I'm building a presence system for live streaming using Socket.IO with Redis, with load balanced instances.
Everytime the user enters a room, I send to the server a socket.emit('join', roomId) and the server joins the user to the corresponding room.
Every minute, I refresh my dashboard and get all the users connected to the instance by using the redis adapter like this:
io.of('/').adapter.clients([req.params.name], (err, clients) => {
console.log(clients.length); // an array containing all connected socket ids
if (req.query.detail) {
res.send(clients);
} else {
res.send({onlineUsers: clients.length});
}
});
If one of my servers goes down, Redis automatically removes all the connected sockets and refreshes almost instantaneously the number of sockets in that room.
Now the problem:
Whenever the user connects, I call
io.of('/').on('connection', function (socket) {
//.. set user Online in database
});
for setting the user online.
And when the user disconnects I do
io.of('/').on('disconnect', function (socket) {
//... Set user offline
});
The problem is...
If my server goes down for a while, the user will be marked as Online forever.
Seen that I have more than 20k people online, it's almost impossible to send every minute a request to the server update the database with a LastSeen, because this would cause more than 300 writes/sec (I don't think mongodb will handle, will it ?)
Is there any how to solve this problem? Use redis to store some data in case the server goes offline for a while, I recover the last state ? How could that happen?
Is there any solution for this ? Even if socketio retries to reconnect, what if the server goes offline for 1 minute and the user leaves, he'll be online forever.
THANK YOU !
Used
NodeJS, Socket.io
Problem
Imagine there are 2 users U1 & U2, connected to an app via Socket.io. The algorithm is the following:
U1 completely loses Internet connection (ex. switches Internet off)
U2 sends a message to U1.
U1 does not receive the message yet, because the Internet is down
Server detects U1 disconnection by heartbeat timeout
U1 reconnects to socket.io
U1 never receives the message from U2 - it is lost on Step 4 I guess.
Possible explanation
I think I understand why it happens:
on Step 4 Server kills socket instance and the queue of messages to U1 as well
Moreover on Step 5 U1 and Server create new connection (it is not reused), so even if message is still queued, the previous connection is lost anyway.
Need help
How can I prevent this kind of data loss? I have to use hearbeats, because I do not people hang in app forever. Also I must still give a possibility to reconnect, because when I deploy a new version of app I want zero downtime.
P.S. The thing I call "message" is not just a text message I can store in database, but valuable system message, which delivery must be guaranteed, or UI screws up.
Thanks!
Addition 1
I do already have a user account system. Moreover, my application is already complex. Adding offline/online statuses won't help, because I already have this kind of stuff. The problem is different.
Check out step 2. On this step we technically cannot say if U1 goes offline, he just loses connection lets say for 2 seconds, probably because of bad internet. So U2 sends him a message, but U1 doesn't receive it because internet is still down for him (step 3). Step 4 is needed to detect offline users, lets say, the timeout is 60 seconds. Eventually in another 10 seconds internet connection for U1 is up and he reconnects to socket.io. But the message from U2 is lost in space because on server U1 was disconnected by timeout.
That is the problem, I wan't 100% delivery.
Solution
Collect an emit (emit name and data) in {} user, identified by random emitID. Send emit
Confirm the emit on client side (send emit back to server with emitID)
If confirmed - delete object from {} identified by emitID
If user reconnected - check {} for this user and loop through it executing Step 1 for each object in {}
When disconnected or/and connected flush {} for user if necessary
// Server
const pendingEmits = {};
socket.on('reconnection', () => resendAllPendingLimits);
socket.on('confirm', (emitID) => { delete(pendingEmits[emitID]); });
// Client
socket.on('something', () => {
socket.emit('confirm', emitID);
});
Solution 2 (kinda)
Added 1 Feb 2020.
While this is not really a solution for Websockets, someone may still find it handy. We migrated from Websockets to SSE + Ajax. SSE allows you to connect from a client to keep a persistent TCP connection and receive messages from a server in realtime. To send messages from a client to a server - simply use Ajax. There are disadvantages like latency and overhead, but SSE guarantees reliability because it is a TCP connection.
