I’d like to merge two blocks of lines in Vim, i.e., take lines k through l and append them to lines m through n. If you prefer a pseudocode explanation: [line[k+i] + line[m+i] for i in range(min(l-k, n-m)+1)].
For example,
abc
def
...
123
45
...
should become
abc123
def45
Is there a nice way to do this without copying and pasting manually line by line?
You can certainly do all this with a single copy/paste (using block-mode selection), but I'm guessing that's not what you want.
If you want to do this with just Ex commands
:5,8del | let l=split(#") | 1,4s/$/\=remove(l,0)/
will transform
work it
make it
do it
makes us
harder
better
faster
stronger
~
into
work it harder
make it better
do it faster
makes us stronger
~
UPDATE: An answer with this many upvotes deserves a more thorough explanation.
In Vim, you can use the pipe character (|) to chain multiple Ex commands, so the above is equivalent to
:5,8del
:let l=split(#")
:1,4s/$/\=remove(l,0)/
Many Ex commands accept a range of lines as a prefix argument - in the above case the 5,8 before the del and the 1,4 before the s/// specify which lines the commands operate on.
del deletes the given lines. It can take a register argument, but when one is not given, it dumps the lines to the unnamed register, #", just like deleting in normal mode does. let l=split(#") then splits the deleted lines into a list, using the default delimiter: whitespace. To work properly on input that had whitespace in the deleted lines, like:
more than
hour
our
never
ever
after
work is
over
~
we'd need to specify a different delimiter, to prevent "work is" from being split into two list elements: let l=split(#","\n").
Finally, in the substitution s/$/\=remove(l,0)/, we replace the end of each line ($) with the value of the expression remove(l,0). remove(l,0) alters the list l, deleting and returning its first element. This lets us replace the deleted lines in the order in which we read them. We could instead replace the deleted lines in reverse order by using remove(l,-1).
An elegant and concise Ex command solving the issue can be obtained by
combining the :global, :move, and :join commands. Assuming that
the first block of lines starts on the first line of the buffer, and
that the cursor is located on the line immediately preceding the first
line of the second block, the command is as follows.
:1,g/^/''+m.|-j!
For detailed explanation of this technique, see my answer to
an essentially the same question “How to achieve the “paste -d '␣'”
behavior out of the box in Vim?”.
To join blocks of line, you have to do the following steps:
Go to the third line: jj
Enter visual block mode: CTRL-v
Anchor the cursor to the end of the line (important for lines of differing length): $
Go to the end: CTRL-END
Cut the block: x
Go to the end of the first line: kk$
Paste the block here: p
The movement is not the best one (I'm not an expert), but it works like you wanted. Hope there will be a shorter version of it.
Here are the prerequisits so this technique works well:
All lines of the starting block (in the example in the question abc and def) have the same length XOR
the first line of the starting block is the longest, and you don't care about the additional spaces in between) XOR
The first line of the starting block is not the longest, and you additional spaces to the end.
Here's how I'd do it (with the cursor on the first line):
qama:5<CR>y$'a$p:5<CR>dd'ajq3#a
You need to know two things:
The line number on which the first line of the second group starts (5 in my case), and
the number of lines in each group (3 in my example).
Here's what's going on:
qa records everything up to the next q into a "buffer" in a.
ma creates a mark on the current line.
:5<CR> goes to the next group.
y$ yanks the rest of the line.
'a returns to the mark, set earlier.
$p pastes at the end of the line.
:5<CR> returns to the second group's first line.
dd deletes it.
'a returns to the mark.
jq goes down one line, and stops recording.
3#a repeats the action for each line (3 in my case)
As mentioned elsewhere, block selection is the way to go. But you can also use any variant of:
:!tail -n -6 % | paste -d '\0' % - | head -n 5
This method relies on the UNIX command line. The paste utility was created to handle this sort of line merging.
PASTE(1) BSD General Commands Manual PASTE(1)
NAME
paste -- merge corresponding or subsequent lines of files
SYNOPSIS
paste [-s] [-d list] file ...
