Automatic login on Angstrom Linux - linux

What is a clean way to obtain Angstrom Linux to boot up and open the shell without asking to log in?

This simple answer took me hours to find. For those of you who don't have /etc/inittab the following worked for me. In
/etc/systemd/system/getty.target.wants/serial-getty#ttyO2.service
change the line
ExecStart=-/sbin/getty 115200 %I
to
ExecStart=-/sbin/getty -a USERNAME 115200 %I
I partially figured this out on my own from reading about getty in /etc/inittab, which led me to ExecStart on my system, and a quick google search led me to https://unix.stackexchange.com/questions/42359/how-can-i-autologin-to-desktop-with-systemd which gave me the auto-login syntax of /sbin/getty.

I found a nice way to achieve it. This works for me with Angstrom (on a Beagleboard xM Rev C4).
Make sure agetty is installed (/sbin/agetty is the standard location). It should be included in every Linux Angstrom image.
Create a script file in any location, for example /home/root/autologin.sh. Edit it and add the following:
#!/bin/sh
exec /bin/login -f root
Make it executable with the command
chmod a+x autologin.sh
Edit the file /etc/inittab. Comment out (by adding a “#” at the beginning) the following line
1:2345:respawn:/sbin/getty 38400 tty1
and add the following line:
1:2345:respawn:/sbin/agetty -l /home/root/autologin.sh -n 38400 tty1 linux
Hope this helps out there.

My answer is more linux-generic.
Without a start of a getty-process you doesn't have a passwort login. Look at
/etc/inittab
starts here a *getty-process? Remove this line and restart your device.

1:2345:respawn:/bin/login -f root tty1 </dev/tty1 >/dev/tty1 2>&1
change tty1 for your system configuration, ex) ttyO0, ttyS1, etc..

Related

At boot in kubuntu open a shell and run a script

I everybody
after boot if is possible i want to open a shell and run a simple c++ program automatically ! its difficult ?
airone#airone:~$ sudo ./provaccc
[sudo] password for airone:
Reading From : /dev/input/event2 (Sycreader RFID Technology Co., Ltd SYC ID&IC USB Reader)
Ingresso Palestra: SUCCESS
its possible ?
thanks a lot
Well, you can always include it in some of the common "starters", most probably in ~/.bashrc. The one single important thing would be to suppress the stdout prior to putting it over there. You have to adjust its permissions as well, in order not to be asked for the sudo password. With the limited information I have, I presume it should be something like:
chown <user>:<group> airone
chmod 755 provaccc
echo 'bash <full path>/provaccc' > /dev/null >> ~./bashrc
Test it with sourcing ~/.bashrc:
source ~/.bashrc
Of course there could be multiple adjustments, but I am sure you can work these out.

RPI Not Booting because of infinite shell script

so today i was trying to get a shell script(which is an infinite loop) to run on boot in the background of my RaspberryPi's terminal.
I used this command: update-rc.d -f GPIOServer.sh start 4
and then rebooted my pi and after a couple seconds it runs the infinite loop and doesn't boot to the terminal.
i don't know how to cancel the script: ive tried ^C ^Z ^X Esc and i dont want to have to erase all my files etc.
Please help.
There are several options to get a shell without completing the full boot process:
Try switching to a different console for example with CTRL+ALT+F2 (or any other F2-12 key). This will only work if your init script is one of the last scripts to start.
If the ssh server started before your script then you will be able to connect remotely from another computer
Follow Ignacio's recommendation: by taking out the SD card and mounting the SD card on another linux computer and deleting your init script
If you only have a mac or windows machine then you will only be able to edit the boot parition of the SD card. In this case you can modify/add the boot config file cmdline.txt to boot straight into a root terminal. If there is already a cmdline.txt file on the the sd-card then make a backup copy of this file and then simply add init=/bin/bash after the root kernel parameter.
For example, the full line might look something like this:
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p3 init=/bin/bash rootfstype=ext4 elevator=deadline rootwait
If there is no cmdline.txt file on the sd-card then create a new empty text file and just put init=/bin/bash into that file. Your raspberry pi will now boot straight into a root terminal.
Assuming you are not logging in as root. You can try to log in as root and disable the infinite loop for your user's shell.

