I think I must have changed something to IIS default website settings. Now I cannot even browse IIS default website. Even if I create new website, when I browse, it always go to http://localhost/webpages/home.aspx which became the default page for all website I added to IIS. where can I change that setting not to call that http://localhost/webpages/home.aspx by default.
any pointer would be appreciated.
if I understand your question correctly.
These steps should help you to produce the result(s) you require:
1 Create your project in VS.
2 Right click Project name.
3 Select Properties.
4 Select Web.
5 Under Server there is a dropdownbox. Here the default is IIS.
dropdownbox
The usual choice as far as I know is between IIS and localhost.
6 Click the Create Virtual Directory button located to the right.
A message box should pop up saying Virtual Directory successfully created!
Here is a link that may be more helpful. https://www.youtube.com/watch?v=k5RKfOEpOGk&index=9&list=PL6n9fhu94yhXQS_p1i-HLIftB9Y7Vnxlo
I'm working with IIS 6.0 and ASP CLASSIC.
My point is to upload file (PDF) and I know there's a limit (200kb by default) but I want to know the max limit of uploaded files (the limit of the server) with a server variable maybe or a conf. file which I can access with asp. I don't want to write the limit in octets directly in my code.
Is that possible ?
I checked IIS Server Variables on the Microsoft Website and found nothing.
Maybe there is no solution to this problem but if someone got one, let me know.
Thanks.
Try increasing the size of the setting "Maximum Requesting Entity Body Limit" under ASP > Limits Properties.
I am trying to install IIS on my Windows 8.1 laptop and followed the directions at Microsoft for installing IIS. But when I type localhost, instead of getting the IIS start page, I get a blank page.
When I do Windows + R and type services.msc, the resulting list of services is long but does not include Internet Information Services.
When I look at the Windows filesystem, I do find the inetpub folder with four subfolders, including wwwroot. In the wwwroot folder is the iisstart.htm file that is supposed to display when I type localhost into my browser.
I have read that one possible problem is that both Skype and IIS want to use Port 80 and there is a conflict. So I decided to try to change the default port for IIS, but I found that I don't appear to have the IIS Manager on my system. When I go to Administrative Tools, Internet Information Services Manager is not on the list of administrative tools.
I added both the HTTP Redirection module as well as the IIS Management Service on top of the initial basic installation that Microsoft described. Still no luck getting IIS working or IIS Manager to appear.
I have tried to research this problem of getting IIS to work on Windows 8.1 with no success and am at a loss. Suggestions welcome!
In Control Panel --> Programs --> Programs And Features --> Turn Windows features on or off -> Internet Information Services -> World Wide Web Services -> Common HTTP Features -> Static Content.
Also make sure .NET Extensibility 3.5 and .NET Extensibility 4.5 are checked.
Major fail by Microsoft. Why the hell would they turn off the most basic features by default. Go to Turn Windows features on or off (just search "features"). Look in IIS, WWW, Common HTTP Features. See attached image.screenshot
I have solved a couple of my problems.
I installed several more IIS modules: Static Content, IIS Management Console, and HTTP Errors.
I am now am able to find the IIS Manager in the Administrative Tools list and can use the IIS Manager.
Also, when I pressed Windows key + R and typed in services.msc, I still don't see Internet Information Services in the list. However, I do see "World Wide Web Publishing Service" in the list and it is shown as running. A page at Microsoft's Technet site indicates that it is related to IIS.
The HTTP Errors module gave me an error page rather than a blank page when I typed in localhost and also when I typed localhost/filename. This proved a HUGE help, because the error page identified the problem as a permissions issue. I thought I had dealt with the permissions issues, but this error page made it apparent that I had not.
When I typed in localhost, I got the permissions error. When I typed in localhost/iisstart.htm, I got the proper display of the file. When I created a simple .htm file, statictest.htm, and placed it in the wwwroot folder along with iisstart.htm, and typed localhost/statictest.htm, I got the permissions error.
So since one of the files was working and one wasn't, I decided to compare their permissions. (You do this using the File Explorer. Right click on the file, click on Properties, click on Security Tab. To make changes, click on Edit.) I saw that the successful one had a user listed that the unsuccessful one did not. So I added a user for the statictest.htm file to the permissions list with full control. That solved the issue for that file and it displayed normally.
I now am back to getting a blank page when I type in localhost. It must not be a permissions issue, because otherwise I'd get the permissions error page. I'm not sure what the cause of the blank page is. But as long as I can get files to display when I give their name, I am happy enough.
I am happy to report that my PHP installation is also working, at least as judged by the fact that the phpinfo() function displays properly.
So to sum up: if you are having problems getting IIS to work on Windows 8.1, try adding more IIS modules and make sure your permissions are in order. I think the most important ones to add are Static Content and HTTP Errors. Also, of course, CGI if you are going to use PHP.
