I am working on this and I have some regrets with that I am going to have to do some kind of region based memory allocation scheme for GPU memory because .NET does not allow the adequate level of control over its GC.
I was too naive. I admit that it did cross my mind that just because I was on a platform with GC that I would (and should) not have to do manual memory management, nor would I need to know how the C malloc works nor how it is implemented. I want to do better than this.
What are Racket's facilities in this area?
No. GPU processors are not like CPUs, and practically speaking don't run any GC-ed language implementation, but some very low-level code (e.g. using OpenCL or CUDA or OpenACC or SPIR). They don't really have some general purpose dynamic memory allocation, and they might not even have any virtual memory or MMU. Their memory is generally separate.
What you could do is use some existing library having some GPU compute kernels (like TensorFlow, OpenCV, etc...) and call that library from your Racket based thing using some foreign function interface.
What you might do with a lot of work (probably several years) is to generate some kernel code in OpenCL or CUDA (or SPIR) -mixed with some other generated code managing that kernel code-, that is to implement a compiler from a small subset (to be painfully defined) of your Spiral language into OpenCL or CUDA kernels. In that case, the evil is in the details (and the kernel code you'll generate would depend upon the particular GPU model). You could look into SPOC for inspiration.
nor would I need to know how the C malloc works nor how it is implemented.
It is much worse than that. You'll need to care of a lot of low level details, you'll need to code stuff specific to your OS and hardware, and understanding C malloc is easier than taking care of all the GPU details (that is, generating the "right" GPU and glue code: dive into the specifications of OpenCL for more).
(I believe that it is not worth the effort -several years- to compile your Spiral into GPU kernel code and the necessary glue code running in the CPU)
You should also read more about garbage collection, e.g. the GC handbook.
I was too naive.
You probably still are. Your subject is harder than what you think, if you want an efficient and competitive implementation. Coding a naïve GC (or VM) is easy, but coding an efficient one is hard (requiring several years of work).
I want to do better than this.
You'll need several years of full time work.
What are the input limitations of a bare metal cross compiler...as in does it not compile programs with pointers or mallocs......or anything that would require more than the underlying hardware....also how can 1 find these limitations..
I also wanted to ask...I built a cross compiler for target mips..i need to create a mips executable using this cross compiler...but i am not able to find where the executable is...as in there is 1 executable which i found mipsel-linux-cpp which is supposed to compile,assemble and link and then produce a.out but it is not doing so...
However the ./cc1 gives a mips assembly.......
There is an install folder which has a gcc executable which uses i386 assembly and then gives an exe...i dont understand how can the gcc exe give i386 and not mips assembly when i have specified target as mips....
please help im really not able to understand what is happ...
I followed the foll steps..
1. Installed binutils 2.19
2. configured gcc for mips..(g++,core)
I would suggest that you should have started two separate questions.
The GNU toolchain does not have any OS dependencies, but the GNU library does. Most bare-metal cross builds of GCC use the Newlib C library which provides a set of syscall stubs that you must map to your target yourself. These stubs include low-level calls necessary to implement stream I/O and heap management. They can be very simple or very complex depending on your needs. If the only I/O support is to a UART to stdin/stdout/stderr, then it is simple. You don't have to implement everything, but if you do not implement teh I/O stubs, you won't be able to use printf() for example. You must implement the sbrk()/sbrk_r() syscall is you want malloc() to work.
The GNU C++ library will work correctly with Newlib as its underlying library. If you use C++, the C runtime start-up (usually crt0.s) must include the static initialiser loop to invoke the constructors of any static objects that your code may include. The run-time start-up must also of course initialise the processor, clocks, SDRAM controller, timers, MMU etc; that is your responsibility, not the compiler's.
I have no experience of MIPS targets, but the principles are the same for all processors, there is a very useful article called "Building Bare Metal ARM with GNU" which you may find helpful, much of it will be relevant - especially porting the parts regarding implementing Newlib stubs.
Regarding your other question, if your compiler is called mipsel-linux-cpp, then it is not a 'bare-metal' build but rather a Linux build. Also this executable does not really "compile, assemble and link", it is rather a driver that separately calls the pre-processor, compiler, assembler and linker. It has to be configured correctly to invoke the cross-tools rather than the host tools. I generally invoke the linker separately in order to enforce decisions about which standard library to link (-nostdlib), and also because it makes more sense when a application is comprised of multiple execution units. I cannot offer much help other than that here since I have always used GNU-ARM tools built by people with obviously more patience than me, and moreover hosted on Windows, where there is less possibility of the host tool-chain being invoked instead (one reason why I have also avoided those tool-chains that rely on Cygwin)
EDIT
With more time available, I have rewritten my original answer in an attempt to provide something more useful.