Having trouble with rc.local scripting

Hello there Stack Exchange,
I'm trying to use a Raspberry Pi to make a sort of Kiosk display unit out of a TV screen. I figured that this would be a simple enough process, write a startup script that actives LXDE, x11vnc and chromium to the page I want and it's done. But unfortunately, I can't seem to get my rc.local script to work exactly as I want it too and I'm not sure why. This is the code I have added to rc.local
su pi -c startx&
su pi -c x11vnc -display :0 -q -usepw -rfbport 5901
su pi -c chromium --kiosk --incognito "http://www.springwater.ca/"
When the machine is booting it will run the startx command but not the x11vnc or chromium commands. Have I missed something here? Or am I going about this the completely wrong way?
Thanks,
Michael
It will take several seconds before the X server loads and is able to accept connections, but with your &, x11vnc and chromium will try and fail immediately.
After the startx line, you could add a simple sleep 30 to give it time to start, or maybe even poll it:
until xwininfo -root -display :0; do sleep 1; done
i use "nodm" (as package in Debian or from here: http://www.enricozini.org/sw/nodm/) on my Raspberry to login my user and start LXDE. Then autostart all needed applications as described here: http://wiki.lxde.org/en/Autostart.
Edit to answer the comment:
In Debian you can configure the user (and other things) in the file /etc/default/nodm.
I have set the parameter:
# User to autologin for
NODM_USER=dashboard
best wishes,
Matthias

