VBA Excel - Function Stuck - excel

I am new ti VBA and i would like to perform a function as follows i hope someone could help me out
I need to set a macro that starts at Cell A2 when i click my function a dialog box appears which i can enter relevant information into and it inserts into the relevant cells
inserts data into 3 fields (B2, C2, D2)
then selects B3 where i can press my button again to do the same thins again
heres my code so far
Dim StartCell As Integer
Private Sub Cancel_Click()
Unload GarageDimensions
End Sub
Private Sub LengthBox_Change()
If LengthBox.Value >= 15 Then
MsgBox "Are you sure? You do realise it is just a garage!"
Exit Sub
End If
End Sub
Private Sub Submit_Click()
'This code tells the text entered into the job reference textbox to be inserted _
into the first cell in the job reference column.
StartCell = Cells(1, 2)
Sheets("Data").Activate
If IsBlankStartCell Then
ActiveCell(1, 1) = JobRef.Text
ActiveCell.Offset(0, 1).Select
ActiveCell(1, 1) = LengthBox.Value
ActiveCell.Offset(0, 1).Select
ActiveCell(1, 1) = ListBox1.Value
ActiveCell.Offset(0, 1).Select
ActiveCell(1, 1) = ListBox1.Value * LengthBox.Value
Else
Range("A1").End(xlDown).Offset(1, 0).Select
End If
Unload GarageDimensions
End Sub
Private Sub UserForm_Initialize()
With ListBox1
.AddItem "2.2"
.AddItem "2.8"
.AddItem "3.4"
End With
ListBox1.ListIndex = 0
End Sub
Thanks for your answers in advance
Adam

You don't need the Private Sub LengthBox_Change() event. You can set the MAX characters of the TextBox LengthBox either in the Design Mode or in the UserForm_Initialize() event as I have done below.
Also if you hard-code the Startcell then every time you run the UserForm the data will start from A2 and if there is any data there, then that will be overwritten. Instead try and find the last available row where you can write.
BTW, is this what you are trying (UNTESTED)?
Option Explicit
Dim StartCell As Integer
Dim ws As Worksheet
Private Sub UserForm_Initialize()
Set ws = Sheets("Data")
With ListBox1
.AddItem "2.2"
.AddItem "2.8"
.AddItem "3.4"
.ListIndex = 0
End With
LengthBox.MaxLength = 14
End Sub
Private Sub Submit_Click()
With ws
'~~> Find the first empty row to write
StartCell = .Range("A" & Rows.Count).End(xlUp).Row + 1
.Range("A" & StartCell).Value = Val(Trim(ListBox1.Value)) _
* Val(Trim(LengthBox.Value))
.Range("B" & StartCell).Value = JobRef.Text
.Range("C" & StartCell).Value = LengthBox.Value
.Range("D" & StartCell).Value = ListBox1.Value
End With
Unload Me
End Sub
Private Sub Cancel_Click()
Set ws = Nothing
Unload Me
End Sub

