Is there a simple way, in a pretty standard UNIX environment with bash, to run a command to delete all but the most recent X files from a directory?
To give a bit more of a concrete example, imagine some cron job writing out a file (say, a log file or a tar-ed up backup) to a directory every hour. I'd like a way to have another cron job running which would remove the oldest files in that directory until there are less than, say, 5.
And just to be clear, there's only one file present, it should never be deleted.
The problems with the existing answers:
inability to handle filenames with embedded spaces or newlines.
in the case of solutions that invoke rm directly on an unquoted command substitution (rm `...`), there's an added risk of unintended globbing.
inability to distinguish between files and directories (i.e., if directories happened to be among the 5 most recently modified filesystem items, you'd effectively retain fewer than 5 files, and applying rm to directories will fail).
wnoise's answer addresses these issues, but the solution is GNU-specific (and quite complex).
Here's a pragmatic, POSIX-compliant solution that comes with only one caveat: it cannot handle filenames with embedded newlines - but I don't consider that a real-world concern for most people.
For the record, here's the explanation for why it's generally not a good idea to parse ls output: http://mywiki.wooledge.org/ParsingLs
ls -tp | grep -v '/$' | tail -n +6 | xargs -I {} rm -- {}
Note: This command operates in the current directory; to target a directory explicitly, use a subshell ((...)) with cd:
(cd /path/to && ls -tp | grep -v '/$' | tail -n +6 | xargs -I {} rm -- {})
The same applies analogously to the commands below.
The above is inefficient, because xargs has to invoke rm separately for each filename.
However, your platform's specific xargs implementation may allow you to solve this problem:
A solution that works with GNU xargs is to use -d '\n', which makes xargs consider each input line a separate argument, yet passes as many arguments as will fit on a command line at once:
ls -tp | grep -v '/$' | tail -n +6 | xargs -d '\n' -r rm --
Note: Option -r (--no-run-if-empty) ensures that rm is not invoked if there's no input.
A solution that works with both GNU xargs and BSD xargs (including on macOS) - though technically still not POSIX-compliant - is to use -0 to handle NUL-separated input, after first translating newlines to NUL (0x0) chars., which also passes (typically) all filenames at once:
ls -tp | grep -v '/$' | tail -n +6 | tr '\n' '\0' | xargs -0 rm --
Explanation:
ls -tp prints the names of filesystem items sorted by how recently they were modified , in descending order (most recently modified items first) (-t), with directories printed with a trailing / to mark them as such (-p).
Note: It is the fact that ls -tp always outputs file / directory names only, not full paths, that necessitates the subshell approach mentioned above for targeting a directory other than the current one ((cd /path/to && ls -tp ...)).
grep -v '/$' then weeds out directories from the resulting listing, by omitting (-v) lines that have a trailing / (/$).
Caveat: Since a symlink that points to a directory is technically not itself a directory, such symlinks will not be excluded.
tail -n +6 skips the first 5 entries in the listing, in effect returning all but the 5 most recently modified files, if any.
Note that in order to exclude N files, N+1 must be passed to tail -n +.
xargs -I {} rm -- {} (and its variations) then invokes on rm on all these files; if there are no matches at all, xargs won't do anything.
xargs -I {} rm -- {} defines placeholder {} that represents each input line as a whole, so rm is then invoked once for each input line, but with filenames with embedded spaces handled correctly.
-- in all cases ensures that any filenames that happen to start with - aren't mistaken for options by rm.
A variation on the original problem, in case the matching files need to be processed individually or collected in a shell array:
# One by one, in a shell loop (POSIX-compliant):
ls -tp | grep -v '/$' | tail -n +6 | while IFS= read -r f; do echo "$f"; done
# One by one, but using a Bash process substitution (<(...),
# so that the variables inside the `while` loop remain in scope:
while IFS= read -r f; do echo "$f"; done < <(ls -tp | grep -v '/$' | tail -n +6)
# Collecting the matches in a Bash *array*:
IFS=$'\n' read -d '' -ra files < <(ls -tp | grep -v '/$' | tail -n +6)
printf '%s\n' "${files[#]}" # print array elements
Remove all but 5 (or whatever number) of the most recent files in a directory.