DESCRIPTION
The paste utility concatenates the corresponding lines of the given input files, replacing all but the last file's newline characters with a single tab character,
and writes the resulting lines to standard output. If end-of-file is reached on an input file while other input files still contain data, the file is treated as if
it were an endless source of empty lines.
Sample data is the same as rampion's.
:1,4s/$/\=getline(line('.')+4)/ | 5,8d
I wouldn't think make it too complicated.
I would just set virtualedit on
(:set virtualedit=all)
Select block 123 and all below.
Put it after the first column:
abc 123
def 45
... ...
and remove the multiple space between to 1 space:
:%s/\s\{2,}/ /g
I would use complex repeats :)
Given this:
aaa
bbb
ccc
AAA
BBB
CCC
With the cursor on the first line, press the following:
qa}jdd''pkJxjq
and then press #a (and you may subsequently use ##) as many times as needed.
You should end up with:
aaaAAA
bbbBBB
cccCCC
(Plus a newline.)
Explaination:
qa starts recording a complex repeat in a
} jumps to the next empty line
jdd deletes the next line
'' goes back to the position before the last jump
p paste the deleted line under the current one
kJ append the current line to the end of the previous one
x delete the space that J adds between the combined lines; you can omit this if you want the space
j go to the next line
q end the complex repeat recording
After that you'd use #a to run the complex repeat stored in a, and then you can use ## to rerun the last ran complex repeat.
There can be many number of ways to accomplish this. I will merge two blocks of text using any of the following two methods.
suppose first block is at line 1 and 2nd block starts from line 10 with the cursor's initial position at line number 1.
(\n means pressing the enter key.)
1. abc
def
ghi
10. 123
456
789
with a macro using the commands: copy,paste and join.
qaqqa:+9y\npkJjq2#a10G3dd
with a macro using the commands move a line at nth line number and join.
qcqqc:10m .\nkJjq2#c
Related
How to copy the current line content to the end of each line for the whole file ?
For example:
From
hello
world
!
To
hello hello
world world
! !
Handling text in columns is what Visual-Block mode is made for!
You can create a blockwise Visual selection for all your text with:
gg to go to the Top; then
Ctrl+V to start Visual Block mode. (You might see -- VISUAL BLOCK -- at the last line of the screen.)
G to go to the last line of the buffer.
$ to select until the end of each line. This is pretty important! Since lines might have different number of characters, the $ behaves in a special way, in that instead of forcing a rectangle format to the selection, it extends it to the longest line, whatever number of columns it has.
Once you got everything selected in a Visual Block, you can use y to yank it into the unnamed register.
At that point, when you put it, it will come back as a block, as a column.
Go back to the first line, using gg, then append a certain number of spaces to get you to the column where you want your second copy to appear. For example, for 20 spaces, you can use 20A then Space and Esc.
At that point, you can go to the end of that line with $ and simply put with p. Sine the register was yanked in Visual Block mode, Vim will remember that and put the contents as a column. Lines that need to be extended with spaces to make it to allow for the pasted text to start in the later column will get extended automatically.
Also useful (with the Visual Block mode) is the 'virtualedit' option, which lets you navigate the cursor past the end of lines. If you enable it with :set virtualedit=all, then you can skip the part about adding enough spaces to the first line, since you can simply navigate to the appropriate column and the act of pasting the Visual Block contents with p will extend the first line with spaces as well.
:%s/^\(.*\)$/\1 \1
% - whole file
s/^\(.*\)$ - match line from the beginning to end
/\1 \1 - replace it with matched text two times.
There may be a problem with formatting those lines in columns.
Here is an example:
hello hello
hello hello
world world
! !
This can be solved with addition of trailing spaces, the the shorter lines, like this: (. - denotes trailing space)
hello hello
hello hello
world world
!.... !....
