When using Ctrl-E and Ctrl-Y in vim, I would like it to scroll multiple lines instead of one at a time. How would I set up my vimrc to specify the number of lines for just these 2 commands?
You can override the default bindings with counted versions.
noremap <C-e> 2<C-e>
noremap <C-y> 2<C-y>
Use noremap to avoid recursion.
You don't need to do any particular setup. Instead, you can just scroll one page at a time using CTRL+F (forward) or CTRL+B (backwards) as an alternative solution.
This is not exactly what you want, but I hope it helps.
Regarding Ctrl+E and Ctrl+Y, I'm afraid that the only way may be to precede the command with a line count. So, if you want to scroll down five lines, you press 5, then Ctrl+E.
But you can, by default, use Ctrl+D to scroll half a page downwards, and Ctrl+U to scroll half a page upwards, and you can also set how many lines you want to go up or down with the scroll variable.
So, in your .vimrc, add the line set scroll=N, where N is the number of lines you want to scroll with the Ctrl+D and Ctrl+U commands.
So far I've always used xemacs for source code editing (C++), but for several reasons i'd like to switch to or at least try out vim. One of the very basic things is indentation, where I'm super happy with xemacs behaviour. However I have yet to find a solution for having this behaviour in vim.
What I'm talking about is basically the ability to press Tab in any position of a line, and the line will always be indented to the correct level. This means:
1) pressing Tab multiple times will not indent multiple times, instead the text will be (re-)aligned to the indentation level suitable for the current code
2) pressing Tab e.g. in the middle of a word will not insert spaces or a tab in between this word, but rather indent the whole line
Is it possible to achieve this with vim?
Currently I have:
filetype indent plugin on
set cident
set autoindent
set shiftwidth=3
set softtabstop=3
set expandtab
In normal mode, pressing == should fix the indentation of the current line.
You can fix the indentation of several lines by:
selecting them and pressing =,
using a motion, =},
using a text-object, =ip.
In insert mode, you can fix the indentation of the current line with <C-o>== but the insertion point moves as well. You are not supposed to do that kind of thing in insert mode anyway.
After doing :set wrap, Vim wraps lines longer than the window.
But is it possible to have Vim wrap to a new line on blank spaces only, not half-way through a word?
:help wrap
This option changes how text is displayed. It doesn't change the text
in the buffer, see 'textwidth' for that.
When on, lines longer than the width of the window will wrap and
displaying continues on the next line. When off lines will not wrap
and only part of long lines will be displayed. When the cursor is
moved to a part that is not shown, the screen will scroll
horizontally.
The line will be broken in the middle of a word if necessary. See
'linebreak' to get the break at a word boundary.
:help linebreak
If on Vim will wrap long lines at a character in 'breakat' rather
than at the last character that fits on the screen.
:help breakat
'breakat' 'brk' string (default " ^I!#*-+;:,./?")
So, :set linebreak and it should work out of box. Or you can restrict breakat to just break on spaces, instead of spaces+punctuation.
Use
:set linebreak
Or 'lbr' for short. It will break lines on characters included in your 'breakat' option, which includes a space by default.
With vim open, press esc and enter
:set lbr
The following will do a line wrap without breaking any words and preserve the shorter lines.
:set formatoptions+=w
:set tw=80
gggqG
To try and format the current paragraph try the follwoing:
:nnoremap Q gqip
The following commands work for me, and I am using Red Hat 7.x at work, and Cygwin 3.1.4 at home. The exclamation point acts like a not operator.
:set wrap
:set wrap!
Using macvim, when I copy a text selection, it always includes the character under the cursor.
For example, if the cursor is at the far left and I press shift-down arrow, it selects the entire line plus the first character of the next line (since the cursor is sitting over the next line's first character).
Is there a way to configure macvim to not include the cursor character in text selections?
Take a look at the selection option. By default it's set to inclusive, but you can change it to exclusive to make text selections act the way you want:
:set selection=exclusive
You can also set it to exclusive with the behave command:
:behave mswin
This also sets several other options, however, which may or may not be what you want. See the Vim help for the specifics.
