How can I combine/split properties with AutoMapper? - automapper

we're using Automapper (http://automapper.codeplex.com/) to map between entities and dto's. We have a situation where one property on an entity corresponds to three different properties on the dto, and we need to write some custom logic to do the mapping. Anyone know how we can do that? (We need to map both ways, from entity and from dto).
I notice that AutoMapper supports custom resolvers to do custom mapping logic, but as far as I can tell from the documentation, they only allow you to map a single property to another single property.
Thx

You can create a custom type converter. It allows you to define a converter for an entire type, not just a single property.

Related

Using Automapper while using specification pattern to compose objects

A specification pattern can be used to compose objects as shown in the example below:
IUser user =
UserSpecification
.ForPerson()
.WithName("myname")
.WithSurname("mysurname")
.WithPrimaryContact(ContactSpecification.ForEmailAddress("abc#email.com"))
.AndNoMoreContacts()
.Build();
This leads to manually map the data from DTO to the specification object.
Is there a way, we can use automapper to fill object while using specification pattern? Does Automapper support this in any way?
Thanks
I don't think so, typically the specification pattern is used for piecemeal setting of individual properties. The implementation of the pattern involves for each method actually setting a property, by hand.
AutoMapper always maps from an object, in the above, I don't see a source object, just a specification. If the specification filled an object, then that object was mapped to the destination, then it would work. The result above from "Build()" could be mapped to "IUser".
Otherwise, it doesn't make much sense. The code inside a specification pattern is setting up an object, and trying to map this to AutoMapper configuration I think would be far more trouble/confusing than it would be worth.

JAXB how to remove anything from JDefinedClass

i am using jaxb to generate code from an xsd.
The generated code contains a lot of annotations; for classes and fields.
I am trying to use com.sun.tools.internal.xjc.Plugin to modify the generated code.
In the plugin run() method we are given an Outline class from which we can get ClassOutline. ClassOutline has an JDefinedClass final member which has the info about actual class which will be generated.
If i want to add anything, there are apis in JDefinedClass which can be used. But if i want to remove something, there is no way.
e.g. i cannot clear annotations, because the JDefinedClass.annotations() method returns an UnmodifiableCollection. so i cannot clear it or remove anything from it.
i tried to create another JDefinedClass by invoking the _class method but the ClassOutline.implClass variable is final, so i cannot set it.
how to get a JDefinedClass which does not have any annotations?
is there another phase of code generation which i can trap into to really control the generation of JDefinedClass?
The code model is, indeed mostly "write only". But, speaking of annotations, you have probably missed the methods like com.sun.codemodel.JDefinedClass.removeAnnotation(JAnnotationUse) and com.sun.codemodel.JMethod.removeAnnotation(JAnnotationUse) (implemented from com.sun.codemodel.JAnnotatable.removeAnnotation(JAnnotationUse)).
So they're there. You can remove annotations with the normal CodeModel API.
As I can see, you can also remove fields and methods from classes. So what exactly are you missing?
JDefinedClass.annotations() It return an unmodifiable collection object and you cannot modify them.
So work around for this, you can restrict annotation addition/deletion at class and field level before building JCodeModel.
You need to create a custom Jackson2Annotator class which extends Jackson2Annotator and override their methods according to your requirement.
Following are few methods which are being used for specific type of annotation property:
propertyOrder(OTB JsonPropertyOrder)
propertyInclusion(OTB JsonInclude)
propertyField(can be used for custom defined annotation at field level)
More you can discover by looking Jackson2Annotator class what fit into your need.

How to use Automapper to map multiple DataTables to an object

I've used Automapper before to map DataTable objects to a DTO object like this:
AutoMapper.CreateMap<IDataReader, MyDTO>();
Now I've run into a case where I have three DataTable objects that map to one DTO object. I can't use the simple case above because I have three sources with the same type.
Is there a way to specify some additional information, like the table name, to determine the correct mapping?

How to access certain EStructuralFeatures of an EMF Model?

