Is there any way to protect a shared library (.so file) against reverse engineering ?
Is there any free tool to do that ?
The obvious first step is to strip the library of all symbols, except the ones required for the published API you provide.
The "standard" disassembly-prevention techniques (such as jumping into the middle of instruction, or encrypting some parts of code and decrypting them on-demand) apply to shared libraries.
Other techniques, e.g. detecting that you are running under debugger and failing, do not really apply (unless you want to drive your end-users completely insane).
Assuming you want your end-users to be able to debug the applications they are developing using your library, obfuscation is a mostly lost cause. Your efforts are really much better spent providing features and support.
Reverse engineering protection comes in many forms, here are just a few:
Detecting reversing environments, such as being run in a debugger or a virtual machine, and aborting. This prevents an analyst from figuring out what is going on. Usually used by malware. A common trick is to run undocumented instructions that behave differently in VMWare than on a real CPU.
Formatting the binary so that it is malformed, e.g. missing ELF sections. You're trying to prevent normal analysis tools from being able to open the file. On Linux, this means doing something that libbfd doesn't understand (but other libraries like capstone may still work).
Randomizing the binary's symbols and code blocks so that they don't look like what a compiler would produce. This makes decompiling (guessing at the original source code) more difficult. Some commercial programs (like games) are deployed with this kind of protection.
Polymorphic code that changes itself on the fly (e.g. decompresses into memory when loaded). The most sophisticated ones are designed for use by malware and are called packers (avoid these unless you want to get flagged by anti-malware tools). There are also academic ones like UPX http://upx.sourceforge.net/ (which provides a tool to undo the UPX'ing).
Related
How can I package my Java application into an executable jar that cannot be decompiled (for example , by Jadclipse)?
You can't. If the JRE can run it, an application can de-compile it.
The best you can hope for is to make it very hard to read (replace all symbols with combinations of 'l' and '1' and 'O' and '0', put in lots of useless code and so on). You'd be surprised how unreadable you can make code, even with a relatively dumb translation tool.
This is called obfuscation and, while not perfect, it's sometimes adequate.
Remember, you can't stop the determined hacker any more than the determined burglar. What you're trying to do is make things very hard for the casual attacker. When presented with the symbols O001l1ll10O, O001llll10O, OO01l1ll10O, O0Ol11ll10O and O001l1ll1OO, and code that doesn't seem to do anything useful, most people will just give up.
First you can't avoid people reverse engineering your code. The JVM bytecode has to be plain to be executed and there are several programs to reverse engineer it (same applies to .NET CLR). You can only make it more and more difficult to raise the barrier (i.e. cost) to see and understand your code.
Usual way is to obfuscate the source with some tool. Classes, methods and fields are renamed throughout the codebase, even with invalid identifiers if you choose to, making the code next to impossible to comprehend. I had good results with JODE in the past. After obfuscating use a decompiler to see what your code looks like...
Next to obfuscation you can encrypt your class files (all but a small starter class) with some method and use a custom class loader to decrypt them. Unfortunately the class loader class can't be encrypted itself, so people might figure out the decryption algorithm by reading the decompiled code of your class loader. But the window to attack your code got smaller. Again this does not prevent people from seeing your code, just makes it harder for the casual attacker.
You could also try to convert the Java application to some windows EXE which would hide the clue that it's Java at all (to some degree) or really compile into machine code, depending on your need of JVM features. (I did not try this.)
GCJ is a free tool that can compile to either bytecode or native code. Keeping in mind, that does sort of defeat the purpose of Java.
A little late I know, but the answer is no.
Even if you write in C and compile to native code, there are dissasemblers / debuggers which will allow people to step through your code. Granted - debugging optimized code without symbolic information is a pain - but it can be done, I've had to do it on occasion.
There are steps that you can take to make this harder - e.g. on windows you can call the IsDebuggerPresent API in a loop to see if somebody is debugging your process, and if yes and it is a release build - terminate the process. Of course a sufficiently determined attacker could intercept your call to IsDebuggerPresent and always return false.
There are a whole variety of techniques that have cropped up - people who want to protect something and people who are out to crack it wide open, it is a veritable arms race! Once you go down this path - you will have to constantly keep updating/upgrading your defenses, there is no stopping.
This not my practical solution but , here i think good collection or resource and tutorials for making it happen to highest level of satisfaction.
A suggestion from this website (oracle community)
(clean way), Obfuscate your code, there are many open source and free
obfuscator tools, here is a simple list of them : [Open source
obfuscators list] .
These tools make your code unreadable( though still you can decompile
it) by changing names. this is the most common way to protect your
code.
