Related
I have a (Posix) server that acts as a proxy for many clients to another upstream server. Messages typically flow down from the upstream server, are then matched against, and pushed out to some subset of the clients interested in that traffic (maintaining the FIFO order from the upstream server). Currently, this proxy server is single threaded using an event loop (e.g. - select, epoll, etc.), but now I'd like to make it multithreaded so that the proxy can more fully utilize an entire machine and achieve much higher throughput.
My high level design is to have a pool of N worker pthreads (where N is some small multiple of the number of cores on the machine) who each run their own event loop. Each client connection will be assigned to a specific worker thread who would then be responsible for servicing all of that client's I/O + timeout needs for the duration of that client connection. I also intend to have a single dedicated thread who pulls in the messages in from the upstream server. Once a message is read in, its contents can be considered constant / unchanging, until it is no longer needed and reclaimed. The workers never alter the message contents -- they just pass them along to their clients as needed.
My first question is: should the matching of client interests preferably be done by the producer thread or the worker threads?
In the former approach, for each worker thread, the producer could check the interests (e.g. - group membership) of the worker's clients. If the message matched any clients, then it could push the message onto a dedicated queue for that worker. This approach requires some kind of synchronization between the producer and each worker about their client's rarely changing interests.
In the latter approach, the producer just pushes every message onto some kind of queue shared by all of the worker threads. Then each worker thread checks ALL of the messages for a match against their clients' interests and processes each message that matches. This is a twist on the usual SPMC problem where a consumer is usually assumed to unilaterally take an element for themselves, rather than all consumers needing to do some processing on every element. This approach distributes the matching work across multiple threads, which seems desirable, but I worry it may cause more contention between the threads depending on how we implement their synchronization.
In both approaches, when a message is no longer needed by any worker thread, it then needs to be reclaimed. So, some tracking needs to be done to know when no worker thread needs a message any longer.
My second question is: what is a good way of tracking whether a message is still needed by any of the worker threads?
A simple way to do this would be to assign to each message a count of how many worker threads still need to process the message when it is first produced. Then, when each worker is done processing a message it would decrement the count in a thread-safe manner and if/when the count went to zero we would know it could be reclaimed.
Another way to do this would be to assign 64b sequence numbers to the messages as they came in, then each thread could track and record the highest sequence number up through which they have processed somehow. Then we could reclaim all messages with sequence numbers less than or equal to the minimum processed sequence number across all of the worker threads in some manner.
The latter approach seems like it could more easily allow for a lazy reclamation process with less cross-thread synchronization necessary. That is, you could have a "clean-up" thread that only runs periodically who goes and computes the minimum across the worker threads, with much less inter-thread synchronization being necessary. For example, if we assume that reads and writes of a 64b integer are atomic and a worker's fully processed sequence number is always monotonically increasing, then the "clean-up" thread can just periodically read the workers' fully processed counts (maybe with some memory barrier) and compute the minimum.
Third question: what is the best way for workers to realize that they have new work to do in their queue(s)?
Each worker thread is going to be managing its own event loop of client file descriptors and timeouts. Is it best for each worker thread to just have their own pipe to which signal data can be written by the producer to poke them into action? Or should they just periodically check their queue(s) for new work? Are there better ways to do this?
Last question: what kind of data structure and synchronization should I use for the queue(s) between the producer and the consumer?
I'm aware of lock-free data structures but I don't have a good feel for whether they'd be preferable in my situation or if I should instead just go with a simple mutex for operations that affect the queue. Also, in the shared queue approach, I'm not entirely sure how a worker thread should track "where" it is in processing the queue.
Any insights would be greatly appreciated! Thanks!
Based on your problem description, matching of client interests needs to be done for each client for each message anyway, so the work in matching is the same whichever type of thread it occurs in. That suggests the matching should be done in the client threads to improve concurrency. Synchronization overhead should not be a major issue if the "producer" thread ensures the messages are flushed to main memory (technically, "synchronize memory with respect to other threads") before their availability is made known to the other threads, as the client threads can all read the information from main memory simultaneously without synchronizing with each other. The client threads will not be able to modify messages, but they should not need to.
Message reclamation is probably better done by tracking the current message number of each thread rather than by having a message specific counter, as a message specific counter presents a concurrency bottleneck.
