I have this script :
#!/bin/bash
ps -eo lstart,pid,cmd --sort lstart | while read line 2> /dev/null
do
if [ "$(date -d "${line::24}" "+%Y%m%d%H%M%S")" -gt "$(date -d "Thu Apr 7 00:55:38" "+%Y%m%d%H%M%S")" ] 2> /dev/null
then echo "Date : $(date -d "${line::24}" "+%d/%m/%Y %H:%M:%S") | PID & CMD : ${line:25:29}" >> process.log 2> /dev/null
fi 2> /dev/null
done
sort process.log | uniq > process.log
#sort process.log | uniq -u | tee process.log
My script runs automatically every 10 seconds, so I would like the identical lines to be deleted. As you can see, I tried with uniq but it doesn't work. I would like all lines in my file to be deleted if they are identical.
As I did, the second time the script is executed, there is nothing in the output file and I don't understand why.
I would also like nothing to be displayed in my terminal when the script runs. I used tee but when executing the uniq command, it returns an output in my terminal... How to remove it?
I thank you in advance for your help and wish you a good day
Thanks a lot
You should not parse ps output ever, especially not of lstart. Also, you are running date in the loop all the time, again and again.
I think something along this would be better to do:
some_date=$(date -d "Thu Apr 7 00:55:38" +%s)
now=$(date +%s)
how_much_time_ago=$(( now - some_date ))
ps -eo etimes,pid,cmd --sort etimes |
awk -v v="$how_much_time_ago" '$1 > v' |
while IFS=' ' read line etimes pid cmd; do
printf "Date : %s | PID & CMD : %s %s\n" \
"$(date -d "$((now - etimes))" "+%d/%m/%Y %H:%M:%S")" \
"$pid" "$cmd"
done |
sort |
uniq > process.log
Note that you can pipe the output of a while .... done | stuff loop to another thing normally. Instead of sprinkling 2>/dev/null everywhere, try to actually solve the issue, not hide the error.
I want to find out processes running more than 3 hrs, I have written a command for this but it's not returning expected output
ps -u <user> -o pid,stime,pcpu,pmem,etime,cmd --sort=start_time | \
grep <searchString> | grep -v grep| awk '{print $5}' | \
sed 's/:|-/ /g;'| awk '{print $4" "$3" "$2" "$1"}' | \
awk '$1+$2*60+$3*3600+$4*86400 > 10800'
but it's printing the values of etime in output. But expected output is, command should print the values of "pid,stime,pcpu,pmem,etime,cmd"
I am not able to find exact issue with this.
You are executing "awk '{print $5}'" which is taking in the input and printing out only column 5 which in your case is "etime" , everything from this point on is lost.
If your system supports etimes (notice the s on the end), you can easily do this with
ps -eo pid,etimes,etime,comm,user,tty | awk '{if ( $2>10800) print $0}'
on a system not supporting etimes which has a standard output of etime which hh:mm:ss or just mm:ss if no hours have passed
ps -eo pid,etime,comm,user,tty | awk '{seconds_old=10800 ; split($2,a,":",sep) ; if(length(a) < 3) b = (a[1] *60) + (a[2]) ; else b=((a[1]*3600) + (a[2] *60) + (a[3])) ; if(b > seconds_old ) print $0}'
Adjust "seconds_old" to change the age you want to test for:
There are various other methods of doing this using Find for example:
explained here:
https://serverfault.com/questions/181477/how-do-i-kill-processes-older-than-t
However, the solution should match your expected output
Try this:
ps -u <user> -o pid,stime,pcpu,pmem,etime=,cmd --sort=start_time|grep <searchString>|while read z;do tago=$(echo $z|awk '{print $5}'|sed -E 's/(:|-)/ /g'| awk '{print $4+$3*60+$2*3600+$1*86400}');if [ $tago -ge 10800 ];then echo $z;fi;done
It prints only processes >= 10800 secs old.
You can readjust the output further to fit your needs.
Able to find running process for more than 3 hrs with below command.
ps -u <user> -o pid,stime,pcpu,pmem,etime,cmd --sort=start_time |grep -v grep|awk 'substr($0,23,2) > 3'
So I am trying to check the internal CPU and RAM usage from JVM's.
The set up is that we have a single server which hosts 39 JVM's each running its own service and has it's own unique CPU & RAM allocation. So for example it could be set up like the following:
CPU(Cores) RAM(MB)
JVM1 2 300
JVM2 1 50
JVM3 5 1024
These are fictional as I don't have the actual values to hand.
I know the PID's for each of the JVM's but I am wondering how would I see the CPU and RAM usage of each JVM on it's own dissregarding the Host systems usage. Also is it possible to pass multiple PID's into a jstat -gc as I will be looking to script this?.
I know that if I use:
ps -p <PID> -o %CPU %RAM
That will give me the CPU and RAM of that process on the host machine.
