I am currently scanning an entire directory, copying an exe over and running it in each folder. This exe converts certain log files within each folder. However, half the directories don't contain any log files and it seems like a waste to move into each of those folders and run an exe that does nothing. An example of some folder names:
0075D-S10
0075D-S10-EVT
0132C-S10
0132C-S10-EVT
and so on...
I basically only need to copy the executable into the folders that don't contain EVT in the name. These just contain evtx files that aren't important to me at the moment.
Here is a snippet of my batch file and what it is doing:
set back=%cd%
set current_dir=%cd%
setlocal EnableDelayedExpansion
for /d %%i in ("%current_dir%\*") do (
copy LogCsv.exe "%%i" >NULL
cd "%%i"
LogCsv.exe
)
cd %back%
Really my first time just using Batch files and I've been exploring answers on here, but couldn't find a solution to this particular problem. How can I loop this directory, excluding any folders containing the "EVT" string in their name?
Thanks for taking time to assist!
Well, you can use findstr /v to exclude certain values from search results.
#echo off
set back=%cd%
set current_dir=%cd%
for /f %%i in ('dir /b /ad %current_dir%\* ^| findstr /v EVT') do (
copy LogCsv.exe "%%i" >NUL
cd "%%i"
LogCsv.exe
cd %back%
)
Also note, you need to pipe to nul not null
Okay, Windows 7 Enterprise x64 here with a Windows batch file question. I am a somewhat basic user with little knowledge of batch file creation. I've modified existing scripts I've found online to my use, that is about it.
I have a piece of software that dumps it's output to a folder with file names concatenated from the project title, current system date, current system time, and project settings.
It will export two files in this format every time the project is saved:
PROJECTTITLE_2016_10_07__09_45_11__A_B_C.iges
PROJECTTITLE_2016_10_07__09_45_11__A_B_C.step
The A, B, and C representing switches used in the software that are specific to the project. These may exist or may not exist as in the file name can be _R_F or _R_F_Z etc.
"PROJECTTITLE" can literally be anything. This is where my problem arises using delimiters. You could potentially have file names like all of the following (using real examples from users):
11475shacklebody_2016_10_07__09_45_11__R_F.iges
11475shacklebody_2016_10_07__09_45_11__R_F.step
test_EFMflow_2016_10_07__09_45_11__R_Z.iges
test_EFMflow_2016_10_07__09_45_11__R_Z.step
untitled16_2016_10_07__09_45_11__R.iges
untitled16_2016_10_07__09_45_11__R.step
#14drop_wire-edm_2016_10_07__09_45_11__R_F_Z.iges
#14drop_wire-edm_2016_10_07__09_45_11__R_F_Z.step
prooftestwithoutupperlandsimproved-4_2016_10_07__09_45_11.iges
prooftestwithoutupperlandsimproved-4_2016_10_07__09_45_11.step
What I want to do is move both the IGES and STEP files from the output folder on the C drive to a new folder on a networked drive with name based on "PROJECTTITLE," creating that folder if needed. I have already task scheduled a -delim based batch to run every night, but found delimiters to not be sufficient for my use.
While it seems like an easy job to do with delimiters, looking for the first underscore, I have had projects with underscores in their names that screws up the folder naming. Since delimiters only work for individual characters, not strings, I have been looking for examples of batch files I can adapt to my use with no luck finding any similar to what I want to do that do not use delimiters.
It seems simple, search for string "_2016," in filename, and take all characters before "_2016" and create a new directory, placing files containing those characters in that folder. I am lost as to how to do this without delimiters though.
What I have working so far, using delimiters looking for underscores, creating folders and moving to those folders on a mapped drive:
for /f "delims=_" %%V in ('dir /b /a-d C:\Output\*_*.iges') do (
mkdir "I:\ENG\PARTS\%%V" 2>nul
move "C:\Output\%%V_*.iges" "I:\ENG\PARTS\%%V" >NUL 2>nul
move "C:\Output\%%V_*.step" "I:\ENG\PARTS\%%V" >NUL 2>nul
)
It is a very simple batch file for what it does, but falls flat on it's face with titles containing underscores.
A few things:
Searching for _2016 would mean the batch file would need yearly maintenance. Could we either search for system %YEAR% or somehow search for "_####_##_##_" with something like a regular expression to get away from searching for system date or a specific year?
EDIT:
While not ideal as the switches are useful, I found a way in the software to not export the project specific switches at the end of the file name. So now the export would be:
PROJECTTITLE_2016_10_07__09_45_11.iges
PROJECTTITLE_2016_10_07__09_45_11.step
Which I know I can trim from right, what, 21 characters, use that name to make a folder and search the directory for all files containing that trimmed string.
