I have a sed command in my makefile like following ,purpose of the command is, it should replace string "listen $address" to "",but as a result it is replacing "listen $address" to "$address"
sed -i -e "s/listen $$address//" file.txt
Please suggest any solution.
I have checked many posts but there $ is used as regex variable ,in my case it needs to be treated as hardcoded string
Enclose your sed command in single quotes to avoid variable expansion within double quotes:
sed -e -i 's/listen $address//' file
You can use double quotes though by escaping the $:
sed -e -i "s/listen \$address//" file
I want to add the string %%% to the beginning of some specific lines in a text file.
This is my script:
#!/bin/bash
a="c:\Temp"
sed "s/$a/%%%$a/g" <File.txt
And this is my File.txt content:
d:\Temp
c:\Temp
e:\Temp
But nothing changes when I execute it.
I think the 'sed' command is not finding the pattern, possibly due to the \ backslashes in the variable a.
I can find the c:\Temp line if I use grep with -F option (to not interpret strings):
cat File.txt | grep -F "$a"
But sed seems not to implement such '-F` option.
Not working neither:
sed 's/$a/%%%$a/g' <File.txt
sed 's/"$a"/%%%"$a"/g' <File.txt
I have found similar threads about replacing with sed, but they don't refer to variables.
How can I replace the desired lines by using a variable adding them the %%% char string?
EDIT: It would be fine that the $a variable could be entered via parameter when calling the script, so it will be assigned like:
a=$1
Try it like this:
#!/bin/sh
a='c:\\Temp' # single quotes
sed "s/$a/%%%$a/g" <File.txt # double quotes
Output:
Johns-MacBook-Pro:sed jcreasey$ sh x.sh
d:\Temp
e:\Temp
%%%c:\Temp
You need the double slash '\' to escape the '\'.
The single quotes won't expand the variables.
So you escape the slash in single quotes and pass it into the double quotes.
Of course you could also just do this:
#!/bin/sh
sed 's/\(.*Temp\)/%%%&/' <File.txt
If you want to get input from the command line you have to allow for the fact that \ is an escape character there too. So the user needs to type 'c:\\' or the interpreter will just wait for another character. Then once you get it, you will need to escape it again. (printf %q).
#!/bin/sh
b=`printf "%q" $1`
sed "s/\($b\)/%%% &/" < File.txt
The issue you are having has to do with substitution of your variable providing a regular expression looking for a literal c:Temp with the \ interpreted as an escape by the shell. There are a number of workarounds. Seeing the comments and having worked through the possibilities, the following will allow the unquoted entry of the search term:
#!/bin/bash
## validate that needed input is given on the command line
[ -n "$1" -a "$2" ] || {
printf "Error: insufficient input. Usage: %s <term> <file>\n" "${0//*\//}" >&2
exit 1
}
## validate that the filename given is readable
[ -r "$2" ] || {
printf "Error: file not readable '%s'\n" "$2" >&2
exit 1
}
a="$1" # assign a
filenm="$2" # assign filename
## test and fix the search term entered
[[ "$a" =~ '/' ]] || a="${a/:/:\\}" # test if \ removed by shell, if so replace
a="${a/\\/\\\\}" # add second \
sed -e "s/$a/%%%$a/g" "$filenm" # call sed with output to stdout
Usage:
$ bash sedwinpath.sh c:\Temp dat/winpath.txt
d:\Temp
%%%c:\Temp
e:\Temp
Note: This allows both single-quoted or unquoted entry of the dos path search term. To edit in place use sed -i. Additionally, the [[ operator and =~ operator are limited to bash.
I could have sworn the original question said replace, but to append, just as you suggest in the comments. I have updated the code with:
sed -e "s/$a/%%%$a/g" "$filenm"
Which provides the new output:
$ bash sedwinpath.sh c:\Temp dat/winpath.txt
d:\Temp
%%%c:\Temp
e:\Temp
Remember: If you want to edit the file in place use sed -i or sed -i.bak which will edit the actual file (and if -i.bak is given create a backup of the original in originalname.bak). Let me know if that is not what you intended and I'm happy to edit again.