I don't think you need formal queueing mechanisms. The "producer" thread can simply keep a volatile variable updated which contains the number of the most recent message that has been flushed to main memory, and the client threads can check the variable when they are free to do work, sleeping if no work is available. You could get more sophisticated on the thread management, but the additional efficiency improvement would likely be minor.
I don't think you need sophisticated data structures for this. You need volatile variables for the number of the latest message that is available for processing and for the number of the most recent message that have been processed by each client thread. You need to flush the messages themselves to main memory. You need some way of finding the messages in main memory from the message number, perhaps using a circular buffer of pointers, or of messages if the messages are all of the same length. You don't really need much else with respect to the data to be communicated between the threads.
We have a quite large multitasking communication system implemented on Vxworks 5.5 and PPC8260. The system should handle a lot of Ethernet traffic and also handle some cyclic peripheral control activities via RS-232, memory mapped I/O etc. What happens is that in some moment few message queues we are using for inter task communication become overflowed (I see it by log inspection). When I check the status of tasks responsible for serving this Message queues (that is doing receive on them) they appear to be READY.When I inspect msgQShow for the queues themselves they are full but no tasks appear to be blocked on them. But looking at task stack trace shows that a task actually pending inside msgQReceive call.Specifically in the qJobGet kernel call or something alike.
It is unlikely in the extreme that a message queue "lost" a task that was blocked on it.
From your description we can assume:
A message Queue has overflowed. Presumably you have detected this by checking the return value from msgQSend, which has been invoked either with a timeout value, or NO_WAIT.
msgQShow confirms the Q is full
Tasks that should be reading the queue are in the READY state.
The READY state is the state that tasks are in when they are available to run. Tasks are held in a queue (strictly, one queue per priority level), and when the reach the head of the queue they will be scheduled.
If tasks are persistently showing as READY, that suggests that they are not getting CPU time. The fact that the msgQ does not appear to empty supports that.
You should use tools such as system viewer to diagnose. You may need to raise the priority of the reader tasks. If your msgQSend is using NO_WAIT, you may need to use a timeout value
Let's say we're building a threaded server intended to run on a system with four cores. The two thread management schemes I can think of are one thread per client connection and a queuing system.
As the first system's name implies, we'll spawn one thread per client that connects to our server. Assuming one thread is always dedicated to our program's main thread of execution, we'll be able to handle up to three clients concurrently and for any more simultaneous clients than that we'll have to rely on the operating system's preemptive multitasking functionality to switch among them (or the VM's in the case of green threads).
For our second approach, we'll make two thread-safe queues. One is for incoming messages and one is for outgoing messages. In other words, requests and replies. That means we'll probably have one thread accepting incoming connections and placing their requests into the incoming queue. One or two threads will handle the processing of the incoming requests, resolving the appropriate replies, and placing those replies on the outgoing queue. Finally, we'll have one thread just taking replies off of that queue and sending them back out to the clients.
What are the pros and cons of these approaches? Notice that I didn't mention what kind of server this is. I'm assuming that which one has a better performance profile depends on whether the server handles short connections like a web servers and POP3 servers, or longer connections like a WebSocket servers, game servers, and messaging app servers.
Are there other thread management strategies besides these two?
I believe I've done both organizations at one time or another.
Method 1
Just so we're on the same page, the first has the main thread do a listen. Then, in a loop, it does accept. It then passes off the return value to a pthread_create and the client thread's loop does recv/send in loop processing all commands the remote client wants. When done, it cleans up and terminates.
For an example of this, see my recent answer: multi-threaded file transfer with socket
This has the virtues that the main thread and client threads are straightforward and independent. No thread waits on anything another thread is doing. No thread is waiting on anything that it doesn't have to. Thus, the client threads [plural] can all run at maximum line speed. Also, if a client thread is blocked on a recv or send, and another thread can go, it will. It is self balancing.
All thread loops are simple: wait for input, process, send output, repeat. Even the main thread is simple: sock = accept, pthread_create(sock), repeat
Another thing. The interaction between the client thread and its remote client can be anything they agree on. Any protocol or any type of data transfer.
Method 2
This is somewhat akin to an N worker model, where N is fixed.
Because the accept is [usually] blocking, we'll need a main thread that is similar to method 1. Except, that instead of firing up a new thread, it needs to malloc a control struct [or some other mgmt scheme] and put the socket in that. It then puts this on a list of client connections and then loops back to the accept
In addition to the N worker threads, you are correct. At least two control threads, one to do select/poll, recv, enqueue request and one to do wait for result, select/poll, send.