How to run a shell script at startup

On an Amazon S3 Linux instance, I have two scripts called start_my_app and stop_my_app which start and stop forever (which in turn runs my Node.js application). I use these scripts to manually start and stop my Node.js application. So far so good.
My problem: I also want to set it up such that start_my_app is run whenever the system boots up. I know that I need to add a file inside init.d and I know how to symlink it to the proper directory within rc.d, but I can't figure out what actually needs to go inside the file that I place in init.d. I'm thinking it should be just one line, like, start_my_app, but that hasn't been working for me.
First create your startup script # /home/user/startup.sh, and make it executable
chmod +x /home/user/startup.sh
Then set a crontab for it:
$ crontab -e
#reboot /home/user/startup.sh
Now your your startup.sh script will run at every start.
The file you put in /etc/init.d/ have to be set to executable with:
chmod +x /etc/init.d/start_my_app
As pointed out by #meetamit, if it still does not run you might have to create a symbolic link to the file in /etc/rc.d/
ln -s /etc/init.d/start_my_app /etc/rc.d/
Please note that on the latest versions of Debian, this will not work as your script will have to be LSB compliant (provide at least the following actions: start, stop, restart, force-reload, and status):
https://wiki.debian.org/LSBInitScripts
As a note, you should always use the absolute path to files in your scripts instead of the relative one, it may solve unexpected issues:
/var/myscripts/start_my_app
Finally, make sure that you included the shebang on top of the file:
#!/bin/sh
A simple approach is to add a line in /etc/rc.local :
/PATH/TO/MY_APP &
or if you want to run the command as a special user :
su - USER_FOOBAR -c /PATH/TO/MY_APP &
(the trailing ampersand backgrounds the process and allows the rc.local to continue executing)
If you want a full init script, debian distro have a template file, so :
cp /etc/init.d/skeleton /etc/init.d/your_app
and adapt it a bit.
This is the way I do it on Red Hat Linux systems.
Put your script in /etc/init.d, owned by root and executable. At the top of the script, you can give a directive for chkconfig. Example, the following script is used to start a Java application as user oracle.
The name of the script is /etc/init.d/apex
#!/bin/bash
# chkconfig: 345 99 10
# Description: auto start apex listener
#
case "$1" in
'start')
su - oracle -c "cd /opt/apex ; java -jar apex.war > logs/apex.log 2>logs/apex_error.log &";;
'stop')
echo "put something to shutdown or kill the process here";;
esac
This says that the script must run at levels 3, 4, and 5, and the priority for start/stop is 99 and 10.
Then, as user root you can use chkconfig to enable or disable the script at startup:
chkconfig --list apex
chkconfig --add apex
And you can use service start/stop apex.
Enter cron using sudo:
sudo crontab -e
Add a command to run upon start up, in this case a script:
#reboot sh /home/user/test.sh
Save:
Press ESC then :x to save and exit, or hit ESC then ZZ (that's shift+zz)
Test Test Test:
Run your test script without cron to make sure it actually works.
Make sure you saved your command in cron, use sudo crontab -e
Reboot the server to confirm it all works sudo #reboot
Just have a line added to your crontab..
Make sure the file is executable:
chmod +x /path_to_you_file/your_file
To edit crontab file:
crontab -e
Line you have to add:
#reboot /path_to_you_file/your_file
That simple!
Another option is to have an #reboot command in your crontab.
Not every version of cron supports this, but if your instance is based on the Amazon Linux AMI then it will work.
Edit the rc.local file using nano or gedit editor and add your scripts in it. File path could be /etc/rc.local or /etc/rc.d/rc.local.
sudo nano /etc/rc.local
This is the edit:
#!/bin/sh
/path-to-your-script/your-scipt-name.sh
once done press ctrl+o to update, pressEnter then ctrl+x.
Make the file executable.
sudo chmod 755 /etc/rc.local
Then initiate the rc-local service to run script during boot.
sudo systemctl start rc-local
You can do it :
chmod +x PATH_TO_YOUR_SCRIPT/start_my_app
then use this command
update-rc.d start_my_app defaults 100
Please see this page on Cyberciti.
Many answers on starting something at boot, but often you want to start it just a little later, because your script depends on e.g. networking. Use at to just add this delay, e.g.:
at now + 1 min -f /path/yourscript
You may add this in /etc/rc.local, but also in cron like:
# crontab -e
#reboot at now + 1 min -f /path/yourscript
Isn't it fun to combine cron and at? Info is in the man page man at.
As for the comments that #reboot may not be widely supported, just try it. I found out that /etc/rc.local has become obsolete on distros that support systemd, such as ubuntu and raspbian.
The absolute easiest method if all you want to run is a simple script, (or anything) is if you have a gui to use system > preferences then startup apps.
just browse to the script you want and there you go. (make script executable)