2.(Not so clean way) If you have a specific target platform (like windows) or you can have different versions for different platforms,
you can write a sophisticated part of your algorithms in a low level
language like C (which is very hard to decompile and understand) and
use it as a native library in you java application. it is not clean,
because many of us use java for it's cross-platform abilities, and
this method fades that ability.
and this one below a step by step follow :
ProtectYourJavaCode
Enjoy!
Keep your solutions added we need this more.
I am looking to create an AI environment where users can submit their own code for the AI and let them compete. The language could be anything, but something easy to learn like JavaScript or Python is preferred.
Basically I see three options with a couple of variants:
Make my own language, e.g. a JavaScript clone with only very basic features like variables, loops, conditionals, arrays, etc. This is a lot of work if I want to properly implement common language features.
1.1 Take an existing language and strip it to its core. Just remove lots of features from, say, Python until there is nothing left but the above (variables, conditionals, etc.). Still a lot of work, especially if I want to keep up to date with upstream (though I just could also just ignore upstream).
Use a language's built-in features to lock it down. I know from PHP that you can disable functions and searching around, similar solutions seem to exist for Python (with lots and lots of caveats). For this I'd need to have a good understanding of all the language's features and not miss anything.
2.1. Make a preprocessor that rejects code with dangerous stuff (preferably whitelist based). Similar to option 1, except that I only have to implement the parser and not implement all features: the preprocessor has to understand the language so that you can have variables named "eval" but not call the function named "eval". Still a lot of work, but more manageable than option 1.
2.2. Run the code in a very locked-down environment. Chroot, no unnecessary permissions... perhaps in a virtual machine or container. Something in that sense. I'd have to research how to achieve this and how to make it give me the results in a secure way, but that seems doable.
Manually read through all code. Doable on a small scale or with moderators, though still tedious and error-prone (I might miss stuff like if (user.id = 0)).
The way I imagine 2.2 to work is like this: run both AIs in a virtual machine (or something) and constrain it to communicate with the host machine only (no other Internet or LAN access). Both AIs run in a separate machine and communicate with each other (well, with the playing field, and thereby they see each other's positions) through an API running on the host.
Option 2.2 seems the most doable, but also relatively hacky... I let someone's code loose in a virtualized or locked down environment, hoping that that'll keep them in while giving them free game to DoS or break out of the environment. Then again, most other options are not much better.
TL;DR: in essence my question is: how do I let people give me 'logic' for an AI (which I think is most easily done using code) and then run that without compromising the functionality of the system? There must be at least 2 AIs working on the same playing field.
This is really just a plugin system, so researching how others implement plugins is a good starting point. In particular, I'd look at web browsers like Chrome and Safari and their plugin systems.
A common theme in modern plugins systems is process isolation. Ideally you should run the plugin in its own process space in a sandbox. In OS X look at XPC, which is designed explicitly for this problem. On Linux (or more portably), I would probably look at NaCl (Native Client). The JVM is also designed to provide sandboxing, and offers a rich selection of languages. (That said, I don't personally consider the JVM a very strong sandbox. It's had a history of security problems.)
In general, my preference on these kinds of projects is a language-agnostic API. I most often use REST APIs (or "REST-like"). This allows the plugin to be highly restricted, while not restricting the language choice. I like simple HTTP for communications whenever possible because it has rich support in numerous languages, so it puts little restriction on the plugin. In fact, given your description, you wouldn't even have to run the plugin on your hardware (and certainly not on the main server). Making the plugins remote clients removes many potential concerns.
But ultimately, I think something like your "2.2" is the right direction.
I understand the benefits of dynamic linking (old code can take advantage of library upgrades automatically, it's more space efficient), but it definitely has downsides, especially in the heterogeneous Linux ecosystem. It makes it difficult to distribute a distribution-agnostic binary that "just works" and makes a previously working program more likely to break due to a system upgrade that breaks backwards compatibility or introduces regressions into a shared library.
Given these disadvantages, why does dynamic linking seem to be so universally preferred? Why is it so hard to find statically linked, distribution-agnostic Linux binaries, even for small applications?
There are three big reasons:
GNU libc doesn't support static linkage to itself, because it makes extensive internal use of dlopen. (This means that static linkage to anything else is less worthwhile, because you can't get a totally static binary without replacing the C library.)
Distributions don't support static linkage to anything else, because it increases the amount of work they have to do when a library has a security vulnerability.
Distributions have no interest whatsoever in distribution-agnostic binaries. They want to get the source and build it themselves.
You should also keep in mind that the Linux-not-Android software ecology is entirely source-based. If you are shipping binaries and you're not a distribution vendor you are Doing It Wrong.
There are several reasons we prefer dynamic linkage:
Licensing. This is a particular issue with the LGPL, though there are other licenses with similar strictures.
