I know how to do a search and replace amongst group of files:
perl -pi -w -e 's/search/replace/g;' *.php
So I can use that to search for a keyword or phrase and change it. But I have a more complicated task I dont know how to do.
I want to do a search and replace among all my php files to search for a specific Keyword and replace it with the File Name minus the extension.
Example: Search the file Mountains.php for the keyword Trees and everywhere you see Trees, replace it with Mountains
Of course I want to be able to do that in batch, for a few hundred php files all with different names, however, all containing the search term Trees.
If someone is looking for an extra challenge, haha, it would be even better if I could do a more complex scenario such as....
Example: Search the file MountainTowns.php for the keyword Trees and everywhere you see Trees, replace it with "Mountain Towns" (note the extra space, Capital Letters could would indicate where spaces go)
Thanks for your time and considering my question.
Well, the filename is in $ARGV, so there is not much more work needed.
perl -i -pe '($x=$ARGV)=~s{.php$}{};s{Trees}{$x}g' BlueMountains.php RedMountains.php
Add in
$x=~s{(.)([A-Z])}{$1 $2}g;
to add the space before upcased letters, for a complete line of
perl -i -pe '($x=$ARGV)=~s{.php$}{};$x=~s{(.)([A-Z])}{$1 $2}g;s{Trees}{$x}g' BlueRedMountains.php
This might work for you:
printf "%s\n" *.php |perl -pwe 's|(.*).php|perl -pi -we "s/Trees/$1/g;" $&|' | bash
This uses perl to write a script to do you bidding.
Other little languages could be employed, like awk or:
printf "%s\n" *.php |sed 'h;s/\.php//;s/\B[A-Z]/ &/;G;s|\(.*\)\n\(.*\)|sed -i "s/Trees/\1/g" \2|' | bash
This uses sed to provide a solution for the second request.
You want a separate replacement for each file, so run a separate search and replace for each:
for file in *.php; do sed -i "s/foo/${file%.*}/g" "$file"; done
And your second request is a bit harder, it at least requires a subshell.
for file in *; do sed -i "s/bar/$(echo ${file%.*} | sed 's/\(.\)\([A-Z]\)/\1 \2/')/g" "$file"; done
It's a bit more readable if you put it in a script:
#!/bin/bash
for file in "$#"; do
replacement=$(echo ${file%.*} | sed 's/\(.\)\([A-Z]\)/\1 \2/')
sed -i "s/bar/$replacement/g" "$file";
done
This will work over all the arguments passed it, so call with ./script.sh *.php.
Related
What's the simplest way to do a find and replace for a given input string, say abc, and replace with another string, say XYZ in file /tmp/file.txt?
I am writting an app and using IronPython to execute commands through SSH — but I don't know Unix that well and don't know what to look for.
I have heard that Bash, apart from being a command line interface, can be a very powerful scripting language. So, if this is true, I assume you can perform actions like these.
Can I do it with bash, and what's the simplest (one line) script to achieve my goal?
The easiest way is to use sed (or perl):
sed -i -e 's/abc/XYZ/g' /tmp/file.txt
Which will invoke sed to do an in-place edit due to the -i option. This can be called from bash.
If you really really want to use just bash, then the following can work:
while IFS='' read -r a; do
echo "${a//abc/XYZ}"
done < /tmp/file.txt > /tmp/file.txt.t
mv /tmp/file.txt{.t,}
This loops over each line, doing a substitution, and writing to a temporary file (don't want to clobber the input). The move at the end just moves temporary to the original name. (For robustness and security, the temporary file name should not be static or predictable, but let's not go there.)
For Mac users:
sed -i '' 's/abc/XYZ/g' /tmp/file.txt
(See the comment below why)
File manipulation isn't normally done by Bash, but by programs invoked by Bash, e.g.:
perl -pi -e 's/abc/XYZ/g' /tmp/file.txt
The -i flag tells it to do an in-place replacement.
See man perlrun for more details, including how to take a backup of the original file.
I was surprised when I stumbled over this...
There is a replace command which ships with the "mysql-server" package, so if you have installed it try it out:
# replace string abc to XYZ in files
replace "abc" "XYZ" -- file.txt file2.txt file3.txt
# or pipe an echo to replace
echo "abcdef" |replace "abc" "XYZ"
See man replace for more on this.