I cannot provide a specific answer for your question. I have never tried to get code running on a MIPS machine. What I do have is plenty of experience getting a variety of "bare metal" boards up and running. All kinds of CPUs and all kinds of compilers and cross compilers. So I have an understanding of the principles that apply in all such situations. I will point out the kind of knowledge you will need to absorb before you can hope to succeed with a job like this, and hopefully I can list some links to resources to get you started on learning that knowledge.
I am worried you don't know that pointers are exactly the kind of thing a bare metal compiler can handle, they are a basic machine primitive. This tells me you are probably not an expert embedded developer who is just stuck in this particular scenario. Never mind. There isn't anything magic about programming an embedded system, and you can learn what you need to know.
The first step is getting to understand the relationship between C and the machine you wish to run code on. Basically C is a portable assembly language. This means that C is good for manipulating the basic operations of the machine. In this sense the basic operations of the machine are reading and writing memory locations, performing arithmetic and boolean operations on the data read from memory, and making branching and looping decisions based on that data. In particular the C concept of pointers allows you to manipulate data at locations in memory that you specify.
So far so good, but just doing raw computations in memory is not usually enough - you need a way to input and output data from memory. To do that you need to manipulate the hardware peripherals on your board. If the hardware peripherals are memory mapped then the machine registers used to control the peripherals look exactly like memory locations and C can manipulate them directly. Even in that case though, it is much more likely that doing useful I/O is best handled by extending the C core language with a library of routines provided just for that purpose. These library routines handle all the nasty details (timers, interrupts, non-memory mapped I/O) involved in manipulating the peripheral hardware on the board, and wrap them up with a convenient C function call interface. The idea is that you can go simply printf("hello world"); and the library call take care of the details of displaying the string.
An appropriately skilled developer knows how to adapt an existing I/O library to a new board, or how to develop new library routines to provide access to non-standard custom hardware. The classic way to develop these skills is to start with something simple, usually a LED for an output device, and a switch for an input device. Write a program that pulses a LED in a predictable way, or reads a switch and reflects in on a LED. The first time you get this working will be hugely satisfying.
Okay I have rambled enough. It is time to provide some more resources for you to study. The good news is that there's never been a better time to learn how things work at the interface between hardware and software. There is a wealth of freely available code and docs. Stackoverflow is a great resource as you know. Good luck! Links follow;
Embedded systems overview
Knowing the C language well is fundamental
Why not get your code working on a simulator before you try real hardware
Another emulated environment
Linux device drivers - an overlapping subject
Another book about bare metal programming
I want to practice programming code for future hardware. What are these? The two main things that come to mind is 64bits and multicore. I also note that cache is important along and GPU have their own tech but right now i am not interested in any graphics programming.
What else should i know about?
-edit- i know a lot of these are in the present but pretty soon all cpus will be multicore and threading will be more important. I consider endians (big vs little) but found that not to be important and already have a big endian CPU to test on.
My recommendation for future :)
nVidia CUDA
nVidia Tegra
Or you can focusing on ray tracing.
If you'd like to dive into a "mainstream" OS that has full 64 bit support, I suggest you start coding against the beta of Mac OS X "Snow Leopard" (codename for 10.6). One of the big enhancements is Grand Central, which is a "facility" for developers to code for multicore systems. Grand Central should distribute workload not only between core, but also to the GPU.
Also very important is the explosion of smart devices such as the iPhone, Android, etc. I strongly believe that some upcoming so-called "netbooks" will rely on OS such as Android and iPhone OS, and as such knowing how to code against their SDK, and knowing how to optimize code for mobile devices is very important (e.g. optimizing performance graphic or otherwise, battery usage).
I can't foretell the future, but one aspect to look into is something like the CELL processor used in the PS3, where instead of many identical general purpose cores, there is only one (although capable of symmetric multithreading) plus many cores that are more specific purpose.
In a simple analysis, the Cell processor can be split into four components: external input and output structures, the main processor called the Power Processing Element (PPE) (a two-way simultaneous multithreaded Power ISA v.2.03 compliant core), eight fully-functional co-processors called the Synergistic Processing Elements, or SPEs, and a specialized high-bandwidth circular data bus connecting the PPE, input/output elements and the SPEs, called the Element Interconnect Bus or EIB.