rm `ls -t | awk 'NR>5'`
(ls -t|head -n 5;ls)|sort|uniq -u|xargs rm
This version supports names with spaces:
(ls -t|head -n 5;ls)|sort|uniq -u|sed -e 's,.*,"&",g'|xargs rm
Simpler variant of thelsdj's answer:
ls -tr | head -n -5 | xargs --no-run-if-empty rm
ls -tr displays all the files, oldest first (-t newest first, -r reverse).
head -n -5 displays all but the 5 last lines (ie the 5 newest files).
xargs rm calls rm for each selected file.
find . -maxdepth 1 -type f -printf '%T# %p\0' | sort -r -z -n | awk 'BEGIN { RS="\0"; ORS="\0"; FS="" } NR > 5 { sub("^[0-9]*(.[0-9]*)? ", ""); print }' | xargs -0 rm -f
Requires GNU find for -printf, and GNU sort for -z, and GNU awk for "\0", and GNU xargs for -0, but handles files with embedded newlines or spaces.
All these answers fail when there are directories in the current directory. Here's something that works:
find . -maxdepth 1 -type f | xargs -x ls -t | awk 'NR>5' | xargs -L1 rm
This:
works when there are directories in the current directory
tries to remove each file even if the previous one couldn't be removed (due to permissions, etc.)
fails safe when the number of files in the current directory is excessive and xargs would normally screw you over (the -x)
doesn't cater for spaces in filenames (perhaps you're using the wrong OS?)
ls -tQ | tail -n+4 | xargs rm
List filenames by modification time, quoting each filename. Exclude first 3 (3 most recent). Remove remaining.
EDIT after helpful comment from mklement0 (thanks!): corrected -n+3 argument, and note this will not work as expected if filenames contain newlines and/or the directory contains subdirectories.
Ignoring newlines is ignoring security and good coding. wnoise had the only good answer. Here is a variation on his that puts the filenames in an array $x
while IFS= read -rd ''; do
x+=("${REPLY#* }");
done < <(find . -maxdepth 1 -printf '%T# %p\0' | sort -r -z -n )
For Linux (GNU tools), an efficient & robust way to keep the n newest files in the current directory while removing the rest:
n=5
find . -maxdepth 1 -type f -printf '%T# %p\0' |
sort -z -nrt ' ' -k1,1 |
sed -z -e "1,${n}d" -e 's/[^ ]* //' |
xargs -0r rm -f
For BSD, find doesn't have the -printf predicate, stat can't output NULL bytes, and sed + awk can't handle NULL-delimited records.
Here's a solution that doesn't support newlines in paths but that safeguards against them by filtering them out:
#!/bin/bash
n=5
find . -maxdepth 1 -type f ! -path $'*\n*' -exec stat -f '%.9Fm %N' {} + |
sort -nrt ' ' -k1,1 |
awk -v n="$n" -F'^[^ ]* ' 'NR > n {printf "%s%c", $2, 0}' |
xargs -0 rm -f
note: I'm using bash because of the $'\n' notation. For sh you can define a variable containing a literal newline and use it instead.
Solution for UNIX & Linux (inspired from AIX/HP-UX/SunOS/BSD/Linux ls -b):
Some platforms don't provide find -printf, nor stat, nor support NUL-delimited records with stat/sort/awk/sed/xargs. That's why using perl is probably the most portable way to tackle the problem, because it is available by default in almost every OS.
