I am working on an intranet in Sharepoint online. I have added a custom css file and included it in the masterpage, after the default stylesheets. In the sourcecode I can see it clearly and I can follow the path to its intended file.
Earlier I had no problems to check it out, edit in Sharepoint designer, save it, then checking it in and changes would apply to the site.
But now the changes I make don't seem to catch. I have cleared cache on several browsers but still no change.
The masterpage and the custom startpage are both published. No files are left checked out.
I may be a sharepoint noob, I have searched any number of forums but not found anything pertinent to my problem.
Can anyone give me a pointer in the right direction please?
:)
Do you save the CSS file in a document library that uses versioning? Perhaps you forgot to publish the latest version of your changes, so browsers only see your previous version.
I made an account specifically to respond to this post because I was having the same issue and found your update about creating a new CSS file helpful in determining the real issue. So I wanted to share my solution!
In the end I discovered it was our BLOB cache being enabled that was causing the issue. We had enabled it to use image renditions. As per the following technet article regarding configuring the BLOB cache, I removed CSS from the file types and our issue was resolved!
http://technet.microsoft.com/en-US/library/cc770229(v=office.15).aspx#BLOB
I hope this helps :)
You are logged in as the Site Collection administrator?
CTRL+F5 to get the latest .css from server?
When you View Source you are able to see the link to your .css file?
When you follow the link to the .css file and open the .css file, it has the recent changes you made?
I think you might have done this.. but make sure after publishing the .css file it is approved.
Press F12 to load IE Dev Toolbar to see what styles are being used in the elements in question. May be you have a small syntax error in the recent classes you added.
Thanks, Karthik.
In the end I made a copy of the css file, gave it a new name and referred to that instead, worked like a charm.
Thanks for your answers and comments all
Under Site Collection Administration settings, go to SharePoint Designer settings and make sure all the checkboxes are marked including "Enable Customizing Master Pages and Page Layouts "
Also, make sure your tag that cites your custom CSS is just below the last meta tag in the head of your master page.
Lastly, remove quotes... there are additional quotes added with javascript so you don't need quotes AND have the full URL to the stylesheet or it will not work!
Related
I'm looking to use Redmine for document management. I know that Redmine is not ideal for this task but there is already a lot of content on the site so I'd like to utilize it if possible.
Redmine currently does not a have great documents module. The files we've uploaded look to be amended on that specific page and it doesn't seem to be able to move to another page (unless you download and re-upload to the proper page).
Idea 1
I see there is a Files section, which could work as a central repository (and you can upload document based on release) however, is there a way to set up a nice-looking 'front-end' page that automatically updates based on new submissions to the Files tab? I envision this front end to be a simple wiki page with the document name, a short description and a links to the file posted in the Files tab.
There are so many documents uploaded to varying pages on the Redmine site. I would only do the whole download and re-upload of files if there was a way to automatically update the 'front end' wiki.
Idea 2
I see there is a DMSF plugin for Redmine. Has anyone used this before and has is solved document management issues? I'd like to hear your feedback. Even if DMSF doesn't totally solve my issue, anything is better than what I have now.
Thanks!
In my opinion DMSF module is a perfect companion for Redmine. We have adopted it in our company. You can easily deal with document versions, webdav access, custom approval workflow, document modifications notification with the extra value of being well integrated with Redmine features (roles, dynamic links in Wiki and issue text and notes).
I've spent several hours trying to figure this out; hopefully, it's an easy solution and the difficulty is simply because I'm brand new to Orchard CMS and no where near an expert web developer...
I've created a Products Download page and need to insert hyperlinks to files that exist on the file system.
the path to the file (on disk) is : c:\Orchard CMS\Downloads\ProductOne\File1.zip
in the page editor, I insert a hyperlink reference with the following URL: /Downloads/ProductOne/File1.zip
When I hover over the hyperlink, it looks correct: http://localhost:12345/Downloads/ProductOne/File1.zip
However, when I click the link, I receive the following exception:
HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Any help would be extremely appreciated!
If you don't want to play with source code and web.config files you should use Orchard Media feature. It allows you to upload files into Orchard filesystem and manage those. Links to files uploaded this way look like http://www.myorchardsite.com/Media/[Media folder path]/YourFile.zip
If you are not an experienced developer, I'd strongly advise you to take this approach. The only drawback is that you'd have to reupload those files into Orchard. But this is not as bad as it looks - you can zip them and upload as a single file (Orchard will take care of unpacking the archive if you check the checkbox below upload field).
You need a web.config file that allows the files to be served. You can use one from one of the content directories that can be found in modules or themes.