CUDA and OpenCL are similar in that you separate your general purpose code and high performance computations into separate parts that may run on different hardware and language/api.
64 bits and multicore are the present not the future.
About the future:
Quantum computing or something like that?
How about learning OpenCL? It's a massively parallel processing language based on C. It's similar to nVidia's CUDA but is vendor agnostic. There are no major implementations yet, but expect to see some pretty soon.
As for 64 bit, don't really worry about. Programming will not really be any different unless you're doing really low level stuff (kernels). Higher level frameworks such as Java and .NET allow you to run code on 32 bit and 64 bit machines. Even C/C++ allows you to do this (but not quite so transparently).
I agree with Oli's answere (+1) and would add that in addition to 64-bit environments, you look at multi-core environments. The industry is getting pretty close to the end of the cycle of improvements in raw speed. But we're seeing more and more multi-core CPUs. So parallel or concurrent programming -- which is rilly rilly hard -- is quickly becoming very much in demand.
How can you prepare for this and practice it? I've been asking myself the same same question. So for, it seems to me like functional languages such as ML, Haskell, LISP, Arc, Scheme, etc. are a good place to begin, since truly functional languages are generally free of side effects and therefore very "parallelizable". Erlang is another interesting language.
Other interesting developments that I've found include
The Singularity Research OS
Transactional Memory and Software Isolated Processes
The many Software Engineering Podcast episodes on concurrency. (Here's the first one.)
This article from ACM Queue on "Real World Concurrency"
Of course this question is hard to answer because nobody knows what future hardware will look like (at least in long terms), but multi-threading/parallel programming are important and will be definitely even more important for some years.
I'd also suggest working with GPU computing like CUDA/Stream, but this could be a problem because it's very likely that this will change a lot the next years.
Why might a machine-dependent language be more appropriate for writing certain types of programs? What types of programs would be appropriate?
Why might a machine-dependent language
be more appropriate for writing
certain types of programs?
Speed
Some machines have special instructions sets (Like MMX or SSE on x86, for example) that allows to 'exploit' the architecture in ways that compilers may or may not utilize best (or not utilize at all). If speed is critical (such as video games or data-crunching programs), then you'd want to utilize the best out of the architecture you're on.
Where Portability is Useless
When coding a program for a specific device (take the iPhone or the Nintendo DS as examples), portability is the least of your concerns. This code will most likely never go to another platform as it's specifically designed for that architecture/hardware combination.
Developer Ignorance and/or Market Demand
Computer video games are prime example - Windows is the dominating computer game OS, so why target others? It will let the developers focus on known variables for speed/size/ease-of-use. Some developers are ignorant - they learn to code only on one platform (Such as .NET) and 'forget' that others platforms exist because they don't know about them. They seem to take an approach similar to "It works on my machine, why should I bother porting it to a bizarre combination that I will never use?"
No other choice.
I will take the iPhone again as it is a very good example. While you can program to it in C or C++, you cannot access any of the UI widgets that are linked against the Objective-C runtime. You have no other choice but to code in Objective-C if you want to access any of those widgets.
What types of programs would be
appropriate?
Embedded systems
All of the above apply - When you're coding for an embedded system, you want to take advantage of the full potential of the hardware you're working on. Be it memory management (Such as the CP15 on ARM9) or even obscure hardware that is only attached to the target device (servo motors, special sensors etc).
The best example I can think of is for small embedded devices. When you have to have full control over every detail of optimization due to extremely limited computing power (only a few kilobytes of RAM, for example), you might want to drop down to the assembler level yourself to make everything work perfectly in those small confines.
On the other hand, compilers have gotten sophisticated enough these days where you really don't need to drop below C for most situations, including embedded devices and microcontrollers. The situations are pretty rare when this is necessary.
Consider virtually any graphics engine. Since your run-of-the-mill general purpose CPU cannot perform operations in parallel, you would have a bare minimum of one cycle per pixel to be modified.
However, since modern GPUs can operate on many pixels (or other piece of data) all at the same time, the same operation can be finished much more quickly. GPUs are very well-suited for embarrassingly parallel problems.
Granted, we have high-level-language APIs to control our video cards nowadays, but as you get "closer to the metal", the raw language used to control a GPU is a different animal from the language to control a general purpose CPU, due to the vast difference in architectures.
Closed. This question is off-topic. It is not currently accepting answers.
Closed 9 years ago.
