I am Vim newbie, and I'm using MacVim on OSX Snow Leopard. One of the most common actions I have to take is to move the cursor to a new line but also move the text after the cursor to the new line. I know that pressing 'o' in normal or visual mode moves the cursor to a new line and switches the mode to insert.
What I'd like to do is move the cursor to a new line, and move the text after the cursor to that new line as well, preferably staying in the normal mode? Is this possible? How can I accomplish this task?
If the cursor is on a <space> as in ([] marks the cursor):
lorem ipsum[ ]dolor sit amet
the simplest is to do r<CR>, that is "replace the current character with a linebreak".
Otherwise, use #knittl's solution.
So you want to move everything in the current line, which comes after the cursor to the next line? Read: insert a line break??
(move cursor)
i (or a)
<return>
<esc> (or ^C)
To map this sequence of keystrokes to a single key, follow #thb's suggestion and use the :map command:
:map <F2> i<CR><ESC>
:map <F2> i<CR>
This keeps vi in insert mode.
As I answered in this post, How do I insert a linebreak where the cursor is without entering into insert mode in Vim?.
Please try Control + j.
The code below achieves the same behavior as "normal" editors (for the lack of better terms on the top of my mind) except that you'd have to press "enter" twice instead of once.
I also wanted to get rid of the space if it's right before my current character.
There might be an easier way and I totally welcome edits :-)
" in ~/.vimrc or ~/.vimrc.after if you're using janus
nnoremap <cr><cr> :call ReturnToNewLine()<cr>
function ReturnToNewLine()
let previous_char = getline(".")[col(".")-2]
" if there's a space before our current position, get rid of it first
if previous_char == ' '
execute "normal! \<bs>\<esc>"
endif
execute "normal! i\<cr>\<esc>"
endfunction
This remaps pressing enter twice to going to insert mode, placing a carriage return and escaping.
The reason I'm using this mapping (enter twice) is because I was used to this functionality with other text editors by pressing a enter; also, typing enter twice is fast.
Another thing that I found useful in this context was allowing vim to move right after the last character (in case I wanted to move the last character to a new line). So I have the following in my ~/.vimrc as well.
set virtualedit=onemore
Note that I'm using nnoremap (normal mode non-recursive) instead of map (which is VERY dangerous) (check this out for more information on the differences http://learnvimscriptthehardway.stevelosh.com/chapters/05.html)
You need to map some keys to do a line break at the cursor,
I found the following mapping easy to use, just go to your vimrc and add this line:
:map <silent> bl i<CR><ESC>
to assign a line break at cursor to "bl" combo
Is there a way to indent a selection of lines in Vim, like we have in text editors where we select a bunch of lines and press tab (or shift tab) to indent/unindent the selected lines?
I am talking about general indentation and not related to code indentation.
You can select a set of lines with visual line mode (via Shift + V), and then type
>
and, to dedent,
<
You can also add numeric arguments. Find out you didn't indent enough? Hit gv to re-select your previous selection.
While typing in normal mode, try out Ctrl + T or Ctrl + D to indent or dedent.
Use visual mode as Peter suggests. You can also use X>> where X is the number of lines you want to indent. E.g. 5>> indents five lines from current line and down.
I use the following mappings to indent/unindent:
vmap <TAB> >gv
vmap <S-TAB> <gv
Use TAB to indent and shift-TAB to unindent the visually selected lines.
If a block is selected Vim indents/unindents what is right of the start of
the block.
As suggested by the other answers you can use >. Alternatively, you can automatically correctly indent your code by selecting the set of line in visual mode (using shift+V), and then using =, or using == to indent the current line.
There's a Vim Cast on this topic: Indentation commands
I like Vim Casts. They are informative and pleasant to watch.
It should be trivial, and it might even be in the help, but I can't figure out how to navigate it. How do I indent multiple lines quickly in vi?
Use the > command. To indent five lines, 5>>. To mark a block of lines and indent it, Vjj> to indent three lines (Vim only). To indent a curly-braces block, put your cursor on one of the curly braces and use >% or from anywhere inside block use >iB.
If you’re copying blocks of text around and need to align the indent of a block in its new location, use ]p instead of just p. This aligns the pasted block with the surrounding text.
Also, the shiftwidth setting allows you to control how many spaces to indent.
This answer summarises the other answers and comments of this question, and it adds extra information based on the Vim documentation and the Vim wiki. For conciseness, this answer doesn't distinguish between Vi and Vim-specific commands.
