now i am dealing with the device driver coding. As the part of development, need to explore with the workqueues and work_struct.
i got only few reference for this.
html">http://www.hackchina.com/en/r/119579/jiq.c_html
The above link shows a c code jiq.c . From this not getting much idea about how the calls are flowing inside the driver code. I want to get a good idea about workqueues and work_struct .
Can anyone suggest some documents ?.
thanks in advance.
Here are a few I could get hold of -
You can start of here.
This is about the workqueue interface in Kernel 2.6 by Robert Love
This one from IBM Developer Works explains tasklets in addition to work queues and has sample examples!
Related
In the old days you would look at finding the base addr, DMA and IRQ to communicate with a device. I'm kinda looking for the equiviant.
I'm looking to communicate directly with an audio device, not through a driver, in Linux. Time isn't an issue, but I am struggling to find the information that I need and I know there is a possibility of needing a lot of code, that's fine.
I was wondering if anyone could point me in the right direction to achieving this.
Thankyou very much.
As far as I was aware you couldn't use IRQs or DMA if you're in a user-mode process from linux and this guide (heading 3) seems to confirm that, however after checking I managed to find this Linux driver (udmabuf) that lets you access DMA buffers through the user space; maybe this is what you are looking for?
Otherwise I would mabye try and write a similar, but more customized version of (udmabuf), specific to your purpose.
I'm not sure entirely what you are planning on using it for, but the first thing I would look for is building a driver for what you wanted to do (here's how to get started for ALSA just as an example). At least to communicate at this level, unless you wanted to do some of your own OS development? (I think this would be the way in the end if you really couldn't use drivers for whatever purpose)
I feel bad by answering this myself, WoodyDev, thankyou for pointing me in the right direction.
You are right, a driver is the best way to go.
The best solution is to read the PCI Address Space, the first 64 bytes contain all the data needed.
https://www.safaribooksonline.com/library/view/linux-device-drivers/0596000081/ch15.html
I am looking forward to learn writing a typical linux device driver. Can anyone guide me how can i learn all the aspects of a typical linux device driver ? The examples i see on internet are way too simple, they just send a "hello world" msg from user space to kernel driver module, and echo back "hello". I want to touch almost all areas in a simple way, one would face in writing a real world driver. Would i need to have a real hardware to go forward to meet my requirement ? Cannot system's memory simulate the hardware peripheral and let me treat it as a hardware and control it vie kernel driver covering good set of operations ? Any examples/guidance for this ?
Take a look at the following example of network driver. It uses QEMU for development and testing.
http://www.codeproject.com/Articles/1087177/Linux-Ethernet-Driver-using-Qemu
Sample drivers usually don't control real hardware. The QEMU answer mentioned here is a good exception I guess.
It depends what type of driver you want to focus on. Most classes of drivers distributed with the kernel have some simpler drivers you can learn from. Nbd for example is great for block subsystem and loop devices:
https://github.com/torvalds/linux/blob/c05c2ec96bb8b7310da1055c7b9d786a3ec6dc0c/drivers/block/nbd.c
Look at the smallest file sizes in a drivers/xyz directory and go up until the code is too complex.
I am a complete newbie to operating system and aiming to write my own kernel.
I understand that i will have to write my own device drivers as well.
How do i start with writing my driver?
The tasks of project are as follows.
1.Defining GDT in assembly language
2.Creating boot sector
3.Interrupt handling
4.Screen Driver
5.Keyboard driver
6.Hard disk driver
7.File system
8.I/O programming
9.Physical memory management
Also is it possible to do this in 3 months ( team of 2 )
As you know (or about to find out) OSes are extremely complicated and interconnected. For example, how are you going to have a working Keyboard driver before you have implemented interrupt handling?
It sounds like your question actually is: "How do I start writing my own OS?" You start by reading "Required Knowledge," "Beginner Mistakes," and "Getting Started" on osdev.
Good luck, and it is going to take a long time... especially if you are learning as you go (which is okay, since your goal is learning and not to make a commercial OS).
Edit: Modifying the Linux kernel is a good way to learn about the internals of an OS. It will let you focus on individual aspects (such as just writing a keyboard driver) and your work environment will be sane. Depending on what you want to do, you will be able to further ease development by creating a kernel module instead directly modifying the kernel.
Define your project and its scope
Set up your work environment (my suggestion, run Ubuntu Server in QEMU)
Learn how to either boot a custom kernel or use the module system
Get to work!
You can try looking into contributing to minix (http://www.minix3.org/)
There are a loads of things that are needed to be done .Have a look at (http://wiki.minix3.org/Wishlist).
I'm working an a system with embedded Linux (Kernel 2.6.31).
It is a AT91SAM9G20 chip inside, and some of the Pins are forwarded to the outside.
Now I want to use them as GPIO Inputs.
I read the gpio.txt documentation about using the GPIOs via filesystem, and that works very well 'til here. I connected some switches to the gpio-pins and I can see the result in /sys/class/gpio/gpioX/value. But now I'd like to react on a change without busy-waiting in a loop. (i.e echo "Switch1 was pressed").
I guess I need interrupts here, but I couldn't find out how to use them without writing my own kernel driver. I'm relatively new to Linux and C (I normally program in Java), so I'd like to handle the Interrupts via sysfs too. But my problem is, that there is no "edge"-file in my GPIO directory (I guess because this is only since Kernel version 2.6.33+). Is that right? Instead of "edge" I've got a uevent file in there, which is not described in gpio.txt.
In the gpio.txt documentation there was a Standard Kernel Driver mentioned: "gpio_keys". Is it possible to use this for my problem?
I guess it would be better to work with this driver than allowing a userspace program to manipulate kernel tasks.
I found a lot of codesnippets for writing my own driver, but I wasn't even able to find out which of the 600 gpio.h files to include, and how to refer to the library (cross compiler couldn't find the gpio.h file).
Sorry for newbie questions, I hope you could give me some advices.
Thanks in advance
See this for an example on how to do that. Basically, the thing you're missing is the usage of the select or poll system calls.
i have to find out a memory leak issue on windows ce 4.0/5.0 device. Is there any tool which shows me the all the processes info, like memory, handle count... So that i can identify the culprit process.
If there are any memory leak detection tools for CE 4.0/5.0?
Thanks
http://www.vttoth.com/LPK/taskmanager.html
This is kind of old, but might still work.
The best tool, by a very long margin, for this is Entrek's CodeSnitch.
Have a look at this article. Provided that the Toolhelp32 library is available in your device, you could easily write code that enumerates processes and memory.
acbTaskMan works like a charm for me. The free version does not show per-process information, but paid version is not too expensive.
How about PocketPC Process Explorer - it's free and offers several cool features.
This one is free and works like a charm: ITaskMgr