How can I find the size of a ELF file/image with Header information? - linux

Question

I need to find the size of an elf image for some computation. I have tried with the readelf utility on linux which gives the informations about the headers and section. I need to have the exact file size of the elf(on the whole).
How do I find the size of the ELF from the header information or Is there any other means to find the size of an elf without reading the full image.

Answer 1

The answer to the specific question is a little tricky for ELF files.
The following will compute the size of the "descriptive" information in an ELF file using the header: e_ehsize + (e_phnum * e_phentsize) + (e_shnum * e_shentsize)
The above is based on the ELF documentation.
The next piece to add to the above sum is the size in the file of the section entries. Intuitively we would like to compute this using sh_size for each of the sections in the file -- e_shnum of them. HOWEVER, this doesn't yield the correct answer due to alignment issues. If you use an ordered list of sh_offset values you can compute the exact number of bytes that the section entry occupies (I found some strange alignments where using sh_addralign isn't as useful as you would like); for the last section entry use the file header's e_shoff since the section header table is last. This worked for the couple I checked.
update.c in libelf has the details it uses when updating an elf file.

Answer 2

Example:
ls -l gives 126584
Calculation using the values also reported by readelf -h:
Start of section headers e_shoff 124728
Size of section headers e_shentsize 64
Number of section headers e_shnum 29
e_shoff + ( e_shentsize * e_shnum ) = 126584
This assumes that the section header table (SHT) is the last part of the ELF. This is usually the case but it could also be that the last section is the last part of the ELF. This should be checked for, but is not in this example.
Here is a working implementation in C, compile with gcc elfsize.c -o elfsize:
#include <elf.h>
#include <byteswap.h>
#include <stdio.h>
#include <stdint.h>
#include <errno.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
typedef Elf32_Nhdr Elf_Nhdr;
static char *fname;
static Elf64_Ehdr ehdr;
static Elf64_Phdr *phdr;
#if __BYTE_ORDER == __LITTLE_ENDIAN
#define ELFDATANATIVE ELFDATA2LSB
#elif __BYTE_ORDER == __BIG_ENDIAN
#define ELFDATANATIVE ELFDATA2MSB
#else
#error "Unknown machine endian"
#endif
static uint16_t file16_to_cpu(uint16_t val)
{
if (ehdr.e_ident[EI_DATA] != ELFDATANATIVE)
val = bswap_16(val);
return val;
}
static uint32_t file32_to_cpu(uint32_t val)
{
if (ehdr.e_ident[EI_DATA] != ELFDATANATIVE)
val = bswap_32(val);
return val;
}
static uint64_t file64_to_cpu(uint64_t val)
{
if (ehdr.e_ident[EI_DATA] != ELFDATANATIVE)
val = bswap_64(val);
return val;
}
static long unsigned int read_elf32(int fd)
{
Elf32_Ehdr ehdr32;
ssize_t ret, i;
ret = pread(fd, &ehdr32, sizeof(ehdr32), 0);
if (ret < 0 || (size_t)ret != sizeof(ehdr)) {
fprintf(stderr, "Read of ELF header from %s failed: %s\n",
fname, strerror(errno));
exit(10);
}
ehdr.e_shoff = file32_to_cpu(ehdr32.e_shoff);
ehdr.e_shentsize = file16_to_cpu(ehdr32.e_shentsize);
ehdr.e_shnum = file16_to_cpu(ehdr32.e_shnum);
return(ehdr.e_shoff + (ehdr.e_shentsize * ehdr.e_shnum));
}
static long unsigned int read_elf64(int fd)
{
Elf64_Ehdr ehdr64;
ssize_t ret, i;
ret = pread(fd, &ehdr64, sizeof(ehdr64), 0);
if (ret < 0 || (size_t)ret != sizeof(ehdr)) {
fprintf(stderr, "Read of ELF header from %s failed: %s\n",
fname, strerror(errno));
exit(10);
}
ehdr.e_shoff = file64_to_cpu(ehdr64.e_shoff);
ehdr.e_shentsize = file16_to_cpu(ehdr64.e_shentsize);
ehdr.e_shnum = file16_to_cpu(ehdr64.e_shnum);
return(ehdr.e_shoff + (ehdr.e_shentsize * ehdr.e_shnum));
}
long unsigned int get_elf_size(char *fname)
/* TODO, FIXME: This assumes that the section header table (SHT) is
the last part of the ELF. This is usually the case but
it could also be that the last section is the last part
of the ELF. This should be checked for.
*/
{
ssize_t ret;
int fd;
long unsigned int size = 0;
fd = open(fname, O_RDONLY);
if (fd < 0) {
fprintf(stderr, "Cannot open %s: %s\n",
fname, strerror(errno));
return(1);
}
ret = pread(fd, ehdr.e_ident, EI_NIDENT, 0);
if (ret != EI_NIDENT) {
fprintf(stderr, "Read of e_ident from %s failed: %s\n",
fname, strerror(errno));
return(1);
}
if ((ehdr.e_ident[EI_DATA] != ELFDATA2LSB) &&
(ehdr.e_ident[EI_DATA] != ELFDATA2MSB))
{
fprintf(stderr, "Unkown ELF data order %u\n",
ehdr.e_ident[EI_DATA]);
return(1);
}
if(ehdr.e_ident[EI_CLASS] == ELFCLASS32) {
size = read_elf32(fd);
} else if(ehdr.e_ident[EI_CLASS] == ELFCLASS64) {
size = read_elf64(fd);
} else {
fprintf(stderr, "Unknown ELF class %u\n", ehdr.e_ident[EI_CLASS]);
return(1);
}
close(fd);
return size;
}
int main(int argc, char **argv)
{
ssize_t ret;
int fd;
if (argc != 2) {
fprintf(stderr, "Usage: %s <ELF>\n", argv[0]);
return 1;
}
fname = argv[1];
long unsigned int size = get_elf_size(fname);
fprintf(stderr, "Estimated ELF size on disk: %lu bytes \n", size);
return 0;
}