In the commands below, "re-indent" means "indent lines according to your indentation settings." shiftwidth is the primary variable that controls indentation.
General Commands
>> Indent line by shiftwidth spaces
<< De-indent line by shiftwidth spaces
5>> Indent 5 lines
5== Re-indent 5 lines
>% Increase indent of a braced or bracketed block (place cursor on brace first)
=% Reindent a braced or bracketed block (cursor on brace)
<% Decrease indent of a braced or bracketed block (cursor on brace)
]p Paste text, aligning indentation with surroundings
=i{ Re-indent the 'inner block', i.e. the contents of the block
=a{ Re-indent 'a block', i.e. block and containing braces
=2a{ Re-indent '2 blocks', i.e. this block and containing block
>i{ Increase inner block indent
<i{ Decrease inner block indent
You can replace { with } or B, e.g. =iB is a valid block indent command. Take a look at "Indent a Code Block" for a nice example to try these commands out on.
Also, remember that
. Repeat last command
, so indentation commands can be easily and conveniently repeated.
Re-indenting complete files
Another common situation is requiring indentation to be fixed throughout a source file:
gg=G Re-indent entire buffer
You can extend this idea to multiple files:
" Re-indent all your C source code:
:args *.c
:argdo normal gg=G
:wall
Or multiple buffers:
" Re-indent all open buffers:
:bufdo normal gg=G:wall
In Visual Mode
Vjj> Visually mark and then indent three lines
In insert mode
These commands apply to the current line:
CTRL-t insert indent at start of line
CTRL-d remove indent at start of line
0 CTRL-d remove all indentation from line
Ex commands
These are useful when you want to indent a specific range of lines, without moving your
cursor.
:< and :> Given a range, apply indentation e.g.
:4,8> indent lines 4 to 8, inclusive
Indenting using markers
Another approach is via markers:
ma Mark top of block to indent as marker 'a'
...move cursor to end location
>'a Indent from marker 'a' to current location
Variables that govern indentation
You can set these in your .vimrc file.
set expandtab "Use softtabstop spaces instead of tab characters for indentation
set shiftwidth=4 "Indent by 4 spaces when using >>, <<, == etc.
set softtabstop=4 "Indent by 4 spaces when pressing <TAB>
set autoindent "Keep indentation from previous line
set smartindent "Automatically inserts indentation in some cases
set cindent "Like smartindent, but stricter and more customisable
Vim has intelligent indentation based on filetype. Try adding this to your .vimrc:
if has ("autocmd")
" File type detection. Indent based on filetype. Recommended.
filetype plugin indent on
endif
References
Indent a code block
Shifting blocks visually
Indenting source code
:help =
A big selection would be:
gg=G
It is really fast, and everything gets indented ;-)
Also try this for C-indenting indentation. Do :help = for more information:
={
That will auto-indent the current code block you're in.
Or just:
==
to auto-indent the current line.
Key presses for more visual people:
Enter Command Mode:
Escape
Move around to the start of the area to indent:
hjkl↑↓←→
Start a block:
v
Move around to the end of the area to indent:
hjkl↑↓←→
(Optional) Type the number of indentation levels you want
0..9
Execute the indentation on the block:
>
In addition to the answer already given and accepted, it is also possible to place a marker and then indent everything from the current cursor to the marker.
Thus, enter ma where you want the top of your indented block, cursor down as far as you need and then type >'a (note that "a" can be substituted for any valid marker name). This is sometimes easier than 5>> or vjjj>.
The master of all commands is
gg=G
This indents the entire file!
And below are some of the simple and elegant commands used to indent lines quickly in Vim or gVim.
To indent the current line
==
To indent the all the lines below the current line
=G
To indent n lines below the current line
n==
For example, to indent 4 lines below the current line
4==
To indent a block of code, go to one of the braces and use command
=%
These are the simplest, yet powerful commands to indent multiple lines.
When you select a block and use > to indent, it indents then goes back to normal mode. I have this in my .vimrc file:
vnoremap < <gv
vnoremap > >gv
It lets you indent your selection as many time as you want.
Go to the start of the text
press v for visual mode.
use up/down arrow to highlight text.
press = to indent all the lines you highlighted.
As well as the offered solutions, I like to do things a paragraph at a time with >}
Suppose you use 2 spaces to indent your code. Type:
:set shiftwidth=2
Type v (to enter visual block editing mode)
Move the cursor with the arrow keys (or with h/j/k/l) to highlight the lines you want to indent or unindent.
Then:
Type > to indent once (2 spaces).
