In ruby, since it's utf-8 encoded in the system wide. so it's pretty straight forward:
string = "\u7f51\u5740\u4e0d\u80fd\u4e3a\u7a7a"
=>网址不能为空
Anyone can I tell me that how to do this in vim?
If you are wanting to insert Unicode characters, see the utf-8-typing help.
For example, Ctrl-V u7f51 will insert 网.
If you are wanting it in Vim scripts, you can use Unicode escapes in the same way as in Ruby; the command echo "\u7f51\u5740\u4e0d\u80fd\u4e3a\u7a7a" will echo the string you provide in your question.
Being aware of this, Ctrl-R comes into play, with the " and = registers; see the docs for i_CTRL-R and i_CTRL-R_= for more info.
Given the following, with the cursor inside the double-quoted string:
string = "\u7f51\u5740\u4e0d\u80fd\u4e3a\u7a7a"
Apply these keystrokes: ci"Ctrl-R="Ctrl-R""EnterEsc
This will turn it into the following:
string = "网址不能为空"
Try to figure out how it works yourself, but I'll explain more if you can't figure it out.
Related
I've been using the answer to Using visual selection or register for search and replace as follows:
v visually select
y yank
:%s/
Ctrl+r
"
This works fine in most cases. However, if newline characters are part of the visual selection I have to manually replace ^M with \n, first. What am I doing wrong?
What am I doing wrong?
Nothing. It's just Vim being well optimised for some workflows and not for others.
The linked thread actually contains some of the ingredients of the solution to the problem, namely that, after yanking, multiline text needs a bit of massaging if we want to use it for something else than p or P. The massaging is needed because newlines are stored as control characters in the buffer and that's what you get when you yank. But regular expressions don't really like control characters so literal ^#s must be changed into \ns and other characters must be escaped, too, like . or [, because they have a special meaning.
The solution to this problem is thus to write a function that:
escapes what needs to be escaped,
transforms newlines into \ns.
Here is one way to do it (with more intermediary steps than I would do in real life but that's better for demonstration):
function! EscapeRegister(reg)
let raw_text = getreg(a:reg)
let escaped_text = escape(raw_text, '\/.*$^~[]')
return substitute(escaped_text, "\n", '\\n', "g")
endfunction
which you would use like so:
v<motion>
y
:%s/
<C-r>=EscapeRegister(e)<CR>
/foo/g
<CR>
Feel free to call your function ER() or whatever for saving typing.
See :help getreg(), :help escape(), :help substiute(), :help #=.
The function above is fairly low-level and could be composed with other things to make higher-level tools that, for example, could handle everything in the macro above in a couple of keystrokes.
I am working on a sql file with some m4 macro embedded. Since m4 uses apostrophe to mark the start of string literals, it breaks the string highlighting of the file totally. Like
m4_include(`SQLCommon.m4')
I am wondering whether there is any option we can let vim to pair apostrophe with a single quotation mark. I searched on-line but didn't find any answer.
Thanks!
You're going to want to override vim's normal syntax highlighting for sqlString.
I was able to get the behavior I think you're looking for with just this:
:syntax region m4String start=/`/ end=/'/
To achieve nesting, we have to tell vim that a m4 string can contain more of the same:
:syntax region m4String start=/`/ end=/'/ contains=m4String extend
If you'd like to color those strings separately instead of just disrupting the normal highlighting you can separately link to the String highlight group.
:hi link m4String String
I wasn't entirely sure what you were looking for though; if the backtick-apostrophe delimited strings are inside of the normal SQL strings this won't work.
How would you search for the following string in vim?
http://my.url.com/a/b/c
I've tried (a la Very No Magic)
:/\Vhttp://my.url.com/a/b/c
But it gives me:
E492 not an editor command: /\Vhttp://my.url.com/a/b/c
You would think there'd be a simple way to search a string literally... I'm not too interested in slash escaping every slash, or writing a complicated search, because I have to rapidly search different URLs in a text file.
I'm not sure why you get not an editor command since I don't. The simplest way to search without having to escape slashes is to use ? instead, e.g.
