I have set up an OpenVPN port for WindowsCE on my device (CHD Five) with WindowsCE 5.0, but on .exe startup it pops out:
Cannot find 'ovpncmgr' (or one of its components). Make sure the path and filename are correct and that all the required libraries are avilable.
Same error for main app exe file, but no more error messages, that would allow to understand, where is problem.
The question is, how to debug/find/explore on WinCE what is it, what it is missing, which library/component is missing, like possible in WinXP and other WinOS.
Use Depends.exe to look at the dependencies of the application. It ships with Visual Studio and is also available for download here.
Related
I am trying to make a C++ application with wxWidgets for raspberry on Visual studio.
I created a blink project from the templates and I only added the library wx.h in order to test the code and when I try to compile it fails because it doesn't find the library.
By the way, the blink project itself works fine. It only fails when I add the wx.h library.
#include <wx-3.1\wx\wx.h>
It's odd, because whe I open the file it has the right path.
Even intellisense detects the path correctly.
But I can't figure out what is causing the error.
I configured a remote connection to the raspberry:
And these are the errors displayed:
There is not enough information to answer your question, e.g. you don't explain how do you build your project at all (e.g. do you use CMake?), but a couple of observations that may be helpful:
wxWidgets headers are included as <wx/wx.h>, you definitely should not have the wx-3.1 component and you must use slashes and not backslashes.
You have to provide the compiler with the appropriate options, which usually happens by running wx-config --cxxflags under Unix systems (which may be hidden from you if you use CMake FindwxWidgets module which uses wx-config internally).
I have developed an application for Windows CE (Bar Code Scanner Zebra MK500), I make a .cab installer and the installation was correct, but when I try to launch the app, I get this error.:
cannot find 'project' (or one of its components). Make sure the path and filename are correct and that all the required libraries are available.
NOTE: All the dll's are on the installer.
Could be any number of things, but the short of it is that the loader is unable to resolve a DLL that matches both the name and processor you're using.
Check to ensure that all of your directly referenced DLLs exist and they are built for the same processor (since you're using a Zebra scanner, all DLLs must be built for ARM).
Check to ensure indirectly referenced (so DLLs referenced by DLLs you reference) DLLs also exist (like frameworks).
Verify things like runtimes, SQL Server CE native bits - those are the common ones.
I have been a long-time visual studio developer, and I am trying to switch over to using mono so I can port my applications to Ubuntu. I have been trying to get some of my VS2010 C++ projects (.vcxproj file types) to load into MD on my Ubunutu 12.04 machine. According to the documentation I have read online this should work, however, every time I try and load a project I get the error shown below. Is there something else I need to be installing in order to be able to load C++ projects in monodevelop? I have done some searching, but have not yet found anything related to this particular question.
VC2010Test.sln(4): Unsupported or unrecognized project : '/home/me/Projects/Test/VC2010Test/VC2010Test.vcxproj'.
Thanks
MonoDevelop has a C/C++ binding, called CBinding.
But:
Beware, it's not meant to target managed C++.
AFAIK, it only works in Unix-like platforms.
So, if you still target non-managed C++ and are not using MonoDevelop for Windows, two questions:
Did you make sure that the binding (addin) is installed and enabled?
If the answer to the above question is yes, you may want to try this: the binding creates projects with the extension ".proj" by default, I think, so maybe you can change this to ".vcxproj", recompile, and test again. If it works, then it should be easy to create a pull request to include this extension of possible file types that this addin can handle?
We have an installer application.
In that we have one dll related to our application.
We created setup with all respective files.
We used "Install Shield 6.3" and created a setup file.
After created build. The build is working in xp, not working in 2000.
It is showing error message as Couldn't load .dll only in win2000.
What could be the issue any idea?
Regards
Hara
It looks like one of the system/third party dll you are loading is either not available or of wrong version. Use a tool like dependency walker to check whether all the required dlls are available or not.
You have probbely missing prequsits that exits on XP but not on Win2000.
You need to run the Dependency Walker tool on Win2000 and load the problematic DLL, the tool will tell what is missing.
Try running installation with Filemon in the background, filtering with the missing DLL's name. Then, see where the DLL is searched for, and fix the problem. Hard to say without any further information, but first difference I have in mind is that the system folder in XP is C:\windows\system32, while in win2000 it is C:\winnt\system32. If you've hardcoded the system path for any reason, it might be the problem.
I have installed the Netbeans 6.7 IDE with Java ME included, but cannot create a Mobile Application project from the Java ME category. When I select the project type the wizard stops at "Finding Feature" with the message:
Not all requested modules can be enabled:
[StandardModule:org.netbeans.modules.mobility.end2end.kig jarFile:C:\Program Files\NetBeans 6.7\mobility8\modules\org-netbeans-modules-mobility-end2end-kit.jar.
I am attempting to run this on Vista Home Premium. I have tried to run the IDE as Administrator with no luck.
I am at a loss for where to go next as I cannot seem to find any information regarding this issue. Even if you don't have the solution any insight into this error message would be helpful.
I am unable so far to get the project running via the Netbeans IDE install. I have, for the time being, installed the Java ME SDK which includes a very stripped down version of the Netbeans IDE for mobile development.
I originally had some issues starting the SDK as well on Vista. The IDE reported that it could not connect to the device manager on localhost. After some searching I found this link: Java ME SDK Startup Problem which suggests changing the hosts file localhost entry from IPv6 to IPv4. The fix worked perfectly and I can now compile and run code in the emulator.
This is not an optimal solution as the SDK does not include the visual design tools, however I am able to get a basic project going in the mean time.
I have given up on the 6.7 version and have instead located and installed 6.5.1. This previous version has been working just fine and seems to do everything I need.
I ran into the exact same error today while installing NB 6.8 beta. To resolve it we need to install two plugins:
Java Web Applications (as mentioned by Ali above) and
Sun Java System Web Server 7.0
Note that these two are part of the Category called "Java Web and EE" hence the confusion that we need to install Glassfish App Server. But we need these two plugins because they are required for debugging using breakpoints in emulator. Netbeans runs a web server when we do breakpoint based debugging.
Also note that the Java Web applications needs SOAP Web Services and JavaScript Debugger plugins to run and so these plugins are also installed when you try to install it.
You also need to install "Java Web Applications" plugin.
Tools->Plugins->Available Plugins
If the module is present, you should try unzipping it to check its content makes sense.
You should also be able to rebuild it from Netbeans sources.
You can also try to figure out why this happens by debugging the module loader inside Netbeans from its sources, using another IDE, presumably the latest version of Netbeans you can find without the issue.
If the module is missing, you might want to get the missing jar file from an installation of a previous version of Netbeans, see if it is compatible.
6.5.1 isn't missing any module.
back in version 5.5, the mobility module had to be downloaded and installed separately from the main IDE.
If you want to consider using Eclipse for developing your J2ME app...I've written a post related to that some time ago: here.