Ok, first of; here's what I did:
Install AZURE tools
Reboot
Start Visual Studio - new Azure project
Add web role (asp.net MVC 4 beta web role)
Hit F5 (debug)
It starts up the storage emulator and the compute emulator and starts to load in runtimes, and then I get a popup saying that the debugger couldn't connect.
Then after some googeling I'm suggested to try to run the application without running the debugger to see if I can acces the application. When I do I get this:
So I figure that IIS does not have permissions to access some file/directory. So I go to IIS and look up the application pool running the app, and it tells me that the identity in use is NetworkService, then I go give NetworkService full permissions to the entirety of the folder IIS has set for the application (which also happens to be the path to the project dir). Still I get the same error. Now I'm more or less out of ideas, but I try one last thing, which is to also give IUSR full permissions to the same dir, but this did not help either.
How can I go about resolving this problem? I haven't tried actually launching my project to Azure yet, cause if I can't even get it to work in development I don't see much point. Any and all help would be appreciated.
I ran into the same error today after uninstalling .NET 4.5/Visual Studio 11 Dev Preview, then installing ASP.NET MVC 4 Beta (this is before Feb 29th when the updated VS 2011 Preview drops).
Since I uninstalled .net 4.5, you just need to do an "aspnet_regiis -i" to ensure the .net framework (4.0) is set up with IIS 7.x this worked for me.
Edit: This will work if you uninstall/then manually install Visual Studio 2012 RTM as well.
I had a similar error yesterday. For me the problem was that the output of the build was empty in the target folder.
I tried to answer a similar question https://stackoverflow.com/a/9411422/182371:
Check %UserProfile%\AppData\Local\dftmp\IISConfiguratorLogs\IISConfigurator.log
file for the error messages. Mode details at
https://stackoverflow.com/a/8432621/182371
Make sure that the build output of your project is not empty. You can do this by going to IIS, find the site with the name similar to
'deployment16(6).WindowsAzureProject2.WebApplication3_IN_0', right
click --> Explore.... Make sure that this folder is not empty and
contains all the files required to start a web project successfully.
As for the Access Denied error:
it could be just an IIS default setting to disable browsing. To resolve that, just navigate to that web site in IIS, find Directory Browsing icon, and press Enable. You will at least see the files inside that directory.
Also try not only 127.0.0.1:81, buta specific document inside that folder, like 127.0.0.1:81/Default.aspx
Take into account the fact that there's sometimes some mess with the ports. You see that in the error message it's port 82, but in your browser it's port 81. So make sure you're using the right port. Or, even better, in your service definition try to use some non-standard port for this to avoid remapping.
I've met the same issue. In the end, I had to reinstall IIS 7.
I got this exact same error and tried a re-install of IIS and the Azure SDK - nothing worked.
Eventually tracked it down to the "IIS URL Rewrite Module 2". I went to the Control Panel and chose Repair and it resolved it. If you have a section in your web.config then this might be the cause.
Follow step 11 from http://www.microsoft.com/en-us/download/details.aspx?id=35448. Worked for me on Windows 8 with Oct 2012 SDk when upgraded from 2011.
Related
Everything was fine until yesterday. This must be due to Windows update. No one touched the server. I have tired couple of similar solutions posted in Stack Overflow(all are old questions),none of them worked for me. What I have, Server Windows server 2019, APP netcore 3.1 ,IIS version 10. .net core runtime and SDK both are installed. This was working before. No one touched anything, just stopped working
In the browser appearing
HTTP Error 500.31 - ANCM Failed to Find Native Dependencies
When I executed on the command line
A fatal error was encountered. The library 'hostpolicy.dll' required to execute the application was not found in
When I checked event log. Something like below appeared. But let me tell you in the build
directory we don't have a file like app.runtimeconfig.json
What I have tried
Repair .netcoe runtime and SDK
Restore old DB backup
Reinstall .netcore versions
No pending Windows updates
Restart IIS APP pool also the server
Check file permission
None of them worked for me. If anyone can help, really appreciate.
For this issue, we can't find out that the environment of windows server caused by windows update is abnormal. As you said, it worked fine before.
So please allow me summarize below suggestions as answer.
Suggestions
Copy the publish file named original_file . And paste it in our dev pc or other server which have IIS Management. And test it, this publish file should be works. This step just confirm the publish file is normal.
Create a new website and a new application pool. Create a new asp.net core3.1 application and deploy it. Then check if it works properly under this new site.
The site should be fine in the second steps, and replace it with the original_file. And the application also should be works fine.
