i have a directory with a lot of subdirectories with a # infront of them:
#adhasdk
#ad18237
I want to rename them all and remove the # caracter
I tried to do:
rename -n `s/#//g` *
but didn't seem to work.
-bash: s/#//g: No such file or directory
Any ideas on this.
Thanks
Just use
$ rename 's/^#//' *
use -n just to check that what you think it would happen really happens.
In you example you have the clue about the wrong quotes used (backticks) in the error message
-bash: s/#//g: No such file or directory
bash is trying to execute a command named s/#//g.
No that using g (global) and not anchoring the regular expression you will replace any #, not just the one in the first position.
I don't know whether it's just a typo when you typed it here, but that "rename" command should work if:
you leave off the "-n" and
you quote the substitution with regular single-quotes and not back-quotes
The "-n" tells it to not really do anything. The back-quotes are just wrong (they mean something but not what you want here).
The problem is that you use backticks (`). You should use normal quotes:
rename -n 's/#//g' *
for DIR in \#*/
do
echo mv "$DIR" "${DIR/#\#/}"
done
I had to rename all folders inside a given folder. Each folder name had some text inside round braces. The following command removed the round braces from all folder names:
rename 's/(.+)//' *
Some distros doesn't support regexp in rename. You have to install prename. Even more, sometimes you can't install prename and you have to install gprename to have binary prename.
If you have 'prename' then just change backtick character " ` " to single quote and everything should work.
So the solution should be:
prename -n 's/#//g' *
or
prename -n 'y/#//' *
Related
In colab, I have unzip a file, but now there is too much files in the directory according to the colab's setup. Is there a command line to remove the last x files of a directory?
I know I can remove all the files from this repository with rm -rf *, but I just want to remove for instance the last 100 files of the repository.
Try globing or better REGEX.
The most easy way is with globing you use the star * and some differentiation example: rm *.txt # will delete all files that end with .txt or rm document*.local # will delete all files which start with document and end with .local
The better wey is searching files by attribut and executing command on the result but is a bit complex to explain so check this out.
https://www.cyberciti.biz/faq/linux-unix-how-to-find-and-remove-files/
Using a shell array and parameter expansion:
all_files=(*)
printf '%s\n' "${all_files[#]: -100}" | nl
#rm "${all_files[#]: -100}"
Uncomment the last line if it looks like the correct list of files to delete.
The space between the colon and the minus sign is required to disambiguate from another form of parameter expansion.
Ref: 3.5.3 Shell Parameter Expansion
cat ~/.last_dir
/mnt/c/Users/Administrator/OneDrive/Desktop/main project/backup/main project 2
cd cat ~/.last_dir
-bash: cd: too many arguments
I tried using backslash inside the file
/mnt/c/Users/Administrator/OneDrive/Desktop/main\ project/backup/main\ project\ 2
Still same error
You need to quote the results of expanding cat ...:
cd "$(cat ~/.last_dir)"
cd "$(<~/.last_dir)"
First, put quotes around the $(...) to make the space part of the filename.
Second, $(<...) is a bash construct that reads the file directly without executing cat, but is not entirely portable.
For a more generic, less bash-specific version, use Maxim's solution.
just put quotation marks around your path:
"/mnt/c/Users/Administrator/OneDrive/Desktop/main project/backup/main project 2"
this should work for most cases
Scenario: I have a script but no idea where I am in the directory tree, I need to resolve back to the nearest known location UPROC[something]
What I have so far:
I have a script running in a directory for example:
/home/jim/query/UPROCL/test/bob/dircut.sh
now the only constant in this is that the Directory I want will begin with UPROC... maybe not UPROCL but definitely UPROC
So I have written the following:
#!/bin/bash
#Absolute path for this script
SCRIPT=$(readlink -f "$0")
echo $SCRIPT
#Gets Path of script without script name
SCRIPTPATH=$(dirname "$SCRIPT")
echo $SCRIPTPATH
#Cuts everything after UPROC(.* is wildcard)/
CUTDOWN=$(sed 's/\(UPROC.*\/\).*/\1/' <<< $SCRIPTPATH)
echo $CUTDOWN
The only problem is that it output is:
/home/jim/query/UPROCL/test/bob/dircut.sh
/home/jim/query/UPROCL/test/bob
/home/jim/query/UPROCL/test/
Can some tell me what is wrong with my sed command as it is not cutting down to
/home/jim/query/UPROCL/
Because * is greedy. You want to be more selective about what characters are allowed following "UPROC" -- any non-slash
Not
sed 's/\(UPROC.*\/\).*/\1/'
but
sed -r 's,(UPROC[^/]*/).*,\1,'
Using different delimiters for the s/// command reduces the "leaning toothpick" problem.