Related

Delete checkbox from a Specific Cell with VBA

I'm putting together a spreadsheet that should populate checkboxes in a specific column when the spreadsheet opens if the appropriate A Column/Row is not empty. It should also remove checkboxes when it finds that same A column to be empty. My VB is correctly creating the checkboxes, but I cannot figure out how to tell the code to delete the checkbox from a specific cell.
Most articles I find mention removed ALL checkboxes, but I'm looking to do it conditionally. Any guidance would be greatly appreciated.
Private Sub Workbook_Open()
'declare a variable
Dim ws As Worksheet
Set ws = Worksheets("Sheet1")
'calculate if a cell is not blank across a range of cells with a For Loop
For x = 2 To 1000
If ws.Cells(x, 1) <> "" Then
Call Add_CheckBox(CInt(x))
Else
Call Delete_CheckBox(CInt(x))
End If
Next x
End Sub
Private Sub Add_CheckBox(Row As Integer)
ActiveSheet.CheckBoxes.Add(Cells(Row, "T").Left, Cells(Row, "T").Top, 72, 12.75).Select
With Selection
.Caption = ""
.Value = xlOff '
.LinkedCell = "AA" & Row
.Display3DShading = False
End With
End Sub
Private Sub Delete_CheckBox(Row As Integer)
Dim cb As CheckBox
If cb.TopLeftCell.Address = (Row, "T") Then cb.Delete
End Sub
Naming the CheckBoxes will make it easier to maintain your code.
Private Sub Workbook_Open()
Const CheckBoxPrefix As String = "Sheet1TColumnCheckBox"
'declare a variable
Dim CheckBoxName As String
Dim ws As Worksheet
Set ws = Worksheets("Sheet1")
'calculate if a cell is not blank across a range of cells with a For Loop
Dim r As Long
For r = 2 To 1000
CheckBoxName = CheckBoxPrefix & r
If Len(ws.Cells(r, 1)) > 0 Then
If Not WorksheetContainsCheckBox(CheckBoxName, ws) Then Add_CheckBox CheckBoxName, ws.Cells(r, 1), ws.Cells(r, "AA")
Else
If WorksheetContainsCheckBox(CheckBoxName, ws) Then ws.CheckBoxes(CheckBoxName).Delete
End If
Next
End Sub
Private Sub Add_CheckBox(CheckBoxName As String, Cell As Range, LinkedCell As Range)
With Cell.Worksheet.CheckBoxes.Add(Cell.Left, Cell.Top, 72, 12.75)
.Caption = ""
.Value = xlOff '
.LinkedCell = LinkedCell
.Display3DShading = False
.Name = CheckBoxName
End With
End Sub
Function WorksheetContainsCheckBox(CheckBoxName As String, ws As Worksheet)
Dim CheckBox As Object
On Error Resume Next
Set CheckBox = ws.CheckBoxes(CheckBoxName)
WorksheetContainsCheckBox = Err.Number = 0
On Error GoTo 0
End Function
Try something like this (put a checkbox "in" A1 but not C1)
Sub tester()
Debug.Print Delete_CheckBox([A1])
Debug.Print Delete_CheckBox([C1])
End Sub
'Return True if able to delete a checkbox from range `rng`
Private Function Delete_CheckBox(rng As Range) As Boolean
Dim cb As CheckBox
For Each cb In rng.Worksheet.CheckBoxes
If Not Application.Intersect(cb.TopLeftCell, rng) Is Nothing Then
Debug.Print "Deleting checkbox in " & cb.TopLeftCell.Address
cb.Delete
Delete_CheckBox = True
Exit For 'if only expecting one matched checkbox
End If
Next cb
End Function