I could have written the whole thing in perl but I didn't. I only use it for substituting stat and for encoding-decoding-escaping the filenames. The core logic is the same as the previous solutions and is implemented with POSIX tools.
note: perl's default stat has a resolution of a second, but starting from perl-5.8.9 you can get sub-second resolution with the stat function of the module Time::HiRes (when both the OS and the filesystem support it). That's what I'm using here; if your perl doesn't provide it then you can remove the ‑MTime::HiRes=stat from the command line.
n=5
find . '(' -name '.' -o -prune ')' -type f -exec \
perl -MTime::HiRes=stat -le '
foreach (#ARGV) {
#st = stat($_);
if ( #st > 0 ) {
s/([\\\n])/sprintf( "\\%03o", ord($1) )/ge;
print sprintf( "%.9f %s", $st[9], $_ );
}
else { print STDERR "stat: $_: $!"; }
}
' {} + |
sort -nrt ' ' -k1,1 |
sed -e "1,${n}d" -e 's/[^ ]* //' |
perl -l -ne '
s/\\([0-7]{3})/chr(oct($1))/ge;
s/(["\n])/"\\$1"/g;
print "\"$_\"";
' |
xargs -E '' sh -c '[ "$#" -gt 0 ] && rm -f "$#"' sh
Explanations:
For each file found, the first perl gets the modification time and outputs it along the encoded filename (each newline and backslash characters are replaced with the literals \012 and \134 respectively).
Now each time filename is guaranteed to be single-line, so POSIX sort and sed can safely work with this stream.
The second perl decodes the filenames and escapes them for POSIX xargs.
Lastly, xargs calls rm for deleting the files. The sh command is a trick that prevents xargs from running rm when there's no files to delete.
I realize this is an old thread, but maybe someone will benefit from this. This command will find files in the current directory :
for F in $(find . -maxdepth 1 -type f -name "*_srv_logs_*.tar.gz" -printf '%T# %p\n' | sort -r -z -n | tail -n+5 | awk '{ print $2; }'); do rm $F; done
This is a little more robust than some of the previous answers as it allows to limit your search domain to files matching expressions. First, find files matching whatever conditions you want. Print those files with the timestamps next to them.
find . -maxdepth 1 -type f -name "*_srv_logs_*.tar.gz" -printf '%T# %p\n'
Next, sort them by the timestamps:
sort -r -z -n
Then, knock off the 4 most recent files from the list:
tail -n+5
Grab the 2nd column (the filename, not the timestamp):
awk '{ print $2; }'
And then wrap that whole thing up into a for statement:
for F in $(); do rm $F; done
This may be a more verbose command, but I had much better luck being able to target conditional files and execute more complex commands against them.
If the filenames don't have spaces, this will work:
ls -C1 -t| awk 'NR>5'|xargs rm
If the filenames do have spaces, something like
ls -C1 -t | awk 'NR>5' | sed -e "s/^/rm '/" -e "s/$/'/" | sh
Basic logic:
get a listing of the files in time order, one column
get all but the first 5 (n=5 for this example)
first version: send those to rm
second version: gen a script that will remove them properly
With zsh
Assuming you don't care about present directories and you will not have more than 999 files (choose a bigger number if you want, or create a while loop).
[ 6 -le `ls *(.)|wc -l` ] && rm *(.om[6,999])
In *(.om[6,999]), the . means files, the o means sort order up, the m means by date of modification (put a for access time or c for inode change), the [6,999] chooses a range of file, so doesn't rm the 5 first.
Adaptation of #mklement0's excellent answer with some parameters and without needing to navigate to the folder containing the files to be deleted...
TARGET_FOLDER="/my/folder/path"
FILES_KEEP=5
ls -tp "$TARGET_FOLDER"**/* | grep -v '/$' | tail -n +$((FILES_KEEP+1)) | xargs -d '\n' -r rm --
[Ref(s).: https://stackoverflow.com/a/3572628/3223785 ]
Thanks! 😉
found interesting cmd in Sed-Onliners - Delete last 3 lines - fnd it perfect for another way to skin the cat (okay not) but idea:
#!/bin/bash
# sed cmd chng #2 to value file wish to retain
cd /opt/depot
ls -1 MyMintFiles*.zip > BigList
sed -n -e :a -e '1,2!{P;N;D;};N;ba' BigList > DeList
for i in `cat DeList`
do
echo "Deleted $i"
rm -f $i
#echo "File(s) gonzo "
#read junk
done
exit 0
Removes all but the 10 latest (most recents) files
ls -t1 | head -n $(echo $(ls -1 | wc -l) - 10 | bc) | xargs rm
If less than 10 files no file is removed and you will have :
error head: illegal line count -- 0
To count files with bash
I needed an elegant solution for the busybox (router), all xargs or array solutions were useless to me - no such command available there. find and mtime is not the proper answer as we are talking about 10 items and not necessarily 10 days. Espo's answer was the shortest and cleanest and likely the most unversal one.