Locked. This question and its answers are locked because the question is off-topic but has historical significance. It is not currently accepting new answers or interactions.
How do emulators work? When I see NES/SNES or C64 emulators, it astounds me.
Do you have to emulate the processor of those machines by interpreting its particular assembly instructions? What else goes into it? How are they typically designed?
Can you give any advice for someone interested in writing an emulator (particularly a game system)?
Emulation is a multi-faceted area. Here are the basic ideas and functional components. I'm going to break it into pieces and then fill in the details via edits. Many of the things I'm going to describe will require knowledge of the inner workings of processors -- assembly knowledge is necessary. If I'm a bit too vague on certain things, please ask questions so I can continue to improve this answer.
Basic idea:
Emulation works by handling the behavior of the processor and the individual components. You build each individual piece of the system and then connect the pieces much like wires do in hardware.
Processor emulation:
There are three ways of handling processor emulation:
Interpretation
Dynamic recompilation
Static recompilation
With all of these paths, you have the same overall goal: execute a piece of code to modify processor state and interact with 'hardware'. Processor state is a conglomeration of the processor registers, interrupt handlers, etc for a given processor target. For the 6502, you'd have a number of 8-bit integers representing registers: A, X, Y, P, and S; you'd also have a 16-bit PC register.
With interpretation, you start at the IP (instruction pointer -- also called PC, program counter) and read the instruction from memory. Your code parses this instruction and uses this information to alter processor state as specified by your processor. The core problem with interpretation is that it's very slow; each time you handle a given instruction, you have to decode it and perform the requisite operation.
With dynamic recompilation, you iterate over the code much like interpretation, but instead of just executing opcodes, you build up a list of operations. Once you reach a branch instruction, you compile this list of operations to machine code for your host platform, then you cache this compiled code and execute it. Then when you hit a given instruction group again, you only have to execute the code from the cache. (BTW, most people don't actually make a list of instructions but compile them to machine code on the fly -- this makes it more difficult to optimize, but that's out of the scope of this answer, unless enough people are interested)
With static recompilation, you do the same as in dynamic recompilation, but you follow branches. You end up building a chunk of code that represents all of the code in the program, which can then be executed with no further interference. This would be a great mechanism if it weren't for the following problems:
Code that isn't in the program to begin with (e.g. compressed, encrypted, generated/modified at runtime, etc) won't be recompiled, so it won't run
It's been proven that finding all the code in a given binary is equivalent to the Halting problem
These combine to make static recompilation completely infeasible in 99% of cases. For more information, Michael Steil has done some great research into static recompilation -- the best I've seen.
The other side to processor emulation is the way in which you interact with hardware. This really has two sides:
Processor timing
Interrupt handling
Processor timing:
Certain platforms -- especially older consoles like the NES, SNES, etc -- require your emulator to have strict timing to be completely compatible. With the NES, you have the PPU (pixel processing unit) which requires that the CPU put pixels into its memory at precise moments. If you use interpretation, you can easily count cycles and emulate proper timing; with dynamic/static recompilation, things are a /lot/ more complex.
Interrupt handling:
Interrupts are the primary mechanism that the CPU communicates with hardware. Generally, your hardware components will tell the CPU what interrupts it cares about. This is pretty straightforward -- when your code throws a given interrupt, you look at the interrupt handler table and call the proper callback.
Hardware emulation:
There are two sides to emulating a given hardware device:
Emulating the functionality of the device
Emulating the actual device interfaces
Take the case of a hard-drive. The functionality is emulated by creating the backing storage, read/write/format routines, etc. This part is generally very straightforward.
The actual interface of the device is a bit more complex. This is generally some combination of memory mapped registers (e.g. parts of memory that the device watches for changes to do signaling) and interrupts. For a hard-drive, you may have a memory mapped area where you place read commands, writes, etc, then read this data back.
I'd go into more detail, but there are a million ways you can go with it. If you have any specific questions here, feel free to ask and I'll add the info.
Resources:
I think I've given a pretty good intro here, but there are a ton of additional areas. I'm more than happy to help with any questions; I've been very vague in most of this simply due to the immense complexity.
Obligatory Wikipedia links:
Emulator
Dynamic recompilation
General emulation resources:
Zophar -- This is where I got my start with emulation, first downloading emulators and eventually plundering their immense archives of documentation. This is the absolute best resource you can possibly have.
NGEmu -- Not many direct resources, but their forums are unbeatable.
