I am a new Archer, and when I compile wireless driver on my computer, I come across a problem:
make: *** /lib/modules/3.1.4-1-ARCH/build: No such file or directory. Stop.
My wireless firmware is Broadcom BCM4313, and I have installed linux-headers-3.1.5-1 in my computer. I do not know how to solve this problem.
Here is some information about my system:
$ uname -a
Linux myhost 3.1.4-1-ARCH #1 SMP PREEMPT Tue Nov 29 09:08:04 UTC 2011 i686 AMD Phenom(tm) II N930 Quad-Core Processor AuthenticAMD GNU/Linux
$ ls /lib/modules/3.1.4-1-ARCH
extramodules modules.dep modules.order
kernel modules.dep.bin modules.pcimap
modules.alias modules.devname modules.seriomap
modules.alias.bin modules.ieee1394map modules.softdep
modules.builtin modules.inputmap modules.symbols
modules.builtin.bin modules.isapnpmap modules.symbols.bin
modules.ccwmap modules.ofmap modules.usbmap
I recommend you use broadcom-wl package. It works for me with broadcom 4312 (I know you have 4313, but i'm taking a wild guess it should work for you too). The module name will be wl. It's the closed source driver because the open source driver sometimes takes up to 100% of my CPU for some reason.
Installing packages from AUR: https://wiki.archlinux.org/index.php/Arch_User_Repository#Installing_packages
Related
I followed the instructions in this video to compile the Linux kernel for WSL with video drivers. The kernel is running and I do have access to /dev/video0 which was the whole point.
I can also confirm that the correct kernel is running with uname -a, which gives the following output:
Linux DESKTOP-V575QHO 5.15.74.2-microsoft-standard-WSL2+ #1 SMP Wed Dec 7 14:57:03 CET 2022 x86_64 x86_64 x86_64 GNU/Linux
I now installed dkms and used it to compile the akvcam module (a virtual camera driver). Both make and make dkms_install exited successfully.
However, when I'm actually trying to install the module using insmod /lib/modules/$(uname -r)/updates/dkms/akvcam.ko I get the following error:
insmod: ERROR: could not insert module /lib/modules/5.15.74.2-microsoft-standard-WSL2+/updates/dkms/akvcam.ko: Operation not permitted
I've seen here that this might be related to Secure Boot, but I don't really understand how this would translate to WSL2 and how this problem could be solved here.
Any help is greatly appreciated!
I have this situation:
Ubuntu 16.04;
When I called uname -a result is Linux pi 4.1.19-v7+ #858 SMP Tue Mar 15 15:56:00 GMT 2016 armv7l GNU/Linux.
The problem is when I want to compile new drivers, the system gives me the error:
make[1]: *** /lib/modules/4.1.19-v7+/build: No such file or directory. Stop.
But when I looked at /lib/modules/, I find only version 4.4.38-v7+.
Maybe someone knows what it can be?
Thanks.
You need to have kernel-headers installed for the kernel version that you are trying to compile for.
sudo apt-get install linux-headers-$(uname -r)
You have kernel headers for 4.4.38-v7+, but not for your booted kernel of 4.1.19-v7+ (uname -r)
If you don't want to install 4.1.19-v7+ kernel-headers, reboot the system and boot into 4.4.38-v7+, and then try make, and it would compile the module for that particular kernel.
I'm a newcomer for linux kernel development. This is second question about loading self-compiled kernel(current stable version 4.8.6). The error messages printed during booting are as below:
linux-05e3 mount[282]: mount: unknown filesystem type 'btrfs'
linux-05e3 systemd1: Dependency failed for Initrd Boot File System
linux-05e3 systemd1: Dependency failed for Reload Configuration
Actually the file system type of my root partition is 'btrfs', and it is no problem with kernel version 4.1.12.1-default.
My partition table is :
Result of uname -a is :
Linux linux-05e3 4.1.12-1-default #1 SMP PREEMPT Thu Oct 29 06:43:42
UTC 2015 (e24bad1) x86_64 x86_64 x86_64 GNU/Linux
The .config file is just copied from the one used for 4.1.12.1-default. And I've just ran make menuconfig with nothing modified after copying that file.
Can anyone give some useful tips to me. I really need a linux kernel development expert to give more instructions to me as a beginner. Thanks a million.
I am interfacing Bumblebee2 camera with Nvidia Tegra TK1 board. I have installed firewire1394 driver along with coriander 2.0.2 to get the camera output and it is working fine. But I am not able to load the video for Linux module. I have installed the following two packages as well using synaptic
v4l2loopback-utils
qv4l2
I have following version of Linux kernel on Nvida Tegra TK1 board.
uname -a
Linux tegra-ubuntu 3.10.40-grinch-21.3.4 #1 SMP PREEMPT Fri May 1 10:41:09 UTC 2015 armv7l armv7l armv7l GNU/Linux
I downloaded the stable version of Video4Linux Loopback Device from here
I follow the steps mentioned in the readme file and when I tried to make it, I got the following errors.
make -C /lib/modules/3.10.40-grinch-21.3.4/build SUBDIRS=/home/ubuntu/vloopback modules
make: *** /lib/modules/3.10.40-grinch-21.3.4/build: No such file or directory. Stop.
make: *** [all] Error 2
I would appreciate if someone can help me to install video for Linux loopback device.
Current running kernel Linux tegra-ubuntu 3.10.40-grinch-21.3.4 does not have v4l2loopback support. I used module assistant to compile v4l2loopback module.
sudo aptitude install v4l2loopback-source module-assistant
sudo module-assistant auto-install v4l2loopback-source
Don't forget to mention the current running kernel headers. Then build and make v4l2loopback from here
I have a BBB with Linux pre-installed from the vendor. Here is output from uname -a:
Linux beaglebone 3.8.13 #1 SMP Wed Sep 4 09:09:32 CEST 2013 armv7l GNU/Linux
I am trying to make a Kernel Module, for example HelloWorld.ko for it.
I cloned code from git://github.com/RobertCNelson/linux-dev.git and checkout origin/am33x-v3.8. After I built a module on it and tried to insmod it on my BBB, I got error message:
Error: could not insert module Hello.ko: Invalid module format,
I double checked version of the kernel, it is 3.8.13-bone53. Is this the root cause? Where can I get the "exactly" matched kernel source tree for it? There is no version named 3.8.13 in my cloned git commit tree.
Thanks for your help!