Answer 3

Perhaps gelf could be useful.
GElf is a generic, ELF class-independent API for manipulat- ing ELF object files. GElf provides a single, common inter- face for handling 32-bit and 64-bit ELF format object files.
specifically these functions:
elf32_fsize, elf64_fsize - return the size of an object file type

Answer 4

Have you tried using the gnu "readelf" utility?
http://sourceware.org/binutils/docs/binutils/readelf.html

Answer 5

All you have to do is to sum the last section's file offset and its size.
fseek(fileHandle, elfHeader.e_shoff + (elfHeader.e_shnum-1) * elfHeader.e_shentsize, SEEK_SET);
Elf64_Shdr sectionHeader; // or Elf32_Shdr
fread(&sectionHeader, 1, elfHeader.e_shentsize, fileHandle);
int fileSize = sectionHeader.sh_offset + sectionHeader.sh_size;
elfHeader used values:
e_shoff = Section header table file offset
e_shnum = Section header table entry count
e_shentsize = Section header table entry size
sectionHeader used values:
sh_offset = Section file offset
sh_size = Section size in bytes

Answer 6

You can use the stat functions family (stat(), lstat(), fstat()) to get the size of any file (using the st_size member of the stat member).
Do you need something more specific?
If you really want to use the ELF structure, use the elf.h header which contains that structure:
typedef struct {
unsigned char e_ident[EI_NIDENT];
uint16_t e_type;
uint16_t e_machine;
uint32_t e_version;
ElfN_Addr e_entry;
ElfN_Off e_phoff;
ElfN_Off e_shoff;
uint32_t e_flags;
uint16_t e_ehsize;
uint16_t e_phentsize;
uint16_t e_phnum;
uint16_t e_shentsize;
uint16_t e_shnum;
uint16_t e_shstrndx;
} Elf32_Ehdr;
It's the header of an ELF32 file (replace 32 with 64 for a 64-bit file).
e_ehsize is the size of the file in bytes.
I'll copy verbatim the comment that was posted as an edit suggestion:
This answer is incorrect. e_ehsize is merely the size of the elf header, not the elf file.