Type 2> to indent twice (4 spaces).
Type 3> to indent thrice (6 spaces).
...
Type < to unindent once (2 spaces).
Type 2< to unindent twice (4 spaces).
Type 3< to unindent thrice (6 spaces).
...
You get the idea.
(Empty lines will not get indented, which I think is kind of nice.)
I found the answer in the (g)vim documentation for indenting blocks:
:help visual-block
/indent
If you want to give a count to the command, do this just before typing
the operator character: "v{move-around}3>" (move lines 3 indents to
the right).
The beauty of Vim's UI is that its consistency. Editing commands are made up of the command and a cursor move.
The cursor moves are always the same:
H to top of screen, L to bottom, M to middle
nG to go to line n, G alone to bottom of file, gg to top
n to move to next search match, N to previous
} to end of paragraph
% to next matching bracket, either of the parentheses or the tag kind
enter to the next line
'x to mark x where x is a letter or another '.
many more, including w and W for word, $ or 0 to tips of the line, etc., that don't apply here because are not line movements.
So, in order to use vim you have to learn to move the cursor and remember a repertoire of commands like, for example, > to indent (and < to "outdent").
Thus, for indenting the lines from the cursor position to the top of the screen you do >H, >G to indent to the bottom of the file.
If, instead of typing >H, you type dH then you are deleting the same block of lines, cH for replacing it, etc.
Some cursor movements fit better with specific commands. In particular, the % command is handy to indent a whole HTML or XML block. If the file has syntax highlighted (:syn on) then setting the cursor in the text of a tag (like, in the "i" of <div> and entering >% will indent up to the closing </div> tag.
This is how Vim works: one has to remember only the cursor movements and the commands, and how to mix them.
So my answer to this question would be "go to one end of the block of lines you want to indent, and then type the > command and a movement to the other end of the block" if indent is interpreted as shifting the lines, = if indent is interpreted as in pretty-printing.
You can use the norm i command to insert given text at the beginning of the line. To insert 10 spaces before lines 2-10:
:2,10norm 10i
Remember that there has to be a space character at the end of the command - this will be the character we want to have inserted. We can also indent a line with any other text, for example to indent every line in a file with five underscore characters:
:%norm 5i_
Or something even more fancy:
:%norm 2i[ ]
More practical example is commenting Bash/Python/etc code with # character:
:1,20norm i#
To re-indent use x instead of i. For example, to remove first 5 characters from every line:
:%norm 5x
:line_num_start,line_num_end>
For example,
14,21> shifts line number 14 to 21 to one tab
Increase the '>' symbol for more tabs.
For example,
14,21>>> for three tabs
Press "SHIFT + v" to enter VISUAL LINE mode.
Select the text you wish to indent but using either the cursor keys or the "j" and "k" keys.
To indent right press "SHIFT + dot" (> character).
To indent left press "SHIFT + comma" (< character).
Source: https://www.fir3net.com/UNIX/General/how-do-i-tab-multiple-lines-within-vi.html
Do this:
$vi .vimrc
And add this line:
autocmd FileType cpp setlocal expandtab shiftwidth=4 softtabstop=4 cindent
This is only for a cpp file. You can do this for another file type, also just by modifying the filetype...
A quick way to do this using VISUAL MODE uses the same process as commenting a block of code.
This is useful if you would prefer not to change your shiftwidth or use any set directives and is flexible enough to work with TABS or SPACES or any other character.
Position cursor at the beginning on the block
v to switch to -- VISUAL MODE --
Select the text to be indented
Type : to switch to the prompt
Replacing with 3 leading spaces:
:'<,'>s/^/ /g
Or replacing with leading tabs:
:'<,'>s/^/\t/g
Brief Explanation:
'<,'> - Within the Visually Selected Range
s/^/ /g - Insert 3 spaces at the beginning of every line within the whole range
(or)
s/^/\t/g - Insert Tab at the beginning of every line within the whole range
>} or >{ indent from current line up to next paragraph
<} or <{ same un-indent
I like to mark text for indentation:
go to beginning of line of text then type ma (a is the label from the 'm'ark: it could be any letter)
go to end line of text and type mz (again, z could be any letter)
:'a,'z> or :'a,'z< will indent or outdent (is this a word?)
Voila! The text is moved (empty lines remain empty with no spaces)
PS: you can use the :'a,'z technique to mark a range for any operation (d, y, s///, etc.) where you might use lines, numbers, or %.