Edit filtered listbox

Can anyone help me with a solution or a different method for this? I would like to edit the filtered listbox
I'm trying to get a listbox that is able to display my sheet1 and be able to filter all the blanks/not found in column A. I also want to be able to edit the listbox aswell
I would like my userform2 listbox to display the sheet1 information.
There will also be a checkbox which will filter the listbox to show “not found” or blank lines.
If i double click the selected item on the listbox i would like to edit the information
for userform2
Private Sub ListBox2_Click()
TextBox1.Enabled = True
TextBox1.Value = ListBox2.Value
End Sub
Private Sub TextBox1_Change()
Dim rCell As Range
With ListBox2
Set rCell = Range(.RowSource).Resize(1).Offset(.ListIndex)
rCell.Value = TextBox1.Value
End With
End Sub
Private Sub CheckBox1_Click()
OptimizedMode True
If userform2.CheckBox1.Value = True Then
Worksheets("Table").Range("A1").AutoFilter Field:=1, Criteria1:="Not Found", Operator:=xlOr, Criteria2:="="
userform2.ListBox2.RowSource = vbNullString
userform2.ListBox2.ColumnHeads = False
Dim rng As Range
Dim Cel1 As Range
Dim LR As Long
Dim ws As Worksheet
Set ws = Sheets("Table")
With ws
LR = .Cells(.Rows.Count, "A").End(xlUp).Row
Set rng = .Range("A2:A" & LR).SpecialCells(xlCellTypeVisible)
With userform2.ListBox2
.ColumnCount = 1
For Each Cel1 In rng
.AddItem CStr(Cel1.Value)
.List(.ListCount - 1, 1) = Cel1.Offset(0, 1).Value
Next Cel1
End With
End With
End If
If CheckBox1.Value = False Then
With userform2.ListBox2
.RowSource = "Table!A2:A1048576"
End With
End If
OptimizedMode False
End Sub
I've re-designed my code and I believe this will achieve what you are after.
NOTE: This code uses all default object names. You will need to modify it to target the names for your workbook, sheet, useform, controls etc, if you wish to implement into your project.
In designing this answer I used the following:
A new blank Workbook with 1 new Worksheet
A new UserForm (captioned "ListBox Editor") with 1 ListBox that has 2 columns (ColumnCount = 2) and 1 CheckBox (captioned "Show Blanks").
The sample data I used was in Range("A1:A10") filling only odd numbers from row 1. This allows testing for including/excluding blank/empty rows. Screenshots of the Worksheet and UserForm below.
Worksheet data:
UserForms both with and without blanks in the listbox:
All code is written in the code behind module for the UserForm
Most can be written into any other module with calls made to the subs/functions from the UserForm/ListBox events if you'd prefer not to have the working code in the UserForm module.
Code blocks with explanations below (full code block at the end for copy/paste):
Option Explicit
Option Explicit should be included at the top of each and every code module you use. It forces explicit declaration of all variables which helps significantly in avoiding typo's in your code etc.
Private Sub PopulateListBox(ByVal IncludeBlanks As Boolean)
Dim TargetCell As Range
Dim TargetWorksheet As Worksheet
Set TargetWorksheet = ThisWorkbook.Sheets("Sheet1")
With UserForm1.ListBox1
.Clear
For Each TargetCell In TargetWorksheet.Range("A1:A10")
If Not IncludeBlanks Then
If Not TargetCell.Value = "" Then
.AddItem TargetCell.Value
.List(.ListCount - 1, 1) = TargetCell.Row
End If
ElseIf IncludeBlanks Then
.AddItem TargetCell.Value
.List(.ListCount - 1, 1) = TargetCell.Row
End If
Next TargetCell
.ColumnWidths = ";0" 'Hides listbox column that holds row number