Basically, it's legal for me to send you a binary built against LGPL libfoo.so.*, and even to give you a binary for that library. I have a various responsibilities, such as responding to requests for the source for the LGPL'd library, but the important thing here is that I don't have to give you the source for my program, too. Since glibc is LGPL and almost every binary on a Linux box is linked to it, that alone will force dynamic linkage by default.
Bandwidth costs. People like to say bandwidth is free, but that's true only in principle. In many practical cases, bandwidth still matters.
My company's main C++-based system packs up into a ~4 MB RPM, which takes a few minutes to upload over the slow DSL uplinks at most of our customers' sites. We still have some customers only accessible via modem, too, and for those an upload is a matter of "start it, then go to lunch." If we were shipping static binaries, these packages would be much larger. Our system is composed of several cooperating programs, most of which are linked to the same set of dynamic libraries, so the RPM would contain redundant copies of the same shared code. Compression can squeeze some of that out, but why keep shipping it again and again for each upgrade?
Management. Many of the libraries we link against are part of the OS distro, so we get free updates to those libraries independent from our program. We don't have to manage it.
We do separately ship some libraries which aren't part of the OS, but they have to change much less often than our code does. Typically, these are installed on the system when we build the server, then never updated again. This is because we are most often more interested in stability than new features from these libraries. As long as they're working, we don't touch them.
Is it possible to modify a shared library (.so) in Linux without getting its source code???
I know about LD_PRELOAD, but is that useful for functions that are used IN the shared library itself???
Is there a way to decompile/disassemble and then recompile/reassemble binary ELF files?
Modifying applications is difficult to get right even with all the available documentation, code and support. Attempting to modify an application in binary form, (presumably) with no debug symbols, without documentation (judging by the fact you don't have the code) is therefore a much more arduous and risky undertaking.
Application reverse engineering is difficult, but can be done given enough resources, determination, tools and knowledge: all of this hinges on having a sufficiently valuable goal.
I have been looking into MeeGo, maemo, Android architecture.
They all have Linux Kernel, build some libraries on it, then build middle layer libraries [e.g telephony, media etc...].
Suppose i wana build my own system, say Linux Kernel, with some binariers like glibc, Dbus,.... UI toolkit like GTK+ and its binaries.
I want to compile every project from source to customize my own linux system for desktop, netbook and handheld devices. [starting from netbook first :)]
How can i build my own customize system from kernel to UI.
I apologize in advance for a very long winded answer to what you thought would be a very simple question. Unfortunately, piecing together an entire operating system from many different bits in a coherent and unified manner is not exactly a trivial task. I'm currently working on my own Xen based distribution, I'll share my experience thus far (beyond Linux From Scratch):
1 - Decide on a scope and stick to it
If you have any hope of actually completing this project, you need write an explanation of what your new OS will be and do once its completed in a single paragraph. Print that out and tape it to your wall, directly in front of you. Read it, chant it, practice saying it backwards and whatever else may help you to keep it directly in front of any urge to succumb to feature creep.
2 - Decide on a package manager
This may be the single most important decision that you will make. You need to decide how you will maintain your operating system in regards to updates and new releases, even if you are the only subscriber. Anyone, including you who uses the new OS will surely find a need to install something that was not included in the base distribution. Even if you are pushing out an OS to power a kiosk, its critical for all deployments to keep themselves up to date in a sane and consistent manner.
I ended up going with apt-rpm because it offered the flexibility of the popular .rpm package format while leveraging apt's known sanity when it comes to dependencies. You may prefer using yum, apt with .deb packages, slackware style .tgz packages or your own format.
Decide on this quickly, because its going to dictate how you structure your build. Keep track of dependencies in each component so that its easy to roll packages later.
3 - Re-read your scope then configure your kernel
Avoid the kitchen sink syndrome when making a kernel. Look at what you want to accomplish and then decide what the kernel has to support. You will probably want full gadget support, compatibility with file systems from other popular operating systems, security hooks appropriate for people who do a lot of browsing, etc. You don't need to support crazy RAID configurations, advanced netfilter targets and minixfs, but wifi better work. You don't need 10GBE or infiniband support. Go through the kernel configuration carefully. If you can't justify including a module by its potential use, don't check it.
Avoid pulling in out of tree patches unless you absolutely need them. From time to time, people come up with new scheduling algorithms, experimental file systems, etc. It is very, very difficult to maintain a kernel that consumes from anything else but mainline.
There are exceptions, of course. If going out of tree is the only way to meet one of your goals stated in your scope. Just remain conscious of how much additional work you'll be making for yourself in the future.