Any Help is greatly appreciated.
After playing around for a while I came up with the following script which pulls the memory usage and total memory in use to 2DP:
Script
#!/bin/sh
service=$(mktemp)
jstatop=$(mktemp)
ServiceStatsPre=$(mktemp)
datet=$(date +%Y-%m-%d)
hourt=$(date +%H)
ps -ef | grep java | grep Service | awk '{key=substr($9,31,match($9,"#")-31); serv[key]++}END{for(name in serv){if($9 ~ /Service/){print name}}}'>$service
printf "%-8sService\t\t\t\t%7s PID\t%7s Used\t%7s Total\n" > $ServiceStatsPre
filename=$service
while read -r line; do
if [ ! -z $line ]; then
pid=$(ps -ef | grep java | grep Service |awk -v svc="$line" '{if (match($9,svc)){print $2}}')
rncnt=0
rnag=1
while [ $rnag -eq 1 ]; do
jstat -gc $pid > $jstatop
if [ $? -ne 0 ]; then
sleep 5;
rncnt++;
else
rnag=0
fi
if [ $rncnt -eq 5 ]; then
rnag=0
fi
done
cat $jstatop | awk '{if (NR !=1) print}'|awk -v pid="$pid" -v svc="$line" -v d="$datet" -v h="$hourt" '{printf("%-40s %7d %6.2fMB %6.2fMB %11s %3s\n",svc,pid,($1+$5+$7)/1024,($3+$4+$6+$8)/1024,d,h)}' >> $ServiceStatsPre
fi
done < $filename
#printf "Date,Hour,Service,Used,Total\n" > Service_Stats.csv #Uncomment this line on initial Run to create file with headders
cat $ServiceStatsPre | awk '{if (NR !=1) print}' |
awk '{
printf("%-1s,%1s,%1s,%4.2f,%4.2f\n",$5,$6,$1,$3,$4);
}' >> Service_Stats.csv
rm $service;
rm $jstatop;
rm $ServiceStatsPre;
Breakdown
ps -ef | grep java | grep Service | awk '{key=substr($9,31,match($9,"#")-31); serv[key]++}END{for(name in serv){if($9 ~ /Service/){print name}}}'>$service
This is returning the name of the Service and putting it to a tempary file $service
printf "%-8sService\t\t\t\t%7s PID\t%7s Used\t%7s Total\n" > $ServiceStatsPre
This is just creating Headings in a Temp file $ServiceStatsPre (I know this isn't needed but I was originally using it to debug to a file not a temp file)
Outer While loop
filename=$service
if [ ! -z $line ]; then
while read -r line; do
pid=$(ps -ef | grep java | grep Service |awk -v svc="$line" '{if (match($9,svc)){print $2}}')
rncnt=0
rnag=1
...
cat $jstatop | awk '{if (NR !=1) print}'|awk -v pid="$pid" -v svc="$line" -v d="$datet" -v h="$hourt" '{printf("%-40s %7d %6.2fMB %6.2fMB %11s %3s\n",svc,pid,($1+$5+$7)/1024,($3+$4+$6+$8)/1024,d,h)}' >> $ServiceStatsPre
fi
done < $filename
This is first checking to see if the line that it is passing in is not empty (if [ ! -z $line ]; then) then it is extracting the PID for each of the services in the temp file $service and is setting a check (rnag) + retry counter (rncnt). The final part of this outer while loop is calculating the stats, memory usage in MB (($1+$5+$7)/1024), Total Memory used (($3+$4+$6+$8)/1024) as well as retuning the PID,Service Name,Date and Hour.
Inner While Loop
...
while [ $rnag -eq 1 ]; do
jstat -gc $pid > $jstatop
if [ $? -ne 0 ]; then
sleep 5;
rncnt++;
else
rnag=0
fi
if [ $rncnt -eq 5 ]; then
rnag=0
fi
done
...
This is to basically ensure that the jstat is running correctly and isn't returning an error.
The final part of this script:
#printf "Date,Hour,Service,Used,Total\n" > Service_Stats.csv #Uncomment this line on initial Run to create file with headders
cat $ServiceStatsPre | awk '{if (NR !=1) print}' |
awk '{
printf("%-1s,%1s,%1s,%4.2f,%4.2f\n",$5,$6,$1,$3,$4);
}' >> Service_Stats.csv
is just to resolve the formatting and put it into a format so that it can be used in a CSV.