This is an old post but for anyone wanting to use variables as #centurian said the single quotes mean nothing will be expanded.
A simple way to get variables in is to do string concatenation since this is done by juxtaposition in bash the following should work:
sed -i -e "s/$var1/$var2/g" /tmp/file.txt
Bash, like other shells, is just a tool for coordinating other commands. Typically you would try to use standard UNIX commands, but you can of course use Bash to invoke anything, including your own compiled programs, other shell scripts, Python and Perl scripts etc.
In this case, there are a couple of ways to do it.
If you want to read a file, and write it to another file, doing search/replace as you go, use sed:
sed 's/abc/XYZ/g' <infile >outfile
If you want to edit the file in place (as if opening the file in an editor, editing it, then saving it) supply instructions to the line editor 'ex'
echo "%s/abc/XYZ/g
w
q
" | ex file
Example is like vi without the fullscreen mode. You can give it the same commands you would at vi's : prompt.
I found this thread among others and I agree it contains the most complete answers so I'm adding mine too:
sed and ed are so useful...by hand.
Look at this code from #Johnny:
sed -i -e 's/abc/XYZ/g' /tmp/file.txt
When my restriction is to use it in a shell script, no variable can be used inside in place of "abc" or "XYZ". The BashFAQ seems to agree with what I understand at least. So, I can't use:
x='abc'
y='XYZ'
sed -i -e 's/$x/$y/g' /tmp/file.txt
#or,
sed -i -e "s/$x/$y/g" /tmp/file.txt
but, what can we do? As, #Johnny said use a while read... but, unfortunately that's not the end of the story. The following worked well with me:
#edit user's virtual domain
result=
#if nullglob is set then, unset it temporarily
is_nullglob=$( shopt -s | egrep -i '*nullglob' )
if [[ is_nullglob ]]; then
shopt -u nullglob
fi
while IFS= read -r line; do
line="${line//'<servername>'/$server}"
line="${line//'<serveralias>'/$alias}"
line="${line//'<user>'/$user}"
line="${line//'<group>'/$group}"
result="$result""$line"'\n'
done < $tmp
echo -e $result > $tmp
#if nullglob was set then, re-enable it
if [[ is_nullglob ]]; then
shopt -s nullglob
fi
#move user's virtual domain to Apache 2 domain directory
......
As one can see if nullglob is set then, it behaves strangely when there is a string containing a * as in:
<VirtualHost *:80>
ServerName www.example.com
which becomes
<VirtualHost ServerName www.example.com
there is no ending angle bracket and Apache2 can't even load.
This kind of parsing should be slower than one-hit search and replace but, as you already saw, there are four variables for four different search patterns working out of one parse cycle.
The most suitable solution I can think of with the given assumptions of the problem.
You can use sed:
sed -i 's/abc/XYZ/gi' /tmp/file.txt
You can use find and sed if you don't know your filename:
find ./ -type f -exec sed -i 's/abc/XYZ/gi' {} \;
Find and replace in all Python files:
find ./ -iname "*.py" -type f -exec sed -i 's/abc/XYZ/gi' {} \;
Be careful if you replace URLs with "/" character.
An example of how to do it:
sed -i "s%http://domain.com%http://www.domain.com/folder/%g" "test.txt"
Extracted from: http://www.sysadmit.com/2015/07/linux-reemplazar-texto-en-archivos-con-sed.html
If the file you are working on is not so big, and temporarily storing it in a variable is no problem, then you can use Bash string substitution on the whole file at once - there's no need to go over it line by line:
file_contents=$(</tmp/file.txt)
echo "${file_contents//abc/XYZ}" > /tmp/file.txt
The whole file contents will be treated as one long string, including linebreaks.
XYZ can be a variable eg $replacement, and one advantage of not using sed here is that you need not be concerned that the search or replace string might contain the sed pattern delimiter character (usually, but not necessarily, /). A disadvantage is not being able to use regular expressions or any of sed's more sophisticated operations.
You may also use the ed command to do in-file search and replace:
# delete all lines matching foobar
ed -s test.txt <<< $'g/foobar/d\nw'
See more in "Editing files via scripts with ed".
To edit text in the file non-interactively, you need in-place text editor such as vim.