As mentioned by #mattb in the comment, column formatting issue can be fixed with column command (it has to be on your PATH though):
:%s/^\(.*\)$/\1 \1/ | %!column -t
I have a file in which first 10 lines are the columns of a table and the rest 10 lines are the values of each column.
How can I use norm in VIM to append the values after each column names like this:
column1
...
column10
value1
...value10
-->
column1: value1
...
column10: value10
It is a little similar with this(Vim - Copy Nth word of each line, from line 10-100, to end of line), but I don't know how to go to line 1:10 and append the copied lines.
Any idea will be appreciated!
Fairly naive and crude way to do this, but:
:1,10norm! 10j0d$10kA: ^[p
Explanation:
1,10norm!: for lines 1 to 10, do the following (the ! means any custom mapping you have will be ignored, thanks to D. Ben Knoble for reminding of this):
10j: move down 10 lines
0d$: delete the whole line (not including newline)
10k: move back up 10 lines
A:: append (at the end of the line) ': ' (note the trailing space)
^[: input escape character, going back to normal mode. This (^[) is a single character and is inputted by typing Ctrl-v then escape, not by typing ^[.
p: paste the line deleted in step 3
Another (copy-pastable) way, (ab)using the substitute command:
:1,10s/\v(.*)\ze(.*\n){10}(.*)/\1: \3/ | 11,20d
which does:
1,10s/: for lines 1 to 10, execute the following substitution:
\v: use very-magic regex mode (see :help \v)
(.*): capture the entire current line (eg column1)
\ze: signal the end of the match. This way everything read (and captured) afterwards will not be affected (but can still be read)
(.*\n){10}: skip 10 (including current) lines, ie skip selector to 10 lines below
(.*): capture the line (eg value1)
/: end the 'select' part of the substitute command
\1: \3: replace with captured groups (eg column1: value1)
|: command separator
11,20d: delete lines 11 to 20
Use blockwise-visual mode to perform the operations.
You can enter visual block mode with Ctrl-V and it allows you to select and operate on columns. It also allows you to perform the same action on a block, which you can use to add the : to the lines with the column names.
I'll use normal Vim syntax for keystrokes in my examples, <C-v> means Ctrl-V.
Start by deleting the values into the default register, using a visual block:
11G<C-v>9j$d
Then Add the : to the column lines, also using a visual block:
1G<C-v>9j$A: <Esc>
Then add some more spaces to the first line, to ensure there's room for all the column names to fit:
A <Esc>
Finally, put the visual block at the end of the first line:
$p
It will actually put it on all lines all the way to the end.
This is slightly different from what you specified, since the values are all aligned on the same column. If you want different spacing, you can perhaps use a :s operation to fix spacing.
10:s/: */: /<cr>
Depending on where you pasted (if some column names had more trailing spaces than the first one), you might have some trailing spaces after the pasted values to fix as well, but that should be easy to do using a similar procedure.
Visual block operations are really powerful, it's a great feature to learn and keep in your "toolbox" in Vim. They're really handy with this kind of problem where thinking in "columns" makes the most sense.
I have a list of products to place on a rails seed and I would like to instead of put brackets one by one on the list with a command place the brackets on the whole list?
for example:
1. Dakine
2. Dale of Norway
3. Dan Post
1. ["Dakine"],
2. ["Dale of Norway"],
3. ["Dan Post"],
I searched on the help but did not find any about. Thanks.
You can record a macro in Vim and repeat that.
If you are on number 1, you can do following:
qqf a["Esc$a"],Esc0jq
Explanation:
qq: Start recording macro in register q
f: Go to first space character
a: : Insert after (the space character from above)
\[": Insert those characters
Esc: Back to normal mode
$: Go to end of line
a: Insert after (end of line)
"],: Insert the characters
Esc: Back to normal mode
0: Jump to start of line
j: Go down one line
If you have 100 such lines, you can do 100#q to achieve your result.