Output
This script out puts like the following:
Date,Hour,Service,Used,Total
2016-07-03,07,undMFSAdapterServiceVM,331.00,188.87
2016-07-03,07,entSCSServiceVM,332.50,278.19
2016-07-03,07,kServiceVM,457.50,132.91
2016-07-03,07,ServiceTuTrackVm,432.00,282.66
2016-07-03,07,ter1WMSAdapterServiceVm,233.00,77.02
2016-07-03,07,kingMFSAdapterServiceVM,451.50,126.69
2016-07-03,07,erBuilderServiceVM,261.50,211.27
2016-07-03,07,ter3MFSAdapterServiceVM,449.50,210.23
2016-07-03,07,rServiceVM1,1187.00,529.26
2016-07-03,07,rServiceVM2,597.50,398.43
2016-07-03,07,rServiceVM3,2786.00,819.30
2016-07-03,07,rServiceVM4,451.50,163.13
2016-07-03,07,MessagingServiceVm,457.50,357.11
2016-07-03,07,viceVM,444.50,263.59
2016-07-03,07,ServiceVM,1910.50,909.19
2016-07-03,07,undPackingMFSAdapterServiceVM,208.00,113.51
2016-07-03,07,gisticLockServiceVM,245.00,173.05
2016-07-03,07,kingMFSAdapterServiceVM,781.50,327.13
2016-07-03,07,ferWMSAdapterServiceVm,196.00,84.02
2016-07-03,07,geMFSAdapterServiceVM,499.50,256.91
2016-07-03,07,ferMFSAdapterServiceVM,456.50,246.89
2016-07-03,07,kingWMSAdapterServiceVm,195.00,73.70
2016-07-03,07,AdapterServiceVm,149.50,72.62
2016-07-03,07,ter2MFSAdapterServiceVM,455.00,136.02
2016-07-03,07,ionServiceVM,484.00,240.46
2016-07-03,07,ter3WMSAdapterServiceVm,266.00,138.70
2016-07-03,07,iceVm,135.50,106.07
2016-07-03,07,viceVm,3317.00,1882.15
2016-07-03,07,entBCSServiceVM,356.50,143.93
2016-07-03,07,ServiceVm,951.00,227.12
2016-07-03,07,lingServiceVM,145.50,76.61
2016-07-03,07,entDBHServiceVM,182.50,4.63
2016-07-03,07,kingWMSAdapterServiceVm,208.00,103.13
2016-07-03,07,gingServiceVM,1529.50,235.84
2016-07-03,07,ServiceVM,249.50,131.78
2016-07-03,07,ter1MFSAdapterServiceVM,453.00,394.11
2016-07-03,07,AdapterServiceVM,461.00,208.41
2016-07-03,07,ter2WMSAdapterServiceVm,178.50,79.93
2016-07-03,07,AdapterServiceVm,395.00,131.08
2016-07-03,07,ingServiceVM,184.50,126.28
The $3 has been trimmed just to hide service names etc..
Helpful Links
A nice explanation of jstat -gc output
I am trying to figure out how to extract the cpu core utilization for a SINGLE process in linux and parse it. I know that I can get the overall core utilization via top and then press "1". I am already able to parse that. However, now I want to do the same thing for a single process. I tried it with ps and calculating the core utilization myself but I am not so sure if my script is accurate enough, something seems off. (Note that this version calculates overall core utilization since it is WIP) I get errors like this after a while in my terminal:
test.sh: line 31: +: syntax error: operand expected (error token is
"+")
I cannot figure out why this error just randomly occurs.
#!/bin/env bash
read -p "Enter PID to observe:" pid
run=false
ps -p $pid -L -o cputime,etime,psr,pcpu
for (( u = 1 ; u <= 100 ; u++ ))
do
lines=$(ps -p $pid -L -o psr,pcpu | awk 'END{print NR}')
for (( i=1; i<=$lines; i++))
do
core=$(ps -p $pid -L -o psr,pcpu | awk 'NR=='$i'{print $1}')
if [ $run == false ]
then cpuTimeS=+$(ps -p $pid -L -o cputime,etime | awk 'NR=='$i'{print $1}' | awk -F : '{ printf("%.2f\n", $1*60+$2*60+$3); }')
elapsedTimeS=+$(ps -p $pid -L -o cputime,etime | awk 'NR=='$i'{print $2}' | awk -F : '{ printf("%.2f\n", $1*60+$2*60+$3); }')
cpuTimeSi=${cpuTimeS%.*}
elapsedTimeSi=${elapsedTimeS%.*}
cpuTimeSiResult=$(( cpuTimeSi + cpuTimeSiResult ))
elapsedTimeSiResult=$(( elapsedTimeSi + elapsedTimeSiResult ))
else
cpuTimeE=+$(ps -p $pid -L -o cputime,etime | awk 'NR=='$i'{print $1}' | awk -F : '{ printf("%.2f\n", $1*60+$2*60+$3); }')
elapsedTimeE=+$(ps -p $pid -L -o cputime,etime | awk 'NR=='$i'{print $2}' | awk -F : '{ printf("%.2f\n", $1*60+$2*60+$3); }')
cpuTimeEi=${cpuTimeE%.*}
elapsedTimeEi=${elapsedTimeE%.*}
cpuTimeEiResult=$(( cpuTimeEi + cpuTimeEiResult ))
elapsedTimeEiResult=$(( elapsedTimeEi + elapsedTimeEiResult ))
fi
done
if [ "$run" = true ]
then result=$( echo "scale=2; ($cpuTimeEiResult - $cpuTimeSiResult) / ($elapsedTimeEiResult - $elapsedTimeSiResult) * 100.0" | bc)
echo "RESULT:" $result
echo "cpuTimeSTART:" $cpuTimeSiResult
echo "elapsedTimeSTART:" $elapsedTimeSiResult
echo "cpuTimeEND:" $cpuTimeEiResult
echo "elapsedTimeEND:" $elapsedTimeEiResult
fi
sleep 1
if [ "$run" = false ]
then run=true
else
run=false
fi
done
Are there any ideas on how I could solve this better?