:?http://my.url.com/a/b/c
" or since the : is not necessary
?http://my.url.com/a/b/c
This does search in the other direction, so just keep that in mind
another way to search forward (from the position of your cursor) without escaping is use :s command.
you could do:
:%s#http://my.url.com/a/b/c##n
then press n to navigate matched text forward, N backwards
If you want to know how many matches in the buffer, use gn instead of n
note that, I said "without escaping", I was talking about the slash, if you want to do search precisely, you have to escape the period. .. since in regex, . means any char.
Can also set the search register directly.
:let #/='\Vhttp://my.url.com/a/b/c'
Then you can use n and N like normal.
Use MacVim (or GVim). Open the non-regex GUI search using ⌘f (or ctrlf on Windows). This is the recommended way to do a non-regex search in Vim. GUI Vim has many improvements over terminal vim like this one and I would highly suggest using it full time if you aren't already.
Searching in vim is just /, not :/. You can search for that string escaping only the slashes: /http:\/\/my.url.com\/a\/b\/c
I want to search for this:
SELECT * FROM `influencers` WHERE (author_name =
within a log file using vi, I cant figure out how to properly escape this, I have tried:
SELECT * FROM \`influencers\` WHERE \(author_name =
And several similar versions, but no luck
In vim, the only character you need to escape is the *:
/SELECT \* FROM `influencers` WHERE (author_name =
If you're using a different vi variant than vim, you'll need to tell us what you're using.
This should work:
SELECT \* FROM `influencers` WHERE [(]author_name =
EDIT: Seeing Keith's answer, he's right. My square brackets are unnecessary. But I'll leave my answer to make a point: whenever I have regex problems, wrapping questionable characters in square brackets is often a quick fix (and doesn't hurt).
The % key is one of the best features of vim: it lets you jump from { to }, [ to ], and so on.
However, it does not work by default with quotes: Either " or ', probably because the opening and closing quote are the same character, making implementation more difficult.
Thinking a bit more about the problem, I'm convinced that it should be implemented, by counting if the number of preceding quotes is odd or even and jumping to the previous or next quote, accordingly.
Before I try to implement it myself, I'd just like to know if someone already has?
Depending on your reason for needing this, there may be a better way to accomplish what you're looking for. For example, if you have the following code:
foo(bar, "baz quux")
^
and your cursor happens to be at the ^, and you want to replace everything inside the quotes with something else, use ci". This uses the Vim "text objects" to change (c) everything inside (i) the quotes (") and puts you in insert mode like this:
foo(bar, "")
^
Then you can start typing the replacement text. There are many other text objects that are really useful for this kind of shortcut. Learn (and use) one new Vim command per week, and you'll be an expert in no time!
Greg's answer was very useful but i also like the 'f' and 'F' commands that move the cursor forward and backward to the character you press after the command.
So press f" to move to the next " character and F" to move to the previous one.
I have found this technique very useful for going to the start/end of a very long quoted string.
when cursor is inside the string, visually select the whole string using vi" or vi'
go to start/end of the string by pressing o
press escape to exit visual select mode
this actually takes the cursor next to the start/end quote character, but still feels pretty helpful.
Edit
Adding Stefan's excellent comment here which is a better option for anyone who may miss the comment.
If you use va" (and va') then it will actually visually select the quotes itself as well.
– Stefan van den Akker
I'd like to expand on Greg's answer, and introduce the surround.vim plugin.
Suppose that rather than editing the contents of your quotes, you want to modify the " characters themselves. Lets say you want to change from double-quotes to single-quotes.
foo(bar, "baz quux")
^
The surround plugin allows you to change this to
foo(bar, 'baz quux')
^
just by executing the following: cs"' (which reads: "change the surrounding double-quotes to single-quotes").
You could also delete the quote marks simply by running: ds" (which reads: "delete the surrounding double-quotes).
There is a good introduction to the surround plugin here.
I know this question is old but here is a plugin to use % to match the corresponding double quote:
https://github.com/airblade/vim-matchquote