Two threads are needed to prevent one of these threads having to wait on two different things: the various sockets [as a group] and the request/result queues from the various worker threads. With a single control thread all actions would have to be non-blocking and the thread would spin like crazy.
Here is an [extremely] simplified version of what the threads look like:
// control thread for recv:
while (1) {
// (1) do blocking poll on all client connection sockets for read
poll(...)
// (2) for all pending sockets do a recv for a request block and enqueue
// it on the request queue
for (all in read_mask) {
request_buf = dequeue(control_free_list)
recv(request_buf);
enqueue(request_list,request_buf);
}
}
// control thread for recv:
while (1) {
// (1) do blocking wait on result queue
// (2) peek at all result queue elements and create aggregate write mask
// for poll from the socket numbers
// (3) do blocking poll on all client connection sockets for write
poll(...)
// (4) for all pending sockets that can be written to
for (all in write_mask) {
// find and dequeue first result buffer from result queue that
// matches the given client
result_buf = dequeue(result_list,client_id);
send(request_buf);
enqueue(control_free_list,request_buf);
}
}
// worker thread:
while (1) {
// (1) do blocking wait on request queue
request_buf = dequeue(request_list);
// (2) process request ...
// (3) do blocking poll on all client connection sockets for write
enqueue(result_list,request_buf);
}
Now, a few things to notice. Only one request queue was used for all worker threads. The recv control thread did not try to pick an idle [or under utilized] worker thread and enqueue to a thread specific queue [this is another option to consider].
The single request queue is probably the most efficient. But, maybe, not all worker threads are created equal. Some may end up on CPU cores [or cluster nodes] that have special acceleration H/W, so some requests may have to be sent to specific threads.
And, if that is done, can a thread do "work stealing"? That is, a thread completes all its work and notices that another thread has a request in its queue [that is compatible] but hasn't been started. The thread dequeues the request and starts working on it.
Here's a big drawback to this method. The request/result blocks are of [mostly] fixed size. I've done an implementation where the control could have a field for a "side/extra" payload pointer that could be an arbitrary size.
But, if doing a large transfer file transfer, either upload or download, trying to pass this piecemeal through request blocks is not a good idea.
In the download case, the worker thread could usurp the socket temporarily and send the file data before enqueuing the result to the control thread.
But, for the upload case, if the worker tried to do the upload in a tight loop, it would conflict with recv control thread. The worker would have to [somehow] alert the control thread to not include the socket in its poll mask.
This is beginning to get complex.
And, there is overhead to all this request/result block enqueue/dequeue.
Also, the two control threads are a "hot spot". The entire throughput of the system depends on them.
And, there are interactions between the sockets. In the simple case, the recv thread can start one on one socket, but other clients wishing to send requests are delayed until the recv completes. It is a bottleneck.
This means that all recv syscalls have to be non-blocking [asynchronous]. The control thread has to manage these async requests (i.e. initiate one and wait for an async completion notification, and only then enqueue the request on the request queue).
This is beginning to get complicated.
The main benefit to wanting to do this is having a large number of simultaneous clients (e.g. 50,000) but keep the number of threads to a sane value (e.g. 100).
Another advantage to this method is that it is possible to assign priorities and use multiple priority queues
Comparison and hybrids
Meanwhile, method 1 does everything that method 2 does, but in a simpler, more robust [and, I suspect, higher throughput way].
After a method 1 client thread is created, it might split the work up and create several sub-threads. It could then act like the control threads of method 2. In fact, it might draw on these threads from a fixed N pool just like method 2.
This would compensate for a weakness of method 1, where the thread is going to do heavy computation. With a large number threads all doing computation, the system would get swamped. The queuing approach helps alleviate this. The client thread is still created/active, but it's sleeping on the result queue.
So, we've just muddied up the waters a bit more.
Either method could be the "front facing" method and have elements of the other underneath.
A given client thread [method 1] or worker thread [method 2] could farm out its work by opening [yet] another connection to a "back office" compute cluster. The cluster could be managed with either method.
So, method 1 is simpler and easier to implement and can easily accomodate most job mixes. Method 2 might be better for heavy compute servers to throttle the requests to limited resources. But, care must be taken with method 2 to avoid bottlenecks.
I don't think your "second approach" is well thought out, so I'll just see if I can tell you how I find it most useful to think about these things.
