there is a parsing step converting $a to its literal string equivalent, there is no indirection (e.g. no referencing via string value of an actual bash noun or bash-held script variable), so it would behave identically as a line of code without the eval prefix.
Example 2:
Perform var assignment using var names passed as string values.
$ key="mykey"
$ val="myval"
$ eval $key=$val
$ echo $mykey
myval
If you were to echo $key=$val, the output would be:
mykey=myval
That, being the final result of string parsing, is what will be executed by eval, hence the result of the echo statement at the end...
Example 3:
Adding more indirection to Example 2
$ keyA="keyB"
$ valA="valB"
$ keyB="that"
$ valB="amazing"
$ eval eval \$$keyA=\$$valA
$ echo $that
amazing
The above is a bit more complicated than the previous example, relying more heavily on the parsing-order and peculiarities of bash. The eval line would roughly get parsed internally in the following order (note the following statements are pseudocode, not real code, just to attempt to show how the statement would get broken down into steps internally to arrive at the final result).
eval eval \$$keyA=\$$valA # substitution of $keyA and $valA by interpreter
eval eval \$keyB=\$valB # convert '$' + name-strings to real vars by eval
eval $keyB=$valB # substitution of $keyB and $valB by interpreter
eval that=amazing # execute string literal 'that=amazing' by eval
If the assumed parsing order doesn't explain what eval is doing enough, the third example may describe the parsing in more detail to help clarify what is going on.
Example 4:
Discover whether vars, whose names are contained in strings, themselves contain string values.
a="User-provided"
b="Another user-provided optional value"
c=""
myvarname_a="a"
myvarname_b="b"
myvarname_c="c"
for varname in "myvarname_a" "myvarname_b" "myvarname_c"; do
eval varval=\$$varname
if [ -z "$varval" ]; then
read -p "$varname? " $varname
fi
done
In the first iteration:
varname="myvarname_a"
Bash parses the argument to eval, and eval sees literally this at runtime:
eval varval=\$$myvarname_a
The following pseudocode attempts to illustrate how bash interprets the above line of real code, to arrive at the final value executed by eval. (the following lines descriptive, not exact bash code):
1. eval varval="\$" + "$varname" # This substitution resolved in eval statement
2. .................. "$myvarname_a" # $myvarname_a previously resolved by for-loop
3. .................. "a" # ... to this value
4. eval "varval=$a" # This requires one more parsing step
5. eval varval="User-provided" # Final result of parsing (eval executes this)
Once all the parsing is done, the result is what is executed, and its effect is obvious, demonstrating there is nothing particularly mysterious about eval itself, and the complexity is in the parsing of its argument.
varval="User-provided"
The remaining code in the example above simply tests to see if the value assigned to $varval is null, and, if so, prompts the user to provide a value.
I originally intentionally never learned how to use eval, because most people will recommend to stay away from it like the plague. However I recently discovered a use case that made me facepalm for not recognizing it sooner.
If you have cron jobs that you want to run interactively to test, you might view the contents of the file with cat, and copy and paste the cron job to run it. Unfortunately, this involves touching the mouse, which is a sin in my book.
Lets say you have a cron job at /etc/cron.d/repeatme with the contents:
*/10 * * * * root program arg1 arg2
You cant execute this as a script with all the junk in front of it, but we can use cut to get rid of all the junk, wrap it in a subshell, and execute the string with eval
eval $( cut -d ' ' -f 6- /etc/cron.d/repeatme)
The cut command only prints out the 6th field of the file, delimited by spaces. Eval then executes that command.
I used a cron job here as an example, but the concept is to format text from stdout, and then evaluate that text.
The use of eval in this case is not insecure, because we know exactly what we will be evaluating before hand.
I've recently had to use eval to force multiple brace expansions to be evaluated in the order I needed. Bash does multiple brace expansions from left to right, so
xargs -I_ cat _/{11..15}/{8..5}.jpg
expands to
xargs -I_ cat _/11/8.jpg _/11/7.jpg _/11/6.jpg _/11/5.jpg _/12/8.jpg _/12/7.jpg _/12/6.jpg _/12/5.jpg _/13/8.jpg _/13/7.jpg _/13/6.jpg _/13/5.jpg _/14/8.jpg _/14/7.jpg _/14/6.jpg _/14/5.jpg _/15/8.jpg _/15/7.jpg _/15/6.jpg _/15/5.jpg
but I needed the second brace expansion done first, yielding
xargs -I_ cat _/11/8.jpg _/12/8.jpg _/13/8.jpg _/14/8.jpg _/15/8.jpg _/11/7.jpg _/12/7.jpg _/13/7.jpg _/14/7.jpg _/15/7.jpg _/11/6.jpg _/12/6.jpg _/13/6.jpg _/14/6.jpg _/15/6.jpg _/11/5.jpg _/12/5.jpg _/13/5.jpg _/14/5.jpg _/15/5.jpg
The best I could come up with to do that was
xargs -I_ cat $(eval echo _/'{11..15}'/{8..5}.jpg)
This works because the single quotes protect the first set of braces from expansion during the parsing of the eval command line, leaving them to be expanded by the subshell invoked by eval.
There may be some cunning scheme involving nested brace expansions that allows this to happen in one step, but if there is I'm too old and stupid to see it.
You asked about typical uses.
One common complaint about shell scripting is that you (allegedly) can't pass by reference to get values back out of functions.