I am glad for any advice
Looking at your actual request to get the CPU utilization from a particular process; this could be done in less lines; e.g. below is the CPU usage after giving a seq command.
#using the process name
$ ps -C seq -o %cpu
%CPU
10.4
#using the process id
$ ps -p 5710 -o %cpu
%CPU
10.4
I want to extract from the command ping -c 4 www.stackoverflow.com | tail -1| awk '{print $4}'
the average time.
107.921/108.929/110.394/0.905 ms
Output should be: 108.929
One way is to just add a cut to what you have there.
ping -c 4 www.stackoverflow.com | tail -1| awk '{print $4}' | cut -d '/' -f 2
ping -c 4 www.stackoverflow.com | tail -1| awk -F '/' '{print $5}' would work fine.
"-F" option is used to specify the field separator.
This might work for you:
ping -c 4 www.stackoverflow.com | sed '$!d;s|.*/\([0-9.]*\)/.*|\1|'
The following solution uses Bash only (requires Bash 3):
[[ $(ping -q -c 4 www.example.com) =~ \ =\ [^/]*/([0-9]+\.[0-9]+).*ms ]] \
&& echo ${BASH_REMATCH[1]}
For the regular expression it's easier to read (and handle) if it is stored in a variable:
regex='= [^/]*/([0-9]+\.[0-9]+).*ms'
[[ $(ping -q -c 4 www.example.com) =~ $regex ]] && echo ${BASH_REMATCH[1]}
Promoting luissquall's very elegent comment to an answer:
ping -c 4 www.stackoverflow.com | awk -F '/' 'END {print $5}'
Direct extract mean time from ping command:
ping -w 4 -q www.duckduckgo.com | cut -d "/" -s -f5
Options:
-w time out 4 seconds
-q quite mode
-d delimiter
-s skip line without delimiter
-f No. of field - depends on your system - sometimes 5th, sometimes 4th
I personly use is this way:
if [ $(ping -w 2 -q www.duckduckgo.com | cut -d "/" -s -f4 | cut -d "." -f1) -lt 20 ]; then
echo "good response time"
else
echo "bad response time"
fi
Use these to get current ping as a single number:
123.456:
ping -w1 -c1 8.8.8.8 | tail -1| cut -d '=' -f 2 | cut -d '/' -f 2
123:
ping -w1 -c1 8.8.8.8 | tail -1| cut -d '=' -f 2 | cut -d '/' -f 2 | cut -d '.' -f 1
Note that this displays the average of only 1 ping (-c1), you can increase the sample size by increasing this number (i.e. -c1337)
This avoids using awk (like #Buggabill posted), which doesn't play nice in bash aliases + takes a nanosecond longer
None of these worked well for me due to various issues such as when a timeout occurs. I only wanted to see bad ping times or timeouts and wanted PING to continue quickly, and none of these solutions worked. Here's my BASH script that works well to do both. Note that in the ping command, response time is limited to 1 second.
I realize this does not directly answer the OP's question, however it does provide a good way to deal with some issues that occur with some of the incomplete "solutions" provided here, thus going beyond the scope of the OPs question, which others coming here are looking for (I cite myself as an example), so I decided to share for those people, not specifically OP's question.
while true
do
###Set your IP amd max milliseconds###
ip="192.168.1.53"
maxms=50
###do not edit below###
err="100% packet loss"
out="$(ping -c 1 -i 1 -w 1 $ip)"
t="$(echo $out | awk -F '/' 'END {print $5}')"
t=${t%.*}
re='^[0-9]+$'
if ! [[ $t =~ $re ]] ; then
if [[ $out == *"$err"* ]] ; then
echo "`date` | ${ip}: TIMEOUT"
else
echo "error: Not a number: ${t} was found in: ${out}"
fi
else
if [ "$t" -gt $maxms ]; then
echo "`date` | ${ip}: ${t} ms"
fi
fi
done