im trying to setup a small 2 system distcc compile cluster for a new project im working on but for some reason i cant get the second server in the cluster to compile.
the arm-eabi-gcc file works if i try to run it on said server i get the normal no input files error but distcc has other ideas.
extract from its log file :
distccd[13005] (dcc_execvp) ERROR: failed to exec arm-eabi-gcc: No such file or directory
distccd[13002] (dcc_job_summary) client: xxx.xxx.xxx.xxx:32890 COMPILE_ERROR exit:110 sig:0 core:0 ret:0 time:1103ms arm-eabi-gcc arch/arm/vfp/vfpdouble.c
distccd[13003] (dcc_pump_readwrite) ERROR: unexpected eof on fd5
distccd[13003] (dcc_job_summary) client: xxx.xxx.xxx.xxx:32891 CLI_DISCONN exit:0 sig:0 core:0 ret:107 time:429ms
distccd[12998] (dcc_pump_readwrite) ERROR: unexpected eof on fd5
distccd[12998] (dcc_job_summary) client: xxx.xxx.xxx.xxx:32888 CLI_DISCONN exit:0 sig:0 core:0 ret:107 time:2499ms
distccd[13001] (dcc_pump_readwrite) ERROR: unexpected eof on fd5
distccd[13001] (dcc_job_summary) client: xxx.xxx.xxx.xxx:32889 CLI_DISCONN exit:0 sig:0 core:0 ret:107 time:2512ms
any ideas what is going on?
edit: i can compile for x86 and x86_64 quite happily using distcc just not arm for some reason
The cross compiler must
(a) be installed (exactly the same binary, not just the same name/location)
(b) in the search path for distcc
Depending on your system setup (distcc as a daemon, or under inetd) the easiest way to achieve things might be to symlink the binaries into /usr/local/bin for the distcc hosts.
Related
Recently I am working on upgrading my opensips version manually from 2.2 to 3.3.
Upgradation is done from my side but in old opensips(2.2) I was able to show registered user(SIP) using opensipsctl ul show command but in new version 3.3 opensipsctl is deprecated(I guess not sure).
So I am trying to get details using opensips-cli but I didn't find out correct command for show register and show dump list, I try to follow below link but did not find correct command.
https://www.opensips.org/Documentation/Interface-CoreMI-3-0
Also, my opensips-cli -x command not working giving the below error. (mi_fifo module loaded correctly)
# opensips-cli -o output_type=yaml -x mi uptime
ERROR: cannot access fifo file /tmp/opensips_fifo: [Errno 13] Permission denied: '/tmp/opensips_fifo'
ERROR: starting with Linux kernel 4.19, processes can no longer read from FIFO files
ERROR: that are saved in directories with sticky bits (such as /tmp)
ERROR: and are not owned by the same user the process runs with.
ERROR: To fix this, either store the file in a non-sticky bit directory (such as /var/run/opensips),
ERROR: or disable fifo file protection using 'sysctl fs.protected_fifos=0' (NOT RECOMMENDED)
/tmp/opensips_fifo file also created correctly.
# ls -l /tmp/opensips_fifo
prw-rw-rw- 1 opensips opensips 0 Dec 29 06:52 /tmp/opensips_fifo
Using opensips-cli command I am able to create database and add table but not able to perform -x command.
Can anyone help me to find out a command for show register and show dump list also any suggestion related -x command not working on opensips-cli.
I had a similar error and i found the following:
if you state in the opensips-cli.cfg file that the fifo_file is located at /tmp/opensips_fifo, it will produce this error, try changing this setting to /var/run/opensips/opensips_fifo
I installed Oracle Analytics Server 5.5.0.
I configured it and run services. AdminServer and bi_server1 it's working ok.
But when I want run other process I have problem...I try run obips1 like:
./start.sh -i obips1
In obips1out I fin error like:
/u01/app/oracle/product/fmwbi_oas/bi/bifoundation/web/bin/sawserver: error while loading shared libraries: libsawhttpserver643r.so: cannot open shared object file: No such file or directory
File 'libsawhttpserver643r.so' exist in location: /u01/app/oracle/product/fmwbi_oas/bi/bifoundation/web/bin
And sawserver should see this file
Can anyone know why I get this error?
I installed OBIEE12 and I do not have this error, but in OAS 5.5.0 I get this error for first time.
I solved problem - this is a permission problem to directory with libraries.
But at now, when I start proces I get different error:
[2020-07-13T10:41:02.838+02:00] [OBIS] [NOTIFICATION:1] [] [] [ecid: ] [sik: ] [tid: 8c3e8720] [nQSError: 46136] Could not load CSF library libnqcsfwrapper64.so
What's wrong?
In order to use the hcsr-04 ultrasonic sensor using BBB's PRU, I have tried this git :
https://github.com/HudsonWerks/Range-Sensor-PRU
I get the error "the PRU failed to open", when I try to start "rangepru".