For me, the MacVim (Visual) solution was, select with mouse and press ">", but after putting the following lines in "~/.vimrc" since I like spaces instead of tabs:
set expandtab
set tabstop=2
set shiftwidth=2
Also it's useful to be able to call MacVim from the command-line (Terminal.app), so since I have the following helper directory "~/bin", where I place a script called "macvim":
#!/usr/bin/env bash
/usr/bin/open -a /Applications/MacPorts/MacVim.app $#
And of course in "~/.bashrc":
export PATH=$PATH:$HOME/bin
MacPorts messes with "~/.profile" a lot, so the PATH environment variable can get quite long.
:help left
In ex mode you can use :left or :le to align lines a specified amount.
Specifically, :left will Left align lines in the [range]. It sets the indent in the lines to [indent] (default 0).
:%le3 or :%le 3 or :%left3 or :%left 3 will align the entire file by padding with three spaces.
:5,7 le 3 will align lines 5 through 7 by padding them with three spaces.
:le without any value or :le 0 will left align with a padding of 0.
This works in Vim and gVim.
5== will indent five lines from the current cursor position.
So you can type any number before ==. It will indent the number of lines. This is in command mode.
gg=G will indent the whole file from top to bottom.
I didn't find a method I use in the comments, so I'll share it (I think Vim only):
Esc to enter command mode
Move to the first character of the last line you want to indent
Ctrl + V to start block select
Move to the first character of the first line you want to indent
Shift + I to enter special insert mode
Type as many space/tabs as you need to indent to (two for example
Press Esc and spaces will appear in all lines
This is useful when you don't want to change indentation/tab settings in vimrc or to remember them to change it while editing.
To unindent I use the same Ctrl + V block select to select spaces and delete it with D.
I don’t know why it's so difficult to find a simple answer like this one...
I myself had to struggle a lot to know this. It's very simple:
Edit your .vimrc file under the home directory.
Add this line
set cindent
in your file where you want to indent properly.
In normal/command mode type
10== (This will indent 10 lines from the current cursor location)
gg=G (Complete file will be properly indented)
I use block-mode visual selection:
Go to the front of the block to move (at the top or bottom).
Press Ctrl + V to enter visual block mode.
Navigate to select a column in front of the lines.
Press I (Shift + I) to enter insert mode.
Type some spaces.
Press Esc. All lines will shift.
This is not a uni-tasker. It works:
In the middle of lines.
To insert any string on all lines.
To change a column (use c instead of I).
yank, delete, substitute, etc...
For a block of code, {}: = + %
For a selected line: Shift + v select using the up/down arrow keys, and then press =.
For the entire file: gg + = + G
Note: 'gg' means go to line 1, '=' is the indent command, and 'G' moves the cursor to the end of file.
For who like modern editors to indent selected line with <TAB> -> Tab and <S-TAB> -> Shift+Tab:
vnoremap <TAB> >gv
vnoremap <S-TAB> <gv
Usage:
Hit V for line-wise visual-mode, select lines you want, then hit Tab(maybe with shift), then indention applies as you want and selection remains...
Using Python a lot, I find myself needing frequently needing to shift blocks by more than one indent. You can do this by using any of the block selection methods, and then just enter the number of indents you wish to jump right before the >
For example, V5j3> will indent five lines three times - which is 12 spaces if you use four spaces for indents.
To indent every line in a file type, Esc and then G=gg.
How to indent highlighted code in vi immediately by a number of spaces:
Option 1: Indent a block of code in vi to three spaces with Visual Block mode:
Select the block of code you want to indent. Do this using Ctrl+V in normal mode and arrowing down to select text. While it is selected, enter : to give a command to the block of selected text.
The following will appear in the command line: :'<,'>
To set indent to three spaces, type le 3 and press enter. This is what appears: :'<,'>le 3
The selected text is immediately indented to three spaces.
Option 2: Indent a block of code in vi to three spaces with Visual Line mode:
Open your file in vi.
Put your cursor over some code
Be in normal mode and press the following keys:
Vjjjj:le 3
Interpretation of what you did:
V means start selecting text.
jjjj arrows down four lines, highlighting four lines.
: tells vi you will enter an instruction for the highlighted text.
le 3 means indent highlighted text three lines.
The selected code is immediately increased or decreased to three spaces indentation.
Option 3: use Visual Block mode and special insert mode to increase indent:
Open your file in vi.
Put your cursor over some code
Be in normal mode press the following keys:
Ctrl+V
jjjj
(press the spacebar five times)
Esc
Shift+i
All the highlighted text is indented an additional five spaces.