With vim substitute command:
:%s/.*/["&"]/
If you don't want to operate on all lines, then select the ones you want to transform or note the related line numbers, and then type :s/..... without the %. You'll see actually :'<,'>s this range represent the visually selected lines, and vim adds it automatically in visual mode.
On Atom you can enable the find to use Regex in the search(there is a button next to the search field)
Then you can search for something like (^.*$) to get every line separated by groups and in the Replace field you use ["$1"],. The $1 represents the value matched by the Regex.
Then just do a Replace All and remove the last comma in your list if needed.
I’d like to merge two blocks of lines in Vim, i.e., take lines k through l and append them to lines m through n. If you prefer a pseudocode explanation: [line[k+i] + line[m+i] for i in range(min(l-k, n-m)+1)].
For example,
abc
def
...
123
45
...
should become
abc123
def45
Is there a nice way to do this without copying and pasting manually line by line?
You can certainly do all this with a single copy/paste (using block-mode selection), but I'm guessing that's not what you want.
If you want to do this with just Ex commands
:5,8del | let l=split(#") | 1,4s/$/\=remove(l,0)/
will transform
work it
make it
do it
makes us
harder
better
faster
stronger
~
into
work it harder
make it better
do it faster
makes us stronger
~
UPDATE: An answer with this many upvotes deserves a more thorough explanation.
In Vim, you can use the pipe character (|) to chain multiple Ex commands, so the above is equivalent to
:5,8del
:let l=split(#")
:1,4s/$/\=remove(l,0)/
Many Ex commands accept a range of lines as a prefix argument - in the above case the 5,8 before the del and the 1,4 before the s/// specify which lines the commands operate on.
del deletes the given lines. It can take a register argument, but when one is not given, it dumps the lines to the unnamed register, #", just like deleting in normal mode does. let l=split(#") then splits the deleted lines into a list, using the default delimiter: whitespace. To work properly on input that had whitespace in the deleted lines, like:
more than
hour
our
never
ever
after
work is
over
~
we'd need to specify a different delimiter, to prevent "work is" from being split into two list elements: let l=split(#","\n").
Finally, in the substitution s/$/\=remove(l,0)/, we replace the end of each line ($) with the value of the expression remove(l,0). remove(l,0) alters the list l, deleting and returning its first element. This lets us replace the deleted lines in the order in which we read them. We could instead replace the deleted lines in reverse order by using remove(l,-1).
An elegant and concise Ex command solving the issue can be obtained by
combining the :global, :move, and :join commands. Assuming that
the first block of lines starts on the first line of the buffer, and
that the cursor is located on the line immediately preceding the first
line of the second block, the command is as follows.
:1,g/^/''+m.|-j!
For detailed explanation of this technique, see my answer to
an essentially the same question “How to achieve the “paste -d '␣'”
behavior out of the box in Vim?”.
To join blocks of line, you have to do the following steps:
Go to the third line: jj
Enter visual block mode: CTRL-v
Anchor the cursor to the end of the line (important for lines of differing length): $
Go to the end: CTRL-END
Cut the block: x
Go to the end of the first line: kk$
Paste the block here: p
The movement is not the best one (I'm not an expert), but it works like you wanted. Hope there will be a shorter version of it.
Here are the prerequisits so this technique works well:
All lines of the starting block (in the example in the question abc and def) have the same length XOR
the first line of the starting block is the longest, and you don't care about the additional spaces in between) XOR
The first line of the starting block is not the longest, and you additional spaces to the end.
Here's how I'd do it (with the cursor on the first line):
qama:5<CR>y$'a$p:5<CR>dd'ajq3#a
You need to know two things:
The line number on which the first line of the second group starts (5 in my case), and
the number of lines in each group (3 in my example).
Here's what's going on:
qa records everything up to the next q into a "buffer" in a.
ma creates a mark on the current line.
:5<CR> goes to the next group.
y$ yanks the rest of the line.
'a returns to the mark, set earlier.
$p pastes at the end of the line.
:5<CR> returns to the second group's first line.
dd deletes it.
'a returns to the mark.
jq goes down one line, and stops recording.
