Sorry for a noob question, but i find it struggling to just put a ";" at the end of line after writing a function. For example, I am coding in C and many time i need to write things like:
f(a);
what i usually type is (from normal mode, using bracket autopair-like feature):
if(a<ESC><SHIFT-a>;
and it need changing mode twice! Comparing to normal editor (sublime):
f(a<right>;
does anyone have more efficient way do do those typing? thanks for any help.
I think you have some "auto-close" plugin installed.
I have that kind of plugin too, and I don't press arrow keys either, since I don't have them on my keyboard. I have this:
" moving cursor out of (right of ) autoClosed brackets
inoremap <c-l> <esc>%%a
So with your example: it would be (assume already in INSERT mode)
f(a<ctrl-l>;
Thus, your fingers never leave the home row.
If you're a vim user, you can hit Shift-a.
Shift-a takes you from normal mode to insert mode, and starts your cursor at the end of the line.
(If you want to be an efficient vim user, you should remap esc to something like caps-lock.)
Comparing to normal editor (sublime):
f(a<right>;
Well… that's exactly how you would do it in Vim if you use Delimitmate or some other "autoclosing" plugin. Why do you insist on making things more complicated than they are?
I have discovered that it is possible in insert mode to execute a single command and return to insert mode by using Ctrl-O.
What about the possibility to insert a single word while in normal mode ?
I could, of course, switch to insert mode, write the word, escape and go back to normal mode.
But I wondered if it was possible to map a sequence (e.g. Ctrl-K) allowing without leaving normal mode to quickly add a single word at the cursor position ?
I tried mapping a function with a prompt (cf. question 11567596 - Ingo Karkat's answer - and Wikia tip 1616) but failed : the word was appended at the end of the line...
My best advice is to embrace insert mode; it's the vi way TM.
Seriously, I also had the idea of creating mappings that allow me to enter a word / sentence / whatever, and then automatically return to normal mode. But...
Whether you use the input() from romainl's answer, or a more elaborate approach (e.g. with a CursorMovedI hook), you have to press Enter or another key to indicate that you're done. That's no better than pressing Esc to leave insert mode the normal way!
You just make things more complex: you spend valuable (short) key sequences for it, you have to spend brain cycles to decide between both approaches, your muscle memory must learn to ways to enter text, and these specials aren't available in other vi-modes (e.g. in Bash).
So, I think it's just not worth it.
This simple function works, here:
function! InsertWord()
let l:user_word = input("Type something then hit ENTER: ")
execute "normal i".l:user_word
endfunction
command! InsertWord call InsertWord()
nnoremap <C-k> :InsertWord<CR>
The whole thing could probably be shortened to a one-liner, though, but I like it like that.
Is there a way to use the alt+backspace in vim command line? It gets unruly when having to backspace /very/long/file/path individually instead of using alt+backspace to delete by words.
try using instead <c-w> (that is ctrl+w) to erase words or <c-u> (ctrl+u) to delete lines.
http://vim.wikia.com/wiki/Map_Ctrl-Backspace_to_delete_previous_word
:imap <C-BS> <C-W>
sets ctrl backspace, i have to look at how to do alt
If you are at the end of the path you can hit B followed by a dW (case matters). This will jump you to the beginning of the word (ignoring the slashes) and subsequently delete the word (again ignoring the slashes).
Hope this helps.
Vim is unable to receive alt input. skeept's answer seems to be the best alternative.
See this answer:
The Alt/Meta key is problematic in Vim and most terminals, see this answer of mine for an overview of the situation (the situation is the same for Meta and Alt).
In short, Vim doesn't receive Alt at all: hitting Alt+Backspace is exactly the same as hitting Backspace.
Anyway, it will be better for you in the long term to learn and get accustomed to Vim's default key-mappings.
The answer marked as right does not correspond to the behaviour in most UI editors for Alt + BackSpace. The vim shortcut which correspond to this behaviour is db - aka delete back ( a word ?! ), dw would delete word forth, which would be the (Altr or Ctrl ) Del shortcut in most ui programs.
Those work basically the same way as the w - move the cursor to the words beginnings and b, move the cursor back to the words beginning ...
Disclaimer: I have used for more than 10 years my .vimrc. , which might have some freaky twist which changes the default behaviour as well ...
Sure, it's as easy as:
if has('gui_running')
imap <M-BS> <C-W>
else
imap <Esc><BS> <C-W>
endif
The trick here is to know, given a hypothetical foo key, that after pressing a Alt+foo combination, many terminals will send an Escape code followed by foo. Apparently there are exceptions — some terminals do send something that vim can recognize as Alt. But if a imap <M-BS> <C-W> mapping doesn't work for you in terminal, then most likely your terminal sends an Esc instead, so the combination imap <Esc><BS> <C-W> should work for you.
