I'm trying to display a vertical hierarchy of sites/pages on a publishing site so I've been looking at the table of contents web part which looks like it will do what I want but for some reason it only displays subsites and not pages.
I've changed the site settings to display pages and selected the show pages option on the webpart but still it doesn't show the pages. I'm logged in as admin so permissions aren't an issue.
Anyone got any suggestions!?
Did you enable the 'Show content from starting location' option in the webpart settings ?
Related
Does anyone know how to check out a webpart in Sharepoint 2010. I have an SSRS report within the Webpart that shows on the front page of the Sharepoint site.
I need to edit the web part. I only need to edit or add to the "Show navigation bar the navigation controls and Show Back Button".
When I check these 2 boxes and click APPLY I get an error message "Cannot save all of the property settings for this Web Part. The file is not checked out. You must first check out this document before making changes."
I have full control on the site, but not sure how to check out the web-part to edit and add these 2 buttons to the navigation of the report.
Thanks,
I figured this out through this link...Customize Web Part
I went to libraries and then Pages and found the Home page and checked it out.
We have an existing Sharepoint Webpart Page. In that page ,we have 2 webparts already. They are "Calendar" WebPart (zone2,zone index1) and "Document" Webpart (zone2,zone index2). Am asked to add a "master list" beneath the "Calender" and "Document". I created a view and populated the "master list" successfully. I tried adding to the Page as webpart and it gets added at the top. But I wanted in the bottom. Am not able to drag n drop. I use IE11 and set on the compatability mode.I minimized and tried drag an drop but in vain. Am not able to change zone index as they NOT highlighted. I have site owner permission according to my admin. What am I missing above ? Kindly help (yeah,am going crazy). THANKS.
You can just edit page -> edit webpart -> and in the right side panel that appears set the zone and zone index there.
If you are looking to get the drag and drop working, I've had the same issue when my site wasn't being seen as Intranet as opposed to Internet which changed how compatibility view worked. Make sure that your domain is added to your Intranet Zone sites as http://.domain.com and https://.domain.com. Then your compatibility view will actually be used when your site is picked up as intranet zone instead of internet zone.
I'm really finding it difficult to set up a new theme for my SharePoint 2013 site.
I have uploaded all other files to the design gallery. But when I uploaded the page layouts, and I try to change the Content Type to Page Layout, I get the error below:
Sorry, something went wrong List does not exist.
The page you selected contains a list that does not exist. It may have been deleted by another user.
Technical Details
Correlation ID: ce2b429d-0147-d0c2-bc23-32b039f7d8a6
Please what can I do to resolve this?
Thanks.
I got it working by disabling the publishing feature under > site settings > Site Collections Feature > SharePoint Server Standard Site Collection features
Deactivate
Reactivate
Rebooted the server (probably could have done an IISReset but
overkill!)
Now I can add layout pages under master pages gallery.
In the browser, go to your site, and on the Site Actions menu, click
View All Site Content, and then click the Pages document library.
Or you can browse directly to
http://your_site/pages/forms/allitems.aspx, where your_site is the URL
for your site, such as fabrikamweb/finance for the
http://fabrikamweb/finance subsite.
The Pages document library is created automatically by the publishing
feature and contains all of the pages in a site that are created from
page layouts. You can look in the Page Layout column to see which page
layout was used for a specific page and then click the link to view
that page in the browser.
https://support.office.com/en-us/article/Customize-a-publishing-page-layout-c10bda25-0145-44c6-ba14-7757176fb47f
I am trying to set Global navigation for my publishing portal site in sharepoint 2013 using Managed Metadata. It works fine for Default.aspx but when I browse to Site Settings page it does not show some of navigations.
My navigation is shown bellow :
Now when I browse to default Page it shows navigation perfectly as shown bellow.
But when I browse to Site Settings page it only shows :
Problem: I have created Top Navigation using Managed Metada Service in Sharepoint 2013. It works fine for all pages such as Home.aspx, default.aspx etc... In other words it works great with WebPart Pages. But when I navigate to any of Application pages e.g. Site Settings or Site Columns( they are called application pages which by default referencing default.master page.), it is not showing my Top Nav bar with all its menu item as well as Sub menu items.
I have googled lot, finally I got solution for SharePoint 2010 from here,
First locate/find PlaceHolderTopNavBar
<asp:ContentPlaceHolder id="PlaceHolderTopNavBar"
and rename it to PlaceHolderTopNavBarOriginal,
I looked into my custom.html page for same div tag as suggested in link above but I could not. After that I find
<div class="ms-hide">
and put
<!--SPM:<asp:ContentPlaceHolder id="PlaceHolderTopNavBar" runat="server" Visible="false"/>-->
inside that div.
I have written blog here:
http://apppagetopnavigation.blogspot.in/
Hopefully this will help you all.
I'm not too sure. But I think that's caused by the fact that they're using different masterpages.
Meaning when the person that activated the cascading dropdowns forgot to make that master page the default for the site. He might have only selected set as custom master page instead of default.
Sean
I think this is a bug it happens in all SharePoint 2013 versions and also in the Office 365, in the settings pages it will always show just one level in the menu.
Is it possible to add a cqwp in a page layout?
Ive tried to move the webpart from the page to the page layout used in the page. But In the second case i dont see anything.
Anyone have an idea?
Thanx
It is supported to add instance of CQWP into Page Layout.
Possible reasons why CQWP results are not visible:
Javascript/CSS that affect the visibility of web part
Verify source settings for web part. In case if page and page layouts located on different sites and the source property is configured to Show items from the following list or Show items from the following site and all subsites then this could be the reason. In both cases for for source property the relative path could be specified.