This simple solution worked for me on an Amazon Linux instance running CentOS.
Edit your /etc/rc.d/rc.local file and put the command there. It is mentioned in this file that it will be executed after all other init scripts. So be careful in that regards. This is how the file looks for me currently.. Last line is the name of my script.
Create your own /init executable
This is not what you want, but it is fun!
Just pick an arbitrary executable file, even a shell script, and boot the kernel with the command line parameter:
init=/path/to/myinit
Towards the end of boot, the Linux kernel runs the first userspace executable at the given path.
Several projects provide popular init executables used by major distros, e.g. systemd, and in most distros init will fork a bunch of processes used in normal system operation.
But we can hijack /init it to run our own minimal scripts to better understand our system.
Here is a minimal reproducible setup: https://github.com/cirosantilli/linux-kernel-module-cheat/tree/f96d4d55c9caa7c0862991025e1291c48c33e3d9/README.md#custom-init
I refered to this blog, always sound a good choice
https://blog.xyzio.com/2016/06/14/setting-up-a-golang-website-to-autorun-on-ubuntu-using-systemd/
vim /lib/systemd/system/gosite.service
Description=A simple go website
ConditionPathExists=/home/user/bin/gosite
[Service]
Restart=always
RestartSec=3
ExecStart=/home/user/bin/gosite
[Install]
WantedBy=multi-user.target
systemctl enable gosite.service
multi ways to finish it:
crontab
rc.local
init.d
systemd
For Debian 9 see https://askubuntu.com/questions/228304/how-do-i-run-a-script-at-start-up. It is helped me. Short version for Debian 9:
add commands (as root) to /etc/rc.local
/path_to_file/filename.sh || exit 1 # Added by me
exit 0
Probably, /path_to_file/filename.sh should be executable (I think so).
In Lubuntu I had to deal with the opposite situation. Skype start running after booting and I found in ~/.config/autostart/ the file skypeforlinux.desktop. The content of the file is as follows:
[Desktop Entry]
Name=Skype for Linux
Comment=Skype Internet Telephony
Exec=/usr/bin/skypeforlinux
Icon=skypeforlinux
Terminal=false
Type=Application
StartupNotify=false
X-GNOME-Autostart-enabled=true
Deleting this file helped me.
Here is a simpler method!
First: write a shell script and save it a .sh
here is an example
#!/bin/bash
Icoff='/home/akbar/keyboardONOFF/icon/Dt6hQ.png'
id=13
fconfig=".keyboard"
echo "disabled" > $fconfig
xinput float $id
notify-send -i $Icoff "Internal Keyboard disabled";
this script will disable the internal keyboard at startup.
Second: Open the application " Startup Application Preferences"
enter image description here
enter image description here
Third: click Add.
fourth: in the NAME section give a name.
fifth: In the command section browse to your .sh .
sixth: edit your command section to:
bash <space> path/to/file/<filename>.sh <space> --start
seventh: click Add. Thats it! Finished!
Now confirm by rebooting your pc.
cheers!
Add your script to /etc/init.d/ directory
Update your rc run-levels:
$ update-rc.d myScript.sh defaults NN where NN is the order in which it should be executed. 99 for example will mean it would be run after 98 and before 100.
Painless, easiest and the most universal method is simply
executing it with ~.bash_profile or ~.profile (if you don't have bash_profile file).
Just add the execution command at the bottom of that file and it will be executed when system started.
I have this one at the bottom an example;
~\Desktop\sound_fixer.sh
Working with Python 3 microservices or shell; using Ubuntu Server 18.04 (Bionic Beaver) or Ubuntu 19.10 (Eoan Ermine) or Ubuntu 18.10 (Cosmic Cuttlefish) I always do like these steps, and it worked always too:
Creating a microservice called p example "brain_microservice1.service" in my case:
$ nano /lib/systemd/system/brain_microservice1.service
Inside this new service that you are in:
[Unit]
Description=brain_microservice_1
After=multi-user.target
[Service]
Type=simple
ExecStart=/usr/bin/python3.7 /root/scriptsPython/RUN_SERVICES/microservices /microservice_1.py -k start -DFOREGROUND
ExecStop=/usr/bin/python3.7 /root/scriptsPython/RUN_SERVICES/microservices/microservice_1.py -k graceful-stop
ExecReload=/usr/bin/python3.7 /root/scriptsPython/RUN_SERVICES/microservices/microservice_1.py -k graceful
PrivateTmp=true
LimitNOFILE=infinity
KillMode=mixed
Restart=on-failure
RestartSec=5s
[Install]
WantedBy=multi-user.target
Give the permissions:
$ chmod -X /lib/systemd/system/brain_microservice*
$ chmod -R 775 /lib/systemd/system/brain_microservice*
Give the execution permission then:
$ systemctl daemon-reload
Enable then, this will make then always start on startup
$ systemctl enable brain_microservice1.service
Then you can test it;
$ sudo reboot now
Finish = SUCCESS!!
This can be done with the same body script to run shell, react ... database startup script ... any kind os code ... hope this help u...
...
For some people, this will work:
You could simply add the following command into System → Preferences → Startup Applications:
bash /full/path/to/your/script.sh