It still would be nice to figure out how to search for the specific string though with the switches intact. I am willing to learn, so throw all explanations of your code you can at me.
Double (Late) EDIT:
First, thank you all for answering this, I deeply appreciate your help.
Double underscores in the the filename are quite rare, but do happen, probably due to typos. It becomes more of an issue with the volume of files I'm planning to move with this. The software runs on maybe 100 user machines with 20 or so being heavy users, each saving up to maybe 1000 files a day. The software will automatically save in increments, as the user runs the simulation. I'm trying to give them a way to collaborate and view each other's simulation results over the network (that we actively encourage them to use) and it figures that the software is hard coded to output to the C drive (for "performance" as the vendor tells me). I'm looking into scheduling the files to move every 15 minutes on every PC in their OU instead of nightly to give a near-real-time view on what they are working on.
Another option I explored was symbolically linking the output folder on each machine to the software's folder network drive, but found that this really doesn't solve the user's "organization" issue, putting like project runs in the same folder. This also has the issue of not allowing them to save a project out of the office without VPN, which some users do do, then move their files over when they get back in the office.
Thank you for your assistance.
Next batch script should do the job even if a file name contains cmd poisonous characters like space or % percent sign etc.
#ECHO OFF
SETLOCAL EnableExtensions DisableDelayedExpansion
set "_fouts=C:\Output" your setting
set "_fouts=D:\test\39924063" my setting
for /F %%G in ('wmic OS get localdatetime ^|find "."') do set "_fyear=%%G"
pushd "%_fouts%"
set "_fyear=%_fyear:~0,4%"
call :doDir
set /A _fyear -= 1
call :doDir
popd
ENDLOCAL
goto :eof
:doDir
rem debugging output echo(%_fyear%
for /f "delims=" %%V in ('
dir /b /a-d "*_%_fyear%_*.iges" "*_%_fyear%_*.step" 2^>NUL') do (
set "_fname=%%~nV" filename without extesion
set "_fexte=%%~xV" extesion only
call :doAll
)
goto :eof
:doAll
call set "_ftail=%%_fname:*_%_fyear%_=%%"
call set "_fproj=%%_fname:_%_fyear%_%_ftail%=%%"
rem debugging output echo("%_fproj%" "%_fname%" "%_fexte%"
ECHO mkdir "I:\ENG\PARTS\%_fproj%" 2>nul
ECHO move "%_fname%%_fexte%" "I:\ENG\PARTS\%_fproj%\"
goto :eof
Output (note that operational mkdir and move commands are merely displayed for debugging purposes using ECHO mkdir and ECHO move, respectively):
==> dir /B /S "D:\test\39924063" /S
D:\test\39924063\#14drop_wire-edm_2016_10_07__09_45_11__R_F_Z.iges
D:\test\39924063\#14drop_wire-edm_2016_10_07__09_45_11__R_F_Z.step
D:\test\39924063\%PROJECT TITLE_2016_10_07__09_45_11__A_B_C.iges
D:\test\39924063\%PROJECT TITLE_2016_10_07__09_45_11__A_B_C.step
==> D:\bat\SO\39924063.bat
mkdir "I:\ENG\PARTS\#14drop_wire-edm"
move "#14drop_wire-edm_2016_10_07__09_45_11__R_F_Z.iges" "I:\ENG\PARTS\#14drop_wire-edm\"
mkdir "I:\ENG\PARTS\%PROJECT TITLE"
move "%PROJECT TITLE_2016_10_07__09_45_11__A_B_C.iges" "I:\ENG\PARTS\%PROJECT TITLE\"
mkdir "I:\ENG\PARTS\#14drop_wire-edm"
move "#14drop_wire-edm_2016_10_07__09_45_11__R_F_Z.step" "I:\ENG\PARTS\#14drop_wire-edm\"
mkdir "I:\ENG\PARTS\%PROJECT TITLE"
move "%PROJECT TITLE_2016_10_07__09_45_11__A_B_C.step" "I:\ENG\PARTS\%PROJECT TITLE\"
==>
Resources (required reading, incomplete):
(command reference) An A-Z Index of the Windows CMD command line
(additional particularities) Windows CMD Shell Command Line Syntax
(%~nV, %~xV etc. special page) Command Line arguments (Parameters)
(set "_fyear=%_fyear:~0,4%" etc.) Extract part of a variable (substring)
(%variable:StrToFind=NewStr% etc.) Variable Edit/Replace
#ECHO OFF
SETLOCAL
SET "sourcedir=U:\sourcedir"
SET "destdir=U:\destdir"
REM (
FOR /f "delims=" %%a IN (
'dir /b /a-d "%sourcedir%\*__*" '
) DO (
IF /i "%%~xa"==".iges" CALL :process "%%a"
IF /i "%%~xa"==".step" CALL :process "%%a"
)
REM )>"%outfile%"
GOTO :EOF
:: Process filename "%1"
:process
SET "fullname=%~1"
SET "junk=%fullname:*__=%"
CALL SET "project=%%fullname:%junk%=%%"
SET "project=%project:~0,-13%
ECHO(MD "%destdir%\%project%"
ECHO(MOVE "%sourcedir%\%~1" "%destdir%\%project%\"
GOTO :eof
You would need to change the settings of sourcedir and destdir to suit your circumstances.
