Related
I have multiple *csv file that cat like:
#sample,time,N
SPH-01-HG00186-1_R1_001,8.33386,93
SPH-01-HG00266-1_R1_001,7.41229,93
SPH-01-HG00274-1_R1_001,7.63903,93
SPH-01-HG00276-1_R1_001,7.94798,93
SPH-01-HG00403-1_R1_001,7.99299,93
SPH-01-HG00404-1_R1_001,8.38001,93
And I try to wrangle cated csv file to:
#sample,time,N
HG00186,8.33386,93
HG00266,7.41229,93
HG00274,7.63903,93
HG00276,7.94798,93
HG00403,7.99299,93
HG00404,8.38001,93
I did:
for i in $(ls *csv); do line=$(cat ${i} | grep -v "#" | cut -d'-' -f3); sed 's/*${line}*/${line}/g'; done
Yet no result showed up... Any advice of doing so? Thanks.
With awk and the logic of splitting each line by , then split their first field by -:
awk -v FS=',' -v OFS=',' 'NR > 1 { split($1,w,"-"); $1 = w[3] } 1' file.csv
With sed and a robust regex that cannot possibly modify the other fields:
sed -E 's/^([^,-]*-){2}([^,-]*)[^,]*/\2/' file.csv
# or
sed -E 's/^(([^,-]*)-){3}[^,]*/\2/' file.csv
Use this Perl one-liner:
perl -i -pe 's{.*?-.*?-(.*?)-.*?,}{$1,}' *.csv
The Perl one-liner uses these command line flags:
-e : Tells Perl to look for code in-line, instead of in a file.
-p : Loop over the input one line at a time, assigning it to $_ by default. Add print $_ after each loop iteration.
-i.bak : Edit input files in-place (overwrite the input file). Before overwriting, save a backup copy of the original file by appending to its name the extension .bak (you can omit .bak, to avoid creating any backup files).
SEE ALSO:
perldoc perlrun: how to execute the Perl interpreter: command line switches
perldoc perlre: Perl regular expressions (regexes)
perldoc perlre: Perl regular expressions (regexes): Quantifiers; Character Classes and other Special Escapes; Assertions; Capture groups
perldoc perlrequick: Perl regular expressions quick start
You can use
sed -E 's/^[^-]+-[0-9]+-([^-]+)[^,]+/\1/' file > newfile
Details:
-E - enabling the POSIX ERE regex flavor
^[^-]+-[0-9]+-([^-]+)[^,]+ - the regex pattern that searches for
^ - start of string
[^-]+ - one or more non-hyphen chars
- - a hyphen
[0-9]+ - one or more digits
- - a hyphen
([^-]+) - Group 1: one or more non-hyphens
[^,]+ - one or more non-comma chars
\1 - replace the match with Group 1 value.
See the online demo:
#!/bin/bash
s='SPH-01-HG00186-1_R1_001,8.33386,93
SPH-01-HG00266-1_R1_001,7.41229,93
SPH-01-HG00274-1_R1_001,7.63903,93
SPH-01-HG00276-1_R1_001,7.94798,93
SPH-01-HG00403-1_R1_001,7.99299,93
SPH-01-HG00404-1_R1_001,8.38001,93'
sed -E 's/^[^-]+-[0-9]+-([^-]+)[^,]+/\1/' <<< "$s"
Output:
HG00186,8.33386,93
HG00266,7.41229,93
HG00274,7.63903,93
HG00276,7.94798,93
HG00403,7.99299,93
HG00404,8.38001,93
You can mangle text using bash parameter expansion, without resorting to external tools like awk and sed:
IFS=","
while read -r -a line; do
x="${line[0]%-*}"
x="${x##*-}"
printf "%s,%s,%s\n" "$x" "${line[1]}" "${line[2]}"
done < input.txt
Or you could do it with simple awk, as others have done.
awk '{print $3,$5,$6}' FS='[-,]' OFS=, < input.txt
If you need to use cut AT ANY PRICE then I suggest following solution, let file.txt content be
#sample,time,N
SPH-01-HG00186-1_R1_001,8.33386,93
SPH-01-HG00266-1_R1_001,7.41229,93
SPH-01-HG00274-1_R1_001,7.63903,93
SPH-01-HG00276-1_R1_001,7.94798,93
SPH-01-HG00403-1_R1_001,7.99299,93
SPH-01-HG00404-1_R1_001,8.38001,93
then
head -1 file.txt && tail -6 file.txt | tr '-' ',' | cut --delimiter=',' --fields=3,5,6
gives output
#sample,time,N
HG00186,8.33386,93
HG00266,7.41229,93
HG00274,7.63903,93
HG00276,7.94798,93
HG00403,7.99299,93
HG00404,8.38001,93
Explanation: output 1st line as-is using head then ram 6 last lines into tr to replace - using , finally use cut with , delimiter and specify desired fields.
{m,n,g}awk NF++ FS='^[^-]+-[^-]+-|-[^,]+' OFS=
|
#sample,time,N
HG00186,8.33386,93
HG00266,7.41229,93
HG00274,7.63903,93
HG00276,7.94798,93
HG00403,7.99299,93
HG00404,8.38001,93
In my bash script I have an external (received from user) string, which I should use in sed pattern.
REPLACE="<funny characters here>"
sed "s/KEYWORD/$REPLACE/g"
How can I escape the $REPLACE string so it would be safely accepted by sed as a literal replacement?
NOTE: The KEYWORD is a dumb substring with no matches etc. It is not supplied by user.