3#a repeats the action for each line (3 in my case)
As mentioned elsewhere, block selection is the way to go. But you can also use any variant of:
:!tail -n -6 % | paste -d '\0' % - | head -n 5
This method relies on the UNIX command line. The paste utility was created to handle this sort of line merging.
PASTE(1) BSD General Commands Manual PASTE(1)
NAME
paste -- merge corresponding or subsequent lines of files
SYNOPSIS
paste [-s] [-d list] file ...
DESCRIPTION
The paste utility concatenates the corresponding lines of the given input files, replacing all but the last file's newline characters with a single tab character,
and writes the resulting lines to standard output. If end-of-file is reached on an input file while other input files still contain data, the file is treated as if
it were an endless source of empty lines.
Sample data is the same as rampion's.
:1,4s/$/\=getline(line('.')+4)/ | 5,8d
I wouldn't think make it too complicated.
I would just set virtualedit on
(:set virtualedit=all)
Select block 123 and all below.
Put it after the first column:
abc 123
def 45
... ...
and remove the multiple space between to 1 space:
:%s/\s\{2,}/ /g
I would use complex repeats :)
Given this:
aaa
bbb
ccc
AAA
BBB
CCC
With the cursor on the first line, press the following:
qa}jdd''pkJxjq
and then press #a (and you may subsequently use ##) as many times as needed.
You should end up with:
aaaAAA
bbbBBB
cccCCC
(Plus a newline.)
Explaination:
qa starts recording a complex repeat in a
} jumps to the next empty line
jdd deletes the next line
'' goes back to the position before the last jump
p paste the deleted line under the current one
kJ append the current line to the end of the previous one
x delete the space that J adds between the combined lines; you can omit this if you want the space
j go to the next line
q end the complex repeat recording
After that you'd use #a to run the complex repeat stored in a, and then you can use ## to rerun the last ran complex repeat.
There can be many number of ways to accomplish this. I will merge two blocks of text using any of the following two methods.
suppose first block is at line 1 and 2nd block starts from line 10 with the cursor's initial position at line number 1.
(\n means pressing the enter key.)
1. abc
def
ghi
10. 123
456
789
with a macro using the commands: copy,paste and join.
qaqqa:+9y\npkJjq2#a10G3dd
with a macro using the commands move a line at nth line number and join.
qcqqc:10m .\nkJjq2#c
I’m a fan of Visual mode in Vim, as it allows to insert text before any given column.
For example, insertion of spaces after the quotation leaders below:
> one
> two
> three
can be done via <Ctrl-V>jjI <Esc>:
> one
> two
> three
as follows:
Start Visual mode with Ctrl-V.
Extend visual selection with jj.
Insert some spaces with I__.
Propagate the change to all the lines of the block selection with Esc.
Now I have a text file that needs some formatting. This is what it looks like:
start() -- xxx
initialize() -- xxx
go() -- xxx
Now I want to align part of this text to arrange it into columns like this:
start() -- xxx
initialize() -- xxx
go() -- xxx
The problem I have is that I cannot insert a different amount of indentation into each line and merely indenting a fixed amount of spaces/tabs is insufficient.
How can you do an indentation where all indented text will have to be aligned at the same column?
Update
I only figured out a rather verbose and unwieldy method:
Find the string position to indent from: \--.
Insert n (let's say 20) spaces before that: 20i <Esc>.
Delete a part of those spaces back to a certain column (let's say 15): d|15.
Save those steps as a macro and repeat the macro as often as necessary.
But this approach is very ugly, though!
I'm much better off without any vim plugins.
Here is my solution:
<Shift-V>jj:!column -ts --
Then insert -- into multiple lines just as you wrote in the question.
You can also append a number of comments at insertion time.
:set virtualedit=all
<Ctrl-V>jjA-- xxx<Esc>
You have to use a specific plugin, you can use either Tabular or Align plugin in this case.