End With
End Sub
PopulateListBox is a subroutine I wrote to handle population of the items in the ListBox. It first clears the list, allowing each population of the listbox to be 'refreshed' data. Then it iterates through each TargetCell of the defined Range. If IncludeBlanks is True it has no conditions to meet and adds each cell value into the list, if IncludeBlanks is False it will only add the cell value to the list if the value is not "".
Private Sub CheckBox1_Click()
If Me.CheckBox1.Value = False Then
PopulateListBox False
ElseIf Me.CheckBox1.Value = True Then
PopulateListBox True
End If
End Sub
This _Click event simply updates the ListBox list based on if the CheckBox is checked or not. The CheckBox represents if you are including blanks/empty cells or not so it passes True or False respective to it's Value, to the IncludeBlanks argument in PopulateListBox.
Private Sub ListBox1_DblClick(ByVal Cancel As MSForms.ReturnBoolean)
Dim NewValue As Variant
Dim TargetWorksheet As Worksheet
Set TargetWorksheet = ThisWorkbook.Sheets("Sheet1")
NewValue = InputBox("What is the new value to replace " & UserForm1.ListBox1 & "?")
If Not StrPtr(NewValue) = 0 Then 'Check user did NOT click cancel or [X]
With ListBox1
If NewValue = "" Then NewValue = vbNullString
TargetWorksheet.Cells(.List(.ListIndex, 1), 1).Value = NewValue
.AddItem NewValue, .ListIndex
.RemoveItem .ListIndex
End With
End If
End Sub
The _DblClick Event triggers the code when a list item is double clicked. This code first opens an InputBox to allow the user to enter a new value for the selected listbox item. When the user clicks OK or hit's Enter, the new value is first written to the Cell that the original value came from, then the new value is added as a new list item and finally the previous value is removed. If the user clicks [X] or 'Cancel' the code does nothing.
Private Sub UserForm_Initialize()
PopulateListBox False
End Sub
Much the same as the Checkbox_Change code, this simply populates the ListBox when the UserForm is first initialized. It's written to exclude blanks, specified by False for the IncludeBlanks argument.
Put it all together and you have:
Option Explicit
Private Sub CheckBox1_Click()
If Me.CheckBox1.Value = False Then
PopulateListBox False
ElseIf Me.CheckBox1.Value = True Then
PopulateListBox True
End If
End Sub
Private Sub ListBox1_DblClick(ByVal Cancel As MSForms.ReturnBoolean)
Dim NewValue As Variant
Dim TargetWorksheet As Worksheet
Set TargetWorksheet = ThisWorkbook.Sheets("Sheet1")
NewValue = InputBox("What is the new value to replace " & UserForm1.ListBox1 & "?")
If Not StrPtr(NewValue) = 0 Then 'Check user did NOT click cancel or [X]
With ListBox1
If NewValue = "" Then NewValue = vbNullString
TargetWorksheet.Cells(.List(.ListIndex, 1), 1).Value = NewValue
.AddItem NewValue, .ListIndex
.RemoveItem .ListIndex
End With
End If
End Sub
Private Sub UserForm_Initialize()
PopulateListBox False
End Sub
Private Sub PopulateListBox(ByVal IncludeBlanks As Boolean)
Dim TargetCell As Range
Dim TargetWorksheet As Worksheet
Set TargetWorksheet = ThisWorkbook.Sheets("Sheet1")
With UserForm1.ListBox1
.Clear
For Each TargetCell In Range("A1:A10")
If Not IncludeBlanks Then
If Not TargetCell.Value = "" Then
.AddItem TargetCell.Value
.List(.ListCount - 1, 1) = TargetCell.Row
End If
ElseIf IncludeBlanks Then
.AddItem TargetCell.Value
.List(.ListCount - 1, 1) = TargetCell.Row
End If
Next TargetCell
.ColumnWidths = ";0"
End With
End Sub