Warning: This does not consider newlines. For a more in-depth answer, see this SO-question instead. (Thanks, Ed Morton & Niklas Peter)
Note that escaping everything is a bad idea. Sed needs many characters to be escaped to get their special meaning. For example, if you escape a digit in the replacement string, it will turn in to a backreference.
As Ben Blank said, there are only three characters that need to be escaped in the replacement string (escapes themselves, forward slash for end of statement and & for replace all):
ESCAPED_REPLACE=$(printf '%s\n' "$REPLACE" | sed -e 's/[\/&]/\\&/g')
# Now you can use ESCAPED_REPLACE in the original sed statement
sed "s/KEYWORD/$ESCAPED_REPLACE/g"
If you ever need to escape the KEYWORD string, the following is the one you need:
sed -e 's/[]\/$*.^[]/\\&/g'
And can be used by:
KEYWORD="The Keyword You Need";
ESCAPED_KEYWORD=$(printf '%s\n' "$KEYWORD" | sed -e 's/[]\/$*.^[]/\\&/g');
# Now you can use it inside the original sed statement to replace text
sed "s/$ESCAPED_KEYWORD/$ESCAPED_REPLACE/g"
Remember, if you use a character other than / as delimiter, you need replace the slash in the expressions above wih the character you are using. See PeterJCLaw's comment for explanation.
Edited: Due to some corner cases previously not accounted for, the commands above have changed several times. Check the edit history for details.
The sed command allows you to use other characters instead of / as separator:
sed 's#"http://www\.fubar\.com"#URL_FUBAR#g'
The double quotes are not a problem.
The only three literal characters which are treated specially in the replace clause are / (to close the clause), \ (to escape characters, backreference, &c.), and & (to include the match in the replacement). Therefore, all you need to do is escape those three characters:
sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
Example:
$ export REPLACE="'\"|\\/><&!"
$ echo fooKEYWORDbar | sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
foo'"|\/><&!bar
Based on Pianosaurus's regular expressions, I made a bash function that escapes both keyword and replacement.
function sedeasy {
sed -i "s/$(echo $1 | sed -e 's/\([[\/.*]\|\]\)/\\&/g')/$(echo $2 | sed -e 's/[\/&]/\\&/g')/g" $3
}
Here's how you use it:
sedeasy "include /etc/nginx/conf.d/*" "include /apps/*/conf/nginx.conf" /etc/nginx/nginx.conf
It's a bit late to respond... but there IS a much simpler way to do this. Just change the delimiter (i.e., the character that separates fields). So, instead of s/foo/bar/ you write s|bar|foo.
And, here's the easy way to do this:
sed 's|/\*!50017 DEFINER=`snafu`#`localhost`\*/||g'
The resulting output is devoid of that nasty DEFINER clause.
It turns out you're asking the wrong question. I also asked the wrong question. The reason it's wrong is the beginning of the first sentence: "In my bash script...".
I had the same question & made the same mistake. If you're using bash, you don't need to use sed to do string replacements (and it's much cleaner to use the replace feature built into bash).
Instead of something like, for example:
function escape-all-funny-characters() { UNKNOWN_CODE_THAT_ANSWERS_THE_QUESTION_YOU_ASKED; }
INPUT='some long string with KEYWORD that need replacing KEYWORD.'
A="$(escape-all-funny-characters 'KEYWORD')"
B="$(escape-all-funny-characters '<funny characters here>')"
OUTPUT="$(sed "s/$A/$B/g" <<<"$INPUT")"
you can use bash features exclusively:
INPUT='some long string with KEYWORD that need replacing KEYWORD.'
A='KEYWORD'
B='<funny characters here>'
OUTPUT="${INPUT//"$A"/"$B"}"
Use awk - it is cleaner:
$ awk -v R='//addr:\\file' '{ sub("THIS", R, $0); print $0 }' <<< "http://file:\_THIS_/path/to/a/file\\is\\\a\\ nightmare"
http://file:\_//addr:\file_/path/to/a/file\\is\\\a\\ nightmare
Here is an example of an AWK I used a while ago. It is an AWK that prints new AWKS. AWK and SED being similar it may be a good template.
ls | awk '{ print "awk " "'"'"'" " {print $1,$2,$3} " "'"'"'" " " $1 ".old_ext > " $1 ".new_ext" }' > for_the_birds
It looks excessive, but somehow that combination of quotes works to keep the ' printed as literals. Then if I remember correctly the vaiables are just surrounded with quotes like this: "$1". Try it, let me know how it works with SED.
These are the escape codes that I've found:
* = \x2a
( = \x28
) = \x29
" = \x22
/ = \x2f
\ = \x5c
' = \x27
? = \x3f
% = \x25
^ = \x5e
sed is typically a mess, especially the difference between gnu-sed and bsd-sed
might just be easier to place some sort of sentinel at the sed side, then a quick pipe over to awk, which is far more flexible in accepting any ERE regex, escaped hex, or escaped octals.
e.g. OFS in awk is the true replacement ::
date | sed -E 's/[0-9]+/\xC1\xC0/g' |
mawk NF=NF FS='\xC1\xC0' OFS='\360\237\244\241'
1 Tue Aug 🤡 🤡:🤡:🤡 EDT 🤡
(tested and confirmed working on both BSD-sed and GNU-sed - the emoji isn't a typo that's what those 4 bytes map to in UTF-8 )
There are dozens of answers out there... If you don't mind using a bash function schema, below is a good answer. The objective below was to allow using sed with practically any parameter as a KEYWORD (F_PS_TARGET) or as a REPLACE (F_PS_REPLACE). We tested it in many scenarios and it seems to be pretty safe. The implementation below supports tabs, line breaks and sigle quotes for both KEYWORD and replace REPLACE.