:help :behave
:help 'selection'
I am guessing that shift-down arrow activates visual character mode, and moves the cursor down a line. If you are trying to select entire lines, you would be better off using visual line mode, which is activated from normal mode by pressing V (shift-v). This will select the current line in its entirety. You can then extend your selection to include the lines above and below using the k (or up arrow) and j (or down arrow) keys.
When using Vim, I think it is better to go with the grain rather than to fight against it. Don't expect it to work the same way as other text editors. Accept that the Vim way is different.
What are the essential vim commands? What does a new-user need to know to keep themselves from getting into trouble? One command per comment, please.
What I find irreplaceable (because it works in vi also, unlike vim's visual mode) are marks. You can mark various spots with m (lower case) and then a letter of your choice (eg x). Then you go elsewhere, and can go back with ``x(backquote letter) to the exact spot, or with'x` (apostrophe letter) to go to the line.
These movements can be used as arguments to commands (yank, delete, etc). For example, you want to delete 10 lines; instead of counting and then moving to the topmost line and entering 10dd, you go to either the start or the end of the block, press mm (mark m), then go to the other end of the block, and press d'm (delete apostrophe m). If you use backquote instead of apostrophe in this example, then the deletion will work character-wise, not line-wise. Try marking in the middle of the line with "mark m", moving to the middle of another line, then entering "d backquote m" and you will see what I mean.
I was very happy the day I learned about using * or # to search, down or up respectively, for the word under the cursor. Make sure to :set incsearch and :set hlsearch first.
I like this QRC!
http://www.fsckin.com/wp-content/uploads/2007/10/vi-vim_cheat_sheet.gif
When you have some repetitive action to take Macros are usually faster than regex.
Just type
q[0-9a-z] in normal mode
Many people use
qq
because it's fast.
Press
q in normal mode
again to stop recording.
Then just type
#[0-9a-z] in normal mode
to repeat what you just recorded.
#q
for the example like above.
Edited to add: you can also repeat the macro. Let's say you programed a macro to jump to the head of a line, insert a tab, and then jump down one line. You then test your macro by typing "#q" to run it once. Then you can repeat the action nine more times by typing "9#q".
:q -> quit
:w -> save
:q! -> quit and don't save
:x -> save and quit
:[number] -> go to line number
G -> go to end of file
dd -> delete line
p -> "put" line
yy -> "copy" line
:s/[searchfor] -> search
I guess those are the basic one to start from
Use the 'J' (J for Join; upper-case) command to delete the newline at the end of a line. You'll find it tricky otherwise.
This recent Vim tutorial from IBM is pretty good
First of all you need to know how to close vi:
ctrl-c : q!
Rest can be found from vimtutor. Launch vimtutor by typing vimtutor at your command line
Although this is a matter of personal preference I've found that one of the essential things to do is to remap Esc to something else.
I find it very uncomfortable to reach for the Esc key to exit insert mode, but the beautiful thing about Vim is that allows key mappings.
I'm currently using the following mapping using Control + S:
inoremap <C-s> <Esc>:w<CR>
This has the advantage of being a key mapping I have already committed to memory and has the added value of saving my work every time I go to normal mode. Yeah, I know it is crazy but I would be hitting the save command that frequently anyway. It's like a bad habit, you know.
" ~/.vimrc
" Turn on line numbering
set nu
" Turn on syntax highlighting
syntax on
" Set 4 space expanding tabs
set tabstop=4
set shiftwidth=4
set softtabstop=4
set expandtab
"turn off line wrapping
set nowrap
" Map CTRL-N to create a new tab
:map <C-n> <ESC>:tabnew<RETURN>
" Map Tab and CTRL-Tab to move between tabs
:map <Tab> <ESC>:tabn<RETURN>
:map <C-Tab> <ESC>:tabp<RETURN>
If you're using vim, the 'u' command (in command mode) will Undo the last command you typed. You can use this command repeatedly to undo mistakes you may have made before saving the file.
See http://www.rayninfo.co.uk/vimtips.html for a great collection of Vim tips, from the basic can't-live-without to very sophisticated stuff that you might never have thought of trying.
Lots of great commands are listed at the Vim Tips Wiki.