Rule 1) Your throughput is maximized if all your cores are busy doing useful work. Try to keep your cores busy doing useful work.
These are things that can keep you from keeping your cores busy doing useful work:
you are keeping them busy creating threads. If tasks are short-lived, then use a thread pool so you aren't spending all your time starting up and killing threads.
you are keeping them busy switching contexts. Modern OSes are pretty good at multithreading, but if you've gotta switch jobs 10000 times per second, that overhead is going to add up. If that's a problem for you you'll have to consider and event-driven architecture or other sort of more efficient explicit scheduling.
your jobs block or wait for a long time, and you don't have the resources to run enough threads threads to keep your cores busy. This can be a problem when you're serving protocols with persistent connections that hang around doing nothing most of the time, like websocket chat. You don't want to keep a whole thread hanging around doing nothing by tying it to a single client. You'll need to architect around that.
All your jobs need some other resource besides CPU, and you're bottlenecked on that -- that's a discussion for another day.
All that said... for most request/response kinds of protocols, passing each request or connection off to a thread pool that assigns it a thread for the duration of the request is easy to implement and performant in most cases.
Rule 2) Given maximized throughput (all your cores are usefully busy), getting jobs done on a first-come, first-served basis minimizes latency and maximizes responsiveness.
This is truth, but in most servers it is not considered at all. You can run into trouble here when your server is busy and jobs have to stop, even for short moments, to perform a lot of blocking operations.
The problem is that there is nothing to tell the OS thread scheduler which thread's job came in first. Every time your thread blocks and then becomes ready, it is scheduled on equal terms with all the other threads. If the server is busy, that means that the time it takes to process your request is roughly proportional to the number of times it blocks. That is generally no good.
If you have to block a lot in the process of processing a job, and you want to minimize the overall latency of each request, you'll have to do your own scheduling that keeps track of which jobs started first. In an event-driven architecture, for example, you can give priority to handling events for jobs that started earlier. In a pipelined architecture, you can give priority to later stages of the pipeline.
Remember these two rules, design your server to keep your cores busy with useful work, and do first things first. Then you can have a fast and responsive server.
I have the following query which i need someone to please help me with.Im new to message queues and have recently started looking at the Kestrel message queue.
As i understand,both threads and message queues are used for concurrency in applications so what is the advantage of using message queues over multitreading ?
Please help
Thank you.
message queues allow you to communicate outside your program.
This allows you to decouple your producer from your consumer. You can spread the work to be done over several processes and machines, and you can manage/upgrade/move around those programs independently of each other.
A message queue also typically consists of one or more brokers that takes care of distributing your messages and making sure the messages are not lost in case something bad happens (e.g. your program crashes, you upgrade one of your programs etc.)
Message queues might also be used internally in a program, in which case it's often just a facility to exchange/queue data from a producer thread to a consumer thread to do async processing.
Actually, one facilitates the other. Message queue is a nice and simple multithreading pattern: when you have a control thread (usually, but not necessarily an application's main thread) and a pool of (usually looping) worker threads, message queues are the easiest way to facilitate control over the thread pool.
For example, to start processing a relatively heavy task, you submit a corresponding message into the queue. If you have more messages, than you can currently process, your queue grows, and if less, it goes vice versa. When your message queue is empty, your threads sleep (usually by staying locked under a mutex).
So, there is nothing to compare: message queues are part of multithreading and hence they're used in some more complicated cases of multithreading.
Creating threads is expensive, and every thread that is simultaneously "live" will add a certain amount of overhead, even if the thread is blocked waiting for something to happen. If program Foo has 1,000 tasks to be performed and doesn't really care in what order they get done, it might be possible to create 1,000 threads and have each thread perform one task, but such an approach would not be terribly efficient. An second alternative would be to have one thread perform all 1,000 tasks in sequence. If there were other processes in the system that could employ any CPU time that Foo didn't use, this latter approach would be efficient (and quite possibly optimal), but if there isn't enough work to keep all CPUs busy, CPUs would waste some time sitting idle. In most cases, leaving a CPU idle for a second is just as expensive as spending a second of CPU time (the main exception is when one is trying to minimize electrical energy consumption, since an idling CPU may consume far less power than a busy one).