NOTES: The idea here is to use sed to escape entries for another sed command.
CODE
F_REVERSE_STRING_R=""
f_reverse_string() {
: 'Do a string reverse.
To undo just use a reversed string as STRING_INPUT.
Args:
STRING_INPUT (str): String input.
Returns:
F_REVERSE_STRING_R (str): The modified string.
'
local STRING_INPUT=$1
F_REVERSE_STRING_R=$(echo "x${STRING_INPUT}x" | tac | rev)
F_REVERSE_STRING_R=${F_REVERSE_STRING_R%?}
F_REVERSE_STRING_R=${F_REVERSE_STRING_R#?}
}
# [Ref(s).: https://stackoverflow.com/a/2705678/3223785 ]
F_POWER_SED_ECP_R=""
f_power_sed_ecp() {
: 'Escape strings for the "sed" command.
Escaped characters will be processed as is (e.g. /n, /t ...).
Args:
F_PSE_VAL_TO_ECP (str): Value to be escaped.
F_PSE_ECP_TYPE (int): 0 - For the TARGET value; 1 - For the REPLACE value.
Returns:
F_POWER_SED_ECP_R (str): Escaped value.
'
local F_PSE_VAL_TO_ECP=$1
local F_PSE_ECP_TYPE=$2
# NOTE: Operational characters of "sed" will be escaped, as well as single quotes.
# By Questor
if [ ${F_PSE_ECP_TYPE} -eq 0 ] ; then
# NOTE: For the TARGET value. By Questor
F_POWER_SED_ECP_R=$(echo "x${F_PSE_VAL_TO_ECP}x" | sed 's/[]\/$*.^[]/\\&/g' | sed "s/'/\\\x27/g" | sed ':a;N;$!ba;s/\n/\\n/g')
else
# NOTE: For the REPLACE value. By Questor
F_POWER_SED_ECP_R=$(echo "x${F_PSE_VAL_TO_ECP}x" | sed 's/[\/&]/\\&/g' | sed "s/'/\\\x27/g" | sed ':a;N;$!ba;s/\n/\\n/g')
fi
F_POWER_SED_ECP_R=${F_POWER_SED_ECP_R%?}
F_POWER_SED_ECP_R=${F_POWER_SED_ECP_R#?}
}
# [Ref(s).: https://stackoverflow.com/a/24134488/3223785 ,
# https://stackoverflow.com/a/21740695/3223785 ,
# https://unix.stackexchange.com/a/655558/61742 ,
# https://stackoverflow.com/a/11461628/3223785 ,
# https://stackoverflow.com/a/45151986/3223785 ,
# https://linuxaria.com/pills/tac-and-rev-to-see-files-in-reverse-order ,
# https://unix.stackexchange.com/a/631355/61742 ]
F_POWER_SED_R=""
f_power_sed() {
: 'Facilitate the use of the "sed" command. Replaces in files and strings.
Args:
F_PS_TARGET (str): Value to be replaced by the value of F_PS_REPLACE.
F_PS_REPLACE (str): Value that will replace F_PS_TARGET.
F_PS_FILE (Optional[str]): File in which the replacement will be made.
F_PS_SOURCE (Optional[str]): String to be manipulated in case "F_PS_FILE" was
not informed.
F_PS_NTH_OCCUR (Optional[int]): [1~n] - Replace the nth match; [n~-1] - Replace
the last nth match; 0 - Replace every match; Default 1.
Returns:
F_POWER_SED_R (str): Return the result if "F_PS_FILE" is not informed.
'
local F_PS_TARGET=$1
local F_PS_REPLACE=$2
local F_PS_FILE=$3
local F_PS_SOURCE=$4
local F_PS_NTH_OCCUR=$5
if [ -z "$F_PS_NTH_OCCUR" ] ; then
F_PS_NTH_OCCUR=1
fi
local F_PS_REVERSE_MODE=0
if [ ${F_PS_NTH_OCCUR} -lt -1 ] ; then
F_PS_REVERSE_MODE=1
f_reverse_string "$F_PS_TARGET"
F_PS_TARGET="$F_REVERSE_STRING_R"
f_reverse_string "$F_PS_REPLACE"
F_PS_REPLACE="$F_REVERSE_STRING_R"
f_reverse_string "$F_PS_SOURCE"
F_PS_SOURCE="$F_REVERSE_STRING_R"
F_PS_NTH_OCCUR=$((-F_PS_NTH_OCCUR))
fi
f_power_sed_ecp "$F_PS_TARGET" 0
F_PS_TARGET=$F_POWER_SED_ECP_R
f_power_sed_ecp "$F_PS_REPLACE" 1
F_PS_REPLACE=$F_POWER_SED_ECP_R
local F_PS_SED_RPL=""
if [ ${F_PS_NTH_OCCUR} -eq -1 ] ; then
# NOTE: We kept this option because it performs better when we only need to replace
# the last occurrence. By Questor
# [Ref(s).: https://linuxhint.com/use-sed-replace-last-occurrence/ ,
# https://unix.stackexchange.com/a/713866/61742 ]
F_PS_SED_RPL="'s/\(.*\)$F_PS_TARGET/\1$F_PS_REPLACE/'"
elif [ ${F_PS_NTH_OCCUR} -gt 0 ] ; then
# [Ref(s).: https://unix.stackexchange.com/a/587924/61742 ]
F_PS_SED_RPL="'s/$F_PS_TARGET/$F_PS_REPLACE/$F_PS_NTH_OCCUR'"
elif [ ${F_PS_NTH_OCCUR} -eq 0 ] ; then
F_PS_SED_RPL="'s/$F_PS_TARGET/$F_PS_REPLACE/g'"
fi
# NOTE: As the "sed" commands below always process literal values for the "F_PS_TARGET"
# so we use the "-z" flag in case it has multiple lines. By Quaestor
# [Ref(s).: https://unix.stackexchange.com/a/525524/61742 ]
if [ -z "$F_PS_FILE" ] ; then
F_POWER_SED_R=$(echo "x${F_PS_SOURCE}x" | eval "sed -z $F_PS_SED_RPL")
F_POWER_SED_R=${F_POWER_SED_R%?}