4 - Re-read your scope then select your base userland
At the very minimum, you'll need a shell, the core utilities and an editor that works without an window manager. Paying attention to dependencies will tell you that you also need a C library and whatever else is needed to make the base commands work. As Eli answered, Linux From Scratch is a good resource to check. I also strongly suggest looking at the LSB (Linux standard base), this is a specification that lists common packages and components that are 'expected' to be included with any distribution. Don't follow the LSB as a standard, compare its suggestions against your scope. If the purpose of your OS does not necessitate inclusion of something and nothing you install will depend on it, don't include it.
5 - Re-read your scope and decide on a window system
Again, referring to the everything including the kitchen sink syndrome, try and resist the urge to just slap a stock install of KDE or GNOME on top of your base OS and call it done. Another common pitfall is to install a full blown version of either and work backwards by removing things that aren't needed. For the sake of sane dependencies, its really better to work on this from bottom up rather than top down.
Decide quickly on the UI toolkit that your distribution is going to favor and get it (with supporting libraries) in place. Define consistency in UIs quickly and stick to it. Nothing is more annoying than having 10 windows open that behave completely differently as far as controls go. When I see this, I diagnose the OS with multiple personality disorder and want to medicate its developer. There was just an uproar regarding Ubuntu moving window controls around, and they were doing it consistently .. the inconsistency was the behavior changing between versions. People get very upset if they can't immediately find a button or have to increase their mouse mileage.
6 - Re-read your scope and pick your applications
Avoid kitchen sink syndrome here as well. Choose your applications not only based on your scope and their popularity, but how easy they will be for you to maintain. Its very likely that you will be applying your own patches to them (even simple ones like messengers updating a blinking light on the toolbar).
Its important to keep every architecture that you want to support in mind as you select what you want to include. For instance, if Valgrind is your best friend, be aware that you won't be able to use it to debug issues on certain ARM platforms.
Pretend you are a company and will be an employee there. Does your company pass the Joel test? Consider a continuous integration system like Hudson, as well. It will save you lots of hair pulling as you progress.
As you begin unifying all of these components, you'll naturally be establishing your own SDK. Document it as you go, avoid breaking it on a whim (refer to your scope, always). Its perfectly acceptable to just let linux be linux, which turns your SDK more into formal guidelines than anything else.
In my case, I'm rather fortunate to be working on something that is designed strictly as a server OS. I don't have to deal with desktop caveats and I don't envy anyone who does.
7 - Additional suggestions
These are in random order, but noting them might save you some time:
Maintain patch sets to every line of upstream code that you modify, in numbered sequence. An example might be 00-make-bash-clairvoyant.patch, this allows you to maintain patches instead of entire forked repositories of upstream code. You'll thank yourself for this later.
If a component has a testing suite, make sure you add tests for anything that you introduce. Its easy to just say "great, it works!" and leave it at that, keep in mind that you'll likely be adding even more later, which may break what you added previously.
Use whatever version control system is in use by the authors when pulling in upstream code. This makes merging of new code much, much simpler and shaves hours off of re-basing your patches.
Even if you think upstream authors won't be interested in your changes, at least alert them to the fact that they exist. Coordination is essential, even if you simply learn that a feature you just put in is already in planning and will be implemented differently in the future.
You may be convinced that you will be the only person to ever use your OS. Design it as though millions will use it, you never know. This kind of thinking helps avoid kludges.
Don't pull upstream alpha code, no matter what the temptation may be. Red Hat tried that, it did not work out well. Stick to stable releases unless you are pulling in bug fixes. Major bug fixes usually result in upstream releases, so make sure you watch and coordinate.
Remember that it's supposed to be fun.
Finally, realize that rolling an entire from-scratch distribution is exponentially more complex than forking an existing distribution and simply adding whatever you feel that it lacks. You need to reward yourself often by booting your OS and actually using it productively. If you get too frustrated, consistently confused or find yourself putting off work on it, consider making a lightweight fork of Debian or Ubuntu. You can then go back and duplicate it entirely from scratch. Its no different than prototyping an application in a simpler / rapid language first before writing it for real in something more difficult. If you want to go this route (first), gNewSense offers utilities to fork your own OS directly from Ubuntu. Note, by default, their utilities will strip any non free bits (including binary kernel blobs) from the resulting distro.
I strongly suggest going the completely from scratch route (first) because the experience that you will gain is far greater than making yet another fork. However, its also important that you actually complete your project. Best is subjective, do what works for you.
Good luck on your project, see you on distrowatch.
Check out Linux From Scratch:
Linux From Scratch (LFS) is a project
that provides you with step-by-step
instructions for building your own
customized Linux system entirely from
source.
Use Gentoo Linux. It is a compile from source distribution, very customizable. I like it a lot.