You can read more about that in vim documentation by evaluating :help map-alt-keys
x then w should backspace per word as well.
d then w will also delete the current word the cursor is on.
In Eclipse, there is the nice feature of deleting the word until the next capital letter when you press Ctrl+Backspace. For example:
ThisIsSomeText
If you press Ctrl+Backspace, only "Text" will be deleted, where as in VS all the "ThisIsSomeText" will be deleted.
Is there anyway to implement the same in VIM?
If yes, is there similar method for Ctrl-Del also? That as, pressing Ctrl-Del at the beginning of the previous example will only delete "This", rather than all the "ThisIsSomeText".
I don't think it's a native vim feature, but I think this script might help (note: I haven't actually used it myself): http://www.vim.org/scripts/script.php?script_id=1356&rating=life_changing
Update:
Another script: http://www.vim.org/scripts/script.php?script_id=1905
This might do what you want:
nnoremap <C-BS> d?[A-Z]
There may be some fiddliness with the last character in the word. Also, you didn't mention whether you wanted it for Normal mode or Insert mode.
What are the essential vim commands? What does a new-user need to know to keep themselves from getting into trouble? One command per comment, please.
What I find irreplaceable (because it works in vi also, unlike vim's visual mode) are marks. You can mark various spots with m (lower case) and then a letter of your choice (eg x). Then you go elsewhere, and can go back with ``x(backquote letter) to the exact spot, or with'x` (apostrophe letter) to go to the line.
These movements can be used as arguments to commands (yank, delete, etc). For example, you want to delete 10 lines; instead of counting and then moving to the topmost line and entering 10dd, you go to either the start or the end of the block, press mm (mark m), then go to the other end of the block, and press d'm (delete apostrophe m). If you use backquote instead of apostrophe in this example, then the deletion will work character-wise, not line-wise. Try marking in the middle of the line with "mark m", moving to the middle of another line, then entering "d backquote m" and you will see what I mean.
I was very happy the day I learned about using * or # to search, down or up respectively, for the word under the cursor. Make sure to :set incsearch and :set hlsearch first.
I like this QRC!
http://www.fsckin.com/wp-content/uploads/2007/10/vi-vim_cheat_sheet.gif
When you have some repetitive action to take Macros are usually faster than regex.
Just type
q[0-9a-z] in normal mode
Many people use
qq
because it's fast.
Press
q in normal mode
again to stop recording.
Then just type
#[0-9a-z] in normal mode
to repeat what you just recorded.
#q
for the example like above.
Edited to add: you can also repeat the macro. Let's say you programed a macro to jump to the head of a line, insert a tab, and then jump down one line. You then test your macro by typing "#q" to run it once. Then you can repeat the action nine more times by typing "9#q".
:q -> quit
:w -> save
:q! -> quit and don't save
:x -> save and quit
:[number] -> go to line number
G -> go to end of file
dd -> delete line
p -> "put" line
yy -> "copy" line
:s/[searchfor] -> search
I guess those are the basic one to start from
Use the 'J' (J for Join; upper-case) command to delete the newline at the end of a line. You'll find it tricky otherwise.
This recent Vim tutorial from IBM is pretty good
First of all you need to know how to close vi:
ctrl-c : q!
Rest can be found from vimtutor. Launch vimtutor by typing vimtutor at your command line
Although this is a matter of personal preference I've found that one of the essential things to do is to remap Esc to something else.
I find it very uncomfortable to reach for the Esc key to exit insert mode, but the beautiful thing about Vim is that allows key mappings.
I'm currently using the following mapping using Control + S:
inoremap <C-s> <Esc>:w<CR>
This has the advantage of being a key mapping I have already committed to memory and has the added value of saving my work every time I go to normal mode. Yeah, I know it is crazy but I would be hitting the save command that frequently anyway. It's like a bad habit, you know.
" ~/.vimrc
" Turn on line numbering
set nu
" Turn on syntax highlighting
syntax on
" Set 4 space expanding tabs
set tabstop=4
set shiftwidth=4
set softtabstop=4
set expandtab
"turn off line wrapping
set nowrap
" Map CTRL-N to create a new tab
:map <C-n> <ESC>:tabnew<RETURN>
" Map Tab and CTRL-Tab to move between tabs
:map <Tab> <ESC>:tabn<RETURN>
:map <C-Tab> <ESC>:tabp<RETURN>
If you're using vim, the 'u' command (in command mode) will Undo the last command you typed. You can use this command repeatedly to undo mistakes you may have made before saving the file.