Because the .* in the () is matching to the / at the end of test/.
You need [^/]* instead of . to not match any slashes.
When you want to know in which directory you are, why don't use pwd?
One thing which might be useful: the command pwd shows the value of the environment variable PWD (uppercase). In case you want to use the current directory as a value, you might use this.
I am experimenting with wildcards in bash and tried to list all the files that start with "xyz" but does not end with ".TXT" but getting incorrect results.
Here is the command that I tried:
$ ls -l xyz*[!\.TXT]
It is not listing the files with names "xyz" and "xyzTXT" that I have in my directory. However, it lists "xyz1", "xyz123".
It seems like adding [!\.TXT] after "xyz*" made the shell look for something that start with "xyz" and has at least one character after it.
Any ideas why it is happening and how to correct this command? I know it can be achieved using other commands but I am especially interested in knowing why it is failing and if it can done just using wildcards.
These commands will do what you want
shopt -s extglob
ls -l xyz!(*.TXT)
shopt -u extglob
The reason why your command doesn't work is beacause xyz*[!\.TXT] which is equivalent to xyz*[!\.TX] means xyz followed by any sequence of character (*) and finally a character in set {!,\,.,T,X} so matches 'xyzwhateveryouwant!' 'xyzwhateveryouwant\' 'xyzwhateveryouwant.' 'xyzwhateveryouwantT' 'xyzwhateveryouwantX'
EDIT: where whateveryouwant does not contain any of !\.TX
I don't think this is doable with only wildcards.
Your command isn't working because it means:
Match everything that has xyz followed by whatever you want and it must not end with sequent character: \, .,T and X. The second T doesn't count as far as what you have inside [] is read as a family of character and not as a string as you thought.
You don't either need to 'escape' . as long as it has no special meaning inside a wildcard.
At least, this is my knowledge of wildcards.
I'm trying to use the rename command in a Terminal in Ubuntu to append a string to the beginning of some avi file names as follows.
rename -n 's/(\w)\.avi$/String_to_add__$1\.avi/' *.avi
So I expect the following:
String_to_add_MyMovie.avi
Problem is that when I run the command it appends the string to the end of the file name, so I end up with the following:
MyMovie_String_to_add_.avi
I'm not sure if I have the perlexpr syntax wrong or something else. Any insight is appreciated.
UPDATE:
Thanks for the suggestions, I tried the suggestions from alno and plundra and made the following modification:
rename -n 's/(\w+)\.avi$/String_to_add__$1\.avi/' *.avi
But now the file gets the string inserted in the middle of the name as follows:
My_String_to_add_Movie
My apologies though, I neglected to mention that the titles are preceded by 3 numeric values, so the file name nomenclature is {3 numbers}-My_Movie.avi so for example 001-My_Movie.avi. But I didn't think this would make a difference since I'm assuming \w+ matches alphanumeric characters, might the '-' be the issue?
Haven't tried Christian's approach yet, I want to be able to use the rename command, or at least understand why it's not working before I try a different approach.
I don't think rename -n is standard. You could do this:
for i in *.avi; do mv $i String_to_add_$i; done
You're only matching a single character with \w, you want \w+, so the complete line would be:
rename -n 's/(\w+)\.avi$/String_to_add__$1\.avi/' *.avi
Correct version:
rename -n 's/(\w+)\.avi$/String_to_add__$1\.avi/' *.avi
You simply forgot + after \w, so it tried to match only one character.