Run script with rc.local: script works, but not at boot

I have a node.js script which need to start at boot and run under the www-data user. During development I always started the script with:
su www-data -c 'node /var/www/php-jobs/manager.js
I saw exactly what happened, the manager.js works now great. Searching SO I found I had to place this in my /etc/rc.local. Also, I learned to point the output to a log file and to append the 2>&1 to "redirect stderr to stdout" and it should be a daemon so the last character is a &.
Finally, my /etc/rc.local looks like this:
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
su www-data -c 'node /var/www/php-jobs/manager.js >> /var/log/php-jobs.log 2>&1 &'
exit 0
If I run this myself (sudo /etc/rc.local): yes, it works! However, if I perform a reboot no node process is running, the /var/log/php-jobs.log does not exist and thus, the manager.js does not work. What is happening?
In this example of a rc.local script I use io redirection at the very first line of execution to my own log file:
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
exec 1>/tmp/rc.local.log 2>&1 # send stdout and stderr from rc.local to a log file
set -x # tell sh to display commands before execution
/opt/stuff/somefancy.error.script.sh
exit 0
On some linux's (Centos & RH, e.g.), /etc/rc.local is initially just a symbolic link to /etc/rc.d/rc.local. On those systems, if the symbolic link is broken, and /etc/rc.local is a separate file, then changes to /etc/rc.local won't get seen at bootup -- the boot process will run the version in /etc/rc.d. (They'll work if one runs /etc/rc.local manually, but won't be run at bootup.)
Sounds like on dimadima's system, they are separate files, but /etc/rc.d/rc.local calls /etc/rc.local
The symbolic link from /etc/rc.local to the 'real' one in /etc/rc.d can get lost if one moves rc.local to a backup directory and copies it back or creates it from scratch, not realizing the original one in /etc was just a symbolic link.
I ended up with upstart, which works fine.
In Ubuntu I noticed there are 2 files. The real one is /etc/init.d/rc.local; it seems the other /etc/rc.local is bogus?
Once I modified the correct one (/etc/init.d/rc.local) it did execute just as expected.
You might also have made it work by specifying the full path to node. Furthermore, when you want to run a shell command as a daemon you should close stdin by adding 1<&- before the &.
I had the same problem (on CentOS 7) and I fixed it by giving execute permissions to /etc/local:
chmod +x /etc/rc.local
if you are using linux on cloud, then usually you don't have chance to touch the real hardware using your hands. so you don't see the configuration interface when booting for the first time, and of course cannot configure it. As a result, the firstboot service will always be in the way to rc.local. The solution is to disable firstboot by doing:
sudo chkconfig firstboot off
if you are not sure why your rc.local does not run, you can always check from /etc/rc.d/rc file because this file will always run and call other subsystems (e.g. rc.local).
I got my script to work by editing /etc/rc.local then issuing the following 3 commands.
sudo mv /filename /etc/init.d/
sudo chmod +x /etc/init.d/filename
sudo update-rc.d filename defaults
Now the script works at boot.
I am using CentOS 7.
$ cd /etc/profile.d
$ vim yourstuffs.sh
Type the following into the yourstuffs.sh script.
type whatever you want here to execute
export LD_LIBRARY_PATH=/usr/local/cuda-7.0/lib64:$LD_LIBRARY_PATH
Save and reboot the OS.
I have used rc.local in the past. But I have learned from my experience that the most reliable way to run your script at the system boot time is is to use #reboot command in crontab. For example:
#reboot path_to_the_start_up_script.sh
This is most probably caused by a missing or incomplete PATH environment variable.
If you provide full absolute paths to your executables (su and node) it will work.
It is my understanding that if you place your script in a certain RUN Level, you should use ln -s to link the script to the level you want it to work in.
first make the script executable using
sudo chmod 755 /path/of/the/file.sh
now add the script in the rc.local
sh /path/of/the/file.sh
before exit 0
in the rc.local,
next make the rc.local to executable with
sudo chmod 755 /etc/rc.local
next to initialize the rc.local use
sudo /etc/init.d/rc.local start
this will initiate the rc.local
now reboot the system.
Done..
I found that because I was using a network-oriented command in my rc.local, sometimes it would fail. I fixed this by putting sleep 3 at the top of my script. I don't know why but it seems when the script is run the network interfaces aren't properly configured or something, and this just allows some time for the DHCP server or something. I don't fully understand but I suppose you could give it a try.
I had exactly same issue, the script was running fine locally but when I reboot/power-on it was not.
I resolved the issue by changing the file path. Basically need to give the complete path in the script. While running locally, file can be accessed but when running on reboot, local path will not be understood.
1 Do not recommend using root to run the apps such as node app.
Well you can do it but may catch more exceptions.
2 The rc.local normally runs as root user.
So if the your script should runs as another user such as www U should make sure the PATH and other environment is ok.
3 I find a easy way to run a service as a user:
sudo -u www -i /the/path/of/your/script
Please prefer the sudo manual~
-i [command]
The -i (simulate initial login) option runs the shell specified by the password database entry of the target user as a loginshell...
rc.local only runs on startup. If you reboot and want the script to execute, it needs to go into the rc.0 file starting with the K99 prefix.

Resources