Here is simple example how to use it from the command line:
vim -esnc '%s/foo/bar/g|:wq' file.txt
This is equivalent to #slim answer of ex editor which is basically the same thing.
Here are few ex practical examples.
Replacing text foo with bar in the file:
ex -s +%s/foo/bar/ge -cwq file.txt
Removing trailing whitespaces for multiple files:
ex +'bufdo!%s/\s\+$//e' -cxa *.txt
Troubleshooting (when terminal is stuck):
Add -V1 param to show verbose messages.
Force quit by: -cwq!.
See also:
How to edit files non-interactively (e.g. in pipeline)? at Vi SE
Try the following shell command:
find ./ -type f -name "file*.txt" | xargs sed -i -e 's/abc/xyz/g'
You can use python within the bash script too. I didn't have much success with some of the top answers here, and found this to work without the need for loops:
#!/bin/bash
python
filetosearch = '/home/ubuntu/ip_table.txt'
texttoreplace = 'tcp443'
texttoinsert = 'udp1194'
s = open(filetosearch).read()
s = s.replace(texttoreplace, texttoinsert)
f = open(filetosearch, 'w')
f.write(s)
f.close()
quit()
Simplest way to replace multiple text in a file using sed command
Command -
sed -i 's#a/b/c#D/E#g;s#/x/y/z#D:/X#g;' filename
In the above command s#a/b/c#D/E#g where I am replacing a/b/c with D/E and then after the ; we again doing the same thing
You can use rpl command. For example you want to change domain name in whole php project.
rpl -ivRpd -x'.php' 'old.domain.name' 'new.domain.name' ./path_to_your_project_folder/
This is not clear bash of cause, but it's a very quick and usefull. :)
For MAC users in case you don't read the comments :)
As mentioned by #Austin, if you get the Invalid command code error
For the in-place replacements BSD sed requires a file extension after the -i flag to save to a backup file with given extension.
sed -i '.bak' 's/find/replace' /file.txt
You can use '' empty string if you want to skip backup.
sed -i '' 's/find/replace' /file.txt
All merit to #Austin
Open file using vim editor. In command mode
:%s/abc/xyz/g
This is the simplest
In case of doing changes in multiple files together we can do in a single line as:-
user_name='whoami'
for file in file1.txt file2.txt file3.txt; do sed -i -e 's/default_user/${user_name}/g' $file; done
Added if in case could be useful.
I have to implement an application in shell programming (Unix/Linux).
I have to search a word from a text file and replace that word with my given word. I have a knowledge on shell and still learning.
I am not expecting source code. Can anybody help me or suggest me or give me some similar solution....
cat abc.txt | grep "pattern" | sed 's/"pattern"/"new pattern"/g'
The above command should work
Thanks,
Regards,
Dheeraj Rampally
Say you are looking for pattern in a file (input.txt) and want to replace it with "new pattern" in another (output.txt)
Here is the main idea, without UUOC:
<input.txt sed 's/"pattern"/"new pattern"/g' >output.txt
todo
Now you need to embed this line in your program. You may want to make it interactive, or a command that you could use with 3 parameters.
edit
I tried to avoid the use of output.txt as a temporary file with this:
<input.txt sed 's/"pattern"/"new pattern"/g' >input.txt
but it empties input.txt for a reason I can't understand. So I tried with a subshell, so:
echo $(<input.txt sed 's/pattern/"new pattern"/g')>input.txt
... but the echo command removes line breaks... still looking.
edit2
From https://unix.stackexchange.com/questions/11067/is-there-a-way-to-modify-a-file-in-place , it looks like writing to the very same file at once it not easy at all. However, I could do what I wanted with sed -i for linux only:
sed -i 's/pattern/"new pattern"/g' input.txt
From sed -i + what the same option in SOLARIS , it looks like there's no alternative, and you must use a temporary file:
sed 's/pattern/"new pattern"/g' input.txt > input.tmp && mv input.tmp input.txt
Assuming an ini-style file like this,
[Group]
Icon=xxx.ico
Title=An Image Editor
Description=Manipulates .ico, .png and .jpeg images
I want to replace/delete ".ico" ONLY in the line that starts with (or matches) "Icon="
I was trying this:
oldline="`cat "$file" | grep "Icon="`"
newline="`echo "$oldline" | tr ".ico" ".png"`"
cat "$oldfile" | tr "$oldline" "$newline" > $file
Then i realized that tr works completely different than i thought. Its NOT a tradicional "replace this for that" function. So i guess the correct way is using sed. But:
Ive never used sedbefore. No idea how it works. Is it overkill?
