In a Sharepoint 2010 installation, we are trying to crawl the content of a small, single-node SharePoint installation. The crawling is partially successful. We are able to retrieve data delivered from the web services (_vti_bin/sitedata.asmx), but when the crawler tries to access the full page contents, it fails. The error message shown in the Crawl Log is:
The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly.
The error which is logged in the ULS is:
08/27/2010 01:52:02.92 mssdmn.exe (0x0A7C) 0x03E4 SharePoint Server Search HTTP Protocol Handler du54 High CHttpAccessorHelper::InitRequestInternal - unexpected status (500) on request for 'http://staging.dsr.dk/_layouts/error.aspx' Authentication 1. [httpacchelper.cxx:657] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
08/27/2010 01:52:02.92 mssdmn.exe (0x0A7C) 0x03E4 SharePoint Server Search PHSts dv44 High CSTS3Accessor::Init: InitRequest failed for URL http://staging.dsr.dk/Pages/Forside.aspx Return error to caller, hr=80041206 [sts3acc.cxx:546] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
08/27/2010 01:52:02.92 mssdmn.exe (0x0A7C) 0x03E4 SharePoint Server Search PHSts dvb1 High CSTS3Accessor::Init fails, Url sts4://staging.dsr.dk/siteurl=/siteid={a78b7d4f-059f-4484-8564-449cd12a97cf}/weburl=/webid={1189e380-76fd-44b7-99a2-ebd4f7245c3d}, hr=80041206 [sts3handler.cxx:312] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
08/27/2010 01:52:02.92 mssdmn.exe (0x0A7C) 0x03E4 SharePoint Server Search PHSts dvb2 High CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041206 [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
We have configured the system according to _http://support.microsoft.com/kb/896861 (method 1).
We have used Fiddler2 to look at the HTTP traffic, which seems normal, i.e., we can see all the requests to _vti_bin/... But the request shown above, to the sts4 protocol, is not caught by Fiddler2. Hints on how to debug the STS4 traffic would be welcome.
Any suggestions on how to make the crawler successfully crawl the full page contents?
Thank you!
Thomas
It turned out the hint was lying a little higher up the ULS log:
Unexpected System.FormatException: Input string was not in a correct format. at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal) at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info) at System.Convert.ToInt32(String value) at DSR.Portal.Core.Service.Identity.IdentityUtility.GetMember(String memberNumberOrCPR) at DSR.Portal.Core.Service.Identity.DSRMembershipProvider.GetUser(String username, Boolean userIsOnline) at DSR.Portal.Core.Service.Identity.DSRMembershipUser.get_Current()
We had implemented a custom MembershipProvider, which was expecting user id’s to be numbers. This failed for Windows Authenticated users, throwing the above stack trace. As a result, the crawler account was not able to retrieve pages, and this caused the problem for the “gatherer”.
So the morale of the story: ALWAYS make sure Windows Authentication works.
Regards
Thomas
Related
I am having issues with the preview of our sharepoint office documents, it is not working, i have checked the OWA Server and the owa services are running . I also checked the binding using Get-SPWOPIBinding and it returned the bindings to the owa server. I have also set the zone to external-https using
Set-SPWOPIZone –zone “external-https”
because i saw that the zone was binded to external-https in my sharepoint servers. but still the issue is still there.not sure why and I don't understand the ULS logs either. these are the ULS logs for the correlation id of one of the documents i was trying to preview.
Unexpected Exception in
SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage
'DistributedLogonTokenCache' - Exception 'System.ArgumentException:
Max connections value should be in the range 1 to 100. Parameter
name: value at
Microsoft.ApplicationServer.Caching.DataCacheFactoryConfiguration.set_MaxConnectionsToServer(Int32
value) at
Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
Token Cache: Failed to initialize SPDistributedSecurityTokenCache
Exception: 'System.ArgumentException: Max connections value should be
in the range 1 to 100. Parameter name: value at
Microsoft.ApplicationServer.Caching.DataCacheFactoryConfiguration.set_MaxConnectionsToServer(Int32
value) at
Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()
at
Microsoft.SharePoint.DistributedCaching.SPDistributedCache..ctor(String
name, TimeSpan timeToLive, SPDistributedCacheContainerType
containerType, Boolean encryptData) at
Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenCache..ctor(String
name, TimeSpan timeToLive, SPDistributedCacheContainerType
containerType, Boolean encrptyData, TimeSpan
minimumTokenExpirationWindow) at
Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenCacheInitializer.Init(Object
state)'.
i'm stuck and i need assistance
Also check in Event Viewer and see if you can get an error code(s). Looks like AppFabric (Distributed Cache) is having an issue, but it may be a symptom of something else, sometimes only one of several issues. There is a fine tuning script available here, but make sure you know what you're doing. Try setting the Max Connections to 1, test it, and then bump it up to 10 and see if you have any issues. Might want to do this during a maintenance window as a restart may be required.
