I want similar option like getche() in C. How can I read just a single character input from command line?
Using read command can we do it?
In bash, read can do it:
read -n1 ans
read -n1 works for bash
The stty raw mode prevents ctrl-c from working and can get you stuck in an input loop with no way out. Also the man page says stty -raw is not guaranteed to return your terminal to the same state.
So, building on dtmilano's answer using stty -icanon -echo avoids those issues.
#/bin/ksh
## /bin/{ksh,sh,zsh,...}
# read_char var
read_char() {
stty -icanon -echo
eval "$1=\$(dd bs=1 count=1 2>/dev/null)"
stty icanon echo
}
read_char char
echo "got $char"
In ksh you can basically do:
stty raw
REPLY=$(dd bs=1 count=1 2> /dev/null)
stty -raw
read -n1
reads exactly one character from input
echo "$REPLY"
prints the result on the screen
doc: https://www.computerhope.com/unix/bash/read.htm
Some people mean with "input from command line" an argument given to the command instead reading from STDIN... so please don't shoot me. But i have a (maybe not most sophisticated) solution for STDIN, too!
When using bash and having the data in a variable you can use parameter expansion
${parameter:offset:length}
and of course you can perform that on given args ($1, $2, $3, etc.)
Script
#!/usr/bin/env bash
testdata1="1234"
testdata2="abcd"
echo ${testdata1:0:1}
echo ${testdata2:0:1}
echo ${1:0:1} # argument #1 from command line
Execution
$ ./test.sh foo
1
a
f
reading from STDIN
Script
#!/usr/bin/env bash
echo please type in your message:
read message
echo 1st char: ${message:0:1}
Execution
$ ./test.sh
please type in your message:
Foo
1st char: F
Related
I have the following shell script. The purpose is to loop thru each line of the target file (whose path is the input parameter to the script) and do work against each line. Now, it seems only work with the very first line in the target file and stops after that line got processed. Is there anything wrong with my script?
#!/bin/bash
# SCRIPT: do.sh
# PURPOSE: loop thru the targets
FILENAME=$1
count=0
echo "proceed with $FILENAME"
while read LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done < $FILENAME
echo "\ntotal $count targets"
In do_work.sh, I run a couple of ssh commands.
The problem is that do_work.sh runs ssh commands and by default ssh reads from stdin which is your input file. As a result, you only see the first line processed, because the command consumes the rest of the file and your while loop terminates.
This happens not just for ssh, but for any command that reads stdin, including mplayer, ffmpeg, HandBrakeCLI, httpie, brew install, and more.
To prevent this, pass the -n option to your ssh command to make it read from /dev/null instead of stdin. Other commands have similar flags, or you can universally use < /dev/null.
A very simple and robust workaround is to change the file descriptor from which the read command receives input.
This is accomplished by two modifications: the -u argument to read, and the redirection operator for < $FILENAME.
In BASH, the default file descriptor values (i.e. values for -u in read) are:
0 = stdin
1 = stdout
2 = stderr
So just choose some other unused file descriptor, like 9 just for fun.
Thus, the following would be the workaround:
while read -u 9 LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done 9< $FILENAME
Notice the two modifications:
read becomes read -u 9
< $FILENAME becomes 9< $FILENAME
As a best practice, I do this for all while loops I write in BASH.
If you have nested loops using read, use a different file descriptor for each one (9,8,7,...).
More generally, a workaround which isn't specific to ssh is to redirect standard input for any command which might otherwise consume the while loop's input.
while read -r line; do
((count++))
echo "$count $line"
sh ./do_work.sh "$line" </dev/null
done < "$filename"
The addition of </dev/null is the crucial point here, though the corrected quoting is also somewhat important for robustness; see also When to wrap quotes around a shell variable?. You will want to use read -r unless you specifically require the slightly odd legacy behavior you get for backslashes in the input without -r. Finally, avoid upper case for your private variables.
Another workaround of sorts which is somewhat specific to ssh is to make sure any ssh command has its standard input tied up, e.g. by changing
ssh otherhost some commands here
to instead read the commands from a here document, which conveniently (for this particular scenario) ties up the standard input of ssh for the commands:
ssh otherhost <<'____HERE'
some commands here
____HERE
ssh -n option prevents checking the exit status of ssh when using HEREdoc while piping output to another program.
