I am using a vim/nvim plugin asyncrun that enables an API call that works fine in nvim if I implement it in ~/.config/nvim/init.vim using a line:
call asyncrun#run("", "cwd", "firefox")
Now this same line does not work for vim if I try to use it inside ~/.vimrc. I always get a warning:
Unknown finction: asyncrun#run
What needs to be changed in order for this to also work for vim?
Following the #doopNudles comment I also clarify that vim plugin is manually installed in the folder ~/.vim/pack/my-plugins/start/vim-asyncrun/asyncrun.vim/plugin/asyncrun.vim. I install all my vim plugins the same way (using the vim v8 native ability to detect plugins).
The problem was that ~/.vim/pack/my-plugins/start/vim-asyncrun/asyncrun.vim/plugin/asyncrun.vim has one extra folder!
It works if I delete the extra folder asyncrun.vim like this ~/.vim/pack/my-plugins/start/vim-asyncrun/plugin/asyncrun.vim
I have vim's syntastic installed properly along with eslint and jshint. I prefer jshint for most of my javascript programming. However, I'm starting to learn React, and would like to use eslint with syntastic (eslint has superior/proper linting for react).
Is it possible to set vim to use jshint for *.js files, and eslint for *.jsx files?
I see from :help syntastic-checkers that react gets lumped in javascript. Chaining the linters is not what I want, either.
Found it! You were very close #lcd047, but your comment lead me down the right path! To enable eslint on only *jsx files, putting the following in my .vimrc works:
au BufEnter *.jsx let b:syntastic_checkers = ['eslint']
In my case, syntastic will use jshint on javascript by default even if a checker is not set in .vimrc. Setting the above works even if g:syntastic_javascript_checkers is unset or even if it is set, in my case, to jshint.
So I git cloned the repository to ~/.vim/bundle and had pathogen installed. I can be sure pathogen works fine since my other plugins in bundle are all working fine. After googling for a while, it seems that syntastic should work out of box for c code. I also checked that I have all the executables specified in syntastic/syntax_checkers/c/.
Here is a part of my .vimrc file:
" syntastic
let g:syntastic_auto_loc_list=1
let g:syntastic_disabled_filetypes=['html']
let g:syntastic_enable_signs=1
When I open a *.c file and do :SyntasticCheck, nothing happens. There is no errors complaining command not found, so syntastic is loaded. However, even if the *.c file that's currently opened contains errors syntax error, syntastic is not showing anything.
It is the first time I use syntastic so I don't really know the correct way to invoke it.
I also tried :SyntasticCheck [c] and I get the following error message:
Error detected while processing function <SNR>_22_UpdateErrors..<SNR>22_CacheErrors:
line 16:
E121: Undefined variable: checkers
E15: Invalid expression: checkers
Can someone tell me what I did wrong and how to invoke syntastic?
Thanks!
Try adding this to your vimrc:
let g:syntastic_check_on_open=1
let g:syntastic_enable_signs=1
(This is lifted straight from my vimrc, which has some other Syntastic settings if you'd like.)
I don't really understand the reason, but when I re-installed the YouCompleteMe plugin for vim with ./install.sh --clang-completer. Syntastic works like charm.
Installing clang and/or ctags packages fixed this for me
I did two things and then Syntastic started to behave as expected with JS files and ESlint. Can't tell which one did the trick:
1- In the project's directory ran eslint --init.
2- Started vim opening the file without the -S flag.
Before it failed silently, no errors and no diagnostics. This is how ESlint behaves when there is no configuration file.
Pathogen does not work for me. I am following Adam Lowe's hints posted here (and few more) without any success...
My vimrc:
filetype off
call pathogen#runtime_append_all_bundles()
filetype plugin indent on
set nocompatible
syntax on
set tabstop=2
set smarttab
set shiftwidth=2
set autoindent
set expandtab
set number
colorscheme darkblue
Contents of .vim - ls .vim/*:
.vim/autoload:
pathogen.vim
.vim/bundle:
nerdcommenter/ vim-haml/ vim-surround/
vim-endwise/ vim-rails/ vim-vividchalk/
All plugins in bundle were installed by cloning them from GitHub into bundle directory.