Since we use Express we use this library for SSE https://github.com/dpskvn/express-sse, but you can choose the one that fits you.
SSE is not supported in IE and most Edge versions, so you would need a polyfill: https://github.com/Yaffle/EventSource.
Others have hinted at this in other answers and comments, but the root problem is that Socket.IO is just a delivery mechanism, and you cannot depend on it alone for reliable delivery. The only person who knows for sure that a message has been successfully delivered to the client is the client itself. For this kind of system, I would recommend making the following assertions:
Messages aren't sent directly to clients; instead, they get sent to the server and stored in some kind of data store.
Clients are responsible for asking "what did I miss" when they reconnect, and will query the stored messages in the data store to update their state.
If a message is sent to the server while the recipient client is connected, that message will be sent in real time to the client.
Of course, depending on your application's needs, you can tune pieces of this--for example, you can use, say, a Redis list or sorted set for the messages, and clear them out if you know for a fact a client is up to date.
Here are a couple of examples:
Happy path:
U1 and U2 are both connected to the system.
U2 sends a message to the server that U1 should receive.
The server stores the message in some kind of persistent store, marking it for U1 with some kind of timestamp or sequential ID.
The server sends the message to U1 via Socket.IO.
U1's client confirms (perhaps via a Socket.IO callback) that it received the message.
The server deletes the persisted message from the data store.
Offline path:
U1 looses internet connectivity.
U2 sends a message to the server that U1 should receive.
The server stores the message in some kind of persistent store, marking it for U1 with some kind of timestamp or sequential ID.
The server sends the message to U1 via Socket.IO.
U1's client does not confirm receipt, because they are offline.
Perhaps U2 sends U1 a few more messages; they all get stored in the data store in the same fashion.
When U1 reconnects, it asks the server "The last message I saw was X / I have state X, what did I miss."
The server sends U1 all the messages it missed from the data store based on U1's request
U1's client confirms receipt and the server removes those messages from the data store.
If you absolutely want guaranteed delivery, then it's important to design your system in such a way that being connected doesn't actually matter, and that realtime delivery is simply a bonus; this almost always involves a data store of some kind. As user568109 mentioned in a comment, there are messaging systems that abstract away the storage and delivery of said messages, and it may be worth looking into such a prebuilt solution. (You will likely still have to write the Socket.IO integration yourself.)
If you're not interested in storing the messages in the database, you may be able to get away with storing them in a local array; the server tries to send U1 the message, and stores it in a list of "pending messages" until U1's client confirms that it received it. If the client is offline, then when it comes back it can tell the server "Hey I was disconnected, please send me anything I missed" and the server can iterate through those messages.
Luckily, Socket.IO provides a mechanism that allows a client to "respond" to a message that looks like native JS callbacks. Here is some pseudocode:
// server
pendingMessagesForSocket = [];
function sendMessage(message) {
pendingMessagesForSocket.push(message);
socket.emit('message', message, function() {
pendingMessagesForSocket.remove(message);
}
};
socket.on('reconnection', function(lastKnownMessage) {
// you may want to make sure you resend them in order, or one at a time, etc.
for (message in pendingMessagesForSocket since lastKnownMessage) {
socket.emit('message', message, function() {
pendingMessagesForSocket.remove(message);
}
}
});
// client
socket.on('connection', function() {
if (previouslyConnected) {
socket.emit('reconnection', lastKnownMessage);
} else {
// first connection; any further connections means we disconnected
previouslyConnected = true;
}
});
socket.on('message', function(data, callback) {
// Do something with `data`
lastKnownMessage = data;
callback(); // confirm we received the message
});
This is quite similar to the last suggestion, simply without a persistent data store.
You may also be interested in the concept of event sourcing.
Michelle's answer is pretty much on point, but there are a few other important things to consider. The main question to ask yourself is: "Is there a difference between a user and a socket in my app?" Another way to ask that is "Can each logged in user have more than 1 socket connection at one time?"