I know that there are ways to access an EAttribute of an Eclipse EMF model by its featureID or by its name via different indirect approaches. For that I found the following: Eclipse EMF: How to get access EAttribute by name?
But what if I don't know the name of the attribute I want to get? Let's say, based on the design, the model has some fixed attributes by the developer, along with the features that can be set dynamically by the user.
So, for the time being I use the getEAllStructuralFeatures() and use indexes via get() to reach to the by-the-user-created attributes, since I know that the list I get will have the fixed attributes of the model as its first elements beginning with the index 0. But I find this solution unclear and inefficient. Also in some cases, that I want to work, not suitable.
E.g: IEMFEditProperty prop = EMFEditProperties.list(editingDomain, EMFMODELPackage.Literals.EMFMODEL.getEAllStructuralFeatures().get(X));
Do you know a solution or a workaround for this problem? As far as I can see, there are no direct methods to get such dynamically created features of the model.
Every help will be appreciated.
I have been working on a similar case recently where I first tried to define an EStructuralFeature to access exactly the setting/attribute of the object that I needed.
But if you look at how things work internally in ECore, you will find out, that there is no way this will ever work, since the indices are bound to the object identity of the EStructuralFeature objects created at runtime for the specific context (i.e. EClass instance).
My approach was then to either inspect the features proposed by EClass.getEAllStructuralFeatures or to iterate over the features and inspect the object returned by EObject.eGet for this very feature (where EClass eClass = eObject.eClass()).
Example: In a UML profile I have defined a UML Stereotype called "Bean" with a property called FactoryEntity. The property shall reference a UML Class with the Stereotype "Entity" that is closest to this very bean and for which a static factory method will be generated.
In the model I would then have one UML Class typed as Bean and one as Entity.
And for the Class typed as "Bean" I would then set a value for the attribute/property factoryEntity defined in the profile.
The question was then how the property value would be accessible in ECore. I ended up iterating the List of available EStructuralFeature of the EClass of the EObject and checking the type of the object returned by eGet.
final EObject eObject = (EObject) holdingClass.getValue(stereotype, stereoTypePropertyName);
final EList<EStructuralFeature> allEStructFeats = eObject.eClass().getEAllStructuralFeatures();
for(EStructuralFeature esf : allEStructFeats)
{
final Object o = eobject.eGet(esf);
if(o instanceof org.eclipse.uml2.uml.Class)
{
return (org.eclipse.uml2.uml.Class) o;
}
}
Maybe that is not the most elegant way to access structural features but it is the only one I thought was robust enough to last.
Please let me know if you have any suggestions on how to improve this.

Can we get declared properties of a Groovy class by its order?

I created a plain Groovy class (i.e Person class)with some properties. Now I want to get those declared attributes (which I've defined in my class) with their order, but I don't know how to do it.
I've tried to use Person.metaClass.getProperties() but it retrieves not only declared properties but also built-in Groovy ones.
Could you please help me on this: just get declared properties by its order when declaring.
Thank you so much!
I can't see a use case, but the compiler could reorder all fields declaration while creating bytecode. I'm pretty sure ordering is not a constraint on fields though it should mostly be the case for not modified/enhanced class
As per the JVM spec, generated fields should be marked SYNTHETIC (like generated methods) in the bytecode, so you can test with :
Person.getDeclaredFields().grep { !it.synthetic }
and filter the base Groovy fields like ClassInfo,metaClass and others beginning by __timestamp
But I'm not a specialist, there could be another way I don't think of
There was a question about this on the mailing list back in February of this year
The answer is, no. There is no way to get properties in the order they are declared in the class without doing some extra work.
You could parse the source file for the class, and generate an ordered list of property names from that
You could write a custom annotation, and annotate the fields with this annotation ie: #Order(1) String prop
You could make all of the classes where this matters implement an interface which forces them to have a method that returns the names of the properties in order.
Other than that, you probably want to have a re-think :-(

Resources