The required MD commands are merely ECHOed for testing purposes. After you've verified that the commands are correct, change ECHO(MD to MD to actually create the directories. Append 2>nul to suppress error messages (eg. when the directory already exists)
The required MOVE commands are merely ECHOed for testing purposes. After you've verified that the commands are correct, change ECHO(MOVE to MOVE to actually move the files. Append >nul to suppress report messages (eg. 1 file moved)
This approach simply performs a directory list without directorynames (/a-d) of each file in the source directory that contains a double-underscore. Each filename matching is assigned to %%a and if the extension part (%%~xa) is one of the targets, then process the filename.
Processing consists of removing all of the characters before the double-underscore and then removing that junk part from the full name, giving project+date. Remove the last 13 characters and you have your project name.
Will have problems with any filename containing certain symbols like % or = but should be fine with underscores.
This version assumes there will not be an instance of _YYYY_ in the PROJECTTITLE.
#Echo Off
SetLocal EnableExtensions DisableDelayedExpansion
(Set OutDir=I:\ENG\PARTS)
(Set SrcDir=C:\Output)
If Not Exist "%SrcDir%\" Exit/B 1
If Not Exist "%OutDir%\" Exit/B 1
For /F "EOL=Y" %%A In ('WMIC Path Win32_LocalTime Get Year') Do (
For /F "Delims=" %%B In ("%%A") Do Set "ThisYr=%%B")
For /F "Delims=" %%A In ('Where "%SrcDir%:*_%ThisYr%_*.iges"') Do (
If Exist "%%~dpnA.step" Call :Sub %%~nA)
Exit/B
:Sub
Set "BigTit=%~1"
For /F "Delims=" %%A In ('CMD /Q /C "Call Echo %%BigTit:_%ThisYr%_=&:%%"') Do (
If Not Exist "%OutDir%\%%A\" MD "%OutDir%\%%A"
Move "%SrcDir%\%~1*.*" "%OutDir%\%%A">Nul)
Edit, there is no need to export without the potentially useful project switches using the above code.
Supposing the PROJECTTITLE part of the file names does not contain two consecutive underscores, you could use the following script, which splits off the first occurrence of __ and everything after (so the time part and the optional switches are removed), using a standard for loop rather than for /F; then it splits off another 11 characters (hence the remaining date part), using sub-string expansion:
#echo off
setlocal EnableExtensions DisableDelayedExpansion
rem // Define constants here:
set "_SOURCE=."
set "_TARGET=."
for /F delims^=^ eol^= %%F in ('
pushd "%_SOURCE%" ^&^& ^(
dir /B /A:-D ^
"*_????_??_??__??_??_??*.iges" ^
"*_????_??_??__??_??_??*.step" ^
^& popd^)
') do (
call :PROCESS "%%F"
)
endlocal
exit /B
:PROCESS val_file
setlocal DisableDelayedExpansion
set "FILE=%~1"
setlocal EnableDelayedExpansion
for %%I in ("!FILE:__=";"!") do (
endlocal
set "ITEM=%%~I"
setlocal EnableDelayedExpansion
goto :NEXT
)
:NEXT
if defined ITEM (
set "ITEM=!ITEM:~,-11!"
md "%_TARGET%\!ITEM!" 2> nul
if not exist "%_TARGET%\!ITEM!\!FILE!" (
move /Y "%_SOURCE%\!FILE!" "%_TARGET%\!ITEM!\" > nul
)
)
endlocal
endlocal
exit /B
Finally I come up with a script that is able to handle even files whose PROJECTTITLE part contain __ on their own. It splits off the last occurrence of __ and everything after (so the optional switches are removed, if any, or the time part is removed otherwise), using a standard for loop rather than for /F; then it splits off another 21 characters (hence the remaining date and time parts), or, if no optional switches were present, just another 11 characters (hence the remaining date part), using sub-string expansion:
#echo off
setlocal EnableExtensions DisableDelayedExpansion
rem // Define constants here:
set "_SOURCE=."
set "_TARGET=."