The site can't work in the second steps, it means the environment in you server has some problem. It could be registry issue or ApplicationHost.config issue in IIS and so on. If it's very important for you, you can rasie a support ticket and let official engineer help you to figure out what happend in this windows Update
After the third step, if the new site can run the original_file file well. We can compare ApplicationHost.config between the new site and the original one to see if any settings have been changed.
I've just created a new IIS website on a Windows Server 2008 in order to use it to deploy a new website.
The website is still empty.
If I try to open IIS Web Platform Installer under Management Tools, I get stuck on the error:
'doctype' is an unexpected token. The expected token is 'DOCTYPE'.
Line 1, position 3.
After closing the error, the Web platform Installer closes.
Do anyone know how to solve it?
Let me know in the comments if you need any other info or technical data, I have really no idea on how can I troubleshoot this
I had the same issue. However, I cannot uninstall IIS completely as I have many sites on my IIS running.
What I did was, I tried to install an IIS module which was not there. for eg, I chose CORS module.
You can get it from here https://www.iis.net/downloads/microsoft/iis-cors-module
Once I tried installing, WPI automatically uninstalled and reinstalled during the process and it resolved the issue.
Hope it helps!
As mentioned by #qbik Simply updating the Web platform installer fixed the issue. You can download the latest at this time from here.
Done, here's how I solved.
This issue seems to be strictly related to an old configuration of this server, so I had to manually reset it. If you face this issue, these following steps should work fine:
First of all, I had to remove the IIS role functionality from
Control Panel > Programs and Features > Turn Window Features on or
off > Roles.
Then, I restarted the server and added again the IIS role
functionality (make sure to check all of the asp net
functionalities).
After that, I restarted the server (again) and I have reinstalled: 1) DotNetCore.2.0.7-WindowsHosting (you've got to find the installer online, make sure to download the last version. 2.0.7 was the last when I made this question so on 25/05/2018) 2) Web platform Installer from here.
Executing web platform installer from all program inside start menu worked fine.
Hope it will be helpful
(See Also:
How to Install Web Platform Installer and Web Deployment)
My environment:
Windows 10 Creator (1703 with current updates to this date)
Visual Studio 2017, Enterprise, 15.3 with most of the goodies turned on.
Windows 2016, again with all current updates.
iis 10 with WebDeploy installed (that's a whole other installation nightmare, suffice it to say that SO helped there and the answers are already out there so I won't go into it here). Turned on ASP.NET 4.6, otherwise mainly accepted the defaults.
My process:
As per the NuGet.Server documentation, create a new ASP.NET MVC project using the "Empty" template and download and install NuGet.Server as specified. I'm using .NET 4.7 as my framework.
Compile and configure as desired (at least ensure you have an api key in place).
Deploy to iis using the "Publish" | Web Deploy option
Try to get in touch with the NuGet.Server on the website and fail miserably!
My bindings are 192.168.1.25 (yes, the server has a fixed IP address), port 80. The name of the site is AWENuGet and the desired url is www.awenuget.com.
To be sure, all of this works just fine if you take the same project as described above, assign a local port number (creating the project will do that anyway) and then simply running the application in Visual Studio works just fine.
But, when I took that self-same project and simply deployed it to iis, miserable failure.
I tried to open the host file (Windows\System 32\drivers\etc) and added the following:
192.168.1.25 www.awenuget.com
to said file and it still failed.
...and the answer, for me, was to take that same hosts file entry that I made on the server so that the server could see it and install it in my dev machine's hosts file and voila! NOW it works just fine.
I have a web application asp.net to deploy to Windows Azure. I try to run it on local first. But when debugging, I catch this error from VS2010:
"There was an error attaching the debugger to the IIS worker process
for URL 'http://127.255.0.0:82/' for role instance
'deployment16(6).WindowsAzureProject2.WebApplication3_IN_0'.
Unable to start debugging on the web server ......."
I've search so hard to find the solution for this problem but there's nothing seems work for me. I'm a newbie in Windows Azure, it's really a big trouble with me.
I had similar problem with Windows 8, debuging a cloud application with Visual Studio 2012 RTM and Azure SDK 1.71, when trying to launch the application into the compute emulator. It was a very simple app, but I used Azure diagnostics. At the end these are two things I have changed that have work for me, both turning on Windows 8 features (so go to Win8 and open 'Turn Windows Features On/Off'.