RomHacking.net -- The documents section contains resources regarding machine architecture for popular consoles
Emulator projects to reference:
IronBabel -- This is an emulation platform for .NET, written in Nemerle and recompiles code to C# on the fly. Disclaimer: This is my project, so pardon the shameless plug.
BSnes -- An awesome SNES emulator with the goal of cycle-perfect accuracy.
MAME -- The arcade emulator. Great reference.
6502asm.com -- This is a JavaScript 6502 emulator with a cool little forum.
dynarec'd 6502asm -- This is a little hack I did over a day or two. I took the existing emulator from 6502asm.com and changed it to dynamically recompile the code to JavaScript for massive speed increases.
Processor recompilation references:
The research into static recompilation done by Michael Steil (referenced above) culminated in this paper and you can find source and such here.
Addendum:
It's been well over a year since this answer was submitted and with all the attention it's been getting, I figured it's time to update some things.
Perhaps the most exciting thing in emulation right now is libcpu, started by the aforementioned Michael Steil. It's a library intended to support a large number of CPU cores, which use LLVM for recompilation (static and dynamic!). It's got huge potential, and I think it'll do great things for emulation.
emu-docs has also been brought to my attention, which houses a great repository of system documentation, which is very useful for emulation purposes. I haven't spent much time there, but it looks like they have a lot of great resources.
I'm glad this post has been helpful, and I'm hoping I can get off my arse and finish up my book on the subject by the end of the year/early next year.
A guy named Victor Moya del Barrio wrote his thesis on this topic. A lot of good information on 152 pages. You can download the PDF here.
If you don't want to register with scribd, you can google for the PDF title, "Study of the techniques for emulation programming". There are a couple of different sources for the PDF.
Emulation may seem daunting but is actually quite easier than simulating.
Any processor typically has a well-written specification that describes states, interactions, etc.
If you did not care about performance at all, then you could easily emulate most older processors using very elegant object oriented programs. For example, an X86 processor would need something to maintain the state of registers (easy), something to maintain the state of memory (easy), and something that would take each incoming command and apply it to the current state of the machine. If you really wanted accuracy, you would also emulate memory translations, caching, etc., but that is doable.
In fact, many microchip and CPU manufacturers test programs against an emulator of the chip and then against the chip itself, which helps them find out if there are issues in the specifications of the chip, or in the actual implementation of the chip in hardware. For example, it is possible to write a chip specification that would result in deadlocks, and when a deadline occurs in the hardware it's important to see if it could be reproduced in the specification since that indicates a greater problem than something in the chip implementation.
Of course, emulators for video games usually care about performance so they don't use naive implementations, and they also include code that interfaces with the host system's OS, for example to use drawing and sound.
Considering the very slow performance of old video games (NES/SNES, etc.), emulation is quite easy on modern systems. In fact, it's even more amazing that you could just download a set of every SNES game ever or any Atari 2600 game ever, considering that when these systems were popular having free access to every cartridge would have been a dream come true.
I know that this question is a bit old, but I would like to add something to the discussion. Most of the answers here center around emulators interpreting the machine instructions of the systems they emulate.
However, there is a very well-known exception to this called "UltraHLE" (WIKIpedia article). UltraHLE, one of the most famous emulators ever created, emulated commercial Nintendo 64 games (with decent performance on home computers) at a time when it was widely considered impossible to do so. As a matter of fact, Nintendo was still producing new titles for the Nintendo 64 when UltraHLE was created!
For the first time, I saw articles about emulators in print magazines where before, I had only seen them discussed on the web.
The concept of UltraHLE was to make possible the impossible by emulating C library calls instead of machine level calls.
Something worth taking a look at is Imran Nazar's attempt at writing a Gameboy emulator in JavaScript.
Having created my own emulator of the BBC Microcomputer of the 80s (type VBeeb into Google), there are a number of things to know.
You're not emulating the real thing as such, that would be a replica. Instead, you're emulating State. A good example is a calculator, the real thing has buttons, screen, case etc. But to emulate a calculator you only need to emulate whether buttons are up or down, which segments of LCD are on, etc. Basically, a set of numbers representing all the possible combinations of things that can change in a calculator.
You only need the interface of the emulator to appear and behave like the real thing. The more convincing this is the closer the emulation is. What goes on behind the scenes can be anything you like. But, for ease of writing an emulator, there is a mental mapping that happens between the real system, i.e. chips, displays, keyboards, circuit boards, and the abstract computer code.