In most cases, the best strategy is a compromise between those two approaches: have some number of threads (say 10) that start performing the first ten tasks. Each time a thread finishes a task, have it start work on another until all tasks have been completed. Using this approach, the overhead related to threading will be cut by 99%, and the only extra cost will be the queue of tasks that haven't yet been started. Since a queue entry is apt to be much cheaper than a thread (likely less than 1% of the cost, and perhaps less than 0.01%), this can represent a really huge savings.
The one major problem with using a job queue rather than threading is that if some jobs cannot complete until jobs later in the list have run, it's possible for the system to become deadlocked since the later tasks won't run until the earlier tasks have completed. If each task had been given a separate thread, that problem would not occur since the threads associated with the later tasks would eventually manage to complete and thus let the earlier ones proceed. Indeed, the more earlier tasks were blocked, the more CPU time would be available to run the later ones.
It makes more sense to contrast message queues and other concurrency primitives, such as semaphores, mutex, condition variables, etc. They can all be used in the presence of threads, though message-passing is also commonly used in non-threaded contexts, such as inter-process communication, whereas the others tend to be confined to inter-thread communication and synchronisation.
The short answer is that message-passing is easier on the brain. In detail...
Message-passing works by sending stuff from one agent to another. There is generally no need to coordinate access to the data. Once an agent receives a message it can usually assume that it has unqualified access to that data.
The "threading" style works by giving all agent open-slather access to shared data but requiring them to carefully coordinate their access via primitives. If one agent misbehaves, the process becomes corrupted and all hell breaks loose. Message passing tends to confine problems to the misbehaving agent and its cohort, and since agents are generally self-contained and often programmed in a sequential or state-machine style, they tend not to misbehave as often — or as mysteriously — as conventional threaded code.
As a side project I'm currently writing a server for an age-old game I used to play. I'm trying to make the server as loosely coupled as possible, but I am wondering what would be a good design decision for multithreading. Currently I have the following sequence of actions:
Startup (creates) ->
Server (listens for clients, creates) ->
Client (listens for commands and sends period data)
I'm assuming an average of 100 clients, as that was the max at any given time for the game. What would be the right decision as for threading of the whole thing? My current setup is as follows:
1 thread on the server which listens for new connections, on new connection create a client object and start listening again.
Client object has one thread, listening for incoming commands and sending periodic data. This is done using a non-blocking socket, so it simply checks if there's data available, deals with that and then sends messages it has queued. Login is done before the send-receive cycle is started.
One thread (for now) for the game itself, as I consider that to be separate from the whole client-server part, architecturally speaking.
This would result in a total of 102 threads. I am even considering giving the client 2 threads, one for sending and one for receiving. If I do that, I can use blocking I/O on the receiver thread, which means that thread will be mostly idle in an average situation.
My main concern is that by using this many threads I'll be hogging resources. I'm not worried about race conditions or deadlocks, as that's something I'll have to deal with anyway.
My design is setup in such a way that I could use a single thread for all client communications, no matter if it's 1 or 100. I've separated the communications logic from the client object itself, so I could implement it without having to rewrite a lot of code.
The main question is: is it wrong to use over 200 threads in an application? Does it have advantages? I'm thinking about running this on a multi-core machine, would it take a lot of advantage of multiple cores like this?
Thanks!
Out of all these threads, most of them will be blocked usually. I don't expect connections to be over 5 per minute. Commands from the client will come in infrequently, I'd say 20 per minute on average.
Going by the answers I get here (the context switching was the performance hit I was thinking about, but I didn't know that until you pointed it out, thanks!) I think I'll go for the approach with one listener, one receiver, one sender, and some miscellaneous stuff ;-)
use an event stream/queue and a thread pool to maintain the balance; this will adapt better to other machines which may have more or less cores
in general, many more active threads than you have cores will waste time context-switching
if your game consists of a lot of short actions, a circular/recycling event queue will give better performance than a fixed number of threads
To answer the question simply, it is entirely wrong to use 200 threads on today's hardware.
Each thread takes up 1 MB of memory, so you're taking up 200MB of page file before you even start doing anything useful.
By all means break your operations up into little pieces that can be safely run on any thread, but put those operations on queues and have a fixed, limited number of worker threads servicing those queues.
Update: Does wasting 200MB matter? On a 32-bit machine, it's 10% of the entire theoretical address space for a process - no further questions. On a 64-bit machine, it sounds like a drop in the ocean of what could be theoretically available, but in practice it's still a very big chunk (or rather, a large number of pretty big chunks) of storage being pointlessly reserved by the application, and which then has to be managed by the OS. It has the effect of surrounding each client's valuable information with lots of worthless padding, which destroys locality, defeating the OS and CPU's attempts to keep frequently accessed stuff in the fastest layers of cache.
