I want to copy the parameters foo(bar).baz in the following code:
function(foo(bar).baz)
First attempt: Cursor on one of the parentheses, then y%. This gives me the parameters plus a bit extra:
(foo(bar).baz)
Second attempt: Cursor on opening parenthesis. Set a mark ma, jump to end with
% then y`a to copy back to the mark. This gives me:
(foo(bar).baz
Setting a mark at the end and going the other way gives me exactly the same. Setting a
mark on the f, then typing mah%y`a does give me the foo(bar).baz that I want, but maybe there's something more concise. Is there?
Use text objects:
yi( (or ya( if you want to include the parenthesis).
You can also use " to work inside quotes, etc. See the link for details, or type :help text-objects in Vim.
A slightly shorter alternative to yi( is yib. Similarly yiB is equivalent to yi{ - yanks the contents inside braces.
Personally I usually do vib (visual select the text inside braces) first to make sure that the expected text is selected, followed by a y.
For more text object goodness, see :help text-objects.
Following should do it
Yank Inner Block
yi(
Related
suppose I have a variable named
a_variable
is there a surround or some combination of keystrokes which will do
print(a_variable)
or
print("a_variable: ", a_variable)
when my cursor in on the line where a_variable is defined ?
I could not find any relevant material on the web .
Any help is appreciated.
This answers is written with Vim in mind. Some, all, or none of it may apply to your specific Vim emulator so YMMV.
With the surround plugin
First case
You can position your cursor on a_variable and do:
ysiwfprint(<CR>
to obtain:
print(a_variable)
Second case
It is currently impossible to achieve with surround only.
Without surround
First case
You can position your cursor on a_variable and do:
ciwprint(<C-r>")<Esc>
Second case
The scond case is a variant of the first case where you insert the variable name two times instead of one:
ciwprint("<C-r>": ", <C-r>")<Esc>
Turn it into a mapping if you need to do it often.
See :help c, :help iw, :help i_ctrl-r, :help "".
Let's say I have this text:
something "something else"
something here "just another quoted block"
I want to substitute "something else" with "just another quoted block", so I do:
/quot<enter> (to jump to second quoted block searching for the string "quot")
yi" (to yank inner text for current quoted block)
?else<enter> (to jump back to the first quoted block wich contains "else")
vi" (to visually select the quoted block)
p (to paste yanked text)
This works, but I would like to know if the two last steps can be replaced by a single one, to avoid visual mode. I know it's not a huge gain keystroke-wise, but I think that the Vim philosophy would encourage what I'm trying to do, and every time I do this my mind keeps asking for this command. :-P
What I tried so far:
r (replace) replaces just one character
c (change) throws me into Insert mode and does not let me paste the text.
"_di"P
Delete inside quotes to the blackhole register; paste last yanked before cursor.
Or
ci"<Ctrl-R>0<ESC>
Change inside quotes to retrieve last yank; leave insert mode.
With my ReplaceWithRegister plugin, the last two steps would be gri". It also offers grr (replace current / [count] lines); though it only saves a little typing, I find this indispensable.
Key stroke wise, j$yi"k then vi"p is actually probably the fastest. However, if you absolutely must go into insert mode you can j$yi"k then "_ci"<C-r>" or ci"<C-r>0. The :help i_CTRL-R operator allows you to put the contents of a register into insert mode.
I usually try to keep it simple, using what I feel is more intuitive with every day commands:
j
yi"
k
ci"
<ESC>
p
For example if I have some code like:
foo = bar("abc", "def", true, callback);
Is there a nice command to move true to the 1st or 2nd position leaving the commas intact?
P.S as a bonus my friend want to know if this works in Emacs too.
In Vim if you place the cursor at the start of the first word and do dWWP then it will have the desired effect. Here is a breakdown:
dW delete the current word, including the comma and the following whitespace
W move to the start of the next word
P insert the deleted text before the cursor
This will work if there are further parameters after the pair to be swapped - it will need to be modified if there are only two parameters or you want to swap the last two parameters, since it will paste the text after the closing bracket.
Alternatively you could use a regex substitution:
:%s/(\([^,]\+\),\s*\([^,)]\+\)/(\2, \1/
This will find the first two arguments after the open bracket and swap them.
update:
A search of vim.org found the swap parameters plugin, which should do exactly what you want and can handle situations that either of the above methods cannot.
I don't know the answer for vi, but in Emacs, transpose-sexps (C-M-t) will swap two arguments either side of the cursor. Actually transpose-words (M-t) was my first guess, but that leaves the quotes behind.
You need a transpose emacs command. But its limited to not guessing that its transposing in lists, it only considers text (it can't guess the 1st, 2nd word of list). Try this.
Keep your cursor at after comma of true. Use M-x transpose-words. By default it will transpose with next word from the point. Shortcut is M-t.
You can use C-u 2 M-t for transpose with next second word.
Now coming to your question. If you want to move true, to backward 1 word, use C-u -1 M-t, and for backward 2 words C-u -2 M-t.
Am not a VIM guy. So sorry bout that.
If you want to do this as a refactoring, not just as text manipulation, I'd suggest looking into Xrefactory, a refactoring tool for Emacsen (free for C/Java, commercial for C++).