So use of /dev/null as stdin is preferred.
#!/bin/bash
while read ONELINE ; do
ssh ubuntu#host_xyz </dev/null <<EOF 2>&1 | filter_pgm
echo "Hi, $ONELINE. You come here often?"
process_response_pgm
EOF
if [ ${PIPESTATUS[0]} -ne 0 ] ; then
echo "aborting loop"
exit ${PIPESTATUS[0]}
fi
done << input_list.txt
This was happening to me because I had set -e and a grep in a loop was returning with no output (which gives a non-zero error code).
I have the following shell script. The purpose is to loop thru each line of the target file (whose path is the input parameter to the script) and do work against each line. Now, it seems only work with the very first line in the target file and stops after that line got processed. Is there anything wrong with my script?
#!/bin/bash
# SCRIPT: do.sh
# PURPOSE: loop thru the targets
FILENAME=$1
count=0
echo "proceed with $FILENAME"
while read LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done < $FILENAME
echo "\ntotal $count targets"
In do_work.sh, I run a couple of ssh commands.
The problem is that do_work.sh runs ssh commands and by default ssh reads from stdin which is your input file. As a result, you only see the first line processed, because the command consumes the rest of the file and your while loop terminates.
This happens not just for ssh, but for any command that reads stdin, including mplayer, ffmpeg, HandBrakeCLI, httpie, brew install, and more.
To prevent this, pass the -n option to your ssh command to make it read from /dev/null instead of stdin. Other commands have similar flags, or you can universally use < /dev/null.
A very simple and robust workaround is to change the file descriptor from which the read command receives input.
This is accomplished by two modifications: the -u argument to read, and the redirection operator for < $FILENAME.
In BASH, the default file descriptor values (i.e. values for -u in read) are:
0 = stdin
1 = stdout
2 = stderr
So just choose some other unused file descriptor, like 9 just for fun.
Thus, the following would be the workaround:
while read -u 9 LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done 9< $FILENAME
Notice the two modifications:
read becomes read -u 9
< $FILENAME becomes 9< $FILENAME
As a best practice, I do this for all while loops I write in BASH.
If you have nested loops using read, use a different file descriptor for each one (9,8,7,...).
More generally, a workaround which isn't specific to ssh is to redirect standard input for any command which might otherwise consume the while loop's input.
while read -r line; do
((count++))
echo "$count $line"
sh ./do_work.sh "$line" </dev/null
done < "$filename"
The addition of </dev/null is the crucial point here, though the corrected quoting is also somewhat important for robustness; see also When to wrap quotes around a shell variable?. You will want to use read -r unless you specifically require the slightly odd legacy behavior you get for backslashes in the input without -r. Finally, avoid upper case for your private variables.
Another workaround of sorts which is somewhat specific to ssh is to make sure any ssh command has its standard input tied up, e.g. by changing
ssh otherhost some commands here
to instead read the commands from a here document, which conveniently (for this particular scenario) ties up the standard input of ssh for the commands:
ssh otherhost <<'____HERE'
some commands here
____HERE
ssh -n option prevents checking the exit status of ssh when using HEREdoc while piping output to another program.
So use of /dev/null as stdin is preferred.
#!/bin/bash
while read ONELINE ; do
ssh ubuntu#host_xyz </dev/null <<EOF 2>&1 | filter_pgm
echo "Hi, $ONELINE. You come here often?"
process_response_pgm
EOF
if [ ${PIPESTATUS[0]} -ne 0 ] ; then
echo "aborting loop"
exit ${PIPESTATUS[0]}
fi
done << input_list.txt
This was happening to me because I had set -e and a grep in a loop was returning with no output (which gives a non-zero error code).
I have the following shell script. The purpose is to loop thru each line of the target file (whose path is the input parameter to the script) and do work against each line. Now, it seems only work with the very first line in the target file and stops after that line got processed. Is there anything wrong with my script?
#!/bin/bash
# SCRIPT: do.sh
# PURPOSE: loop thru the targets
FILENAME=$1
count=0
echo "proceed with $FILENAME"
while read LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done < $FILENAME
echo "\ntotal $count targets"
In do_work.sh, I run a couple of ssh commands.
