I'm creating a report that outputs a letter. The first page contains is a large left margin containing static company information. The letter output can be multiple pages, however I only want the text on the first page indented to the right away from the left margin. How can I accomplish this with one text field (the letter body is all one data field)?
Example: http://i.stack.imgur.com/E6SGr.jpg
Right-click on your text field and select 'Size & Position'. Here you can set the X and Y positions of the field, and the X value can be set conditionally. All you have to do is something like:
if pagenumber=1 then 0 else 1440
Watch out, though, the units used in the formula are twips, not the units listed as your default in the Size & Position window. FYI, 1440 twips to an inch or 20 twips to a point.
Related
I have a varying number of rows of text which I paste into excel like those two below. The content will vary slightly but the overall structure will stay the same:
Now I need to split these up and would therefore like a macro which searches for the word "maturity" and selects this word and all the text on the right side of the word and moves it one cell to the right.
I tried splitting it up via text to row, but the position of the word varies and splitting it up via space or comma destroys the rest of the data.
example:
1/ Worst Of Put K UN, WS UQ, XYZ YX maturity 22May2019, 80% strike, size q€7M (€ quanto), BID
2/ Worst Of Put xyz xy, TSLA UQ, KK BK maturity 20Nov2021, 100% strike, size €3.5M (€ quanto), BID
the macro should keep "2/ Worst Of Put xyz xy, TSLA UQ, KK BK" in one cell and move "maturity 20Nov2021, 100% strike, size €3.5M (€ quanto), BID" one cell to the right.
Many thanks for the help,
Ragnar
Step 1) Do a Find/Replace on your data. Find maturity, replace with ~maturity. [Note: This assumes you won't have ~ anywhere in the strings. Use another character if you have ~ somewhere.]
Step 2) Highlight your data, go to Text to Columns, and split on a delimiter ~
I have a strange problem with the SSRS-Excel Renderer:
As soon as I create a Table, it can be empty, with more than one Column, at the most right column, an empty Excel-Column shows up:
In the example, I just putted a plain Table into the RDLC, added the hardcoded values 1 to 4, and you can see, there is the 'C`Column pretty small, but without any values anywhere in it.
As per my understanding this is possible only if Report width is greater than tablix width,
Just Make sure you have same width for both Report & Tablix, Report width is in pt but tablix Size.width in inch.. so use any conversion and set same width for both.
Roughly 1 inch= 72 pt
I am producing a VBA subroutine in an Access database which generates an Excel File however when I modify the column widths using:
Range("A:A").ColumnWidth = ...
Produces mixed results depending on the unit of measurement. Excel's default measurement set in options is Centimeters. I have tried entering the value in points and in cm but the result is either too wide or too small (see below):
Range("A:A").ColumnWidth = 3.07 'In Centimeters - Too small
Range("A:A").ColumnWidth = 87.02 'In Points - Too big
According to the documentation
Range.ColumnWidth
is set using the measurement in the points unit of measurement (width of 0). Regardless of the value I enter the result isn't the same.
The .ColumnWidth property refers to the number of zeros you can type in a cell in the default font without exceeding the cell's width.
In a new workbook where presumably your default column width is 8.43, type '000000000 in a cell and you'll see that the 9th zero overflows the right cell border by about half a zero.
To set the cell width in points, set .ColumnWidth to points / cell.Width * cell.ColumnWidth. Here's the catch, you have to set it three times to get it close, but it will almost never be exact. So put the .ColumnWidth assignment in a For Next loop and set it three times.
Note that the .Width property is in points and you can't set it. The .ColumnWidth property is in crazy-zero-width-measurement and you can set it. Why it takes three times, I don't know.
See http://dailydoseofexcel.com/archives/2004/06/01/column-widths-in-points/ for some test results on the 'three times' thing.
The data set I have is for example and the actual data will have upwards of 100 people. I need to retrieve the top 10 scores from each category in the picture below:
I think the answer is really quite simple.
In each of the corresponding cells, use the "large" forumla.
In cell for vertical 1 it would read large(column vertical, 1) - Returning the largest value in the set.
In cell for vertical 2 it would reage large(colum vertical, 2) - Returning the 2nd largest value in the set.
I have what I hope is a simple question !
I am generating a simple RTF table that is subsequently opened in MS Word. The table is generating fine but the column widths are a little small and causing some word wrapping (not what I want).
The RTF code I generate is for a two line, three column table and is of the form:
\trowd \trautofit1
\intbl
\cellx1
\cellx2
\cellx3
{a\cell b\cell c\cell }{\trowd \trautofit1
\intbl
\cellx1
\cellx2
\cellx3
\row}
\trowd \trautofit1
\intbl
\cellx1
\cellx2
\cellx3
{d\cell e\cell f\cell }{\trowd \trautofit1
\intbl
\cellx1
\cellx2
\cellx3
\row}
What do I need to add to set a column width ? I have tried altering the column width in word and then examining the output but it is a little obscure to say the least !
The control words you are looking for are \clwWidthN and \clftsWidthN
Microsoft RTF Specification v1.9.1:
- \clwWidthN
Preferred cell width. Overrides \trautofitN.
- \clftsWidthN
Units for \clwWidthN:
- 0 : Null. Ignore \clwWidthN in favor of \cellxN (Word 97 style of determining cell and row width).
- 1 : Auto, no preferred cell width, ignores \clwWidthN if present; \clwWidthN will generally not be written, giving precedence to row defaults.
- 2 : Percentage (in 50ths of a percent).
- 3 : Twips.
So, in your case, you could just use \clftsWidth1 (automatically set width) or set the preferred percentages yourself e.g. \clwWidth2\clwWidth2500 (2500 = 50%)
Auto width
\trowd \trautofit1
\intbl
\clftsWidth1\cellx1
\clftsWidth1\cellx2
\clftsWidth1\cellx3
{a\cell b\cell c\cell }
40% - 30% - 30%
\trowd \trautofit1
\intbl
\clftsWidth2\clwWidth2000\cellx1
\clftsWidth2\clwWidth1500\cellx2
\clftsWidth2\clwWidth1500\cellx3
{a\cell b\cell c\cell }
The problem is in that you have set very small width for column:
\cellx1
\cellx2
\cellx3
To set width for column in RTF there is a keyword '\cellxN', where N - is column width in twips.
15 twips is 1px.
So if you want to create a simple RTF table with 1 row and 3 columns, 100px each, use this syntax:
\trowd\cellx1500\cellx3000\cellx4500
\intbl A\cell B\cell C\cell\row
You will get a simple table by 300px, 3 columns - 100px each, with invisible borders.
Cheers,
Max
You need to either use cellx0, so that autofit tag applies, or explicity set the number to the number of twips from the left border. In your example, you use 1 2 and 3 which is explicity setting the column widths to be very skinny. For example, something like:
\cellx5125
\Cellx6000
\Cellx8000
Note that these numbers are offsets from the left margin.
If you are going to do any RTF, I highly recomend the RTF Pocket Guide from O'Rielly
Check this link
http://joseluisbz.wordpress.com/2014/04/26/working-rtf-html-css-and-script-files-with-my-own-packages-java-and-php/
you can to make your own file.
TblData = new RTFTable(4,4); //4 Columns, 4 Rows
TblData.setWideCols(1000); //Width of 2000 to put all columns
TblData.setWideCol(0,3000); //Width of 3000 to Column 0