They both allow you to align text on specific characters, like -- in your example. Their syntax is a bit different though. Pick the one that suit you the most.
Without plugin and if you have already entered your comments without emix's solution:
:,+2 s/--/ &
This will ensure all comments are to be shifted leftwise in order to align them properly.
Then blockwise select the column to which you want to align the text, and : 100<
An easy way to align text in columns is to use the Tabular or
Align plugin. If neither of these is ready at hand, one can use
the following somewhat tricky (and a little cumbersome looking) yet
perfectly working (for the case in question) commands.1,2
:let m=0|g/\ze -- /let m=max([m,searchpos(#/,'c')[1]])
:%s//\=repeat(' ',m-col('.'))
The purpose of the first command is to determine the width of the
column to the left of the separator (which I assume to be --
here). The width is calculated as a maximum of the lengths of the text
in the first column among all the lines. The :global command is used
to enumerate the lines containing the separator (the other lines do
not require aligning). The \ze atom located just after the beginning
of the pattern, sets the end of the match at the same position where
it starts (see :help \ze). Changing the borders of the match does
not affect the way :global command works, the pattern is written in
such a manner just to match the needs of the next substitution
command: Since these two commands could share the same pattern, it can
be omitted in the second one.
The command that is run on the matched lines,
:let m=max([m,searchpos(#/,'c')[1]])
calls the searchpos() function to search for the pattern used in the
parent :global command, and to get the column position of the match.
The pattern is referred to as #/ using the last search pattern
register (see :help "/). This takes advantage of the fact that the
:global command updates the / register as soon as it starts
executing. The c flag passed as the second argument in the
searchpos() call allows the match at the first character of a line
(:global positions the cursor at the very beginning of the line to
execute a command on), because it could be that there is no text to
the left of the separator. The searchpos() function returns a list,
the first element of which is the line number of the matched position,
and the second one is the column position. If the command is run on
a line, the line matches the pattern of the containing :global
command. As searchpos() is to look for the same pattern, there is
definitely a match on that line. Therefore, only the column starting
the match is in interest, so it gets extracted from the returning list
by the [1] subscript. This very position equals to the width of the
text in the first column of the line, plus one. Hence, the m variable
is set to the maximum of its current value and that column position.
The second command,
:%s//\=repeat(' ',m-col('.'))
pads the first occurrence of the separator on all of the lines that
contain it, with the number of spaces that is missing to make the text
before the separator to take m characters, minus one. This command
is a global substitution replacing an empty interval just before the
separator (see the comment about the :global command above) with the
result of evaluation of the expression (see :help sub-replace-\=)
repeat(' ',m-col('.'))
The repeat() function repeats its first argument (as string) the
number of times given in the second argument. Since on every
substitution the cursor is moved to the start of the pattern match,
m-col('.') equals exactly to the number of spaces needed to shift
the separator to the right to align columns (col('.') returns the
current column position of the cursor).
1 Below is a one-line version of this pair of commands.
:let m=0|exe'g/\ze -- /let m=max([m,searchpos(#/,"c")[1]])'|%s//\=repeat(' ',m-col('.'))
2 In previous revisions of the answer the commands used
to be as follows.
:let p=[0]|%s/^\ze\(.*\) -- /\=map(p,'max([v:val,len(submatch(1))+1])')[1:0]/
:exe'%s/\ze\%<'.p[0].'c -- /\=repeat(" ",'.p[0].'-col("."))'
Those who are interested in these particular commands can find their
detailed description in this answer’s edit history.
This is a modification on Benoit's answer that has two steps.
First step, block select text search and replace -- with lots of spaces.
'<,'>s/--/ --/
Now all the comments should have lots of spaces, but still be uneven.
Second step, block select the text again and use another regex to match all the characters you want to keep (say the first 20 characters or so) plus all the spaces following, and to replace it with a copy of those first 20 characters:
'<,'>s/\(.\{20}\)\s*/\1/
Not quite as easy as Benoit's, but I couldn't figure out how to make his second step work.