In the web world it is probably always a possibility that a single user has multiple socket connections, unless you have specifically put something in place that prevents this. The simplest example of this is if a user has two tabs of the same page open. In these cases you don't care about sending a message/event to the human user just once... you need to send it to each socket instance for that user so that each tab can run it's callbacks to update the ui state. Maybe this isn't a concern for certain applications, but my gut says it would be for most. If this is a concern for you, read on....
To solve this (assuming you are using a database as your persistent storage) you would need 3 tables.
users - which is a 1 to 1 with real people
clients - which represents a "tab" that could have a single connection to a socket server. (any 'user' may have multiple)
messages - a message that needs sent to a client (not a message that needs sent to a user or to a socket)
The users table is optional if your app doesn't require it, but the OP said they have one.
The other thing that needs properly defined is "what is a socket connection?", "When is a socket connection created?", "when is a socket connection reused?". Michelle's psudocode makes it seem like a socket connection can be reused. With Socket.IO, they CANNOT be reused. I've seen be the source of a lot of confusion. There are real life scenarios where Michelle's example does make sense. But I have to imagine those scenarios are rare. What really happens is when a socket connection is lost, that connection, ID, etc will never be reused. So any messages marked for that socket specifically will never be delivered to anyone because when the client who had originally connected, reconnects, they get a completely brand new connection and new ID. This means it's up to you to do something to track clients (rather than sockets or users) across multiple socket connections.
So for a web based example here would be the set of steps I'd recommend:
When a user loads a client (typically a single webpage) that has the potential for creating a socket connection, add a row to the clients database which is linked to their user ID.
When the user actually does connect to the socket server, pass the client ID to the server with the connection request.
The server should validate the user is allowed to connect and the client row in the clients table is available for connection and allow/deny accordingly.
Update the client row with the socket ID generated by Socket.IO.
Send any items in the messages table connected to the client ID. There wouldn't be any on initial connection, but if this was from the client trying to reconnect, there may be some.
Any time a message needs to be sent to that socket, add a row in the messages table which is linked to the client ID you generated (not the socket ID).
Attempt to emit the message and listen for the client with the acknowledgement.
When you get the acknowledgement, delete that item from the messages table.
You may wish to create some logic on the client side that discards duplicate messages sent from the server since this is technically a possibility as some have pointed out.
Then when a client disconnects from the socket server (purposefully or via error), DO NOT delete the client row, just clear out the socket ID at most. This is because that same client could try to reconnect.
When a client tries to reconnect, send the same client ID it sent with the original connection attempt. The server will view this just like an initial connection.
When the client is destroyed (user closes the tab or navigates away), this is when you delete the client row and all messages for this client. This step may be a bit tricky.
Because the last step is tricky (at least it used to be, I haven't done anything like that in a long time), and because there are cases like power loss where the client will disconnect without cleaning up the client row and never tries to reconnect with that same client row - you probably want to have something that runs periodically to cleanup any stale client and message rows. Or, you can just permanently store all clients and messages forever and just mark their state appropriately.
So just to be clear, in cases where one user has two tabs open, you will be adding two identical message to the messages table each marked for a different client because your server needs to know if each client received them, not just each user.
As already written in another answer, I also believe you should look at the realtime as a bonus : the system should be able to work also with no realtime.
I’m developing an enterprise chat for a large company (ios, android, web frontend and .net core + postGres backend) and after having developed a way for the websocket to re-establish connection (through a socket uuid) and get undelivered messages (stored in a queue) I understood there was a better solution: resync via rest API.
Basically I ended up by using websocket just for realtime, with an integer tag on each realtime message (user online, typers, chat message and so on) for monitoring lost messages.
When the client gets an id which is not monolithic (+1) then it understands it is out of sync so it drops all the socket messages and asks a resync of all its observers through REST api.
This way we can handle many variations in the state of the application during the offline period without having to parse tons of websocket messages in a row on reconnection and we are sure to be synced (because the last sync date is set just by the REST api, not from the socket).