F_POWER_SED_R=${F_POWER_SED_R#?}
if [ ${F_PS_REVERSE_MODE} -eq 1 ] ; then
f_reverse_string "$F_POWER_SED_R"
F_POWER_SED_R="$F_REVERSE_STRING_R"
fi
else
if [ ${F_PS_REVERSE_MODE} -eq 0 ] ; then
eval "sed -i -z $F_PS_SED_RPL \"$F_PS_FILE\""
else
tac "$F_PS_FILE" | rev | eval "sed -z $F_PS_SED_RPL" | tac | rev > "$F_PS_FILE"
fi
fi
}
MODEL
f_power_sed "F_PS_TARGET" "F_PS_REPLACE" "" "F_PS_SOURCE"
echo "$F_POWER_SED_R"
EXAMPLE
f_power_sed "{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate" "[ ]+|$/,\"\0\"" "" "Great answer (+1). If you change your awk to awk '{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate that concatenation of the final \", \" then you don't have to go through the gymnastics on eliminating the final record. So: readarray -td '' a < <(awk '{ gsub(/,[ ]+/,\"\0\"); print; }' <<<\"$string\") on Bash that supports readarray. Note your method is Bash 4.4+ I think because of the -d in readar"
echo "$F_POWER_SED_R"
IF YOU JUST WANT TO ESCAPE THE PARAMETERS TO THE SED COMMAND
MODEL
# "TARGET" value.
f_power_sed_ecp "F_PSE_VAL_TO_ECP" 0
echo "$F_POWER_SED_ECP_R"
# "REPLACE" value.
f_power_sed_ecp "F_PSE_VAL_TO_ECP" 1
echo "$F_POWER_SED_ECP_R"
IMPORTANT: If the strings for KEYWORD and/or replace REPLACE contain tabs or line breaks you will need to use the "-z" flag in your "sed" command. More details here.
EXAMPLE
f_power_sed_ecp "{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate" 0
echo "$F_POWER_SED_ECP_R"
f_power_sed_ecp "[ ]+|$/,\"\0\"" 1
echo "$F_POWER_SED_ECP_R"
NOTE: The f_power_sed_ecp and f_power_sed functions above was made available completely free as part of this project ez_i - Create shell script installers easily!.
Standard recommendation here: use perl :)
echo KEYWORD > /tmp/test
REPLACE="<funny characters here>"
perl -pi.bck -e "s/KEYWORD/${REPLACE}/g" /tmp/test
cat /tmp/test
don't forget all the pleasure that occur with the shell limitation around " and '
so (in ksh)
Var=">New version of \"content' here <"
printf "%s" "${Var}" | sed "s/[&\/\\\\*\\"']/\\&/g' | read -r EscVar
echo "Here is your \"text\" to change" | sed "s/text/${EscVar}/g"
If the case happens to be that you are generating a random password to pass to sed replace pattern, then you choose to be careful about which set of characters in the random string. If you choose a password made by encoding a value as base64, then there is is only character that is both possible in base64 and is also a special character in sed replace pattern. That character is "/", and is easily removed from the password you are generating:
# password 32 characters log, minus any copies of the "/" character.
pass=`openssl rand -base64 32 | sed -e 's/\///g'`;
If you are just looking to replace Variable value in sed command then just remove
Example:
sed -i 's/dev-/dev-$ENV/g' test to sed -i s/dev-/dev-$ENV/g test
I have an improvement over the sedeasy function, which WILL break with special characters like tab.
function sedeasy_improved {
sed -i "s/$(
echo "$1" | sed -e 's/\([[\/.*]\|\]\)/\\&/g'
| sed -e 's:\t:\\t:g'
)/$(
echo "$2" | sed -e 's/[\/&]/\\&/g'
| sed -e 's:\t:\\t:g'
)/g" "$3"
}
So, whats different? $1 and $2 wrapped in quotes to avoid shell expansions and preserve tabs or double spaces.
Additional piping | sed -e 's:\t:\\t:g' (I like : as token) which transforms a tab in \t.
An easier way to do this is simply building the string before hand and using it as a parameter for sed
rpstring="s/KEYWORD/$REPLACE/g"
sed -i $rpstring test.txt
I'm trying to extract substring after the last period (dot).
examples below.
echo "filename..txt" should return "txt"
echo "filename.txt." should return ""
echo "filename" should return ""
echo "filename.xml" should return "xml"
I tried below. but works only if the character(dot) exists once. But my filename may have (dot) for 0 or more times.
echo "filename.txt" | cut -d "." -f2
Let's use awk!
awk -F"." '{print (NF>1)? $NF : ""}' file
This sets field separator to . and prints the last one. But if there is none, it prints an empty string.