Doing some research, I feel like that is because my PRU is not initialized and that I should do : "echo BB-BONE-PRU-01 > /sys/devices/bone_capemgr.8/slots" to correct it.
But with the recent debian versions (4.x), the cape manager changed and I found the file "slots" at:
/sys/devices/platform/bone_capemgr/slots ; BUT, there is no way to open, modify it :
- using "nano" I get "slots.swp Permission denied"
- and by typing the correct echo command (modified from the one above) : I get : "write error: No such file or directory"
Best regards,
Elrise
You are probably missing a suitable device tree driver.
Try to follow the instructions on:
https://github.com/luigif/hcsr04
related to the compilation and installation of the driver.
If you have a proper development environment, executing make install should do everything for you.
I've been at it for days but could not solve my problem.
I am running:
mpiexec -hostfile ~/machines -nolocal -pernode mkdir -p $dstpath where $dstpath points to current directory and "machines" is a file containing:
node01
node02
node03
node04
This is the error output:
Failed to parse XML input with the minimalistic parser. If it was not
generated by hwloc, try enabling full XML support with libxml2.
[node01:06177] [[6421,0],0] ORTE_ERROR_LOG: Error in file base/plm_base_launch_support.c at line 891
--------------------------------------------------------------------------
ORTE was unable to reliably start one or more daemons.
This usually is caused by:
* not finding the required libraries and/or binaries on
one or more nodes. Please check your PATH and LD_LIBRARY_PATH
settings, or configure OMPI with --enable-orterun-prefix-by-default
* lack of authority to execute on one or more specified nodes.
Please verify your allocation and authorities.
* the inability to write startup files into /tmp (--tmpdir/orte_tmpdir_base).
Please check with your sys admin to determine the correct location to use.
* compilation of the orted with dynamic libraries when static are required
(e.g., on Cray). Please check your configure cmd line and consider using
one of the contrib/platform definitions for your system type.
* an inability to create a connection back to mpirun due to a
lack of common network interfaces and/or no route found between
them. Please check network connectivity (including firewalls
and network routing requirements).
--------------------------------------------------------------------------
[node01:06177] 1 more process has sent help message help-errmgr-base.txt / failed-daemon-launch
[node01:06177] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
Failed to parse XML input with the minimalistic parser. If it was not
generated by hwloc, try enabling full XML support with libxml2.
[node01:06181] [[6417,0],0] ORTE_ERROR_LOG: Error in file base/plm_base_launch_support.c at line 891
I have 4 machines, node01 to node04. In order to log into these 4 nodes, I have to first log in to node00. I am trying to run some distributed graph functions. The graph software is installed in node01 and is supposed to be synchronised to the other nodes using mpiexec.
What I've done:
Made sure all passwordless login are setup, every machine can ssh to any other machine with no issues.
Have a hostfile in the home directory.
echo $PATH gives /home/myhome/bin:/home/myhome/.local/bin:/usr/include/openmpi:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
echo $LD_LIBRARY_PATH gives
/usr/lib/openmpi/lib
This has previously worked before, but it just suddenly started giving these errors. I got my administrator to install fresh machines but it still gave such errors. I've tried doing it one node at a time but it gave the same errors. I'm not entirely familiar with command line at all so please give me some suggestions. I've tried reinstalling OpenMPI from source and from sudo apt-get install openmpi-bin. I'm on Ubuntu 16.04 LTS.
You should focus on fixing:
Failed to parse XML input with the minimalistic parser. If it was not
generated by hwloc, try enabling full XML support with libxml2.
[node01:06177] [[6421,0],0] ORTE_ERROR_LOG: Error in file base/plm_base_launch_support.c at line 891
When configuring JRebel on my remote server (JBoss on linux) I have configured the JVM arg as
-javaagent:/home/user/jrebel.jar" -Drebel.remoting_plugin=true
The jrebel.jar is absolutely definitely in that location, yet the server fails to start with the error:
Error opening zip
file or JAR manifest missing : /home/user/jrebel.jar Error occurred
during initialization of VM agent library failed to init: instrument
So the arg is oviously being passed to the JVM correctly, but for the life of me I can't work out why it can't find the jar. I've been through every Zero Turnaround article I can find + looked at the solutions that have resolved it for other people, but no luck. Any ideas?
Turned out to be a permissions problem - the JBoss user didn't have the permissions to access the directory that I had placed jrebel.jar into.
Would have been nice to have a more meaningfull error - e.g. 'permissions denied'. Shows my lack of Linux knowledge though I guess.
After the jar was moved to a directory within the JBoss installation + the jar owner was changed to the JBoss user and Read/Write/Execute permissions added, all is well.
Yes , the permission is the reason that this error happens to me when I tried to open PHPSTORM and that error was :
Error opening zip file or JAR manifest missing : ${JetbrainsIdesCrackPath}
Error occurred during initialization of VM
agent library failed to init: instrument
so before running PHPSTORM I had to run the command : sudo -i to get the root permission to run the program.