I have a problem when I use the paste command (remapped to C-V) at the end of the line.
Of course it inserts a char before the last one, and not after...
However if I want to insert one after that I have to insert a space, paste the text and delete the space.
Is there a way to make Vim go to the end of the line, plus one char so I can paste quickly?
There are two paste commands in vi; P to paste before the cursor position and p to paste after the cursor position. Make sure you are remapping p.
The default behaviour of put is to do as you require, rather than what Ctrl+V does. Maybe you could remap C-V to "*p.
Related
This question already has answers here:
How to yank the text on a line and paste it inline in Vim?
(4 answers)
Closed 8 years ago.
I couldn't find this answer anywhere. I cut some line in Vim with either dd or V+d and I want to paste it inside brackets let's say. How do I do that?
p is paste after, and P is paste before, but I want it to paste at my cursor position.
Edit: I want to cut from certain cursor position (not whole line) to end of line and paste to cursor position in another line.
When you use either of those methods for cutting, you get the newline at the end of the line. With the newline, vim has to either put the line before or after.
To get the behavior you want, you should delete using 0D instead to delete, and then use a normal p to put it into the cursor.
If you want to cut from current cursor position to the end of line and then paste it inside another line at cursor position, then navigate do the first line, do D to cut to end of line, then move your cursor to the place where you want to paste it and use p.
try this, do Y or dd as usually, and create this mapping:
nnoremap <leader>p :let #"=substitute(#","\n","","g")<cr>p
nnoremap <leader>P :let #"=substitute(#","\n","","g")<cr>P
when you press p/P it pastes in default way(with newline). when you press <leader>p /<leader>P it pastes "in-line".
This is not so clean, because it changed the #", next time you press p the newline is not there any longer. I was a bit lazy, put the sub() there, you can make a little function, remove the newline then paste, without touching (or restore after paste) the #". and in mapping call that function.
I don't know if you did a 10dd, what output do you want to have when you do an "in-line" paste. but you can do quite a lot thing in your function, to reach your needs.
EDIT,
I don't know how did you create the mapping, and "didn't work". here I put an animation:
You can do something like this:
v$d
(move to where you want to put what you just cut)
p or P
In vi/vim editor, I need to copy a block. There are many ways, but one way is very quick.
label the first line by some way,
then label the end line by some way,
then put some command to copy the labeled lines.
then copy, may using 'p', but not sure.
Anybody know the commands (not yy or 10yy)?
just use V to select lines or v to select chars or Ctrlv to select a block.
When the selection spans the area you'd like to copy just hit y and use p to paste it anywhere you like...
Their Documentation says:
Cut and paste:
Position the cursor where you want to begin cutting.
Press v to select characters (or uppercase V to select whole lines).
Move the cursor to the end of what you want to cut.
Press d to cut (or y to copy).
Move to where you would like to paste.
Press P to paste before the cursor, or p to paste after.
Copy and paste is performed with the same steps except for step 4 where you would press y instead of d:
d = delete = cut
y = yank = copy
Another option which may be easier to remember would be to place marks on the two lines with ma and mb, then run :'a,'byank.
Many different ways to accomplish this task, just offering another.
I found the below command much more convenient. If you want to copy lines from 6 to 12 and paste from the current cursor position.
:6,12 co .
If you want to copy lines from 6 to 12 and paste from 100th line.
:6,12t100
Source: https://www.reddit.com/r/vim/comments/8i6vbd/efficient_ways_of_copying_few_lines/
It sounds like you want to place marks in the file.
mx places a mark named x under the cursor
y'x yanks everything between the cursor's current position and the line containing mark x.
You can use 'x to simply move the cursor to the line with your mark.
You can use `x (a back-tick) to move to the exact location of the mark.
One thing I do all the time is yank everything between the cursor and mark x into the clipboard.
You can do that like this:
"+y'x
NOTE: In some environments the clipboard buffer is represented by a * in stead of a +.
Similar questions with some good answers:
How to copy/paste text from vi to different applications
How to paste from buffer in ex mode of vim?
Keyboard shortcuts to that are:
For copy: Place cursor on starting of block and press md and then goto end of block and press y'd. This will select the block to paste it press p
For cut: Place cursor on starting of block and press ma and then goto end of block and press d'a. This will select the block to paste it press p
You can do it as you do in vi, for example to yank lines from 3020 to the end, execute this command (write the block to a file):
:3020,$ w /tmp/yank
And to write this block in another line/file, go to the desired position and execute next command (insert file written before):
:r /tmp/yank
(Reminder: don't forget to remove file: /tmp/yank)
Vim noob here. I am trying to select multiple lines of code to copy and paste in other areas. Is there a way to do this without using the mouse?