Test
$ cat file
filename..txt
filename.txt.
filename
filename.xml
$ awk -F"." '{print (NF>1)? $NF : ""}' file
txt
xml
One can make this portable (so it's not Linux-only), avoiding an ERE dependency, with the following:
$ sed -ne 's/.*\.//p' <<< "file..txt"
txt
$ sed -ne 's/.*\.//p' <<< "file.txt."
$ sed -ne 's/.*\.//p' <<< "file"
$ sed -ne 's/.*\.//p' <<< "file.xml"
xml
Note that for testing purposes, I'm using a "here-string" in bash. If your shell is not bash, use whatever your shell uses to feed data to sed.
The important bit here is the use of sed's -n option, which tells it not to print anything by default, combined with the substitute command's explicit p flag, which tells sed to print only upon a successful substitution, which obviously requires a dot to be included in the pattern.
With this solution, the difference between "file.txt." and "file" is that the former returns the input line replaced with null (so you may still get a newline depending on your usage), whereas the latter returns nothing, as sed is not instructed to print, as no . is included in the input. The end result may well be the same, of course:
$ printf "#%s#\n" $(sed -ne 's/.*\.//p' <<< "file.txt.")
##
$ printf "#%s#\n" $(sed -ne 's/.*\.//p' <<< "file")
##
Simple to do with awk:
awk -F"." '{ print $NF }'
What this does: With dot as a delimiter, extract the last field from the input.
Use sed in 2 steps: first remove string without a dot and than remove up to the last dot:
sed -e 's/^[^.]*$//' -e 's/.*\.//'
Test:
for s in file.txt.. file.txt. file.txt filename file.xml; do
echo "$s -> $(echo "$s" | sed -e 's/^[^.]*$//' -e 's/.*\.//')"
done
Testresult:
file.txt.. ->
file.txt. ->
file.txt -> txt
filename ->
file.xml -> xml
Actually the answer of #ghoti is roughly the same, just a bit shorter (better).
This solution can be used by other readers who wants to do something like this in another language.
I want to split a text with comma , not space in for foo in list. Suppose I have a CSV file CSV_File with following text inside it:
Hello,World,Questions,Answers,bash shell,script
...
I used following code to split it into several words:
for word in $(cat CSV_File | sed -n 1'p' | tr ',' '\n')
do echo $word
done
It prints:
Hello
World
Questions
Answers
bash
shell
script
But I want it to split the text by commas not spaces:
Hello
World
Questions
Answers
bash shell
script
How can I achieve this in bash?
Set IFS to ,:
sorin#sorin:~$ IFS=',' ;for i in `echo "Hello,World,Questions,Answers,bash shell,script"`; do echo $i; done
Hello
World
Questions
Answers
bash shell
script
sorin#sorin:~$
Using a subshell substitution to parse the words undoes all the work you are doing to put spaces together.
Try instead:
cat CSV_file | sed -n 1'p' | tr ',' '\n' | while read word; do
echo $word
done
That also increases parallelism. Using a subshell as in your question forces the entire subshell process to finish before you can start iterating over the answers. Piping to a subshell (as in my answer) lets them work in parallel. This matters only if you have many lines in the file, of course.
I think the canonical method is:
while IFS=, read field1 field2 field3 field4 field5 field6; do
do stuff
done < CSV.file
If you don't know or don't care about how many fields there are:
IFS=,
while read line; do
# split into an array
field=( $line )
for word in "${field[#]}"; do echo "$word"; done
# or use the positional parameters
set -- $line
for word in "$#"; do echo "$word"; done
done < CSV.file
kent$ echo "Hello,World,Questions,Answers,bash shell,script"|awk -F, '{for (i=1;i<=NF;i++)print $i}'
Hello
World
Questions
Answers
bash shell
script
Create a bash function
split_on_commas() {
local IFS=,
local WORD_LIST=($1)
for word in "${WORD_LIST[#]}"; do
echo "$word"
done
}
split_on_commas "this,is a,list" | while read item; do
# Custom logic goes here
echo Item: ${item}
done
... this generates the following output:
Item: this
Item: is a
Item: list
(Note, this answer has been updated according to some feedback)
Read: http://linuxmanpages.com/man1/sh.1.php
& http://www.gnu.org/s/hello/manual/autoconf/Special-Shell-Variables.html
IFS The Internal Field Separator that is used for word splitting
after expansion and to split lines into words with the read
builtin command. The default value is ``''.
IFS is a shell environment variable so it will remain unchanged within the context of your Shell script but not otherwise, unless you EXPORT it. ALSO BE AWARE, that IFS will not likely be inherited from your Environment at all: see this gnu post for the reasons and more info on IFS.
You're code written like this:
IFS=","
for word in $(cat tmptest | sed -n 1'p' | tr ',' '\n'); do echo $word; done;
should work, I tested it on command line.
sh-3.2#IFS=","
sh-3.2#for word in $(cat tmptest | sed -n 1'p' | tr ',' '\n'); do echo $word; done;
World
Questions
Answers
bash shell
script
You can use:
cat f.csv | sed 's/,/ /g' | awk '{print $1 " / " $4}'
or
echo "Hello,World,Questions,Answers,bash shell,script" | sed 's/,/ /g' | awk '{print $1 " / " $4}'
This is the part that replace comma with space
sed 's/,/ /g'
For me, use array split is simpler ref
IN="bla#some.com;john#home.com"
arrIN=(${IN//;/ })
echo ${arrIN[1]}
Using readarray(mapfile):
$ cat csf
Hello,World,Questions,Answers,bash shell,script
$ readarray -td, arr < csf
$ printf '%s\n' "${arr[#]}"
Hello
World
Questions
Answers
bash shell
script
In my bash script I have an external (received from user) string, which I should use in sed pattern.