The problem is that do_work.sh runs ssh commands and by default ssh reads from stdin which is your input file. As a result, you only see the first line processed, because the command consumes the rest of the file and your while loop terminates.
This happens not just for ssh, but for any command that reads stdin, including mplayer, ffmpeg, HandBrakeCLI, httpie, brew install, and more.
To prevent this, pass the -n option to your ssh command to make it read from /dev/null instead of stdin. Other commands have similar flags, or you can universally use < /dev/null.
A very simple and robust workaround is to change the file descriptor from which the read command receives input.
This is accomplished by two modifications: the -u argument to read, and the redirection operator for < $FILENAME.
In BASH, the default file descriptor values (i.e. values for -u in read) are:
0 = stdin
1 = stdout
2 = stderr
So just choose some other unused file descriptor, like 9 just for fun.
Thus, the following would be the workaround:
while read -u 9 LINE; do
let count++
echo "$count $LINE"
sh ./do_work.sh $LINE
done 9< $FILENAME
Notice the two modifications:
read becomes read -u 9
< $FILENAME becomes 9< $FILENAME
As a best practice, I do this for all while loops I write in BASH.
If you have nested loops using read, use a different file descriptor for each one (9,8,7,...).
More generally, a workaround which isn't specific to ssh is to redirect standard input for any command which might otherwise consume the while loop's input.
while read -r line; do
((count++))
echo "$count $line"
sh ./do_work.sh "$line" </dev/null
done < "$filename"
The addition of </dev/null is the crucial point here, though the corrected quoting is also somewhat important for robustness; see also When to wrap quotes around a shell variable?. You will want to use read -r unless you specifically require the slightly odd legacy behavior you get for backslashes in the input without -r. Finally, avoid upper case for your private variables.
Another workaround of sorts which is somewhat specific to ssh is to make sure any ssh command has its standard input tied up, e.g. by changing
ssh otherhost some commands here
to instead read the commands from a here document, which conveniently (for this particular scenario) ties up the standard input of ssh for the commands:
ssh otherhost <<'____HERE'
some commands here
____HERE
ssh -n option prevents checking the exit status of ssh when using HEREdoc while piping output to another program.
So use of /dev/null as stdin is preferred.
#!/bin/bash
while read ONELINE ; do
ssh ubuntu#host_xyz </dev/null <<EOF 2>&1 | filter_pgm
echo "Hi, $ONELINE. You come here often?"
process_response_pgm
EOF
if [ ${PIPESTATUS[0]} -ne 0 ] ; then
echo "aborting loop"
exit ${PIPESTATUS[0]}
fi
done << input_list.txt
This was happening to me because I had set -e and a grep in a loop was returning with no output (which gives a non-zero error code).
I know that user input can be read silently using bash with read -s someVar and I was wondering if there is a /bin/sh equivalent that allows user input without displaying it on the command line?
Note: I am just curious if /bin/sh read supports this feature somehow.
Use the stty command to turn off echoing of typed characters.
get_entry () {
printf "Choose: "
stty -echo
IFS= read -r choice
stty echo
printf '\n'
}
get_entry
printf "You chose %s\n" "$choice"
How can I catch the CTRL+D keyboard in ksh and after exit?
while true; do
read cmd
echo $cmd
if [ "$cmd" = "?????" ]; then
break
fi
done
CTRL-D is "end-of-file (EOF)" and what you need to do is "trap" that input. Unfortunately, there isn't a EOF character -- when you hit the chord CTRL-D, the tty sends a signal to the reading application that the input stream has finished by returning a sentinel value to make it exit.
To prevent this character from being treated as further input, it has to be an special character (e.g. something out of range like -1). When the terminal detects such a character, it buffers all its characters so that the input is empty, which in turn makes your program read zero bytes (end of file).
You may be running into an issue because the read command exits when receiving eof, so your script was likely terminating before getting to your conditional. This has the side effect of breaking out of the script, but likely not in the way you wanted.
Try:
#!/usr/bin/env ksh
# unmap so we can control the behavior
stty eof ^D
while true; do
read cmd
echo $cmd
# are we out of input? let's get a taco
if [ ! -n "$cmd" ]; then
echo 'taco time'
fi
done
When you get to other signals (like ^C) the general form is:
trap [commands] [signals to catch]
Just use while read:
while read cmd; do
echo $cmd
done