See http://www.rayninfo.co.uk/vimtips.html for a great collection of Vim tips, from the basic can't-live-without to very sophisticated stuff that you might never have thought of trying.
Lots of great commands are listed at the Vim Tips Wiki.
It's also good to run the vimtutor when learning these commands
alias vi nedit :)
all humor aside..
for vi WHEN NOT using nedit..
i (switch to insert mode)
a (append = move to end of line and switch to insert mode)
esc (exit insert mode)
dd delete a line
x delete a character
:wq (save and quit)
/ start a search
n find Next
? search backwards..
yy (yank) copy a line to the buffer
pp (paste) paste it here
r (replace a character)
<N> <command> this is a neat - but aggravating feature that lets you type digits and then a command so
5dd will delete 5 lines
but at this point you might as well
- man vi and refresh your memory
While there are LOTS more, I switched from Vi to nedit several years ago, which I find has more features I can use on a regular basis more easily. Tabbed editing, incremental search bar, column select, copy and paste. sort selected lines, search and destroy within selection, whole doc or all open docs..
tear-off drop down menus..
and it supports syntax highlighting for all the languages I use.. (with pattern files I've used a long time over the years. VIM many now be equivalent, but It has to introduce a feature that Nedit doesn't and an easy way to migrate my pattern files before I switch again.
I like the Vim 5.6 Reference Guide, by Bram Moolenaar and Oleg Raisky.
You can directly print it in booklet form, easy to read, I always have it laying around.
It's a tad old, but what are 8 years in Vi's lifespan ?
:set ignorecase smartcase
Makes searching case-insensitive, unless your search includes a capital letter. Not the most indispensable perhaps, but I find myself setting this option any time I'm editing in a new place. It's in any vimrc file I own.
:%!xxd
View the contents of a buffer in hexadecimal. To revert:
:%!xxd -r
My biggest tip: ctrl+q saves the day when you accidentally hit ctrl+s to save the file you are working on
I have this in my vimrc
set number
set relativenumber
This gives me a line numbering system which makes j, k keys really productive.
I use vi very lightly, and I only use the following commands:
a - switch to insert mode (after the cursor)
esc - return to command mode
:wq - save and quit
:q - quit (no save, only without modification)
:q! - force quit (no save, also with modification)
x - delete one character (in command mode)
dd - delete the whole line (in command mode)
I know there are many many more, but those are enough to get you by.
One of my favourite commands is %G which takes to directly to the end of a file. Especially useful in log-files.
How to switch between modes (i to enter insert mode (one of many ways), esc to exit insert mode, colon for command mode) and how to save and exit. (:wq)
Another useful command is to search something: /
e.g. /Mon will search (and in case of vim highlight) any occurences of Mon in your file.
As a couple of other people have already mentioned, vimtutor is the way to go. It will teach you everything you need to know in vim. The one piece of general advice I would give you is to stay out of insert mode as much as possible. There is enormous power in the other modes, it just takes a little bit of practice to get used to it.
i - insert mode (escape to exit)
dd - delete line
shift-y - 'Yank' (copy) line
p - 'Put' (paste) line(s)
shift-v - Visual mode used to select text (tryin 'yanking' this text and 'putting' it somewhere.
ctrl-w n - create new window (you can open a file or start new file here)
ctrl-w v - split existing window vertically
ctrl-n (in insert mode) - autocomplete (if supported)
:! to run a shell command, usually with standard in as the file or a selection (shift-V)
Useful plugins to look at:
* Buffer Explorer - use \be to view files in the buffer (and select to re-open)
NB vi is not vim! vim is rapidly turning into the emacs of the new century. nvi is probably the closest thing to the original vi. Here's a nice hint: "xp" will exchange two characters (try it).
replace 'foo' with 'bar' everywhere in the file
:%s/foo/bar/gc
The real power is in the searching. Here are the essential commands:
/Steve will find the first instance of "Steve" in the text.
n will find the next "Steve" in the text.
:%s//Stephen/g will replace all those instances of "Steve" you just searched for with "Stephen".
Not to promote myself, but I wrote a blog post on this subject. It focuses on the critical parts of Vim for a beginner.
My favorites:
% find matching bracket/brace
* and # next/previous match
gg top of page
G end of the page
<Ctrl-v> Change to visual mode and select column
<Ctrl-a> increase current number by 1
<Ctrl-x> decrease current number by 1
Running macros