REPLACE="<funny characters here>"
sed "s/KEYWORD/$REPLACE/g"
How can I escape the $REPLACE string so it would be safely accepted by sed as a literal replacement?
NOTE: The KEYWORD is a dumb substring with no matches etc. It is not supplied by user.
Warning: This does not consider newlines. For a more in-depth answer, see this SO-question instead. (Thanks, Ed Morton & Niklas Peter)
Note that escaping everything is a bad idea. Sed needs many characters to be escaped to get their special meaning. For example, if you escape a digit in the replacement string, it will turn in to a backreference.
As Ben Blank said, there are only three characters that need to be escaped in the replacement string (escapes themselves, forward slash for end of statement and & for replace all):
ESCAPED_REPLACE=$(printf '%s\n' "$REPLACE" | sed -e 's/[\/&]/\\&/g')
# Now you can use ESCAPED_REPLACE in the original sed statement
sed "s/KEYWORD/$ESCAPED_REPLACE/g"
If you ever need to escape the KEYWORD string, the following is the one you need:
sed -e 's/[]\/$*.^[]/\\&/g'
And can be used by:
KEYWORD="The Keyword You Need";
ESCAPED_KEYWORD=$(printf '%s\n' "$KEYWORD" | sed -e 's/[]\/$*.^[]/\\&/g');
# Now you can use it inside the original sed statement to replace text
sed "s/$ESCAPED_KEYWORD/$ESCAPED_REPLACE/g"
Remember, if you use a character other than / as delimiter, you need replace the slash in the expressions above wih the character you are using. See PeterJCLaw's comment for explanation.
Edited: Due to some corner cases previously not accounted for, the commands above have changed several times. Check the edit history for details.
The sed command allows you to use other characters instead of / as separator:
sed 's#"http://www\.fubar\.com"#URL_FUBAR#g'
The double quotes are not a problem.
The only three literal characters which are treated specially in the replace clause are / (to close the clause), \ (to escape characters, backreference, &c.), and & (to include the match in the replacement). Therefore, all you need to do is escape those three characters:
sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
Example:
$ export REPLACE="'\"|\\/><&!"
$ echo fooKEYWORDbar | sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
foo'"|\/><&!bar
Based on Pianosaurus's regular expressions, I made a bash function that escapes both keyword and replacement.
function sedeasy {
sed -i "s/$(echo $1 | sed -e 's/\([[\/.*]\|\]\)/\\&/g')/$(echo $2 | sed -e 's/[\/&]/\\&/g')/g" $3
}
Here's how you use it:
sedeasy "include /etc/nginx/conf.d/*" "include /apps/*/conf/nginx.conf" /etc/nginx/nginx.conf
It's a bit late to respond... but there IS a much simpler way to do this. Just change the delimiter (i.e., the character that separates fields). So, instead of s/foo/bar/ you write s|bar|foo.
And, here's the easy way to do this:
sed 's|/\*!50017 DEFINER=`snafu`#`localhost`\*/||g'
The resulting output is devoid of that nasty DEFINER clause.
It turns out you're asking the wrong question. I also asked the wrong question. The reason it's wrong is the beginning of the first sentence: "In my bash script...".
I had the same question & made the same mistake. If you're using bash, you don't need to use sed to do string replacements (and it's much cleaner to use the replace feature built into bash).
Instead of something like, for example:
function escape-all-funny-characters() { UNKNOWN_CODE_THAT_ANSWERS_THE_QUESTION_YOU_ASKED; }
INPUT='some long string with KEYWORD that need replacing KEYWORD.'
A="$(escape-all-funny-characters 'KEYWORD')"
B="$(escape-all-funny-characters '<funny characters here>')"
OUTPUT="$(sed "s/$A/$B/g" <<<"$INPUT")"
you can use bash features exclusively:
INPUT='some long string with KEYWORD that need replacing KEYWORD.'
A='KEYWORD'
B='<funny characters here>'
OUTPUT="${INPUT//"$A"/"$B"}"
Use awk - it is cleaner:
$ awk -v R='//addr:\\file' '{ sub("THIS", R, $0); print $0 }' <<< "http://file:\_THIS_/path/to/a/file\\is\\\a\\ nightmare"
http://file:\_//addr:\file_/path/to/a/file\\is\\\a\\ nightmare
Here is an example of an AWK I used a while ago. It is an AWK that prints new AWKS. AWK and SED being similar it may be a good template.
ls | awk '{ print "awk " "'"'"'" " {print $1,$2,$3} " "'"'"'" " " $1 ".old_ext > " $1 ".new_ext" }' > for_the_birds
It looks excessive, but somehow that combination of quotes works to keep the ' printed as literals. Then if I remember correctly the vaiables are just surrounded with quotes like this: "$1". Try it, let me know how it works with SED.