Error with spaces and when no files are to be deleted are both simply solved the standard way:
rm "$(ls -td *.tar | awk 'NR>7')" 2>&-
Bit more educational version: We can do it all if we use awk differently. Normally, I use this method to pass (return) variables from the awk to the sh. As we read all the time that can not be done, I beg to differ: here is the method.
Example for .tar files with no problem regarding the spaces in the filename. To test, replace "rm" with the "ls".
eval $(ls -td *.tar | awk 'NR>7 { print "rm \"" $0 "\""}')
Explanation:
ls -td *.tar lists all .tar files sorted by the time. To apply to all the files in the current folder, remove the "d *.tar" part
awk 'NR>7... skips the first 7 lines
print "rm \"" $0 "\"" constructs a line: rm "file name"
eval executes it
Since we are using rm, I would not use the above command in a script! Wiser usage is:
(cd /FolderToDeleteWithin && eval $(ls -td *.tar | awk 'NR>7 { print "rm \"" $0 "\""}'))
In the case of using ls -t command will not do any harm on such silly examples as: touch 'foo " bar' and touch 'hello * world'. Not that we ever create files with such names in real life!
Sidenote. If we wanted to pass a variable to the sh this way, we would simply modify the print (simple form, no spaces tolerated):
print "VarName="$1
to set the variable VarName to the value of $1. Multiple variables can be created in one go. This VarName becomes a normal sh variable and can be normally used in a script or shell afterwards. So, to create variables with awk and give them back to the shell:
eval $(ls -td *.tar | awk 'NR>7 { print "VarName=\""$1"\"" }'); echo "$VarName"
leaveCount=5
fileCount=$(ls -1 *.log | wc -l)
tailCount=$((fileCount - leaveCount))
# avoid negative tail argument
[[ $tailCount < 0 ]] && tailCount=0
ls -t *.log | tail -$tailCount | xargs rm -f
I made this into a bash shell script. Usage: keep NUM DIR where NUM is the number of files to keep and DIR is the directory to scrub.
#!/bin/bash
# Keep last N files by date.
# Usage: keep NUMBER DIRECTORY
echo ""
if [ $# -lt 2 ]; then
echo "Usage: $0 NUMFILES DIR"
echo "Keep last N newest files."
exit 1
fi
if [ ! -e $2 ]; then
echo "ERROR: directory '$1' does not exist"
exit 1
fi
if [ ! -d $2 ]; then
echo "ERROR: '$1' is not a directory"
exit 1
fi
pushd $2 > /dev/null
ls -tp | grep -v '/' | tail -n +"$1" | xargs -I {} rm -- {}
popd > /dev/null
echo "Done. Kept $1 most recent files in $2."
ls $2|wc -l
Modified version of the answer of #Fabien if you want to specify a path. Useful if you're running the script elsewhere.
ls -tr /path/foo/ | head -n -5 | xargs -I% --no-run-if-empty rm /path/foo/%
I have several files that have the same name, but a different extension. For example
echo "array" > A.hpp
echo "..." > A.h
echo "content" > B.hpp
echo "..." > B.h
echo "content" > C.hpp
echo "..." > C.h
I want to get a list of *.h files based on some content in the corresponding *.hpp file. In particular I am looking for a one-liner to open them in my editor.
It is fair to assume that for each *.hpp file the corresponding *.h file exists. Also, since they are source files, it may be assumed that the filenames do not contain whitespaces.
Current approach
I know how to get a list of *.hpp files based on their content. An approach (but surely not the only or the best) is to
find . -type f -iname '*.hpp' -print | xargs grep -i 'content' | cut -d":" -f1
which gives
./B.hpp
./C.hpp
Opening in my editor is then done by
st `find . -type f -iname '*.hpp' -print | xargs grep -i 'content' | cut -d":" -f1`
But how can I get/open the corresponding *.h files?