for /F delims^=^ eol^= %%F in ('
pushd "%_SOURCE%" ^&^& ^(
dir /B /A:-D ^
"*_????_??_??__??_??_??*.iges" ^
"*_????_??_??__??_??_??*.step" ^
^& popd^)
') do (
call :PROCESS "%%F"
)
endlocal
exit /B
:PROCESS val_file
setlocal DisableDelayedExpansion
set "FILE=%~1"
set "BASE=%~n1"
set "NAME=" & set "ITEM="
setlocal EnableDelayedExpansion
for %%I in ("!BASE:__=";"!") do (
for /F "delims=" %%E in ("!NAME!!ITEM!__") do (
endlocal
set "NAME=%%E"
set "ITEM=%%~I"
setlocal EnableDelayedExpansion
)
)
if defined NAME (
set "NAME=!NAME:~2,-2!"
echo("!ITEM!"| > nul findstr /R "^\"[0-9][0-9]_[0-9][0-9]_[0-9][0-9]\"$" || (
if defined NAME set "NAME=!NAME:~,-10!"
)
if defined NAME set "NAME=!NAME:~,-11!"
if defined NAME (
md "%_TARGET%\!NAME!" 2> nul
if not exist "%_TARGET%\!NAME!\!FILE!" (
move /Y "%_SOURCE%\!FILE!" "%_TARGET%\!NAME!\" > nul
)
)
)
endlocal
endlocal
exit /B
Like the title says, I would like to know how to search a specified directory for a specified file using a for loop in a windows batch script. I can't use any 3rd party software.
Heres what I have at the moment:
for /R "%loc%" %%f in ("%searchterm%") do (
echo %%f
echo %%f>> "%genloc%wefound.txt"
)
%loc% is the location in which it should search.
%searchterm% is the file (e.g "hello.txt") that the script much search for.
It must output any files found (including their full path) on the screen and into the wefound.txt.
Let me know if you need more detail.
for /f "delims=" %%f in ('dir /s /b /a-d "%loc%\%searchterm%"') do (
echo %%f
echo %%f>> "%genloc%wefound.txt"
)
To get the for /r command recursively enumerate the files under a starting point, the file set must include some wildcard character (* or ?). As you know the exact filename, let the dir command do the work of searching the file.
for /R "%loc%" %%f in ("%searchterm%") do (
echo %%~Ff
echo %%~Ff>> "%genloc%wefound.txt"
)
For further details, type: FOR /?
Why complicate things with FOR? All you need is the DIR command:
dir /s /b /a-d "%loc%\%searchterm%>"%genloc%wefound.txt"&type "%genloc%wefound.txt"
The solution is even better if you can get your hands on a Windows port of the tee command (there are numerous free versions available). You could use my hybrid JScript/batch implementation of tee
dir /s /b /a-d "%loc%\%searchterm%"|tee "%genloc%wefound.txt"
In a folder named "drops" I have 3 .dll files. I am looking for a piece of code that can echo the number 0 to each .dll file without having to echo them individually. Basically, I don't want to have to open up each file and change the number to 0... laziness ensues!
for /f %%G IN (C:\Users\%USERNAME%\Desktop\CMDRPG\player\inventory\drops\*.dll) DO echo 0
I have tried using for. Is my code wrong? Thanks in advance.
Edit: Title didn't have anything to do with my question :D
Easy
forfiles /p "C:\Users\%USERNAME%\Desktop\CMDRPG\player\inventory\drops" /m "*.dll" /c "cmd.exe /c echo 0 > #path"
That will do it. Also, in ou code, add > %%G Thats the only mistake I found.
Mona
Drop /F, use
FOR %%G IN (C:\Users\%USERNAME%\Desktop\CMDRPG\player\inventory\drops\*.dll) DO ECHO 0
/F will try to open file *.dll.
I have a bunch of images (100+) in a directory, all with different names. Is there any way to rename them, possibly with a script (I'm running Windows), to 0.jpg, 1.jpg, 2.jpg, etc... without having to rename each one individually? I could launch a Linux virtual machine and copy them over if it isn't possible in Windows.
I've got this so far
#echo off
setlocal enableDelayedExpansion
set MYDIR=F:\Pictures\Wallpapers
set /a count = 0
for /F %%x in ('dir /B/D %MYDIR%') do (
echo %%x
#echo !count!
set /a count+=1
)
Which display the correct file name and the correct counter, but when I try
ren %%x !count!.jpg
Tells me "The system could not find the file specified."
You are not providing the full path for the source file. Don't forget that %%x is just the file name; you need to prepend %MYDIR% to have a complete path:
ren %MYDIR%\%%x !count!.jpg