The only tricky part is monitoring for realtime messages from the moment you call REST api to the moment the server replies because what is read from the db takes time to get back to the client and in the meanwhile variations could happen so they need to be cached and took into account.
We are going into production in a couple of months,
I hope to get back sleeping by then :)
It is seem that you already have user account system. You know which account is online/offline, you you can handle connect/disconnect event:
So the solution is, add online/offline and offline messages on database for each user:
chatApp.onLogin(function (user) {
user.readOfflineMessage(function (msgs) {
user.sendOfflineMessage(msgs, function (err) {
if (!err) user.clearOfflineMessage();
});
})
});
chatApp.onMessage(function (fromUser, toUser, msg) {
if (user.isOnline()) {
toUser.sendMessage(msg, function (err) {
// alert CAN NOT SEND, RETRY?
});
} else {
toUser.addToOfflineQueue(msg);
}
})
Look here: Handle browser reload socket.io.
I think you could use solution which I came up with. If you modify it properly, it should work as you want.
What I think you want is to have a reusable socket for each user, something like:
Client:
socket.on("msg", function(){
socket.send("msg-conf");
});
Server:
// Add this socket property to all users, with your existing user system
user.socket = {
messages:[],
io:null
}
user.send = function(msg){ // Call this method to send a message
if(this.socket.io){ // this.io will be set to null when dissconnected
// Wait For Confirmation that message was sent.
var hasconf = false;
this.socket.io.on("msg-conf", function(data){
// Expect the client to emit "msg-conf"
hasconf = true;
});
// send the message
this.socket.io.send("msg", msg); // if connected, call socket.io's send method
setTimeout(function(){
if(!hasconf){
this.socket = null; // If the client did not respond, mark them as offline.
this.socket.messages.push(msg); // Add it to the queue
}
}, 60 * 1000); // Make sure this is the same as your timeout.
} else {
this.socket.messages.push(msg); // Otherwise, it's offline. Add it to the message queue
}
}
user.flush = function(){ // Call this when user comes back online
for(var msg in this.socket.messages){ // For every message in the queue, send it.
this.send(msg);
}
}
// Make Sure this runs whenever the user gets logged in/comes online
user.onconnect = function(socket){
this.socket.io = socket; // Set the socket.io socket
this.flush(); // Send all messages that are waiting
}
// Make sure this is called when the user disconnects/logs out
user.disconnect = function(){
self.socket.io = null; // Set the socket to null, so any messages are queued not send.
}
Then the socket queue is preserved between disconnects.
Make sure it saves each users socket property to the database and make the methods part of your user prototype. The database does not matter, just save it however you have been saving your users.
This will avoid the problem mentioned in Additon 1 by requiring a confirmation from the client before marking the message as sent. If you really wanted to, you could give each message an id and have the client send the message id to msg-conf, then check it.
In this example, user is the template user that all users are copied from, or like the user prototype.
Note: This has not been tested.
Been looking at this stuff latterly and think different path might be better.
Try looking at Azure Service bus, ques and topic take care of the off line states.
The message wait for user to come back and then they get the message.
Is a cost to run a queue but its like $0.05 per million operations for a basic queue so cost of dev would be more from hours work need to write a queuing system.
https://azure.microsoft.com/en-us/pricing/details/service-bus/
And azure bus has libraries and examples for PHP, C#, Xarmin, Anjular, Java Script etc.
So server send message and does not need to worry about tracking them.
Client can use message to send back also as means can handle load balancing if needed.