Transposing previous (Ctrl-t p) and next (Ctrl-t n) argument ... add the
following into your .vimrc file:
map <C-t>p ?,\\|(<CR>wd/,\\|)<CR>?,\\|(<CR>"_dw?,\\|(<CR>a, <C-c>?,<CR>P/,<CR>w
map <C-t>n ?,\\|(<CR>wv/,<CR>d"_dw/\\,\\|)<CR>i, <C-r>"<C-c>?,<CR>?,\\|(<CR>w
The % key is one of the best features of vim: it lets you jump from { to }, [ to ], and so on.
However, it does not work by default with quotes: Either " or ', probably because the opening and closing quote are the same character, making implementation more difficult.
Thinking a bit more about the problem, I'm convinced that it should be implemented, by counting if the number of preceding quotes is odd or even and jumping to the previous or next quote, accordingly.
Before I try to implement it myself, I'd just like to know if someone already has?
Depending on your reason for needing this, there may be a better way to accomplish what you're looking for. For example, if you have the following code:
foo(bar, "baz quux")
^
and your cursor happens to be at the ^, and you want to replace everything inside the quotes with something else, use ci". This uses the Vim "text objects" to change (c) everything inside (i) the quotes (") and puts you in insert mode like this:
foo(bar, "")
^
Then you can start typing the replacement text. There are many other text objects that are really useful for this kind of shortcut. Learn (and use) one new Vim command per week, and you'll be an expert in no time!
Greg's answer was very useful but i also like the 'f' and 'F' commands that move the cursor forward and backward to the character you press after the command.
So press f" to move to the next " character and F" to move to the previous one.
I have found this technique very useful for going to the start/end of a very long quoted string.
when cursor is inside the string, visually select the whole string using vi" or vi'
go to start/end of the string by pressing o
press escape to exit visual select mode
this actually takes the cursor next to the start/end quote character, but still feels pretty helpful.
Edit
Adding Stefan's excellent comment here which is a better option for anyone who may miss the comment.
If you use va" (and va') then it will actually visually select the quotes itself as well.
– Stefan van den Akker
I'd like to expand on Greg's answer, and introduce the surround.vim plugin.
Suppose that rather than editing the contents of your quotes, you want to modify the " characters themselves. Lets say you want to change from double-quotes to single-quotes.
foo(bar, "baz quux")
^
The surround plugin allows you to change this to
foo(bar, 'baz quux')
^
just by executing the following: cs"' (which reads: "change the surrounding double-quotes to single-quotes").
You could also delete the quote marks simply by running: ds" (which reads: "delete the surrounding double-quotes).
There is a good introduction to the surround plugin here.
I know this question is old but here is a plugin to use % to match the corresponding double quote:
https://github.com/airblade/vim-matchquote
My previous question seems to be a bit ambiguous, I will rephrase it:
I have a file like this:
copythis abc
replacethis1 xyz
qwerty replacethis2
hasfshd replacethis3 fslfs
And so on...
NOTE: replacethis1, replacethis2, replacethis3, ... could be any words
How do I replace "replacethis1","replacethis2","replacethis3",.. word by "copythis" word by using minimum vim commands.
One way I can do is by these steps:
delete "replacethis1","replacethis2","replacethis3",.. by using 'dw'
copy "copythis" using 'yw'
move cursor to where "replacethis1" was and do 'p'; move cursor to where "replacethis2" was and do 'p' and so on...
Is there a better way to do this in VIM (using less number of vim commands)?
Since you changed your question, I'd do it this way:
Move to the first "replacethis1" and type cw (change word), then type "copythis" manually.
Move to the next "replacethis", hit . (repeat last operation)
Move to the next "replacethis", hit .,
and so on, and so on.
If "copythis" is a small word, I think this is the best solution.
The digit needs to be included, and there could be more than one instance per line:
:%s/replacethis\d/copythis/g
Given that "replacethis[1-3]" can be arbitrary unrelated words, the quickest/simplest way to do this globally would be:
:%s/replacethis1\|replacethis2\|replacethis3/copythis/g
(Note that you need to use \| to get the pipes to function as "or". Otherwise, vim will look for the literal | character.)
I've been struggling with this for a long time too, I think I just worked out the cleanest way:
Use whichever command is cleanest to put copythis into register r:
/copythis
"rye
Then go to the replacement and replace it with the contents of r:
/replacethis
cw<CTRL-R>r<ESC>
Then you can just n.n.n.n.n.n.n. for the rest of them, or if they're wildly different just go to the beginning of each and hit .
The key is replacing and pasting in one step so you can use . later.
:%s/copythis/replacethis/g
To replace all occurrences of copythis with replacethis. Or you can specify a range of line numbers like:
:8,10 s/copythis/replacethis/g
Note, the /g on the end will tell it to replace all occurrences. If you leave that off it will just do the first one.
create this mapping:
:map z cwcopythis^[
( ^[ is the escape character, you can type it in vim using Ctrl+V Ctrl+[ )
go to each word you want to replace and press z
if u need to do essentially the same action multiple times - swap 1st word of one line with second word of the next line, I say you could record a macro and call it whenever you need to
Have you tried string replacement?
%s/replacethis/copythis
A host of other parameters are possible to fine-tune the replacement. Dive into the Vim help for more details. Some more examples here.
You can remap e.g. the m key in normal mode to delete the word under the cursor and paste the buffer: :nnoremap m "_diwP.
Then you can just copy the desired word, move the cursor anywhere onto the to-be-replaced word and type m.
EDIT: Mapping to m is a bad idea since it is used to mark locations. But you can use e.g. ; anyway.