These are the escape codes that I've found:
* = \x2a
( = \x28
) = \x29
" = \x22
/ = \x2f
\ = \x5c
' = \x27
? = \x3f
% = \x25
^ = \x5e
sed is typically a mess, especially the difference between gnu-sed and bsd-sed
might just be easier to place some sort of sentinel at the sed side, then a quick pipe over to awk, which is far more flexible in accepting any ERE regex, escaped hex, or escaped octals.
e.g. OFS in awk is the true replacement ::
date | sed -E 's/[0-9]+/\xC1\xC0/g' |
mawk NF=NF FS='\xC1\xC0' OFS='\360\237\244\241'
1 Tue Aug 🤡 🤡:🤡:🤡 EDT 🤡
(tested and confirmed working on both BSD-sed and GNU-sed - the emoji isn't a typo that's what those 4 bytes map to in UTF-8 )
There are dozens of answers out there... If you don't mind using a bash function schema, below is a good answer. The objective below was to allow using sed with practically any parameter as a KEYWORD (F_PS_TARGET) or as a REPLACE (F_PS_REPLACE). We tested it in many scenarios and it seems to be pretty safe. The implementation below supports tabs, line breaks and sigle quotes for both KEYWORD and replace REPLACE.
NOTES: The idea here is to use sed to escape entries for another sed command.
CODE
F_REVERSE_STRING_R=""
f_reverse_string() {
: 'Do a string reverse.
To undo just use a reversed string as STRING_INPUT.
Args:
STRING_INPUT (str): String input.
Returns:
F_REVERSE_STRING_R (str): The modified string.
'
local STRING_INPUT=$1
F_REVERSE_STRING_R=$(echo "x${STRING_INPUT}x" | tac | rev)
F_REVERSE_STRING_R=${F_REVERSE_STRING_R%?}
F_REVERSE_STRING_R=${F_REVERSE_STRING_R#?}
}
# [Ref(s).: https://stackoverflow.com/a/2705678/3223785 ]
F_POWER_SED_ECP_R=""
f_power_sed_ecp() {
: 'Escape strings for the "sed" command.
Escaped characters will be processed as is (e.g. /n, /t ...).
Args:
F_PSE_VAL_TO_ECP (str): Value to be escaped.
F_PSE_ECP_TYPE (int): 0 - For the TARGET value; 1 - For the REPLACE value.
Returns:
F_POWER_SED_ECP_R (str): Escaped value.
'
local F_PSE_VAL_TO_ECP=$1
local F_PSE_ECP_TYPE=$2
# NOTE: Operational characters of "sed" will be escaped, as well as single quotes.
# By Questor
if [ ${F_PSE_ECP_TYPE} -eq 0 ] ; then
# NOTE: For the TARGET value. By Questor
F_POWER_SED_ECP_R=$(echo "x${F_PSE_VAL_TO_ECP}x" | sed 's/[]\/$*.^[]/\\&/g' | sed "s/'/\\\x27/g" | sed ':a;N;$!ba;s/\n/\\n/g')
else
# NOTE: For the REPLACE value. By Questor
F_POWER_SED_ECP_R=$(echo "x${F_PSE_VAL_TO_ECP}x" | sed 's/[\/&]/\\&/g' | sed "s/'/\\\x27/g" | sed ':a;N;$!ba;s/\n/\\n/g')
fi
F_POWER_SED_ECP_R=${F_POWER_SED_ECP_R%?}
F_POWER_SED_ECP_R=${F_POWER_SED_ECP_R#?}
}
# [Ref(s).: https://stackoverflow.com/a/24134488/3223785 ,
# https://stackoverflow.com/a/21740695/3223785 ,
# https://unix.stackexchange.com/a/655558/61742 ,
# https://stackoverflow.com/a/11461628/3223785 ,
# https://stackoverflow.com/a/45151986/3223785 ,
# https://linuxaria.com/pills/tac-and-rev-to-see-files-in-reverse-order ,
# https://unix.stackexchange.com/a/631355/61742 ]
F_POWER_SED_R=""
f_power_sed() {
: 'Facilitate the use of the "sed" command. Replaces in files and strings.
Args:
F_PS_TARGET (str): Value to be replaced by the value of F_PS_REPLACE.
F_PS_REPLACE (str): Value that will replace F_PS_TARGET.
F_PS_FILE (Optional[str]): File in which the replacement will be made.
F_PS_SOURCE (Optional[str]): String to be manipulated in case "F_PS_FILE" was
not informed.
F_PS_NTH_OCCUR (Optional[int]): [1~n] - Replace the nth match; [n~-1] - Replace
the last nth match; 0 - Replace every match; Default 1.
Returns:
F_POWER_SED_R (str): Return the result if "F_PS_FILE" is not informed.