You say you want to get a list of *.h files based on some content in the corresponding *.hpp file.
while read -r line ; do
echo "${line%.hpp}.h"
done < <(grep -i 'content' *.hpp| cut -d":" -f1)
BashFAQ 001 recommends to use a while loop and read command to read a data stream.
One-liner as requested
st `while IFS= read -r line ; do echo "${line%.hpp}.h"; done < <(grep -i 'content' *.hpp| cut -d":" -f1)`
If you are dealing with filenames containing whitespace, you need to use printf instead of echo.
st `while IFS= read -r line ; do printf '%q' "${line%.hpp}.h"; done < <(grep -i 'content' *.hpp| cut -d":" -f1)`
The %q lets printf format the output so that it can be reused as shell input.
Explanation
You have to read it from behind. First we grep all files ending in .hpp in the current directory for the string 'content' and cut everything but the basename.
The while loop will read the output of grep and assign the basename to the variable line.
Inside the while loop we use bash's parameter substitution to change the file extension from .h to .hpp.
Your question still isn't clear but is this all you're trying to do (using GNU awk for gensub())?
$ awk '/content/{print gensub(/[^.]+$/,"h",1,FILENAME)}' *.hpp
B.h
C.h
I'm trying to teach myself basic file manipulation and scripting in linux but I've hit a wall. Right now I'm trying to output a table that gives something like
FILENAME LINES TYPE
File1 22 File
File2 56 File
Folder1 N/A Directory
when given any directory to search. I've been researching how to format output using awk and using maybe grep and wc to try and get my data but I'm a bit lost. For all I know I'm barking up the wrong tree entirely.
Look at printf to format your output, then look at the commands file to find your file type, wc to print out the number of lines, etc.
All this could be done via a find | while read loop:
printf "%-20.20s %-3.3s %s\n", "File", "Lines", "Type"
find . -type f -print0 | while read -d $'\0' file
do
file_name=$(basename $file)
lines="$(cat $file | wc -l | sed 's/^ *//')"
desc="$(file --brief "$file")"
printf "%-20.20s %3.3s %s\n", "$file_name", $lines, "$desc"
done
The $(...) syntax returns the output of the enclosed command as a string that can be assigned to variable. I use cat $file | wc -l to eliminate the name of the file, and then use sed to remove leading spaces.
I'm having some rather unusual problems using grep in a bash script. Below is an example of the bash script code that I'm using that exhibits the behaviour:
UNIQ_SCAN_INIT_POINT=1
cat "$FILE_BASENAME_LIST" | uniq -d >> $UNIQ_LIST
sed '/^$/d' $UNIQ_LIST >> $UNIQ_LIST_FINAL
UNIQ_LINE_COUNT=`wc -l $UNIQ_LIST_FINAL | cut -d \ -f 1`
while [ -n "`cat $UNIQ_LIST_FINAL | sed "$UNIQ_SCAN_INIT_POINT"'q;d'`" ]; do
CURRENT_LINE=`cat $UNIQ_LIST_FINAL | sed "$UNIQ_SCAN_INIT_POINT"'q;d'`
CURRENT_DUPECHK_FILE=$FILE_DUPEMATCH-$CURRENT_LINE
grep $CURRENT_LINE $FILE_LOCTN_LIST >> $CURRENT_DUPECHK_FILE
MATCH=`grep -c $CURRENT_LINE $FILE_BASENAME_LIST`
CMD_ECHO="$CURRENT_LINE matched $MATCH times," cmd_line_echo
echo "$CURRENT_DUPECHK_FILE" >> $FILE_DUPEMATCH_FILELIST
let UNIQ_SCAN_INIT_POINT=UNIQ_SCAN_INIT_POINT+1
done
On numerous occasions, when grepping for the current line in the file location list, it has put no output to the current dupechk file even though there have definitely been matches to the current line in the file location list (I ran the command in terminal with no issues).
I've rummaged around the internet to see if anyone else has had similar behaviour, and thus far all I have found is that it is something to do with buffered and unbuffered outputs from other commands operating before the grep command in the Bash script....