Try this emit chat list
io.on('connect', onConnect);
function onConnect(socket){
// sending to the client
socket.emit('hello', 'can you hear me?', 1, 2, 'abc');
// sending to all clients except sender
socket.broadcast.emit('broadcast', 'hello friends!');
// sending to all clients in 'game' room except sender
socket.to('game').emit('nice game', "let's play a game");
// sending to all clients in 'game1' and/or in 'game2' room, except sender
socket.to('game1').to('game2').emit('nice game', "let's play a game (too)");
// sending to all clients in 'game' room, including sender
io.in('game').emit('big-announcement', 'the game will start soon');
// sending to all clients in namespace 'myNamespace', including sender
io.of('myNamespace').emit('bigger-announcement', 'the tournament will start soon');
// sending to individual socketid (private message)
socket.to(<socketid>).emit('hey', 'I just met you');
// sending with acknowledgement
socket.emit('question', 'do you think so?', function (answer) {});
// sending without compression
socket.compress(false).emit('uncompressed', "that's rough");
// sending a message that might be dropped if the client is not ready to receive messages
socket.volatile.emit('maybe', 'do you really need it?');
// sending to all clients on this node (when using multiple nodes)
io.local.emit('hi', 'my lovely babies');
};
I am developing a chat application using socket.io for iOS app and androdi app. And the issue am facing is when network connection is suddenly lost on client, it takes 25 secs(default heartbeat interval) for the disconnect event on the socket.io server to get called. I am removing the socket.id/username from my db when the disconnect event is called. But since during this 25 secs the socket.id/username still exists on my db, when some other user sends a message to this user who lost network connection, it will be shown as sent even though it was never delivered. The solution would probably be to reduce the Heartbeat interval to maybe 1 or 2 secs. I have tried that but strangely its not being set, it still takes 25 secs approx. Below is my code
var app = require('express')()
, server = require('http').createServer(app)
, sio = require('socket.io')
, redis = require('redis');
var client = redis.createClient();
var io = sio.listen(server, { origins: '*:*' });
io.set("store", new sio.RedisStore);
io.set("heartbeat interval", 2);
var azure = require('azure');
server.listen(4002);
But even if i get the heartbeat interval set to 2secs, i think there might be a downside to it. If the mobile apps send acknowledgement to the server's heartbeat every 2secs then taht would probably drain the app's battery if the app is left idle for a long time. So I would appreciate any solutions at all that would work best in my case.
Thanks
there are many variables to consider, when to disconnect a client , since 25secs is a way to small interval to check something especially if you application has say 100.000 users.
Things you could try
client side control, to see if a user is typing or even touching the device to get user status idle|active|zombie.
don't remove user from redis, immediately after client emit disconnect, instead you could place the user , into a toDisconnect queue list, or set an additional variable, if the same user is connected again then you can simply move the object, instead of querying again for creating the object.
if still not satisfied with result, try binary websockets, at least it will remove some overhead from packets and they will be delivered a bit faster, since the size is a smaller.
bottom line, don't rely on redis, you could easily remove it from structure, and apply a custom websocket server, and all user management build in node.js
I want to run some code when a a socket is closed but only if the user didn't reload the page...
I have something like
socket.on("close", function() {
//do something here
});
The problem is that this function runs during a reload event as well...Can I somehow pause it to run at a later time with the value at that later time. I tried just using a set timeout within the callback but couldn't access the socket object anymore from within the callback.
Whats the best way to prevent the function from running if a socket connection is regained shortly after?
the main concept of my thought, is that you can never know that a user is reloading or disconnecting and never come back for 1day or so , there are ways to detect that the browser is navigating away from the website, but cant know (in server side) that it will go to the same address, or different..
Instead if any clients disconnect, of course the disconnect event will be fired to socket.io server for that socket, so taking that in account you can set a Session Variable to false you can say that the player is "disconnected" so when the client of that session "reconnects" aka reloads , the socket.io will fire an "connection" event, BUT reading the session variable you can say that the client has previously disconnected and then connected again. Timestamps could apply to this so a reconnection after 15min would have to load some extra data etc..
So you can try this with sessions (assuming that you use express or something)
sockets.on("connection",function(socket){
if(session.isAReload){
// this is a reconnection
}
socket.set("isAReload",session.isAReload /*defaults to false*/);
});
sockets.on('close',function(){
socket.get('isAReload',function(err,isAReload){
if(isAReload){
// closed after reconnecting
}else{
/*
just closed connection, so next time it will be a "reload" or reconnection
a timer of lets say 30s could run to ensure that the client is reloading
*/
session.isAReload=true;
}
});
})