I am trying to write a script or a piece of code to archive files, but I do not want to archive anything that is currently open. I need to find a way to determine what files in a directory are open. I want to use either Perl or a shell script, but can try use other languages if needed. It will be in a Linux environment and I do not have the option to use lsof. I have also had inconsistant results with fuser. Thanks for any help.
I am trying to take log files in a directory and move them to another directory. If the files are open however, I do not want to do anything with them.
You are approaching the problem incorrectly. You wish to keep files from being modified underneath you while you are reading, and cannot do that without operating system support. The best that you can hope for in a multi-user system is to keep your archive metadata consistent.
For example, if you are creating the archive directory, make sure that the number of bytes stored in the archive matches the directory. You can checksum the file contents before and after reading the filesystem and compare that with what you wrote to the archive and perhaps flag it as "inconsistent".
What are you trying to accomplish?
Added in response to comment:
Look at logrotate to steal ideas about how to handle this consistently just have it do the work for you. If you are concerned that rename of files will make processes that are currently writing them will break things, take a look at man 2 rename:
rename() renames a file, moving it
between directories if required. Any
other hard links to the file (as
created using link(2)) are unaffected.
Open file descriptors for oldpath are
also unaffected.
If newpath already exists it will be atomically replaced (subject
to a few conditions; see ERRORS
below), so that there is no point at
which another process attempting to
access newpath will find it missing.
Try ls -l /proc/*/fd/* as root.
msw has answered the question correctly but if you want to file the list of open processes, the lsof command will give it to you.
Related
With more and more programs installed on my computer, I am tired of seeing lots of dotfiles while I have to access them often. For some reason I won't hide dotfiles when browsing files. Is there a way to move them to a better place I want them to stay (e.g. ~/.config/$PROGCONF) without affecting programs while running?
Symlinks still leave file symbols, which is far from my expectation. I expect that operations like listdirs() won't show the files while opening them uses a redirection.
"For some reason it won't hide dotfiles when browsing files.":
That depends on the file manager you use. nautilus hides it by default and most file managers have an option to "show/hide hidden files". The ls command by default omits out hidden files (files starting with a dot). It lists all files with the option -a.
"Is there a way to move them to a better place":
Programs which have support for "XDG user directories" can store their config files in `~/.config/$PROGRAM_NAME/. If the program doesn't support that and expects the config file to be present in the home directory, there is little you can do (Maybe you can give us a list of what programs' config files you want to move). The process differs for each program.
Let me give an example with vim. Its config file is ~/.vimrc. Lets say you move the file to ~/.config/vim/.vimrc. You can make vim read the file by launching vim using the following command.
vim -u ~/.config/vim/.vimrc
You can modify the .desktop entry or create a new shell script to launch vim using the above command and put it inside /usr/local/bin/ or create shell functions / aliases. You can read more about changing vim's config file location in this SO question.
This arch wiki article has application specific information.
"without affecting programs while running":
It depends on a few factors namely the file system used, the program we are dealing with and so on.
Generally, deleting / moving files only unlinks the file name from an inode and programs read / write files using inodes. Read more here. And most programs read the config file at the start, load the values into memory. They rarely read the config files again. So, if you move your config file while the program is running (assuming the program supports config in both places), you won't see a difference until the program is restarted.
"I expect that operations like listdirs() won't show the files"
I am assuming you are talking about os.listdir() in python. If files are present, os.listdir() will list them, there is little you can change about that. But you can write custom functions to omit out the hidden files from being listed.
This SO question can help with that.
I am looking for some kind of logic in linux where I can place files with same name in a directory or file system.
For e.g. i create a file abc.txt, so the next time if any process creates abc.txt it should automatically check and make the file named as abc.txt.1 should be created, then next time abc.txt.2 and so on...
Is there a way to achieve this.
Any logic or third party tools are also welcomed.
You ask,
For e.g. i create a file abc.txt, so the next time if any process
creates abc.txt it should automatically check and make the file named
as abc.txt.1 should be created
(emphasis added). To obtain such an effect automatically, for every process, without explicit provision by processes, it would have to be implemented as a feature of the filesystem containing the files. Such filesystems are called versioning filesystems, though typically the details are slightly different from what you describe. Most importantly, however, although such filesystems exist for Linux, none of them are mainstream. To the best of my knowledge, none of the major Linux distributions even offers one as a distribution-supported option.
Although it's a bit dated, see also Linux file versioning?
You might be able to approximate that for many programs via a customized version of the C standard library, but that's not foolproof, and you should not expect it to have universal effect.
It would be an altogether different matter for an individual process to be coded for such behavior. It would need to check for existing files and choose an appropriate name when opening each new file. In doing so, some care needs to be taken to avoid related race conditions, but it can be done. Details would depend on the language in which you are writing.
You can use BASH expression to achieve this. For example if I wanted to make 10 files all with the same name, but having a unique number value I would do the following:
# touch my_file{01..10}.txt
This would create 10 files starting at 01 all the way to 10. This method is also hand for looping over files in a sequence or if your also creating directories.
Now if i am reading you question right your asking that if you move a file or create a file in a directory. you would want the a script to automatically create a new file for you? If that is the case then just use a test and if there is a file move that file and mark it. Me personally I use time stamps to do so.