'
local F_PS_TARGET=$1
local F_PS_REPLACE=$2
local F_PS_FILE=$3
local F_PS_SOURCE=$4
local F_PS_NTH_OCCUR=$5
if [ -z "$F_PS_NTH_OCCUR" ] ; then
F_PS_NTH_OCCUR=1
fi
local F_PS_REVERSE_MODE=0
if [ ${F_PS_NTH_OCCUR} -lt -1 ] ; then
F_PS_REVERSE_MODE=1
f_reverse_string "$F_PS_TARGET"
F_PS_TARGET="$F_REVERSE_STRING_R"
f_reverse_string "$F_PS_REPLACE"
F_PS_REPLACE="$F_REVERSE_STRING_R"
f_reverse_string "$F_PS_SOURCE"
F_PS_SOURCE="$F_REVERSE_STRING_R"
F_PS_NTH_OCCUR=$((-F_PS_NTH_OCCUR))
fi
f_power_sed_ecp "$F_PS_TARGET" 0
F_PS_TARGET=$F_POWER_SED_ECP_R
f_power_sed_ecp "$F_PS_REPLACE" 1
F_PS_REPLACE=$F_POWER_SED_ECP_R
local F_PS_SED_RPL=""
if [ ${F_PS_NTH_OCCUR} -eq -1 ] ; then
# NOTE: We kept this option because it performs better when we only need to replace
# the last occurrence. By Questor
# [Ref(s).: https://linuxhint.com/use-sed-replace-last-occurrence/ ,
# https://unix.stackexchange.com/a/713866/61742 ]
F_PS_SED_RPL="'s/\(.*\)$F_PS_TARGET/\1$F_PS_REPLACE/'"
elif [ ${F_PS_NTH_OCCUR} -gt 0 ] ; then
# [Ref(s).: https://unix.stackexchange.com/a/587924/61742 ]
F_PS_SED_RPL="'s/$F_PS_TARGET/$F_PS_REPLACE/$F_PS_NTH_OCCUR'"
elif [ ${F_PS_NTH_OCCUR} -eq 0 ] ; then
F_PS_SED_RPL="'s/$F_PS_TARGET/$F_PS_REPLACE/g'"
fi
# NOTE: As the "sed" commands below always process literal values for the "F_PS_TARGET"
# so we use the "-z" flag in case it has multiple lines. By Quaestor
# [Ref(s).: https://unix.stackexchange.com/a/525524/61742 ]
if [ -z "$F_PS_FILE" ] ; then
F_POWER_SED_R=$(echo "x${F_PS_SOURCE}x" | eval "sed -z $F_PS_SED_RPL")
F_POWER_SED_R=${F_POWER_SED_R%?}
F_POWER_SED_R=${F_POWER_SED_R#?}
if [ ${F_PS_REVERSE_MODE} -eq 1 ] ; then
f_reverse_string "$F_POWER_SED_R"
F_POWER_SED_R="$F_REVERSE_STRING_R"
fi
else
if [ ${F_PS_REVERSE_MODE} -eq 0 ] ; then
eval "sed -i -z $F_PS_SED_RPL \"$F_PS_FILE\""
else
tac "$F_PS_FILE" | rev | eval "sed -z $F_PS_SED_RPL" | tac | rev > "$F_PS_FILE"
fi
fi
}
MODEL
f_power_sed "F_PS_TARGET" "F_PS_REPLACE" "" "F_PS_SOURCE"
echo "$F_POWER_SED_R"
EXAMPLE
f_power_sed "{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate" "[ ]+|$/,\"\0\"" "" "Great answer (+1). If you change your awk to awk '{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate that concatenation of the final \", \" then you don't have to go through the gymnastics on eliminating the final record. So: readarray -td '' a < <(awk '{ gsub(/,[ ]+/,\"\0\"); print; }' <<<\"$string\") on Bash that supports readarray. Note your method is Bash 4.4+ I think because of the -d in readar"
echo "$F_POWER_SED_R"
IF YOU JUST WANT TO ESCAPE THE PARAMETERS TO THE SED COMMAND
MODEL
# "TARGET" value.
f_power_sed_ecp "F_PSE_VAL_TO_ECP" 0
echo "$F_POWER_SED_ECP_R"
# "REPLACE" value.
f_power_sed_ecp "F_PSE_VAL_TO_ECP" 1
echo "$F_POWER_SED_ECP_R"
IMPORTANT: If the strings for KEYWORD and/or replace REPLACE contain tabs or line breaks you will need to use the "-z" flag in your "sed" command. More details here.
EXAMPLE
f_power_sed_ecp "{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate" 0
echo "$F_POWER_SED_ECP_R"
f_power_sed_ecp "[ ]+|$/,\"\0\"" 1
echo "$F_POWER_SED_ECP_R"
NOTE: The f_power_sed_ecp and f_power_sed functions above was made available completely free as part of this project ez_i - Create shell script installers easily!.
Standard recommendation here: use perl :)
echo KEYWORD > /tmp/test
REPLACE="<funny characters here>"
perl -pi.bck -e "s/KEYWORD/${REPLACE}/g" /tmp/test
cat /tmp/test
don't forget all the pleasure that occur with the shell limitation around " and '
so (in ksh)
Var=">New version of \"content' here <"
printf "%s" "${Var}" | sed "s/[&\/\\\\*\\"']/\\&/g' | read -r EscVar
echo "Here is your \"text\" to change" | sed "s/text/${EscVar}/g"
If the case happens to be that you are generating a random password to pass to sed replace pattern, then you choose to be careful about which set of characters in the random string. If you choose a password made by encoding a value as base64, then there is is only character that is both possible in base64 and is also a special character in sed replace pattern. That character is "/", and is easily removed from the password you are generating:
# password 32 characters log, minus any copies of the "/" character.
pass=`openssl rand -base64 32 | sed -e 's/\///g'`;
If you are just looking to replace Variable value in sed command then just remove
Example:
sed -i 's/dev-/dev-$ENV/g' test to sed -i s/dev-/dev-$ENV/g test
I have an improvement over the sedeasy function, which WILL break with special characters like tab.
function sedeasy_improved {
sed -i "s/$(
echo "$1" | sed -e 's/\([[\/.*]\|\]\)/\\&/g'
| sed -e 's:\t:\\t:g'
)/$(
echo "$2" | sed -e 's/[\/&]/\\&/g'
| sed -e 's:\t:\\t:g'
)/g" "$3"
}
So, whats different? $1 and $2 wrapped in quotes to avoid shell expansions and preserve tabs or double spaces.
Additional piping | sed -e 's:\t:\\t:g' (I like : as token) which transforms a tab in \t.
An easier way to do this is simply building the string before hand and using it as a parameter for sed
rpstring="s/KEYWORD/$REPLACE/g"
sed -i $rpstring test.txt