We set up the SharePoint 12 hive folder for a custom theme with a new xml entry and folder.
Is everything required for a custom theme living in the theme folder? I'm asking because we are seeing CSS files that appear to be dynamically named rendered on SharePoint pages in the folder that are not actually in the folder.
Will we have to use SPD and custom site changes to get a custom theme to work?
I've got a designer working only in the theme folder, but he is seeing rendered css that he can't get to. He is not using SPD
That 1011-65001 squence file is found nowhere? what is that an where can I find it. Any way to have my custom theme all hard fixed name css files in that folder without using SPD?
/_themes/MYNEWFOLDER/MYNEWTHEME1011-65001.css?rev=12%2E0%2E0%2E6421
===
Update: I just realzed that css is creatd when I apply the theme and so it's in my _themes site folder. But now, when I attempt to re-apply the theme, that was working before, now i get a write error on _themes.
I can answer your first query why its dyanamic name this is because themes which you installed are ghosted version and when you apply them an unghosted version is created for the specific site where it is applied. so a dyanamic naming is required and it cannot be hard coded in MOSS even if you try using SPD you can do it but you have to remove the theming then.
the same you have also have notified in update that the css name is changed only when you apply it.
regarding your second issue of reapplying it did you try applying another them and then back to first one and is giving error then please check the 12 hive logs it will give you cause of failure and if still you are not able to figure out the same plz share the relavent log here we will try to help you
Does anybody know how to find offending web part which causes this error ?
“A Web Part or Web Form Control on this Web Part Page cannot be displayed or imported because it is not registered on this site as safe.”
I have inherited an old SharePoint 2003 portal site which uses custom web parts.
I know what this error means. I also know that each web part must be installed and registred as safe in web.config. The problem is that I don't know which one is missing.
I get same error when I'm trying to open the page in FrontPage as well.
Use contents=1 in QueryString to disable/remove WebParts from page that causes errors.
stsadm.exe -o enumallwebs -includewebparts
http://sharepointreporter.wordpress.com/
Requires updating to Sp2 I believe, for this command to be available. Problematic web parts will appear as 'Missing' in the resultant list.
Go to Event Viewer of the machine and you shall be able to see Error entries. Out of tons of entries you have to find out the entries related to you and you shall be able to see the names of the webparts that the sharepoint site is trying to load but fails. If you shall read the complete description of the error entry in the Event Viewer, it will give you version and even PublicKey Token of the webpart as well.
I hope this helps!!!
Try reading this:
http://www.bluedoglimited.com/SharePointThoughts/ViewPost.aspx?ID=189
It should give you some clues to solving the problem. Essentially you have a control that is not marked as safe and it is failing. You can most likely config it to work, but the link above has other possible solutions.
in your url just append content=1. This will give you the all the webparts that are deployed. Now, you can keep deleting each of the webpart to find which one is causing issue ( ensure that you know to add the web parts back).
For example: if Url is http://localhost:9000/default.aspx, try with http://localhost:9000?contents=1
Alternatively, try to create a new webpart page,add web parts that are there on your actual page and check which one is causing issue. This will avoid changes to the actual page.
Hope this helps.
I've just suggested this same answer on MSDN:
This stsadm helped me in finding where the webpart was referenced in any way:
stsadm -o enumallwebs -includewebparts > C:\temp\somelog.txt
Then you can see the web part is listed under some <Web Id=... Url=...> XML node, i.e. you know the "culprit" web site.
At that point, some reasons I've found for those forgotten references:
the webpart is used in some sub-site of the culprit website, and the sub site is hidden from the quick list or top bar
the webpart has been deleted from the culprit website, but it still is in the "site collection recycle bin". You can reach that by going to the normal website recycle bin, then look for its link on the top bar description ("Use this page to restore items that..."). By the way, this site collection recycle bin has two views itself: be sure to check them both.
In both cases, I got some help by browsing the culprit website with SharePoint Manager. With that I could easily spot the existence of a forgotten subsite, as well as the existence of this "second level recycle bin".
HTH
When I deactivate a feature, or even just after removing a Solution package, I can still choose to select the Master Page which belonged to the feature I removed. This is a problem for me.
The only way to get rid of the hanging reference is to open SharePoint Designer and to browse to the sites _catalog directory then remove the .master files from the masterpages directory.
Is there a way to cause different uninstall behavior which would remove the hanging reference? If so how?
Thank you,
Yes deactivating the Master Page feature will not remove the master page from the Site you need to do it manually or using some feature receiver code that hooks the deactivating event.
My MOSS is a bit rusty, but can't you write some code in the
feature_deactivated event?
Do a manual remove of the master page there?