I know this is an older post, but in case anyone, like me, already had "static content" enabled, there was one other thing that needed to be done to resolve this issue.
Under "Programs and Features" -> "Turn Windows features on or off"
Expand "Internet Information Services" -> "World Wide Web Services" -> "Application Development Features"
Make sure that "ASP.NET 4.5" (and if needed/installed 3.5) are selected. This should automatically check ".Net Extensibility" for the selected version, and it should also enable ISAPI filters and Extensions.
By default (for me at least) these options were not turned on when I enabled IIS. I was getting a 500 error in IE if I had "Show Friendly Error Messages" turned on in IE, but if I turned that option off, I would get a completely blank page.
For me, the reason was that I had two different HTTP handlers in the config with the same name. I didn't get any errors, just blank response.
I'm guessing that some other parts of the configuration may result in a similar behavior. Try commenting out some parts of Web.config file in case you cannot figure the problem out.
Same issue.
Win 10 upgraded from 7. Default documents server blank and without error.
Static Content and Default Document features already enabled.
I resolved by disabling both features, rebooted and tried(received error 404), enabled both features, rebooted, pages served properly.
For me, I was using Windows Server 2008 on an Azure machine, it was missing some packages which can be installed using "Web Platform Installer", and then search for "recommended server configuration for web hosting providers"
I encountered the blank page problem as well on IIS 8.5 on Windows Server 2012 R2.
I had StaticContent installed as Windows feature.
What finally fixed it for me was changing the Path Type of the StaticFile Handler under [IIS Manager -> Server on left pane -> Handler Mappings -> StaticFile] from "Unspecified" to "File or Folder".
You can also change this on a per web site basis instead of the entire server (but I don't really see a reason why to do so, as it breaks pretty much any page). Make sure, however, that the site does not have an overriding setting for the StaticFile handler, as the site scoped one is preferred over the global one.
I am trying to add a .net application to my Default Web Site on IIS 7.5 Windows Server 2008 R2. The Default Web Site currently serves ASP Classic pages (not sure if that is relevant) and I'm trying to setup some aspx pages. But I can't even add a new application, i keep getting an error of
"value does not fall within range"
I have no idea what this means?
Please see my screenshot for more information:
http://i.imgur.com/nsUs5.png
Thanks in advance.
Although quite tedious, you could try checking the settings in the apphost config file. You can find it at C:\Windows\System32\inetsrv\config
Look for errors in names, sometimes spaces can be replaced with %20% by Visual Studio which should be removed, also if you have deleted something manually in your file system, this will not have been updated in the applicationhost config file, so any references would need to be removed manually also.
Regards, and good luck
Well i never found a solution apart from Creating the App as ASP Classic (which would allow me too do it) and then switching the AppPool to DefaultAppPool which in turn lets me server ASPX pages.
So, Kind of solved for now...
I wonder what the best approach is for a situation where I want to have the user type in
http://myserver/something/20
and get redirected (301 or 302) to
http://someotherserver/applications/something/modules/default.aspx?id=20
For .net 3.5 and IIS 7 I found some solutions, but unfortunately I am stuck with .net 3.0 and IIS 6.0 on Windows 2003, and I do not want to install anything on the server if possible. I can change the settings for the Virtual Directory though, and if I have to for the entire site.
HTTPModules and web.config are ASP.net only If I am not completely mistaken, hence that will not help as /20 is not sent to ASP.net per Default?
Can anyone give me some tips where I can set up something like that?
The only way I have seen to do it without putting the 301 redirects directly into IIS Manager is to use Wildcard mapping
Link
Map the .* extension to the same DLL as .aspx in the virtual directory's file mappings in Application Configuration. Then in the web.config's httpHandlers section, map the URL to the type.
You might enlist the assistance of ASP.
Create a 404.asp file in your something folder with the content:-
<%
Dim id : id = CLng(Mid(Request.QueryString, InStrRev(Request.QueryString, "/")+1))
Response.Redirect "http://someotherserver/applications/something/modules/default.aspx? id=" & id
%>
In Custom errors of the something folder in IIS manager tweak to URL and /something/404.asp
Note the querystring value passed to the 404 customer error page looks like:-
404;http://myserver:80/something/20
Edit: D'oh or you could use a 404.ashx custom error page and then use more familiar .NET code.
In IIS, right click on the Virtual Directory, select Properties.
Under the Directory tab, click the Configuration... button.
Under the Mappings tab, under the Wildcard application maps (order of implementation): click the Insert... button.
Browse and select C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll, leave Verify that the file exists unchecked.
Move Up aspnet_isapi.dll to the top of the list.
Click Ok, Ok, and try it. Try recycling the application pool if you don't see it work.
We had a situation where the .Net Routing was working on our development PCs but not on the test and production server with IIS 6 and Windows 2003. This fixed our problem.