Logic:
# The [ -f ] tests if the file is present
if [ -f $MY_FILE_NAME ]; then
# If the file is present move the file and give it the PID
# That way the name will always be unique
mv $MY_FILE_NAME $MY_FILE_NAME_$$
mv $MY_NEW_FILE .
else
# Move or make the file here
mv $MY_NEW_FILE .
fi
As you can see the logic is very simple. Hope this helps.
Cheers
I don't know about Your particular use case, but You may try to look at logrotate:
https://wiki.archlinux.org/index.php/Logrotate
I need a program to list all the file that are accessed/opened by a process in Linux.
It should work like this,
o/p: The full path of the files that the process is accessing.
Don't want to use 'lsof' utility or any other utility.
Is there anyway to achieve this programmatically?
If you want just the files which are accessible thru opened file descriptors by process of pid 1234, list the /proc/1234/fd/ directory (most of the entries are symlinks). You'll also get additional details thru /proc/1234/fdinfo/
Try
ls -l /proc/self/fd/
to get an idea of what these files contain.
Programatically you could use readdir(3) after opendir(3) on these directories (and also readlink(2), at least for entries in /proc/1234/fd/ ....). See also proc(5)
Notice that /proc/ is Linux specific. Some other Unixes have it (e.g. Solaris), with very different contents, properties, semantics.
If you care also about files which have been opened and closed in the past by some process, it is much more difficult. See also inotify(7) and ptrace(2)...
To convert a file path to a "canonical" absolute fiile path, use realpath(3).
Recently I was asked the following question in an interview.
Suppose I try to create a new file named myfile.txt in the /home/pavan directory.
It should automatically create myfileCopy.txt in the same directory.
A.txt then it automatically creates ACopy.txt,
B.txt then BCopy.txt in the same directory.
How can this be done using a script? I may know that this script should run in crontab.
Please don't use inotify-tools.
Can you explain why you want to do?
Tools like VIM can create a backup copy of a file you're working on automatically. Other tools like Dropbox (which works on Linux, Windows, and Mac) can version files, so it backs up all the copies of the file for the last 30 days.
You could do something by creating aliases to the tools you use for creating these file. You edit a file with the tools you tend to use, and the alias could create a copy before invoking a tool.
Otherwise, your choice is to use crontab to occasionally make backups.
Addendum
let me explain suppose i have directory /home/pavan now i create the file myfile.txt in that directory , immediately now i should automatically generate myfileCopy.txt file in the same folder
paven
There's no easy user tool that could do that. In fact, the way you stated it, it's not clear exactly what you want to do and why. Backups are done for two reasons:
To save an older version of the file in case I need to undo recent changes. In your scenario, I'm simply saving a new unchanged file.
To save a file in case of disaster. I want that file to be located elsewhere: On a different computer, maybe in a different physical location, or at least not on the same disk drive as my current file. In your case, you're making the backup in the same directory.
Tools like VIM can be set to automatically backup a file you're editing. This satisfy reason #1 stated above: To get back an older revision of the file. EMACs could create an infinite series of backups.
Tools like Dropbox create a backup of your file in a different location across the aether. This satisfies reason #2 which will keep the file incase of a disaster. Dropbox also versions files you save which also is reason #1.
Version control tools can also do both, if I remember to commit my changes. They store all changes in my file (reason #1) and can store this on a server in a remote location (reason #2).
I was thinking of crontab, but what would I backup? Backup any file that had been modified (reason #1), but that doesn't make too much sense if I'm storing it in the same directory. All I would have are duplicate copies of files. It would make sense to backup the previous version, but how would I get a simple crontab to know this? Do you want to keep the older version of a file, or only the original copy?
The only real way to do this is at the system level with tools that layer over the disk IO calls. For example, at one location, we used Netapps to create a $HOME/.snapshot directory that contained the way your directory looked every minute for an hour, every hour for a day, and every day for a month. If someone deleted a file or messed it up, there was a good chance that the version of the file exists somewhere in the $HOME/.snapshot directory.
On my Mac, I use a combination of Time Machine - which backs up the entire drive every hour, and gives me a snapshot of my drive that stretches back over a year and a half) and Dropbox which keeps my files stored in the main Dropbox server somewhere. I've been saved many times by that combination.
I now understand that this was an interview question. I'm not sure what was the position. Did the questioner want you to come up with a system wide way of implementing this, like a network tech position, or was this one of those brain leaks that someone comes up with at the spur of the moment when they interview someone, but were too drunk the night before to go over what they should really ask the applicant?
Did they want a whole discussion on what backups are for, and why backing up a file immediately upon creation in the same directory is a stupid idea non-optimal solution, or were they attempting to solve an issue that came up, but aren't technical enough to understand the real issue?
How could I track changes of specific directory in UNIX? For example, I launch some utility which create some files during its execution. I want to know what exact files were created during one particular launch. Is there any simple way to get such information? Problem is that:
I cannot flush directory content after script execution
Files created with the name that has hash as a compound part. There is no possibility to get this hash from script for subsequent search.
There could be several scripts executed simultaneously, I do not want to see files created by another process in the same folder.
Please notice that I do not want to know whether directory has been changed as stated here, I need filenames which ideally could be grepped to match specific pattern.
You need to subscribe to file system change notifications.
You should use something like FAM, gamin, or inotify to detect when a file has been created, closed, etc.
You could use strace -f myscript to trace all system calls made by the script, and use grep to filter the system calls that create new files.
You could use the Linux Auditing System. Here is a howto link:
http://www.cyberciti.biz/tips/linux-audit-files-to-see-who-made-changes-to-a-file.html
You can use the script command to track the commands launched.