Failure trying to synch web application ab6c1c01-8989-4f5d-8832-a7334a04024d, ContentDB db31bbeb-8a30-42dd-adb0-1ca4cc7029d2 Exception message was System.IO.FileNotFoundException: The site with the id 0679bb31-50fb-48a3-bdd6-ffdeb72645b8 could not be found.
at Microsoft.SharePoint.SPSite..ctor(Guid id, SPFarm farm, SPUrlZone zone, SPUserToken userToken)
at Microsoft.SharePoint.SPSite..ctor(Guid id)
at Microsoft.Office.Server.UserProfiles.ContentDBSynchronizer.AddRemoveSites(String strFirstChangeToken, SPChangeToken lastChangeToken)
at Microsoft.Office.Server.UserProfiles.ContentDBSynchronizer.SynchContentDB()
at Microsoft.Office.Server.Diagnostics.FirstChanceHandler.ExceptionFilter(Boolean fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock, FinallyBlock finallyBlock)
at Microsoft.Office.Server.Diagnostics.ULS.SendWatsonOnExceptionTag(UInt32 tagID, ULSCatBase categoryID, String output, Boolean fRethrowException, TryBlock tryBlock, CatchBlock catchBlock, FinallyBlock finallyBlock)
at Microsoft.Office.Server.UserProfiles.WSSProfileSyncJob.Execute()
Kindly help
The error has a few things. First the root cause of the web application stopping and erroring is the My Site Cleanup Job. However the My Site Cleanup failure looks like a symptom of orphaned sites within the SharePoint Content DB. You can see the ID's of them next to the FileNotFoundException.
As a temporary fix you can either Disable or Reschedule the MySite Cleanup Job in Central Administration. However the permanent fix to resolve the orphaned ID's is to schedule an outage window and detach, then re-attach the content database of the affected web application(s). The other methods for fixing this issue or ones I can't recommend without trying the supported approach first.
Good luck!
I am getting following error when I use pagination of view.
Unable to render the data. If the problem persists, contact your web
server administrator.Correlation
ID:c64a4e9d-64d2-3009-f658-7f1c8b0faebc
When I checked the Logs from ULSViewer I got these errors messages
Error while executing web part: System.ArgumentException: The
specified view is invalid. at
Microsoft.SharePoint.SPViewCollection.get_Item(Guid guid) at
Microsoft.SharePoint.ApplicationPages.InplaceViewEditor.get_View()
at
Microsoft.SharePoint.ApplicationPages.InplaceViewEditor.RenderListView()
at
Microsoft.SharePoint.ApplicationPages.InplaceViewEditor.Execute(String
strCmd) at
Microsoft.SharePoint.ApplicationPages.InplaceViewEditor.OnLoad(EventArgs
e)
Forced due to logging gap, cached # 12/24/2015 10:59:32.88, Original
Level: Verbose] No data was found on the incoming client request
Proxy response returned error: 'The remote server returned an error:
(601).'
Could you please check and let me know what is the issue? I am not able to resolve it.
Thanks in advance.
Best Regards,
Manoj.
Have you added the custom web parts or add custom code?
For troubleshooting the issue, you could check things below:
Create a new list view to check if the same issue will occur.
Do an IIS reset to check if it can work.
I have a user receiving the following error in response to an ItemQueryRq with the QuickBooks Web Connector and IIS 7.
Version:
1.6
Message:
ReceiveResponseXML failed
Description:
QBWC1042: ReceiveResponseXML failed
Error message: There was an exception running the extensions specified in the config file. --> Maximum request length exceeded. See QWCLog for more details. Remember to turn logging on.
The log shows the prior request to be
QBWebConnector.SOAPWebService.ProcessRequestXML() : Response received from QuickBooks: size (bytes) = 3048763
In IIS 7, the max allowed content length is set to 30000000, so I'm not sure what I need to change to allow this response through. Can someone point me in the right direction?
Chances are, your web server is rejecting the Web Connector's HTTP request because you're trying to POST too much data to it. It's tough to tell for sure though, because it doesn't look like you have the Web Connector in VERBOSE mode, and you didn't really post enough of the log to be able to see the rest of what happened, and you didn't post the ItemQuery request you sent or an idea of how many items you're getting back in the response.
If I had to guess, you're sending a very generic ItemQueryRq to try to fetch ALL items, which has a high likelihood of returning A LOT of data, and thus having IIS reject the HTTP request.
Whenever you're fetching a large amount of data using the Web Connector, you should be using iterators. Iterators allow you to break up the result set into smaller chunks.
qbXML Iterator example
other qbXML examples
If you just need to determine if an item exists in QB you can simply add IncludeRetElement to your ItemQuery
So you should post something like
<ItemQueryRq requestID="55">
<FullName>Prepay Discount</FullName>
<IncludeRetElement>ListID</IncludeRetElement>
</ItemQueryRq>
And in Item query response just check the status code. If it is equal to 500 then it means that you should push your item into QB, if it is equal to 0 then it means that item exists
That workaround will save plenty of bytes in your response
I work for The Smeal College of Business at Penn State. I am doing a project for the Supply chain program and I am creating an excel workbook in Sharepoint that uses a lot of UDF's. I have no problem accessing the workbook or using other UDF's, but when I try to use OpenWorkbookForEditing() I get the following stack trace:
System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at ClassName.ExcelWebService.ExcelService.OpenWorkbookForEditing(String workbookPath, String uiCultureName, String dataCultureName, Status[]& status)
at ClassName.ClassNameFunctions.testWriteCell()
Additionally, I've tried to access excelservice.asmx through PHP SOAP and have not received a response. Each attempt to connect to this service provides a 503 error in the IIS logs similar to the following:
2012-08-06 15:14:58 xxxx::xxx:xxxx:xxxx:xxxxxxx POST /_vti_bin/excelservice.asmx - 80 - xxxx::xxx:xxxx:xxxx:xxxxxxx Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+2.0.50727.5456) 503 0 0 59
I've tried changing most of the settings in Sharepoint Central Administration, as well as some of the setting in IIS. Does anyone know what could be causing this problem? Thanks.
I'm running a Sharepoint 2010 server on Windows Server 2008.
Can take a look at this article maybe it will help.
http://technet.microsoft.com/en-us/library/ee513104.aspx
The solution that is suggested here is to just restart. If this is a dev machine that shouldn't be a big deal.
Also make sure that no application pools have stopped as this could make the service unavailable.