I have tried with pathogen 1.1 and 1.2 and even the latest from GitHub without any result. Vividchalk, Vim-rails and nerdcommenter are not working. I have very little experience with other plugs so I am not sure about them, but I suppose they are not working too.
I am using ArchLinux, vim 7.2.385-1 (not the latest because the latest requires me to install ruby1.9, but it is still 7.2). It has been installed via pacman - ArchLinux package manager. No vim plugins were installed the other way than using pathogen (I have even reinstalled vim package with cleaning /usr/share/vim).
What am I doing wrong?
EDIT:
/etc/vimrc http://hpaste.org/fastcgi/hpaste.fcgi/view?id=29685#a29685
/usr/share/vim/vimfiles/archlinux.vim http://hpaste.org/fastcgi/hpaste.fcgi/view?id=29686#a29686
This seems to be common problem caused by the "system" vimrc in some distributions setting filetype on before you set up pathogen. So turning it off and back on again forces plugins to load correctly:
call pathogen#runtime_append_all_bundles()
filetype off
syntax on
filetype plugin indent on
More info here.
I was having a similar problem. Pathogen was loading some of my plugins while not all of them.
After some fiddling and wondering I discovered (I don't know if it's mentioned in the documentation) that in each bundle/'plugin_name' folder, there should be another folder called plugin that contains the *.vim file.
Then, when vim starts will look, not in bundle, but in those folders within bundle that contain a folder called plugin... and will create other folders (in each plugin folder).
So, if the plugin is just a .vim file make a folder for it...
instead of:
~/.vim/bundle/vimexplorer/vimExplorer.vim
you need:
~/.vim/bundle/vimexplorer/plugin/vimExplorer.vim
And everything works like a charm.
I've had problems loading particular plugins: specifically, plugins with a plugin subdirectory. For example, on a fresh MacVim install, a plugin in ~/.vim/bundle/surround/plugin/surround.vim wasn't being loaded, even though ~/.vim/bundle/surround appeared in the output of :scriptnames.
The problem was that I was loading Pathogen in .gvimrc, not .vimrc. For whatever reason, stuff in .vim/bundle/*/plugin subdirectories won't load if you do that, so do it in .vimrc!
I've opened an issue on github—I don't know if it can be made to work even if it loads from .gvimrc, but there should at least be some sort of warning in the documentation for idiots like me.
If your .vim is based on a git repo and submodules, DO REMEMBER to run git submodule init and git submodule update after cloning the repo. i.e.
git submodule init
git submodule update
I had the same error and tried all of the above, but it didn't work. Until I initialized and updated the git submodules.
Hope this helps for anyone who has a similar error.
Maybe Arch's default vimrc (possibly /etc/vim/vimrc) doesn't play well with Pathogen. Try starting Vim without loading config files:
vim -u NONE
and then load your vimrc from within vim:
:so ~/.vimrc
Do the plugins work then?
Fixed by (mattn & tpope) after raising issue via github
set nocp
call pathogen#infect()
syntax on
filetype plugin indent on
call pathogen#infect()
see https://github.com/tpope/vim-pathogen/issues/50#issuecomment-3137909
My environment is Vim 7.3.35 and Ubuntu 11.04.
I spent some time trying to resolve it. I clone the project https://github.com:r00k/dotfiles and follow the instructions to install.
When started vi a got the so commented
E117: Unknown function: pathogen#runtime_append_all_bundles
and the solution:
filetype off
call pathogen#runtime_append_all_bundles()
filetype on
did not work.
I found the .vim symlink in my home directory where no properly set. The install script made a .vim DIRECTORY with a symlink vim inside of it pointing to my .dotfiles/vim. The solution was to delete the .vim directory and make a symlink .vim pointing .dotfiles/vim.
A kept the filetype off/on in my .vimrc also.
filetype off
call pathogen#runtime_append_all_bundles()
call pathogen#helptags()
Try to check your runtime path using command:
:set runtimepath?