If the most indicated way is really using sed, given it is so powerful, is there any elegant way to accomplish this rather than this "fetch line -> modify line -> replace oldline for newline in file" approach?
Notes:
I cant replace ".ico" globally, i know that would be a LOT easier, i must restrict the replace to the Icon line, otherwise the Description line would be changed too.
Im new to shell scripting in Linux, so im looking not only to the solution itself, but also for the "proper" way to do it. Elegant, easy to read, conventional, etc
Thanks in advance!
Edit:
Thank you guys! Here is the final script, as a reference:
#! /bin/bash
# Fix the following WARNING in ~/.xsession-errors
# gnome-session[2035]: EggSMClient-WARNING: Desktop file '/home/xxx/.config/autostart/skype.desktop' has malformed Icon key 'skype.png'(should not include extension)
file="$HOME/.config/autostart/skype.desktop"
if [ -f "$file" ] ; then
if `cat "$file" | grep "Icon=" | grep -q ".png"` ; then
sed -i.bak '/^Icon=/s/\.png$//' "$file"
cp "$file" "$PWD"
cp "${file}.bak" "$PWD"
else
echo "Nothing to fix! (maybe fixed already?)"
fi
else
echo "Skype not installed (yet...)"
fi
MUCH sleeker than my original! The only thing i regret is that sed backup does not preserve original file timestamp. But i can live with that.
And, for the record, yes, ive created this script to fix an actual "bug" in Skype packaging.
Something like the following in sed should do what you need. First we check if the line starts with Icon= and if it does then we run the s command (i.e. substitute).
sed -i '/^Icon=/s/\.ico$/.png/' file
Edit: The sed script above can also be written like this:
/^Icon=/ { # Only run the following block when this matches
s/\.ico$/.png/ # Substitute '.ico' at the end of the line with '.png'
}
See this page for more details on how to restrict when commands are run.
sed is pretty easy to deal with. Here's one way:
sed 's/^\(Icon=.*\)\.ico$/\1.png/'
By default, sed works on every line in the file one at a time. The 's/.../.../' will do a regular expression match on the first argument and replace it with the second argument. The \1 stands for everything that matched the first group, which is demarcated by the parenthesis. You have to escape the parens with \.
The above works as part of a pipeline, but you can add an '-i' flag, like this
sed -i 's/^\(Icon=.*\)\.ico$/\1.png/' input.txt
to have it replace the file input.txt in place. Don't add that until you have tested your sed script a little.
I have a huge SQL file that gets executed on the server. The dump is from my machine and in it there are a few settings relating to my machine. So basically, I want every occurance of "c://temp" to be replace by "//home//some//blah"
How can this be done from the command line?
sed is a good choice for large files.
sed -i.bak -e 's%C://temp%//home//some//blah%' large_file.sql
It is a good choice because doesn't read the whole file at once to change it. Quoting the manual:
A stream editor is used to perform
basic text transformations on an input
stream (a file or input from a
pipeline). While in some ways similar
to an editor which permits scripted
edits (such as ed), sed works by
making only one pass over the
input(s), and is consequently more
efficient. But it is sed's ability to
filter text in a pipeline which
particularly distinguishes it from
other types of editors.
The relevant manual section is here. A small explanation follows
-i.bak enables in place editing leaving a backup copy with .bak extension
s%foo%bar% uses s, the substitution command, which
substitutes matches of first string
in between the % sign, 'foo', for the second
string, 'bar'. It's usually written as s//
but because your strings have plenty
of slashes, it's more convenient to
change them for something else so you
avoid having to escape them.