Execute Procedure when Value in a Cell/Range Changes

I'm new to VBA and wrote the following codes according to my data set. The goal here is to execute my procedure if a cell/range gets changed by pasting new data into the worksheet, most probably the sheet will be empty as it will follow by a clear content procedure.
However, the code is not triggering the change event, I've tried several codes from Google, but none of them worked. Please note that my procedure gets me exactly the data I want in the format I want, however, if changes are needed, kindly let me know.
PLEASE HELP
1. Change event trigger - stored under Sheet1
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1")) Is Nothing Then
Application.EnableEvents = False
Call LoopandIfStatement
Application.EnableEvents = True
End If
End Sub
2. My procedure - stored under Sheet1 below the event above
Sub LoopandIfStatement()
Dim SHT As Worksheet
Set SHT = ThisWorkbook.Worksheets("CB")
MyLr = SHT.Cells(Rows.Count, 1).End(xlUp).Row
Dim I As Long
For I = 1 To MyLr
Dim O As Long
Dim U As Range
Set U = SHT.Range("A" & I)
If IsEmpty(SHT.Range("a" & I).Value) = False Then
SHT.Range("k" & I).Value = SHT.Range("A" & I).Value
Else
On Error GoTo ABC
SHT.Range("k" & I).Value = U.Offset(-1, 0)
End If
Next I
For O = 2 To MyLr
If SHT.Range("g" & O).Value = "Closing Balance" Then
SHT.Range("l" & O).Value = SHT.Range("j" & O).Value
End If
Next O
ABC:
End Sub
Results
This will trigger whenever new data is pasted in any cell of columns A to J
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A:J")) Is Nothing Then
Application.EnableEvents = False
Call LoopandIfStatement
Application.EnableEvents = True
End If
End Sub
Regarding your sub LoopandIfStatement here are some suggestions:
Use Option explicit at the top of your modules (see this)
Declare all your variables (you're missing: Dim MyLr as long)
Try to name your variables to something understandable (e.g. instead of MyLr you could have lastRow)
If you need to exit a Sub you can use Exit Sub instead of a Goto ABC
EDIT:
Added code for the loop and the change worksheet event.
Paste it behind the CB Sheet module
Some highlights:
When you triggered the loop on each worksheet change, it would re-apply all the steps to all the cells. You can work with changed ranges using the Target argument/variable in the Worksheet_Change event
To loop through an existing range see the AddAccountBalanceToRange procedure
Try to think and plan your code in steps or actions that can be grouped
Use comments to describe the purpose of what you're doing
Remember to delete obsolete code (saw you had a copy of the procedure in a module)
Option Explicit
Private Sub CommandButton1_Click()
ThisWorkbook.Worksheets("Data").Columns("A:J").Copy
ThisWorkbook.Worksheets("CB").Range("A:J").PasteSpecial Paste:=xlPasteValues
End Sub
Private Sub CommandButton2_Click()
ThisWorkbook.Worksheets("CB").Range("A:L").ClearContents
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
Dim targetUsedRange As Range
' Do something on non empty cells
Set targetUsedRange = Intersect(Target, Target.Parent.UsedRange)
If Not Intersect(Target, Me.Range("A:J")) Is Nothing Then
Application.EnableEvents = False
Call AddAccountBalance(targetUsedRange)
Application.EnableEvents = True
End If
End Sub
Private Sub AddAccountBalance(ByVal Target As Range)
Dim targetSheet As Worksheet
Dim evalRow As Range
Dim lastColumn As Long
Dim accountNumber As String
Dim balanceString As String
Dim narrative As String
Dim balanceValue As Long
balanceString = "Closing Balance"
' If deleting or clearing columns
If Target Is Nothing Then Exit Sub
' Do something if there are any values in range
If Application.WorksheetFunction.CountA(Target) = 0 Then Exit Sub
' Get the parent sheet of the cells that were modifid
Set targetSheet = Target.Parent
' Get the last empty cell column in row 1 -Cells(3 -> this is row 3)- In the sample book: column K
lastColumn = targetSheet.Cells(3, targetSheet.Columns.Count).End(xlToLeft).Column
' Loop through each of the rows that were modified in range
For Each evalRow In Target.Cells.Rows
' Do something if account number or narrative are not null
If targetSheet.Cells(evalRow.Row, 1).Value <> vbNullString Or targetSheet.Cells(evalRow.Row, 7).Value <> vbNullString Then
' Store columns values in evaluated row
accountNumber = targetSheet.Cells(evalRow.Row, 1).Value
narrative = targetSheet.Cells(evalRow.Row, 7).Value
If IsNumeric(targetSheet.Cells(evalRow.Row, 10).Value) Then balanceValue = targetSheet.Cells(evalRow.Row, 10).Value
' Add account number
If accountNumber <> vbNullString Then
targetSheet.Cells(evalRow.Row, lastColumn).Value = accountNumber
End If
' Add closing balance
If narrative = balanceString Then
targetSheet.Cells(evalRow.Row, lastColumn).Value = targetSheet.Cells(evalRow.Row, 1).Offset(-1, 0).Value
targetSheet.Cells(evalRow.Row, lastColumn).Offset(0, 1).Value = balanceValue
End If
' Format last two columns (see how the resize property takes a single cell and expands the range)
With targetSheet.Cells(evalRow.Row, lastColumn).Resize(, 2).Interior
.ThemeColor = xlThemeColorAccent6
.TintAndShade = 0.799981688894314
.PatternTintAndShade = 0
End With
' Auto fit last column (K) (you could use the resize property as in the previous statement)
targetSheet.Columns(lastColumn).EntireColumn.AutoFit
End If
Next evalRow
End Sub
Public Sub AddAccountBalanceToRange()
Dim targetSheet As Worksheet
Dim evalRange As Range
Set targetSheet = ThisWorkbook.Worksheets("CB")
Set evalRange = targetSheet.Range("A1:A42")
AddAccountBalance evalRange
End Sub