First entry should be something like ~/.vim.
My problem with not loading plugins/pathogen was that i placed my vim environment in ~/.dotfiles/vim where my vimrc and rest of the stuff (plugins etc.) lives.
After creating symlink to ~/.dotfiles/vim/vimrc in ~/.vimrc i forgot to make second symlink ~/.vim -> ~/.dotfiles/vim/ which caused vim to be confused cause he was looking for stuff in ~/.vim (default). After i made proper symlink everything poped in right place.
I hope it will help someone who forgot about second symlink like I did ;-)
Instead of call pathogen#runtime_append_all_bundles(), I used call pathogen#infect('~/.vim/bundle') and it worked for me.
I was having the same problem with Ubuntu. The log was:
linha 4: executando "/usr/share/vim/vim73/ftoff.vim"
Erro detectado ao processar /usr/share/vim/vim73/ftoff.vim:
linha 11:
E216: Grupo ou evento inexistente: filetypedetect *
fim da execução de /usr/share/vim/vim73/ftoff.vim
The solution was to add "\n"s at the end from file /usr/share/vim/vim73/ftoff.vim to execute it properly.
set nocp
call pathogen#infect()
syntax on
filetype plugin indent on
call pathogen#infect()
The above helped me fix the issue, can't leave a comment on other peoples however thank you for posting the code above.
I have it in mine as:
silent! call pathogen#runtime_append_all_bundles()
After spending waaaay too long trying to solve this problem with nerd-commenter/pathogen, I broke down and just used Debian's OS provided nerd-commenter plugin:
vim-addons install nerd-commenter
If you're on Debian and need to get back to work, try it out. You probably need "vim-addon-manager" and "vim-scripts" packages installed from apt if you don't have it already.
In my case I cloned to a folder ~/dotfiles but vun looks for a folder ~/.vim, as a result he carried no plugins or color schemes to solve the problem I did this:
ln -s ~/.dotfiles ~/.vim
I had the same problem. I tried every possible combination.
Finally I found that if I use mksession to save my Vim workspace and have it load on Vim startup, it made pathogen not load new plugins I put into the bundle folder.
After installing a new plugin I now always delete my session file and start Vim fresh and every plugin loads fine.
filetype off
set nocompatible
set laststatus=2
execute pathogen#infect()
syntax on
filetype plugin indent on
For the sake of completion I'll add my solution for this problem.
I just renamed my ~/.gvimrc file to ~/.vimrc, and all my problems were solved. I literally copied my .vim and my .gvimrc from linux and did this change and everything works as expected.
I was facing the same issue, finally after lot of google and tweaking the vimrc file, found the solution. Hope the following code snippet would resolve the issue.
set nocp
source /home/ameet/.vim/autoload/pathogen.vim "location of my pathogen.vim
call pathogen#infect()
call pathogen#helptags()
i had the same problem , solved by copying this file into ~/.vim/autoload:
https://github.com/sontek/dotfiles/blob/master/_vim/autoload/pathogen.vim
I just downloaded a Vim plugin for Sass syntax highlight.
The instructions say:
install details put it into syntax
directory and add sass filetype
au! BufRead,BufNewFile *.sass
setfiletype sass
in your filetype.vim
I already placed sass.vim in vimfiles/syntax/ (using windows).
And created a filetype.vim file with the code above (au! Buf...) in all the following directories:
vimfiles/
vimfiles/ftdetect
vimfiles/ftplugins
but no one worked (I even typed the au! Buf... code in my vimrc).
My .sass files still looking like this:
alt text http://img193.imageshack.us/img193/4791/sassi.png
any suggestions?
I don't know an easy fix, but try checking some vim settings with the following commands:
Does enabling syntax explicitly fix your problem? :syntax enable
Is filetype detection on? :filetype
Does vim recognize this as a sass file? :set filetype?
Check to make sure your script directories are in the runtime path :set runtimepath?
Does manually loading the syntax file change anything? :runtime! vimfiles/syntax/sass.vim
Also check if syntax highlighting works for other filetypes.