Activate the checkboxes for:
Internet Information Services Hostable Web Core
Internet Information Services > World Wide Web Services > Application Development Features > ASP.NET 4.5
Internet Information Services > World Wide Web Services > Health and Diagnostics > Tracing
Internet Information Services > Web Management Tools > IIS Management Scripts and Tools
That worked for me, it makes sense, as I'm using Visual Studio 2012 and trying to get some trace information using diagnostics in Azure.
I hope this will work for you or give some tip about the problem. In the case of being useful information, remember to vote as response or as value tip.
Thanks,
Mike
This usually happens when there's a problem with the project to be deployed to the emulator (WindowsAzureProject2 in your case).
Try the following:
Check %UserProfile%\AppData\Local\dftmp\IISConfiguratorLogs\IISConfigurator.log file for the error messages. See more details in this answer.
Make sure your project can be started without the emulator. It's a web project, so just try to start it as a regular web project. Or publish it to the separate folder and try to create a website in IIS of it.
Check your *.csdef and *.cscfg files to make sure all the configuration is correct.
Make sure that the build output of your project is not empty. You can do this by going to IIS, find the site with the name similar to deployment16(6).WindowsAzureProject2.WebApplication3_IN_0, right click --> Explore.... Make sure that this folder is not empty and contains all the files required to start a web project successfully.
BTW, there's a similar question: Debugger can't connect when starting local azure project
Follow step 11 from http://www.microsoft.com/en-us/download/details.aspx?id=35448. Worked for me on Windows 8 with Oct 2012 SDk
I just have today the same problem trying to Debug locally with Azure Storage Emulator in Windows 7. So in the Azure project properties, in Web tab, I checked the radio button 'Use IIS Express' and it debugged without problem. I hope this helps someone.
I encountered this exact same problem when I upgraded an existing Azure solution to the Azure SDK 2.1. After some hunting around I uncovered that the upgrade had automatically set the "Local Development Server" setting to "Use IIS Web Server".
Changing the "Local Development Server" setting to "Use IIS Express" fixed the problem immediately.
To access this setting right-click the Azure cloud project file in your solution, select the "Properties" option, tab down to "Web" and you'll see the following setup.
Also, make sure you run Visual Studio as administrator
Please check the version of emulator you have installed. If your code is created in older sdk and you have a new emulator installed it will give you this error.
Check the version of Azure APIs in your project, go to Project > references and right click on Azure dlls to check the version, same sdk version must be installed on the system, higher are optional as azure 2.x are not backward compatible.
If I have more than one webroles(projects, not instances) in my application, I get this error: (I only get it if I attach a web role. It works fine wit as many worker roles projects as I want)
Microsoft Visual Studio
Windows Azure Tools for Microsoft Visual Studio
There was an error attaching the debugger to the IIS worker process for URL 'http://127.0.0.1:5100/' for role instance 'deployment(21).CloudPOC.WebRoleToHostDataService.0'. Unable to start debugging on the web server. The web server is not configured correctly. See help for common configuration errors. Running the web page outside of the debugger may provide further information.
Click Help for more information.
OK
What is wrong here? I can't understand it and I need a webservice project!
Make sure you are starting the Azure project rather than the Web Project itself. You might have set the Web Role as the startup project, and if you do that you'll find that IIS runs the Web App rather than the Azure Dev Fabric, meaning any Dev Fabric specific stuff (like config settings per role) aren't available causing problems.
What you're meant to do is let the Azure Dev Fabric (Compute Simulator) fire up all your roles for you, and it'll also work out if it needs to open a web browser etc.
So right click on the Azure Cloud project, set that as the Startup Project, and try again.
Hope that helps,
Andy
EDIT thought of something else!
Make sure your web.config is compiling to allow debug="true". If you have added a new WebSite to your solution, it won't be so by default:
<system.web>
<compilation debug="true" targetFramework="4.0" />
I had similar issue which got resolved with following steps.
Make sure you have correct version of .net framework 4.0 is intalled. (.Net Framework 4.0.30319 is the latest version)
Uninstall if there isany other .Net 4.0 framework in present on your system by going to Add And Remove programs.
Go to %windir%\Microsoft.NET\Framework64 physical location and remove unwanted .Net framework 4.0 folder
I've also had this problem and it happened when I upgraded my app to 4.0... I ran without debugging and got the following error:
There is a duplicate 'system.web.extensions/scripting/scriptResourceHandler' section defined
and after researching that error, I found this:
http://forums.asp.net/t/1571308.aspx/1
which says there's currently a bug w/ vs2010 and 4.0... I took the answers recommendation and commented out the extensions section and it worked for me... Another possible solution.