Creating your script with a positional parameter of $1
#!/bin/bash
a="$1"
cat <file path>|sed "s/"$1"/%%%"$1"/g" > "temporary file"
Now whenever you want sed to find "c:\Temp" you need to use your script command line as follows
bash <my executing script> c:\\\\Temp
The first backslash will make bash interpret any backslashes that follows therefore what will be save in variable "a" in your executing script is "c:\\Temp". Now substituting this variable in sed will cause sed to interpret 1 backlash since the first backslash in this variable will cause sed to start interpreting the other backlash.
when you Open your temporary file you will see:
d:\Temp
%%%c:\Temp
e:\Temp
I want to set up a bash alias to grep all logs in a directory automatically; however, to make this user-friendly, I need to escape the periods and add a whitespace boundary so grep won't match too many lines.
First I checked to be sure that I had the right syntax to escape an address...
[mpenning#sasmars daily]$ echo 1.1.1.1 | sed "s/\./\\\\./g"
1\.1\.1\.1
[mpenning#sasmars daily]$
Next I tried to escape a CLI argument... but it's not quite getting me there...
[mpenning#sasmars daily]$ alias tryme='echo `sed "s/$argv[1]/\\\\./g"`'
[mpenning#sasmars daily]$ tryme 1.1.1.1
-> Indefinite hang until I hit cntlc
I realize that echo isn't going to search, but this was a simple test.
What is the simplest way to escape periods in arguments to a bash alias?
What you want is a function, and you can use bash's builtin replacement syntax:
$ function tryme() { echo "${1//./\.}"; }
$ tryme 1.1.1.1
1\.1\.1\.1
$ tryme "also. with ... spaces"
also\. with \.\.\. spaces
This will avoid you from forking a sed process.
According to §6.6 "Aliases" of the Bash Reference Manual:
There is no mechanism for using arguments in the replacement text, as in csh. If arguments are needed, a shell function should be used (see Shell Functions).
Also, sed "s/$argv[1]/\\\\./g" wouldn't really make sense anyway, if it put the argument in the sed pattern rather than in the input string.
So, you would write:
function tryme() {
echo "$(echo "$1" | sed "s/\./\\\\./g")"
}
or, using <<< to pass in the input:
function tryme() {
echo "$(sed "s/\./\\\\./g" <<<"$1")"
}
I'm trying to path a web address to a bash script run under cgi. I search a little and found this link. From what I understood, this line should separate the variable from it's value:
USERNAME=`echo "$QUERY_STRING" | sed -n 's/^.*username=\([^&]*\).*$/\1/p' | sed "s/%20/ /g"
So, reading about sed, I have concluded that this line should be sufficient for my needs:
url='echo "$QUERY_STRING" | sed "s/url=\(.*\)/\1/"'
where the input is
url=www.web.address.com
However, the variable get is the string is:
echo "$QUERY_STRING" | sed "s/url=(.*)/\1/"
if I tried to remove the apostrophes I get an empty variable. Note that if I simply to the echo command I the desired effect.
How can I separate the url value?
You can use parameter expansion and you won't need sed.
echo "${QUERY_STRING##*=}"
To set a variable to that value:
url=${QUERY_STRING##*=}
If I run these commands from a script:
#my.sh
PWD=bla
sed 's/xxx/'$PWD'/'
...
$ ./my.sh
xxx
bla
it is fine.
But, if I run:
#my.sh
sed 's/xxx/'$PWD'/'
...
$ ./my.sh
$ sed: -e expression #1, char 8: Unknown option to `s'
I read in tutorials that to substitute environment variables from shell you need to stop, and 'out quote' the $varname part so that it is not substituted directly, which is what I did, and which works only if the variable is defined immediately before.
How can I get sed to recognize a $var as an environment variable as it is defined in the shell?
Your two examples look identical, which makes problems hard to diagnose. Potential problems:
You may need double quotes, as in sed 's/xxx/'"$PWD"'/'
$PWD may contain a slash, in which case you need to find a character not contained in $PWD to use as a delimiter.
To nail both issues at once, perhaps
sed 's#xxx#'"$PWD"'#'
In addition to Norman Ramsey's answer, I'd like to add that you can double-quote the entire string (which may make the statement more readable and less error prone).
So if you want to search for 'foo' and replace it with the content of $BAR, you can enclose the sed command in double-quotes.
sed 's/foo/$BAR/g'
sed "s/foo/$BAR/g"
In the first, $BAR will not expand correctly while in the second $BAR will expand correctly.
