I get an "Unknown Error" when I click on any of the web parts in the gallery. What can cause this?
Thanks,
Eric
Some webparts require configuration prior to them working propery. In these cases you need to add the webpart to a page and click the drop down and configure what ever it asks for. The other possibility is that you did not deploy the webpart correctly or you are missing something that it is looking for.
Related
I have created a "Team Site" on SharePoint online. When I edit a site page, I am not able to view any option of adding a web part on the page. All I can see are following options. Please click the link to see the options. I don't see any web part option there.
I believe there are some features that need to be activated on this site collection. Does anybody know which features need to be activated here to enable web parts on the page?
Unfortunately, WebPart doesn't work in New Experience. You need to be in Classic View to add the WebPart.
You can't add web part to New experience mode Sharepoint page. At least not for now. But you can create a page in Classic mode, it's the same as it was in SP2013.
How to do it - Read this article
I have created a test website that contains a single ASP.net index.aspx file that contains a gridview listing information from a MSSQL database.
I would like to have this made available as a webpart on our sharepoint intranet, how would I go about doing that?
You can just put your page under Template/Layouts and attach it to some SharePoint master page. It will look and feel like a regular SharePoint page.
Of course, that is good if you're into the quick&dirty approach :)
You will need to create a web part from the page you already have.
I would suggest isolating your gridview in a user control (ascx) instead of directly on the aspx page, it will be easier to use it in a web part that way.
To create a web part, you should probably start by downloading WSPBuilder or a similar tool that will do most of the work for you.
The following tutorial will give you the information you need on how to create a web part from a user control.
You should have no problem linking to your database or anything else. A web part behaves just like a user control.
Does anybody know how to find offending web part which causes this error ?
“A Web Part or Web Form Control on this Web Part Page cannot be displayed or imported because it is not registered on this site as safe.”
I have inherited an old SharePoint 2003 portal site which uses custom web parts.
I know what this error means. I also know that each web part must be installed and registred as safe in web.config. The problem is that I don't know which one is missing.
I get same error when I'm trying to open the page in FrontPage as well.
Use contents=1 in QueryString to disable/remove WebParts from page that causes errors.
stsadm.exe -o enumallwebs -includewebparts
http://sharepointreporter.wordpress.com/
Requires updating to Sp2 I believe, for this command to be available. Problematic web parts will appear as 'Missing' in the resultant list.
Go to Event Viewer of the machine and you shall be able to see Error entries. Out of tons of entries you have to find out the entries related to you and you shall be able to see the names of the webparts that the sharepoint site is trying to load but fails. If you shall read the complete description of the error entry in the Event Viewer, it will give you version and even PublicKey Token of the webpart as well.
I hope this helps!!!
Try reading this:
http://www.bluedoglimited.com/SharePointThoughts/ViewPost.aspx?ID=189
It should give you some clues to solving the problem. Essentially you have a control that is not marked as safe and it is failing. You can most likely config it to work, but the link above has other possible solutions.
in your url just append content=1. This will give you the all the webparts that are deployed. Now, you can keep deleting each of the webpart to find which one is causing issue ( ensure that you know to add the web parts back).
For example: if Url is http://localhost:9000/default.aspx, try with http://localhost:9000?contents=1
Alternatively, try to create a new webpart page,add web parts that are there on your actual page and check which one is causing issue. This will avoid changes to the actual page.
Hope this helps.
I've just suggested this same answer on MSDN:
This stsadm helped me in finding where the webpart was referenced in any way:
stsadm -o enumallwebs -includewebparts > C:\temp\somelog.txt
Then you can see the web part is listed under some <Web Id=... Url=...> XML node, i.e. you know the "culprit" web site.
At that point, some reasons I've found for those forgotten references:
the webpart is used in some sub-site of the culprit website, and the sub site is hidden from the quick list or top bar
the webpart has been deleted from the culprit website, but it still is in the "site collection recycle bin". You can reach that by going to the normal website recycle bin, then look for its link on the top bar description ("Use this page to restore items that..."). By the way, this site collection recycle bin has two views itself: be sure to check them both.
In both cases, I got some help by browsing the culprit website with SharePoint Manager. With that I could easily spot the existence of a forgotten subsite, as well as the existence of this "second level recycle bin".
HTH
Inside SharePoint I've previously created a site template by appending _layouts/savetmpl.aspx to the end of my site and new sites have been created correctly and work as expected.
I've now come to do the same thing again and yet this time the new site is throwing an error relating to the page layout.
The error is:
This page is not using a valid page layout. To correct the problem, edit page settings and select a valid page layout.
When I try to select a different one, there is only the one to select. This page layout is in use on other sites and they render fine.
Has anyone else seen this issue?
All the best
First, if you append the _layouts/savetmpl.aspx tho the url, i suppose you dont have it in the Site Settings options, so you are using a Publishing site. This is because Microsoft doesn´t support this option (save as template in publishing sites). And they dont support it because it has some bugs, for sure.
So, I would recommend not using this option in important sites, or if you plan to ask support to Microsoft in the future.
However that error indicates that the page layout or his associated content type (ou parent content types) are not correctly installed in the site collection. Are you using your own (custom) content types? Please confirm if the ID of the associated content type (something like 0x0100C6739B7D12DE419aA2F9A2F96CC26818) is exactly the same in the Page Layout on working sites and in the not working sites.
Hope it helps
Do the sites/site collection where the templates working have all the same features enabled as teh sites/site collection where the template isn't working?
Can you check the server logs? <12 hive>\LOGS
Did you add a custom page layout, use it, and then forget to check that "save content" checkbox when you saved your template?
I am having an issue with the drag and drop of webpart in sharepoint. The following described what I have done:
I am using MOSS 2007.
Created some custom page layouts that's based on the original BlankWebPartPage.aspx and tweaked to matched our HTML carve.
Created custom web parts.
attached those web parts to the pages that's based on the custom layout.
Now the web parts are working fine, except for the part that it cannot be dragged and drop to other web parts container on the same page.
If anyone can show me:
1. How to diagnose the issue on what's causing it?
2. Is the drag and drop supposed to work on a custom layout?
3. What's the error that's causing it not to work?
Thanks in advance!
Is this the issue you're experiencing: http://blog.mastykarz.nl/css-causes-javascript-error-while-moving-web-parts-in-edit-mode/?
Yeah that's the one exactly! There is another link in there:
http://neilmosafi.blogspot.com/2007/11/sharepoint-dragging-webparts-causes.html
That link shows a javascript to fix the issue.
You might try dragging into the "add web part" portion of the container of zone. I've had issues with dragging the web parts into position, particularly custom web parts.
Also, can you post some code? Particularly the page layout. Feel free to clip out the most non-essential parts, but it should help to diagnose your problem.