It's also good to run the vimtutor when learning these commands
alias vi nedit :)
all humor aside..
for vi WHEN NOT using nedit..
i (switch to insert mode)
a (append = move to end of line and switch to insert mode)
esc (exit insert mode)
dd delete a line
x delete a character
:wq (save and quit)
/ start a search
n find Next
? search backwards..
yy (yank) copy a line to the buffer
pp (paste) paste it here
r (replace a character)
<N> <command> this is a neat - but aggravating feature that lets you type digits and then a command so
5dd will delete 5 lines
but at this point you might as well
- man vi and refresh your memory
While there are LOTS more, I switched from Vi to nedit several years ago, which I find has more features I can use on a regular basis more easily. Tabbed editing, incremental search bar, column select, copy and paste. sort selected lines, search and destroy within selection, whole doc or all open docs..
tear-off drop down menus..
and it supports syntax highlighting for all the languages I use.. (with pattern files I've used a long time over the years. VIM many now be equivalent, but It has to introduce a feature that Nedit doesn't and an easy way to migrate my pattern files before I switch again.
I like the Vim 5.6 Reference Guide, by Bram Moolenaar and Oleg Raisky.
You can directly print it in booklet form, easy to read, I always have it laying around.
It's a tad old, but what are 8 years in Vi's lifespan ?
:set ignorecase smartcase
Makes searching case-insensitive, unless your search includes a capital letter. Not the most indispensable perhaps, but I find myself setting this option any time I'm editing in a new place. It's in any vimrc file I own.
:%!xxd
View the contents of a buffer in hexadecimal. To revert:
:%!xxd -r
My biggest tip: ctrl+q saves the day when you accidentally hit ctrl+s to save the file you are working on
I have this in my vimrc
set number
set relativenumber
This gives me a line numbering system which makes j, k keys really productive.
I use vi very lightly, and I only use the following commands:
a - switch to insert mode (after the cursor)
esc - return to command mode
:wq - save and quit
:q - quit (no save, only without modification)
:q! - force quit (no save, also with modification)
x - delete one character (in command mode)
dd - delete the whole line (in command mode)
I know there are many many more, but those are enough to get you by.
One of my favourite commands is %G which takes to directly to the end of a file. Especially useful in log-files.
How to switch between modes (i to enter insert mode (one of many ways), esc to exit insert mode, colon for command mode) and how to save and exit. (:wq)
Another useful command is to search something: /
e.g. /Mon will search (and in case of vim highlight) any occurences of Mon in your file.
As a couple of other people have already mentioned, vimtutor is the way to go. It will teach you everything you need to know in vim. The one piece of general advice I would give you is to stay out of insert mode as much as possible. There is enormous power in the other modes, it just takes a little bit of practice to get used to it.
i - insert mode (escape to exit)
dd - delete line
shift-y - 'Yank' (copy) line
p - 'Put' (paste) line(s)
shift-v - Visual mode used to select text (tryin 'yanking' this text and 'putting' it somewhere.
ctrl-w n - create new window (you can open a file or start new file here)
ctrl-w v - split existing window vertically
ctrl-n (in insert mode) - autocomplete (if supported)
:! to run a shell command, usually with standard in as the file or a selection (shift-V)
Useful plugins to look at:
* Buffer Explorer - use \be to view files in the buffer (and select to re-open)
NB vi is not vim! vim is rapidly turning into the emacs of the new century. nvi is probably the closest thing to the original vi. Here's a nice hint: "xp" will exchange two characters (try it).
replace 'foo' with 'bar' everywhere in the file
:%s/foo/bar/gc
The real power is in the searching. Here are the essential commands:
/Steve will find the first instance of "Steve" in the text.
n will find the next "Steve" in the text.
:%s//Stephen/g will replace all those instances of "Steve" you just searched for with "Stephen".
Not to promote myself, but I wrote a blog post on this subject. It focuses on the critical parts of Vim for a beginner.
My favorites:
% find matching bracket/brace
* and # next/previous match
gg top of page
G end of the page
<Ctrl-v> Change to visual mode and select column
<Ctrl-a> increase current number by 1
<Ctrl-x> decrease current number by 1
Running macros