Another easy alternative:
Since $PWD will usually contain a slash /, use | instead of / for the sed statement:
sed -e "s|xxx|$PWD|"
You can use other characters besides "/" in substitution:
sed "s#$1#$2#g" -i FILE
一. bad way: change delimiter
sed 's/xxx/'"$PWD"'/'
sed 's:xxx:'"$PWD"':'
sed 's#xxx#'"$PWD"'#'
maybe those not the final answer,
you can not known what character will occur in $PWD, / : OR #.
if delimiter char in $PWD, they will break the expression
the good way is replace(escape) the special character in $PWD.
二. good way: escape delimiter
for example:
try to replace URL as $url (has : / in content)
x.com:80/aa/bb/aa.js
in string $tmp
URL
A. use / as delimiter
escape / as \/ in var (before use in sed expression)
## step 1: try escape
echo ${url//\//\\/}
x.com:80\/aa\/bb\/aa.js #escape fine
echo ${url//\//\/}
x.com:80/aa/bb/aa.js #escape not success
echo "${url//\//\/}"
x.com:80\/aa\/bb\/aa.js #escape fine, notice `"`
## step 2: do sed
echo $tmp | sed "s/URL/${url//\//\\/}/"
URL
echo $tmp | sed "s/URL/${url//\//\/}/"
URL
OR
B. use : as delimiter (more readable than /)
escape : as \: in var (before use in sed expression)
## step 1: try escape
echo ${url//:/\:}
x.com:80/aa/bb/aa.js #escape not success
echo "${url//:/\:}"
x.com\:80/aa/bb/aa.js #escape fine, notice `"`
## step 2: do sed
echo $tmp | sed "s:URL:${url//:/\:}:g"
x.com:80/aa/bb/aa.js
With your question edit, I see your problem. Let's say the current directory is /home/yourname ... in this case, your command below:
sed 's/xxx/'$PWD'/'
will be expanded to
sed `s/xxx//home/yourname//
which is not valid. You need to put a \ character in front of each / in your $PWD if you want to do this.
Actually, the simplest thing (in GNU sed, at least) is to use a different separator for the sed substitution (s) command. So, instead of s/pattern/'$mypath'/ being expanded to s/pattern//my/path/, which will of course confuse the s command, use s!pattern!'$mypath'!, which will be expanded to s!pattern!/my/path!. I’ve used the bang (!) character (or use anything you like) which avoids the usual, but-by-no-means-your-only-choice forward slash as the separator.
Dealing with VARIABLES within sed
[root#gislab00207 ldom]# echo domainname: None > /tmp/1.txt
[root#gislab00207 ldom]# cat /tmp/1.txt
domainname: None
[root#gislab00207 ldom]# echo ${DOMAIN_NAME}
dcsw-79-98vm.us.oracle.com
[root#gislab00207 ldom]# cat /tmp/1.txt | sed -e 's/domainname: None/domainname: ${DOMAIN_NAME}/g'
--- Below is the result -- very funny.
domainname: ${DOMAIN_NAME}
--- You need to single quote your variable like this ...
[root#gislab00207 ldom]# cat /tmp/1.txt | sed -e 's/domainname: None/domainname: '${DOMAIN_NAME}'/g'
--- The right result is below
domainname: dcsw-79-98vm.us.oracle.com
VAR=8675309
echo "abcde:jhdfj$jhbsfiy/.hghi$jh:12345:dgve::" |\
sed 's/:[0-9]*:/:'$VAR':/1'
where VAR contains what you want to replace the field with
I had similar problem, I had a list and I have to build a SQL script based on template (that contained #INPUT# as element to replace):
for i in LIST
do
awk "sub(/\#INPUT\#/,\"${i}\");" template.sql >> output
done
If your replacement string may contain other sed control characters, then a two-step substitution (first escaping the replacement string) may be what you want:
PWD='/a\1&b$_' # these are problematic for sed
PWD_ESC=$(printf '%s\n' "$PWD" | sed -e 's/[\/&]/\\&/g')
echo 'xxx' | sed "s/xxx/$PWD_ESC/" # now this works as expected
for me to replace some text against the value of an environment variable in a file with sed works only with quota as the following:
sed -i 's/original_value/'"$MY_ENVIRNONMENT_VARIABLE"'/g' myfile.txt
BUT when the value of MY_ENVIRONMENT_VARIABLE contains a URL (ie https://andreas.gr) then the above was not working.
THEN use different delimiter:
sed -i "s|original_value|$MY_ENVIRNONMENT_VARIABLE|g" myfile.txt