A few other ways that don't use visual mode at all:
using marks
leave a mark somewhere with ma
move somewhere else
yank from here to there with y'a
using search motions
localize some unique token at the end of the part you want to yank
yank from here to there with y/foo<cr> (forward search) or y?bar<cr> (backward search)
using text-objects
determine what text-object would map to what you want to yank:
inner/outer word, iw/aw
inner/outer pair, i'"([{</a'"([{<
inner/outer html tag, it/at
sentence, s
paragraph, p
"block", ]
…
yank that text-object with, say, yip
using other motions
yank to end of function: y]}
yank to end of file: yG
all of the above solutions with visual mode
V'ay
V/foo<cr>y
V?bar<cr>y
Vipy, etc.
V]}y
VGy
:h motion.txt will hopefully blow your mind, like it did to mine.
You can place your cursor in the first line you want to copy and then type nyy where n is the number of lines you want to copy. For example, type 2yy to copy the two lines under the cursor.
Then, you can paste them using p.
You can also select multiple lines by placing your cursor somewhere and keeping Shift pressed. Move your cursor to the end of the desired selection and stop pressing Shift. Then copy using just y (and not yy) and paste with p.
Yep, in normal mode type V[direction] and you will highlight multiple lines. If you don't want whole lines, use v instead of V. To copy it, hit y and move to the area which you want to paste in and hit p. To delete it, instead of y use x.
Alternatively, you can simply use [number of lines]yy to yank some number of lines or [number of lines]dd to cut some number of lines. In this case pasting is the same.
When I cut and paste in VIM by pressing v, and go to the end of the line using $, and press d, the next line gets moved up to the same line I'm cutting.
How do I stop this?
It moves up because you have removed all the characters including line return/feed.
There are multiple solutions as usual with Vim. There is no "one true way" but you can try the following commands.
You can use D (capital) in normal mode which will erase everything until the end of line.
See :help D
Using another motion
What you could do instead of using $ to move to the end of the line, use g_. It will move to the last non blank character of the line and won't select line return.
See :help g_
So vg_d should work as you want.
Using Replace
Alternatively, what you could do instead of cutting, you could replace the erased character by a blank using the space character.
So v$rSPACE should work to erase but it will not save the replaced characters in register (for pasting later for example).
To cut everything from current cursor position until the end, use C.
:he C will help you:
Delete from the cursor position to the end of the
line and [count]-1 more lines [into register x], and
start insert. Synonym for c$ (not |linewise|).
Doing so will cause the current line (assuming you are on the start of the line when hitting C) to become empty and the content is (by default) yanked into register "
Edit:
As Xavier notes in his comment (and his answer), the same could be achieved with D. It also cuts everything from current cursor position until the end of the line but doesn't go in insert mode after doing it.
If you use these keystroke sequence then next line would not move up.
v $ h d
It is moving up because EOL character $ is also getting deleted without moving cursor 1 character back.
Just skip the visual mode and swap the other two commands, ie. press d $.
This is shorter than your starting one and doesn't break your tradition introducing other keystrokes you may not be familiar with.
I want to give up using mouse for selecting and pasting chunks of text within a buffer. Whats the most efficient way to do this with just kb? I mean navigate to arbitrary line, copy the substring, return to the previous position and paste.
Very simple method:
Select the lines with Shift-V
"Yank" (=copy) the text with y
Paste the text with p at the position you want to.
There are of course many other ways to copy and paste, yy copies the current line for example.
Do the some VIM tutorials, it is better than learning everything bit by bit.
If you want to go quickly to a line use the search by typing
/SUBSTRING and then Enter after you have found the correct substring.
Make sure to use hlsearch and incsearch
:set incsearch and :set hlsearch
When you are at the correct line, yank the whole line with yy or the whole word with yaw.
Then go back to where you started the search by typing two backticks ``
Then you can paste your yanked line/string with p
Mark your current position by typing ma (you can use any other letter instead of a, this is just a "named position register".
navigate to the line and substring for example by using a / search
yank text with y<movement> or mark it with shift/ctrl-v and then y
move back to your previously marked position with ```a`` (backtick)
paste your buffer with p or P
My normal method would be:
Use visual mode to select the text with v, V, or Ctrl+v
Yank using y
Go to the line you want to be on using 123G or :123
Navigate where I want to be within that line with t or f
Put the text with p or P
If you need to jump back and forth between the spots, I'd cycle through jumps using g, and g;.
Use "p" to paste after the current line, and "P" to paste above the current line.
Not sure what you mean by 'the substring'. If you want to copy line 50 to the current position, use:
:50t.
If you want to move line 50 to the current cursor position, use:
:50m.