But actually, via "eval", you can pass by reference. The callee can pass back a list of variable assignments to be evaluated by the caller. It is pass by reference because the caller can allowed to specify the name(s) of the result variable(s) - see example below. Error results can be passed back standard names like errno and errstr.
Here is an example of passing by reference in bash:
#!/bin/bash
isint()
{
re='^[-]?[0-9]+$'
[[ $1 =~ $re ]]
}
#args 1: name of result variable, 2: first addend, 3: second addend
iadd()
{
if isint ${2} && isint ${3} ; then
echo "$1=$((${2}+${3}));errno=0"
return 0
else
echo "errstr=\"Error: non-integer argument to iadd $*\" ; errno=329"
return 1
fi
}
var=1
echo "[1] var=$var"
eval $(iadd var A B)
if [[ $errno -ne 0 ]]; then
echo "errstr=$errstr"
echo "errno=$errno"
fi
echo "[2] var=$var (unchanged after error)"
eval $(iadd var $var 1)
if [[ $errno -ne 0 ]]; then
echo "errstr=$errstr"
echo "errno=$errno"
fi
echo "[3] var=$var (successfully changed)"
The output looks like this:
[1] var=1
errstr=Error: non-integer argument to iadd var A B
errno=329
[2] var=1 (unchanged after error)
[3] var=2 (successfully changed)
There is almost unlimited band width in that text output! And there are more possibilities if the multiple output lines are used: e.g., the first line could be used for variable assignments, the second for continuous 'stream of thought', but that's beyond the scope of this post.
In the question:
who | grep $(tty | sed s:/dev/::)
outputs errors claiming that files a and tty do not exist. I understood this to mean that tty is not being interpreted before execution of grep, but instead that bash passed tty as a parameter to grep, which interpreted it as a file name.
There is also a situation of nested redirection, which should be handled by matched parentheses which should specify a child process, but bash is primitively a word separator, creating parameters to be sent to a program, therefore parentheses are not matched first, but interpreted as seen.
I got specific with grep, and specified the file as a parameter instead of using a pipe. I also simplified the base command, passing output from a command as a file, so that i/o piping would not be nested:
grep $(tty | sed s:/dev/::) <(who)
works well.
who | grep $(echo pts/3)
is not really desired, but eliminates the nested pipe and also works well.
In conclusion, bash does not seem to like nested pipping. It is important to understand that bash is not a new-wave program written in a recursive manner. Instead, bash is an old 1,2,3 program, which has been appended with features. For purposes of assuring backward compatibility, the initial manner of interpretation has never been modified. If bash was rewritten to first match parentheses, how many bugs would be introduced into how many bash programs? Many programmers love to be cryptic.
As clearlight has said, "(p)erhaps the most straightforward example would be a bash program that opens another bash script as a text file, reads each line of text, and uses eval to execute them in order". I'm no expert, but the textbook I'm currently reading (Shell-Programmierung by Jürgen Wolf) points to one particular use of this that I think would be a valuable addition to the set of potential use cases collected here.
For debugging purposes, you may want to go through your script line by line (pressing Enter for each step). You could use eval to execute every line by trapping the DEBUG signal (which I think is sent after every line):
trap 'printf "$LINENO :-> " ; read line ; eval $line' DEBUG
I like the "evaluating your expression one additional time before execution" answer, and would like to clarify with another example.
var="\"par1 par2\""
echo $var # prints nicely "par1 par2"
function cntpars() {
echo " > Count: $#"
echo " > Pars : $*"
echo " > par1 : $1"
echo " > par2 : $2"
if [[ $# = 1 && $1 = "par1 par2" ]]; then
echo " > PASS"
else
echo " > FAIL"
return 1
fi
}
# Option 1: Will Pass
echo "eval \"cntpars \$var\""
eval "cntpars $var"
# Option 2: Will Fail, with curious results
echo "cntpars \$var"
cntpars $var
The curious results in option 2 are that we would have passed two parameters as follows:
First parameter: "par1
Second parameter: par2"
How is that for counter intuitive? The additional eval will fix that.
It was adapted from another answer on How can I reference a file for variables using Bash?
I am working on linux scripts and want to extract a substring out of a master string as in the following example :-
Master string =
2011-12-03 11:04:22#Alex#Audrino^13b11254^Townville#USA#
What I require is :-
Substring =
13b11254
I simply want to read and extract whatever is there in between ^ ^ special characters.
This code will be used in a linux script.
Using standard shell parameter expansion:
% s='2011-12-03 11:04:22#Alex#Audrino^13b11254^Townville#USA#' ss=${s#*^} ss=${ss%^*}
% printf '%s\n' "$ss"
13b11254
The solution bellow uses the cut utility, which spawns a process and is slower that the shell parameter expansion solution. It might be easier to understand, and can be run on a file instead of on a single string.
s='2011-12-03 11:04:22#Alex#Audrino^13b11254^Townville#USA#'
echo $s | cut -d '^' -f 2
You can also use bash arrays and field separator:
IFS="^"
s='2011-12-03 11:04:22#Alex#Audrino^13b11254^Townville#USA#'
array=($s)
echo ${array[1]}
This allows you to test is you have exactly 2 separators:
if [ ${#array[*]} -ne 3 ]
then
echo error
else
echo ok
fi
POSIX sh compatible:
temp="${string#*^}"
printf "%s\n" "${temp%^*}"
Assumes that ^ is only used 2x per string as the 2 delimiters.