Example
vinko#mithril:~$ sed -i.bak -e 's%C://temp%//home//some//blah%' a.txt
vinko#mithril:~$ more a.txt
//home//some//blah
D://temp
//home//some//blah
D://temp
vinko#mithril:~$ more a.txt.bak
C://temp
D://temp
C://temp
D://temp
Just for completeness. In place replacement using perl.
perl -i -p -e 's{c://temp}{//home//some//blah}g' mysql.dmp
No backslash escapes required either. ;)
Try sed? Something like:
sed 's/c:\/\/temp/\/\/home\/\/some\/\/blah/' mydump.sql > fixeddump.sql
Escaping all those slashes makes this look horrible though, here's a simpler example which changes foo to bar.
sed 's/foo/bar/' mydump.sql > fixeddump.sql
As others have noted, you can choose your own delimiter, which would prevent the leaning toothpick syndrome in this case:
sed 's|c://temp\\|home//some//blah|' mydump.sql > fixeddump.sql
The clever thing about sed is that it operating on a stream rather than a file all at once, so you can process huge files using only a modest amount of memory.
There's also a non-standard UNIX utility, rpl, which does the exact same thing that the sed examples do; however, I'm not sure whether rpl operates streamwise, so sed may be the better option here.
The sed command can do that.
Rather than escaping the slashes, you can choose a different delimiter (_ in this case):
sed -e 's_c://temp/_/home//some//blah/_' file1.txt > file2.txt
perl -pi -e 's#c://temp#//home//some//blah#g' yourfilename
The -p will treat this script as a loop, it will read the specified file line by line running the regex search and replace.
-i This flag should be used in conjunction with the -p flag. This commands Perl to edit the file in place.
-e Just means execute this perl code.
Good luck
gawk
awk '{gsub("c://temp","//home//some//blah")}1' file
I have a set of 10 CSV files, which normally have a an entry of this kind
a,b,c,d
d,e,f,g
Now due to some error entries in this file have become of this kind
a,b,c,d
d,e,f,g
,,,
h,i,j,k
Now I want to remove the line with only commas in all the files. These files are on a Linux filesystem.
Any command that you recommend that can replaces the erroneous lines in all the files.
It depends on what you mean by replace. If you mean 'remove', then a trivial variant on #wnoise's solution is:
grep -v '^,,,$' old-file.csv > new-file.csv
Note that this deletes just those lines with exactly three commas. If you want to delete mal-formed lines with any number of commas (including zero) - and no other characters on the line, then:
grep -v '^,*$' ...
There are endless other variations on the regex that would deal with other scenarios. Dealing with full CSV data with commas inside quotes starts to need something other than a regex machine. It can be done, within broad limits, especially in more complex regex systems such as PCRE or Perl. But it requires more work.
Check out Mastering Regular Expressions.
sed 's/,,,/replacement/' < old-file.csv > new-file.csv
optionally followed by
mv new-file.csv old-file.csv
Replace or remove, your post is not clear... For replacement see wnoise's answer. For removing, you could use
awk '$0 !~ /,,,/ {print}' <old-file.csv > new-file.csv
What about trying to keep only lines which are matching the desired format instead of handling one exception ?
If the provided input is what you really want to match:
grep -E '[a-z],[a-z],[a-z],[a-z]' < oldfile.csv > newfile.csv
If the input is different, provide it, the regular expression should not be too hard to write.
Do you want to replace them with something, or delete them entirely? Either way, it can be done with sed. To delete:
sed -i -e '/^,\+$/ D' yourfile1.csv yourfile2.csv ...
To replace: well, see wnoise's answer, or if you don't want to create new files with the output,
sed -i -e '/^,\+$/ s//replacement/' yourfile1.csv yourfile2.csv ...
or
sed -i -e '/^,\+$/ c\
replacement' yourfile1.csv yourfile2.csv ...
(that should be entered exactly as is, including the line break). Of course, you can also do this with awk or perl or, if you're only deleting lines, even grep:
egrep -v '^,+$' < oldfile.csv > newfile.csv
I tested these to make sure they work, but I'd advise you to do the same before using them (just in case). You can omit the -i option from sed, in which case it'll print out the results (rather than writing them back to the file), or omit the output redirection >newfile.csv from grep.
EDIT: It was pointed out in a comment that some features of these sed commands only work on GNU sed. As far as I can tell, these are the -i option (which can be replaced with shell redirection, sed ... <infile >outfile ) and the \+ modifier (which can be replaced with \{1,\} ).
Most simply:
$ grep -v ,,,, oldfile > newfile
$ mv newfile oldfile
yes, awk or grep are very good option if you are working in linux platform. However you can use perl regex for other platform. using join & split options.