In any case, the memory wastage is just one part of the insanity. Unless you have 200 cores (and an OS capable of utilizing) then you don't really have 200 parallel threads. You have (say) 8 cores, each frantically switching between 25 threads. Naively you might think that as a result of this, each thread experiences the equivalent of running on a core that is 25 times slower. But it's actually much worse than that - the OS spends more time taking one thread off a core and putting another one on it ("context switching") than it does actually allowing your code to run.
Just look at how any well-known successful design tackles this kind of problem. The CLR's thread pool (even if you're not using it) serves as a fine example. It starts off assuming just one thread per core will be sufficient. It allows more to be created, but only to ensure that badly designed parallel algorithms will eventually complete. It refuses to create more than 2 threads per second, so it effectively punishes thread-greedy algorithms by slowing them down.
I write in .NET and I'm not sure if the way I code is due to .NET limitations and their API design or if this is a standard way of doing things, but this is how I've done this kind of thing in the past:
A queue object that will be used for processing incoming data. This should be sync locked between the queuing thread and worker thread to avoid race conditions.
A worker thread for processing data in the queue. The thread that queues up the data queue uses semaphore to notify this thread to process items in the queue. This thread will start itself before any of the other threads and contain a continuous loop that can run until it receives a shut down request. The first instruction in the loop is a flag to pause/continue/terminate processing. The flag will be initially set to pause so that the thread sits in an idle state (instead of looping continuously) while there is no processing to be done. The queuing thread will change the flag when there are items in the queue to be processed. This thread will then process a single item in the queue on each iteration of the loop. When the queue is empty it will set the flag back to pause so that on the next iteration of the loop it will wait until the queuing process notifies it that there is more work to be done.
One connection listener thread which listens for incoming connection requests and passes these off to...
A connection processing thread that creates the connection/session. Having a separate thread from your connection listener thread means that you're reducing the potential for missed connection requests due to reduced resources while that thread is processing requests.
An incoming data listener thread that listens for incoming data on the current connection. All data is passed off to a queuing thread to be queued up for processing. Your listener threads should do as little as possible outside of basic listening and passing the data off for processing.
A queuing thread that queues up the data in the right order so everything can be processed correctly, this thread raises the semaphore to the processing queue to let it know there's data to be processed. Having this thread separate from the incoming data listener means that you're less likely to miss incoming data.
Some session object which is passed between methods so that each user's session is self contained throughout the threading model.
This keeps threads down to as simple but as robust a model as I've figured out. I would love to find a simpler model than this, but I've found that if I try and reduce the threading model any further, that I start missing data on the network stream or miss connection requests.
It also assists with TDD (Test Driven Development) such that each thread is processing a single task and is much easier to code tests for. Having hundreds of threads can quickly become a resource allocation nightmare, while having a single thread becomes a maintenance nightmare.
It's far simpler to keep one thread per logical task the same way you would have one method per task in a TDD environment and you can logically separate what each should be doing. It's easier to spot potential problems and far easier to fix them.
What's your platform? If Windows then I'd suggest looking at async operations and thread pools (or I/O Completion Ports directly if you're working at the Win32 API level in C/C++).
The idea is that you have a small number of threads that deal with your I/O and this makes your system capable of scaling to large numbers of concurrent connections because there's no relationship between the number of connections and the number of threads used by the process that is serving them. As expected, .Net insulates you from the details and Win32 doesn't.
The challenge of using async I/O and this style of server is that the processing of client requests becomes a state machine on the server and the data arriving triggers changes of state. Sometimes this takes some getting used to but once you do it's really rather marvellous;)
I've got some free code that demonstrates various server designs in C++ using IOCP here.
If you're using unix or need to be cross platform and you're in C++ then you might want to look at boost ASIO which provides async I/O functionality.
I think the question you should be asking is not if 200 as a general thread number is good or bad, but rather how many of those threads are going to be active.
If only several of them are active at any given moment, while all the others are sleeping or waiting or whatnot, then you're fine. Sleeping threads, in this context, cost you nothing.
However if all of those 200 threads are active, you're going to have your CPU wasting so much time doing thread context switches between all those ~200 threads.