To emulate a computer system, it's easiest to break it up into smaller chunks and emulate those chunks individually. Then string the whole lot together for the finished product. Much like a set of black boxes with inputs and outputs, which lends itself beautifully to object oriented programming. You can further subdivide these chunks to make life easier.
Practically speaking, you're generally looking to write for speed and fidelity of emulation. This is because software on the target system will (may) run more slowly than the original hardware on the source system. That may constrain the choice of programming language, compilers, target system etc.
Further to that you have to circumscribe what you're prepared to emulate, for example its not necessary to emulate the voltage state of transistors in a microprocessor, but its probably necessary to emulate the state of the register set of the microprocessor.
Generally speaking the smaller the level of detail of emulation, the more fidelity you'll get to the original system.
Finally, information for older systems may be incomplete or non-existent. So getting hold of original equipment is essential, or at least prising apart another good emulator that someone else has written!
Yes, you have to interpret the whole binary machine code mess "by hand". Not only that, most of the time you also have to simulate some exotic hardware that doesn't have an equivalent on the target machine.
The simple approach is to interpret the instructions one-by-one. That works well, but it's slow. A faster approach is recompilation - translating the source machine code to target machine code. This is more complicated, as most instructions will not map one-to-one. Instead you will have to make elaborate work-arounds that involve additional code. But in the end it's much faster. Most modern emulators do this.
When you develop an emulator you are interpreting the processor assembly that the system is working on (Z80, 8080, PS CPU, etc.).
You also need to emulate all peripherals that the system has (video output, controller).
You should start writing emulators for the simpe systems like the good old Game Boy (that use a Z80 processor, am I not not mistaking) OR for C64.
Emulator are very hard to create since there are many hacks (as in unusual
effects), timing issues, etc that you need to simulate.
For an example of this, see http://queue.acm.org/detail.cfm?id=1755886.
That will also show you why you ‘need’ a multi-GHz CPU for emulating a 1MHz one.
Also check out Darek Mihocka's Emulators.com for great advice on instruction-level optimization for JITs, and many other goodies on building efficient emulators.
I've never done anything so fancy as to emulate a game console but I did take a course once where the assignment was to write an emulator for the machine described in Andrew Tanenbaums Structured Computer Organization. That was fun an gave me a lot of aha moments. You might want to pick that book up before diving in to writing a real emulator.
Advice on emulating a real system or your own thing?
I can say that emulators work by emulating the ENTIRE hardware. Maybe not down to the circuit (as moving bits around like the HW would do. Moving the byte is the end result so copying the byte is fine). Emulator are very hard to create since there are many hacks (as in unusual effects), timing issues, etc that you need to simulate. If one (input) piece is wrong the entire system can do down or at best have a bug/glitch.
The Shared Source Device Emulator contains buildable source code to a PocketPC/Smartphone emulator (Requires Visual Studio, runs on Windows). I worked on V1 and V2 of the binary release.
It tackles many emulation issues:
- efficient address translation from guest virtual to guest physical to host virtual
- JIT compilation of guest code
- simulation of peripheral devices such as network adapters, touchscreen and audio
- UI integration, for host keyboard and mouse
- save/restore of state, for simulation of resume from low-power mode
To add the answer provided by #Cody Brocious
In the context of virtualization where you are emulating a new system(CPU , I/O etc ) to a virtual machine we can see the following categories of emulators.
Interpretation: bochs is an example of interpreter , it is a x86 PC emulator,it takes each instruction from guest system translates it in another set of instruction( of the host ISA) to produce the intended effect.Yes it is very slow , it doesn't cache anything so every instruction goes through the same cycle.
Dynamic emalator: Qemu is a dynamic emulator. It does on the fly translation of guest instruction also caches results.The best part is that executes as many instructions as possible directly on the host system so that emulation is faster. Also as mentioned by Cody, it divides the code into blocks ( 1 single flow of execution).
Static emulator: As far I know there are no static emulator that can be helpful in virtualization.
How I would start emulation.
1.Get books based around low level programming, you'll need it for the "pretend" operating system of the Nintendo...game boy...
2.Get books on emulation specifically, and maybe os development. (you won't be making an os, but the closest to it.
3.look at some open source emulators, especially ones of the system you want to make an emulator for.
4.copy snippets of the more complex code into your IDE/compliler. This will save you writing out long code. This is what I do for os development, use a district of linux
I wrote an article about emulating the Chip-8 system in JavaScript.
It's a great place to start as the system isn't very complicated, but you still learn how opcodes, the stack, registers, etc work.
I will be writing a longer guide soon for the NES.