How to trigger code if Enter key is pressed in a column

I'm trying to move to first cell of next row of column "A" in excel whenever enter key is pressed in Column "H". My code so far is below;
Private Sub move_to_next_row(KeyCode As Integer, Shift As Integer)
If KeyCode = 13 Then
ActiveCell.Offset(1, -7).Activate
End If
End Sub
There is no KeyDown event or something similar for worksheets. You can only check if a cell in column H was changed and then move to the first column in the next row.
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Columns("H")) Is Nothing Then
Me.Cells(Target.Row + 1, "A").Select
End If
End Sub
Not For Points
Another way in case you want to trap the "Enter" key in Col H (irrespective of whether user made a change or not in column H)
Credits:
#Tom for Application.OnKey
#AsUsual for Worksheet_SelectionChange
Place this in the worksheet code area
Option Explicit
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim wsName As String
wsName = ActiveSheet.Name
If ActiveCell.Column = 8 Then Application.OnKey "{Enter}", _
"'MoveCursor" & Chr(34) & wsName & Chr(34) & "'"
End Sub
Place this in the module.
Option Explicit
Sub MoveCursor(wsN As String)
If ActiveWorkbook.Name <> ThisWorkbook.Name Then GoTo CleanExit
If ActiveSheet.Name <> wsN Then GoTo CleanExit
Cells(ActiveCell.Row + 1, 1).Select
CleanExit:
'<~~ Reset the key to avoid undesirable sideeffects!
Application.OnKey "{Enter}"
End Sub
Try this (also gets triggered by the down arrow)
Option Explicit
Private col As Long
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
With Target
If .Column = 8 And col = 8 Then
Cells(.Row, 1).Select
col = 0
Exit Sub
End If
col = .Column
End With
End Sub
In your ThisWorkbook Object place the following
Private Sub Workbook_Open()
Application.OnKey "~", "move_to_next_row"
End Sub
And then run using F5
Then in a normal module place
Sub move_to_next_row()
Dim SelectRng As Range
On Error Resume Next
If ActiveCell.Column = 8 Then
Set SelectRng = ActiveCell.Offset(1, -7)
Else
If Application.MoveAfterReturn Then
Select Case Application.MoveAfterReturnDirection
Case xlToLeft
Set SelectRng = ActiveCell.Offset(0, -1)
Case xlToRight
Set SelectRng = ActiveCell.Offset(0, 1)
Case xlUp
Set SelectRng = ActiveCell.Offset(-1, 0)
Case xlDown
Set SelectRng = ActiveCell.Offset(1, 0)
End Select
End If
End If
On Error GoTo 0
If Not SelectRng Is Nothing Then
SelectRng.Activate
End If
End Sub
Whenever you press the enter key move_to_next_row will be called. If the ActiveCell is in column H it will move the ActiveCell to Column A

Excel vba, display value in a textbox that I fetch from a table

I have a table that ranges from F2 to G230 . The F column is employee number and G column is employee name. Im trying to make a simple program that registers food orders for the employees and exports the data into a table. Everything works fine except when I choose a employee from a drop down list I want the employee number to appear in a textbox.
Here is my whole code:
Private Sub cmdbutton_add_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("listi yfir skráningar")
'find first empty row in database
iRow = ws.Cells.Find(What:="*", SearchOrder:=xlRows, SearchDirection:=xlPrevious, LookIn:=xlValues).Row + 1
'check for a Name number
If Trim(Me.combobox_name.Value) = "" Then
Me.combobox_name.SetFocus
MsgBox "Please complete the form"
Exit Sub
End If
'copy the data to the database
ws.Cells(iRow, 1).Value = Me.textbox_staffnr.Value
ws.Cells(iRow, 2).Value = Me.combobox_name.Value
ws.Cells(iRow, 3).Value = Me.combobox_rettir.Value
ws.Cells(iRow, 4).Value = Me.textbox_verd.Value
ws.Cells(iRow, 5).Value = Me.textbox_dags.Value
MsgBox "Komið :)", vbOKOnly + vbInformation, "Komið"
'clear the data
Me.combobox_name.Value = ""
Me.combobox_name.SetFocus
Unload Me
End Sub
Private Sub Cmdbutton_close_Click()
Unload Me
End Sub
Private Sub ComboBox1_Change()
End Sub
Private Sub combobox_name_Change()
textbox_staffnr.Value = Application.VLookup(Me.combobox_name.Value, Sheet3.Range("F2:G230"), 1, 0)
End Sub
Private Sub combobox_rettir_Change()
textbox_verd.Value = Application.VLookup(Me.combobox_rettir.Value, Sheet3.Range("C2:D23"), 2, 0)
End Sub
Private Sub Name_Click()
End Sub
Private Sub TextBox1_Change()
End Sub
Private Sub textbox_staffnr_Change()
End Sub
Private Sub textbox_verd_Change()
End Sub
Private Sub UserForm_Initialize()
textbox_dags.Value = Format(Date, "dd/mm/yyyy")
End Sub
And here Im getting error:
Private Sub combobox_name_Change()
textbox_staffnr.Value = Application.VLookup(Me.combobox_name.Value, Sheet3.Range("F2:G230"), 1, 0)
End Sub
Please help.
EDIT: From user's comment:
The number is in column 1 and the name is in column 2
In that case, Vlookup won't work, you'll need to use Index/Match, or a Range.Find.Offset. Personally I prefer the Range.Find.Offset while in VBA:
Dim rngFound as Range
Set rngFound = Sheet3.Range("G2:G230").Find(Me.combobox_name.Value, , xlValues, xlWhole)
If not rngFound is Nothing Then textbox_staffnr.Value = rngFound.Offset(0, -1).Text

Resources