However no one seems to have found a solution, so basically I'm asking you guys if you have ever come across this, and any idea/tips/solutions to this problem...
Regards
Paul
The `problem' is the standard I/O library. When it is writing to a terminal
it is unbuffered, but if it is writing to a pipe then it sets up buffering.
try changing
CURRENT_LINE=`cat $UNIQ_LIST_FINAL | sed "$UNIQ_SCAN_INIT_POINT"'q;d'`
to
CURRENT LINE=`sed "$UNIQ_SCAN_INIT_POINT"'q;d' $UNIQ_LIST_FINAL`
Are there any directories with spaces in their names in $FILE_LOCTN_LIST? Because if they are, those spaces will need escaped somehow. Some combination of find and xargs can usually deal with that for you, especially xargs -0
A small bash script using md5sum and sort that detects duplicate files in the current directory:
CURRENT="" md5sum * |
sort |
while read md5sum filename;
do
[[ $CURRENT == $md5sum ]] && echo $filename is duplicate;
CURRENT=$md5sum;
done
you tagged linux, some i assume you have tools like GNU find,md5sum,uniq, sort etc. here's a simple example to find duplicate files
$ echo "hello world">file
$ md5sum file
6f5902ac237024bdd0c176cb93063dc4 file
$ cp file file1
$ md5sum file1
6f5902ac237024bdd0c176cb93063dc4 file1
$ echo "blah" > file2
$ md5sum file2
0d599f0ec05c3bda8c3b8a68c32a1b47 file2
$ find . -type f -exec md5sum "{}" \; |sort -n | uniq -w32 -D
6f5902ac237024bdd0c176cb93063dc4 ./file
6f5902ac237024bdd0c176cb93063dc4 ./file1
How do I use grep to perform a search which, when a match is found, will print the file name as well as the first n characters in that file? Note that n is a parameter that can be specified and it is irrelevant whether the first n characters actually contains the matching string.
grep -l pattern *.txt |
while read line; do
echo -n "$line: ";
head -c $n "$line";
echo;
done
Change -c to -n if you want to see the first n lines instead of bytes.
You need to pipe the output of grep to sed to accomplish what you want. Here is an example:
grep mypattern *.txt | sed 's/^\([^:]*:.......\).*/\1/'
The number of dots is the number of characters you want to print. Many versions of sed often provide an option, like -r (GNU/Linux) and -E (FreeBSD), that allows you to use modern-style regular expressions. This makes it possible to specify numerically the number of characters you want to print.
N=7
grep mypattern *.txt /dev/null | sed -r "s/^([^:]*:.{$N}).*/\1/"
Note that this solution is a lot more efficient that others propsoed, which invoke multiple processes.
There are few tools that print 'n characters' rather than 'n lines'. Are you sure you really want characters and not lines? The whole thing can perhaps be best done in Perl. As specified (using grep), we can do:
pattern="$1"
shift
n="$2"
shift
grep -l "$pattern" "$#" |
while read file
do
echo "$file:" $(dd if="$file" count=${n}c)
done
The quotes around $file preserve multiple spaces in file names correctly. We can debate the command line usage, currently (assuming the command name is 'ngrep'):
ngrep pattern n [file ...]
I note that #litb used 'head -c $n'; that's neater than the dd command I used. There might be some systems without head (but they'd pretty archaic). I note that the POSIX version of head only supports -n and the number of lines; the -c option is probably a GNU extension.
Two thoughts here:
1) If efficiency was not a concern (like that would ever happen), you could check $status [csh] after running grep on each file. E.g.: (For N characters = 25.)
foreach FILE ( file1 file2 ... fileN )
grep targetToMatch ${FILE} > /dev/null
if ( $status == 0 ) then
echo -n "${FILE}: "
head -c25 ${FILE}
endif
end
2) GNU [FSF] head contains a --verbose [-v] switch. It also offers --null, to accomodate filenames with spaces. And there's '--', to handle filenames like "-c". So you could do:
grep --null -l targetToMatch -- file1 file2 ... fileN |
xargs --null head -v -c25 --